Avoid common mistakes on your manuscript.
1 Correction to: Rare Met. https://doi.org/10.1007/s12598-019-01293-4
In the original publication, Fig. 12 was published incorrectly. The correct version of Fig. 12 is given in this correction.
SEM images of fracture surface (longitudinal section): uncoated tensile samples with a fracture end and b cracks initiated from oxide layer; coated samples with platinum layer thicknesses of c 2 µm and d 8 µm in LTHA and e 2 µm and f 8 µm in HTLA methods; IDZ for samples with platinum layer thickness of 8 µm in g LTHA and h HTLA methods (inset being image of needle-like σ phase)
The original article was corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Barjesteh, M.M., Abbasi, S.M., Madar, K.Z. et al. Correction to: Correlation between platinum–aluminide coating features and tensile behavior of nickel-based superalloy Rene®80. Rare Met. (2019). https://doi.org/10.1007/s12598-019-01332-0
Published:
DOI: https://doi.org/10.1007/s12598-019-01332-0