Abstract
Path planning includes three tasks: 1–Defining a geometric curve for the end-effector between two points. 2–Defining a rotational motion between two orientations. 3–Defining a time function for variation of a coordinate between two given values. All of these three definitions are called path planning. Figure 13.1 illustrates a path of the tip point of a 2R manipulator between points P1 and P2 to avoid two obstacles.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Asada, H., and Slotine, J. J. E., 1986, Robot Analysis and Control, John Wiley & Sons, New York.
Fahimi, F., 2009, Autonomous Robots: Mdeling, Path Planing, and Control, Springer, New York.
Murray, R. M., Li, Z., and Sastry, S. S. S., 1994, A Mathematical Introduction to Robotic Manipulation, CRC Press, Boca Raton, Florida.
Niku, S. B., 2001, Introduction to Robotics: Analysis, Systems, Applications, Prentice Hall, New Jersey.
Spong, M.W., Hutchinson, S., and Vidyasagar, M., 2006, Robot Modeling and Control, John Wiley & Sons, New York.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2010 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Jazar, R.N. (2010). Path Planning. In: Theory of Applied Robotics. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-1750-8_13
Download citation
DOI: https://doi.org/10.1007/978-1-4419-1750-8_13
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-1749-2
Online ISBN: 978-1-4419-1750-8
eBook Packages: EngineeringEngineering (R0)