Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Muralt, P., Ferroelectric thin filmsfor micro-sensors and actuators: a review. J. Micromech. Microeng., 2000. 10: p. 136–146.
Piezoelectric Materials and Devices, Edited by N. Setter, Lausanne 2002.
Miyahara, Y., PZT cantilever for non-contact atomic force microscopy. Appl. Surf. Sci., 1999. 140: p. 428–431.
P Muralt, PZT thinfilmsfor microsensors and actuators: Where do we stand? IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000. 47(4):903–915.
M. Elwenspoek, H. Jansen, Silicon micromachining, C.U. Press. 1998.
W. Lang, Silicon micromachining technology, Materials Science and Engineering, R17 (1996) 1–55.
Madou, M., Fundamentals of Microfabrication. 1997, Boca Raton: CRC Press.
Gross, S.J., et al., Reliable integration of piezoelectric lead zirconate titanate with MEMS fabrication process. Proceedings of the SPIE, 2001. 4558: p. 72.
J. Baborowski, N. Ledermann and P. Muralt, Micromachining of Piezoelectric MEMS, TRANSDUCERS ‘01 EUROSENSORS XV, The 11th International Conference on Solid-State Sensors and Actuators, Munich, 2001, p. 596–600.
P. Muralt et al., Integration of Piezoelectric Pb(Zr x Ti 1−x ))O 3 (PZT) thin films into micromachined sensors and actuators, in Materials and Process Integration for MEMS, P.F.E.H. Tay, Editor. 2002, Kluwer Academic Publishers, The Netherlands, p. 3–27.
Handbook of Chemistry and Physics, CRC, D.R. Lide Ed., CRC Press, 1995.
DeVoe, D.L. and A.P. Pisano. A Fully Surface-Micromachined Piezoelectric Accelerometer in Transducers ‘97, International Conference on Solid-State Sensors and Actuators. 1997. Chicago.
Kim, J.H., et al., Fabrication Process of PZT Piezoelectric cantilever unimorphs using surface micromachining. Integrated Ferroelectrics, 1997. 15: p. 325–332.
Flynn, A.M., et al., Piezoelectric micromotorsfor microrobots. J. Microelectromechanical Sytems, 1992. 1: p. 44–51.
Dubois, M.-A. and P. Muralt, PZT Thin Film Actuated Elastic Fin Micromotor. IEEE Transactions on UFFC 1998. 45(5), p. 1169–1177.
Racine, G.-A., P Muralt, and M.-A. Dubois, Flexural-standing-wave elastic force motor using ZnO and PZT thin film on micromachined silicon membranes for wristwatch applications. Smart Mater. Struct., 1998. 7: p. 404.
Baborowski, J., et al., Fabrication and Characterization of Micromachined Accelerometers based on PZT thin films. Ferroelectrics, 1999. 224: p. 283–290.
Kunz, K., P. Enoksson, and G. Stemme, Highly sensitive triaxial silicon accelerometer with integrated PZT thin film detectors. Sensors and Actuators A, 2001. 92: p. 156–160.
Lee, S.S. and R.M. White, Piezoelectric cantilever acoustic transducer. J. Micromech. Microeng., 1998. 8: p. 230–238.
Schroth, A., et al., Application of sol-gel deposited thin PZT film for actuation of 1D and 2D scanners. Sensors and Actuators A, 1999. 73: p. 144–152.
Lee, C., T. Itoh, and T. Suga, Self-excited piezoelectric PZT microcantileversfor dynamic SFM—with inherent sensing and actuating capabilities. Sensors and Actuators A, 1999. 72: p. 179–188.
Bernstein, J.J., et al., Micromachined high frequency ferroelectric sonar transducers. IEEE Tran. UFFC, 1997. 44(5): p. 960–969.
Baborowski J., Ledermann N., Muralt P, Piezoelectric Micromachined Transducers (pMUT’p) based on PZT thin films, in Proceedings of IEEE Ultrasonic Symposium, Münich, Germany, 2002.
Maeder, T., L. Sagalowicz, and P. Muralt, Stabilized Platinum Electrodes for Ferroelectric Film Deposition using Ti, Ta and Zr Adhesion Layers. Jpn. J. Appl. Phys., 1998. 37, p. 2007–2012.
Muralt, P., et al., Texture control of PbTiO 3 and Pb(ZrTi)O 3 thin films with TiO 2 seeding. J. Appl. Phys., 1998. 83(7): p. 3835–3841.
Maeder, T., et al., Pb(ZrTi)O 3 Thin Films by In-situ Reactive Sputtering on Micromachined Membranes for Micromechanical Applications. British Ceram. Proc., 1995. 54: p. 206–218.
Kloeck, B., et al., Study of electrochemical etch-stop for high-precision thickness control of silicon membranes. IEEE Transactions on Electron Devices, 1989. 36(4): p. 663–669.
Fluckiger, P., et al., Standard processes at the Center of Microtechnology—EPFL. 2002, http://microtechnique.epfl.ch/cmi/.
J. Hopwood, Review of inductively coupled plasmas for plasma processing, Plasma Sources Science and Technology, 1, 109–116.
Baborowski, J., P. Muralt, and N. Ledermann, Etching of platinum thin films with dual frequency ECR/RF reactor. Integrated Ferroelectrics, 1999. 27: p. 243–256.
Baborowski, J., et al., Etching of RuO 2 and Pt thin films with ECR/RF reactor. Vacuum, 2000. 56: p. 51–56.
M. Sugawara, Plasma Etching Fundamentals and Applications, Oxford Science Publications, 1998.
S. Marks, L. G. Jerde, G. Celii, S. A. Aggarwal and J. S. Martin, High Temperature Plasma Etching Characteristics of Sub-Micron Ir/PZT/Ir Ferroelectric Capacitor Stacks, Proceedings of ISAF 2002, Nara.
http://www.tegal.com/news_events/nr/nr020718.html
Lee, E., et al., Effects of top electrode annealing on the PZT thin film. Integrated Ferroelectrics, 1997. 16: p. 165–174.
Troiler-McKinstry, S., et al. Etched piezoelectric structures. in International Symposium of Applied Ferroelectrics, ISAF. 1986. Bethlehem.
H. Macé, H. Achard, L. Peccoud, Reactive ion etching of Pt/PZT/Pt ferroelectric thin film capacitors in high density DECR plasma, Microelectronic Engineering 29 (1995) 45–48.
Zeto, R., et al., Dry etching of sol-gel PZT. Mat. Res. Soc. Symp. Proc., 1999. 546: p. 159–164.
Pan, W., et al., Reactive ion etching of PZT and RuO 2 films by environmentally safe gases. J. Mater. Res., 1994. 9(11): p. 2976–2980.
Chung, C.W., Reactive ion etching of PZT thin films in inductively coupled plasma. J. Vac. Sci. Technol. B, 1998. 16(4): p. 1894–1900.
Jung, J.-K. and W.-J. Lee, Dry etching of PZT films in CF 4 and Cl 2 /CF 4 inductively coupled plasmas. Jpn. J. Appl. Phys., 2001. 40: p. 1408–1419.
Chee Won Chung, Yo Han Byun, Hye In Kim, Inductively coupled plasma etching of Pb(Zr x , Ti 1−x )O 3 thin film in a HBr/Ar plasma, Microelectronic Engineering 63 (2002) 353–361.
Williams, K., et al. Reactive ion beam etching of ferroelectric materials using a RF inductively coupled ion beam source. in IEEE International Symposium on Application of Ferroelectrics (ISAF’96). 1996.
Boukari, F., et al., A very compact electron cyclotron resonance ion source. Rev. Sci. Instrum., 1994. 65(4): p. 1097–1099.
Baborowski, J., et al., Mechanisms of Pb(Zr 0.53 Ti 0.47 O 3 Thin Film Etching with ECR/RF Reactor. Integrated Ferroelectrics, 2000. 31: p. 261–271.
Myoung-Gu Kang, Kyoung-Tae Kim, Chang-Il Kim, Recovery of plasma-induced damage in PZT thin film with O 2 gas annealing, Thin Solid Films 398–399 (2001), 448–453.
Myoung-Gu Kang, Kyoung-Tae Kim, Chang-Il Kim, Plasma Induced damage in PZT thin films etched by inductively coupled plasma, Thin Solid Films 435 (2003), 222–226.
Vossen, J.L. and W. Kern, Thin Film Process, ed. 1. Vol. V-1. 1978, New-York: Academic Press.
R.P. Frankenthal, and D.H. Eaton, J. Electrochem. Soc.: Solid-state science and technology, 1976. 123(5): p. 703–706.
C. Farrell, K. Milkove, C. Wang and D. Kotecki, Integrated Ferroelectrics, Vol. 16, 109–138 (1997).
K.L. Milkove, J.A. Coffin and C. Dziobkowski, J.Vac.Sci.Technol. A16(3), 1483 (1998).
Celli et al., Texas Instruments, Integrated Ferroelectrics, vol. 27, 1999, 227.
Sakoda T. et al., Japanese Journ. Appl. Phys. pI, 40, 2001, 2911.
Chung et al., Integrated Ferroelectrics, vol. 39, 2001, 119.
Chung et al., Journal of Vac. Sc&Technol. A, 19, 2001, 2400.
Chongying Xu et al., Ferroelectric Thin Films VII, MRS, 1999, 129
Chiang MC et al., Electrochemical Society Proceedings, Vol. 99, 2000, 114.
Eunk-Jik Lee, Jin-Woong Kim, Won-Jong Lee, Jpn. J. Appl. Phys. Vol. 37 (1998), pp. 2634.
Wei Pan, S.B. Desu, Phys.Stat.Sol., (a) 161, 201, (1997).
F. Lärmer, and A. Schilp, Patent US6284148: Method for anisotropic etching of silicon. 2001: USA.
Hynes, A.M., et al., Recent advances in silicon etching for MEMS using the ASE™ process. Sensors and Actuators A, 1999. 74: p. 13–17.
Yasseen, A.A., N.J. Mourlas, and M. Mehregany, Chemical-Mechanical Polishing for polysilicon Surface Micromachining. J. Electrochem. Soc., 1997. 144(1): p. 237–242.
I. Ladabaum, X. Jin, B.T. Khuri-Yakub, Miniature drumheads: microfabricated ultrasonic transducers, Ultrasonic 36 (1998) 25–29.
E. Cianci, V. Foglietti, G. Caliano, M. Pappalardo, Micromachined capacitive ultrasonic transducers fabricated using silicon on insulator wafers, Microelectronic Engineering 61–62 (2002) 1025–1029.
G. Percin, B. T. Khuri-Yakub, Piezoelectrically actuated extensional micromachined ultrasound transducers, Ultrasonics 40 (2002) 441–448.
S. Frédérico, C. Hibert, R. Fritschi, Ph. Flückiger, Ph. Renaud, and A.M. Ionescu, Silicon sacrificial layer dry etching (SSLDE)forfree-standing RF MEMS architectures, Proceedings of the 16th IEEE International Conference on Micro Electro Mechanical Systems, Kyoto, Japan, pp. 570–573, 2003.
J. Baborowski, N. Ledermann, P. Muralt, D. Schmitt, Simulation and Characterization of Piezoelectric Micromachined Transducers Based on PZT/SOI Membranes, International Journal of Computational Engineering Science (UCES), Vol. 4,3, 2003, 471–475.
N. Ledermann, P Muralt, J. Baborowski, S. Gentil, K. Mukati, M. Cantoni, A. Seifert, N. Setter, {100} Textured, piezoelectric Pb(Zr x ,Ti 1−x )O 3 thin films for MEMS: integration, deposition and properties, Sensors and Actuators A 105 (2003) 162–170.
Z. Jamie Yao, Shea Chen, Susan Eshelman, David Denniston, Chuck Goldsmish, Microma-chined low-loss microwave switches, IEEE J.Microelectromech. Syst. 8(2) (1999) 129–134.
J.Y. Park, Y.J. Yee, H.J. Nam, J.U. Bu, Micromachined RF MEMS tunable capacitorsfor RF MEMS application, in IEEE MTTT-S International Microwave Symposium Digest, May 2001, 2111–2114.
S. J. Gross, S. Tadigadapa, T. N. Jackson, S. Trolier-McKinstry, Q. Q. Zhang, Lead-zirconate-titanate-based piezoelectric micromachined switch, APPLIED PHYSICS LETTERS, Vol. 83,1, 7 July 2003.
Han Geun Yu, L. Zou, K. Deng, R. Wolf, S. Tadigadapa, S. Trolier-McKinstry Lead zirconate titanate MEMS accelerometer using interdigitated electrodes, Sensors and Actuators A 107 (2003) 26–35.
L. Trupina, J. Baborowski, P. Muralt, V. Meyer, D. Bouvet, P. Fazan and M. Lobet, Tungsten Based Electrodes for Stacked Capacitor Ferroelectric Memories, Jpn. J. Appl. Phys., Vol. 41, Part 1, No. 11B, 30 November 2002 6862–6866.
J. Baborowski et al., Damageless patterning of ferroelectric devices, Proceedings of ISIF 2004, Integrated Ferroelectrics, in press 2004.
S. Bühlmann, B. Dwir, J. Baborowski, P. Muralt, Size effect in mesoscopic epitaxial ferroelectric structures: Increase of piezoelectric response with decreasing feature size; Applied Physics Letters, Vol. 80,17, 2002, 3195.
M. Hiratani, C. Okazaki, H. Hasegawa, N. Sugii, Y. Tarutani, and K. Takagi, Jpn. J. Appl. Phys., Part 1, 36, 5219, 1997.
F. Calame, J. Baborowski, N. Ledermann, P Muralt, Local Growth of Sol-Gel Films by Means of Microhotplates, International Journal of Computational Engineering Science (IJCES), Vol. 4,3, 2003, 563–568.
Pollien, N. Ledermann, J. Baborowski, P Muralt, High Temperature MicroHotplate, Patent, WO 02/080620, 10.10.2002.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer Science+Business Media, Inc.
About this chapter
Cite this chapter
Baborowski, J. (2005). Microfabrication of Piezoelectric MEMS. In: Setter, N. (eds) Electroceramic-Based MEMS. Electronic Materials: Science and Technology, vol 9. Springer, Boston, MA. https://doi.org/10.1007/0-387-23319-9_13
Download citation
DOI: https://doi.org/10.1007/0-387-23319-9_13
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-23310-9
Online ISBN: 978-0-387-23319-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)