Abstract
The characteristics of the new nitrilase-producing strain Rhodobacter sphaeroides LHS-305 were investigated. By investigating several parameters influencing nitrilase production, the specific cell activity was ultimately increased from 24.5 to 75.0 μmol g−1 min−1, and hereinto, the choice of inducer proved the most important factor. The aromatic nitriles (such as 3-cyanopyridine and benzonitrile) were found to be the most favorable substrates of the nitrilase by analyzing the substrate spectrum. It was speculated that the unsaturated carbon atom attached to the cyano group was crucial for this type of nitrilase. The value of apparent K m, substrate inhibition constant, and product inhibition constant of the nitrilase against 3-cyanopyridine were 4.5 × 10−2, 29.2, and 8.6 × 10−3 mol L−1, respectively. When applied in nicotinic acid preparation, the nitrilase is able to hydrolyze 200 mmol L−1 3-cyanopyridine with 93% conversion rate in 13 h by 6.1 g L−1 cells (dry cell weight).
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
In the past two decades, nitrilases have been acknowledged as useful biocatalysts for the hydrolysis of nitriles in a mild and environmentally friendly manner, which also assure a significantly cleaner process and specificity with high yield. For these reasons, nitrilases have been widely applied in the pharmaceutical, chemical engineering, and agricultural industries [1, 2].
Researchers and scientists started to exploit new nitrilases from many years ago, because of their huge demand in industry. After the first one was discovered in a plant in 1960s [3, 4], an increasing number of nitrilases from different sources have been discovered, especially those from microorganisms, which possesses most in nature [5, 6], such as Acinetobacter, Alcaligenes, Arthrobacter, Bacillus, Nocardia, Pseudomonas, Rhodococcus [7–9], the fungus Fusarium [10, 11], etc. Many of the nitrilases from microorganisms have been applied successfully in industry. For example, the nitrilase from Alcaligenes faecalis ATCC8750 [12] is an effective catalyst for the stereoselective hydrolysis of mandelonitrile to (R)-(−)-mandelic acid and the nitrilase from Acidovorax facilis 72W [13] can convert glycolonitrile to glycolic acid with high efficiency.
Although too many nitrilases are reported and have been applied for manufacturing production, seeking for new sources of nitrilases has never stopped, because there is also a considerable number of undiscovered nitrilases in nature and some of them may have higher activities or may be from new source. For example, Mei Shen isolated a novel nitrilase-producing strain Arthrobacter nitroguajacolicus ZJUTB06-99 [14] from soil samples in Zhejiang province in 2009, which is able to convert acrylonitrile to acrylic acid with high efficiency.
In this paper, the characteristics of a novel isolated nitrilase-producing strain Rhodobacter sphaeroides LHS-305 was investigated, including its morphology, molecular weight, substrate specificity, and the apparent enzyme kinetics. The significant application prospects for producing useful acids were studied.
Materials and Methods
Chemicals
3-Cyanopyridine (AladdinBiotech, China), benzonitrile, phenylacetonitrile, p-methoxy phenylacetonitrile, β-amino propionitrile, and acrylonitrile (Sinopharm Chemical Reagent Co., LtdS, China) were used in this study. All the other chemicals were of analytical grade.
Medium and Cultivation
Seed medium (L): glycerol 3.3 g, yeast extract 5 g, fish peptone 5 g, NaCl 1 g, K2HPO4 2 g, MgSO4 0.2 g, FeSO4·7H2O 0.03 g, acetonitrile 5 mmol.
Enzyme production medium (L): Na2HPO4 2 g, KH2PO4 1 g, glycerol 3.25 g, MgSO4 0.2 g, FeSO4·7H2O 0.03 g, yeast extract 0.5 g, fish peptone 0.5 g, pH 7.0, autoclaved at 115 °C for 20 min.
Acetonitrile was added into the medium as inducer with the concentration of 10 mmol L−1 after seed culture was transferred into the enzyme production medium.
General Procedure of Biotransformation Using Rest Cells
The strain was incubated in seed medium on a rotary shaker at 160 rpm, 30 °C for 24 h. Subsequently, the inoculum (10%, v/v) was transferred into a fresh enzyme production medium for 24 h cultivation. After being collected by centrifugation at 4 °C, 10,000 rpm for 7 min, the cells were washed with sodium phosphate buffer (50 mmol L−1, pH 7.0) and stored at 4 °C.
The standard reaction mixture was composed of 50 mmol L−1 sodium phosphate (pH 9.0), 200 mmol L−1 3-cyanopyridine, and an appropriate amount of the cells or enzyme. Each reaction was carried out at 30 °C for 20 min at 200 rpm in an Erlenmeyer flask and stopped by adding 50% ethanol (v/v) to the reaction mixture. The cells were centrifuged and collected, and washed with distilled water, then dried in an oven at 100 °C to determine the dry cell weight.
Optimization of Culture Conditions for Nitrilase Production
To determine the optimal conditions for nitrilase production, different factors were tested during the cultivation, including temperature (20–37 °C), pH (5.0–9.0), inducers, etc. First, 10 mmol L−1 inducers were added into the enzyme production medium at the beginning of the cultivation at 30 °C and pH 7.0. Subsequently, all factors influencing enzyme production were analyzed by changing one factor at a time.
Characteristics of Nitrilase in Cells as a Biocatalyst
The specific cell activity was determined in the pH range of 4.0–10.6 at 30 °C, using the buffers Na2HPO4/KH2PO4 (pH 4.92–9.18) and Na2CO3/NaHCO3 (pH 8.77–10.57).
The thermostability of intracellular nitrilase was assessed at temperature of 30 °C, 37 °C, and 50 °C. The rest cells were stored in the temperatures above, whose 3-cyanopyridine hydrolyzing activities were determined every 10 h under the optimum conditions. The half-life of the nitrilase was estimated according to the presence of the specific cell activity at each temperature, which was plotted against time.
The following nitrile compounds were tested for substrate specificity under optimum reaction conditions: 3-cyanopyridine, benzonitrile, phenylacetonitrile, p-methoxy-phenylacetonitrile, mandelonitrile, Acrylonitrile, β-amino propionitrile, and butyronitrile.
Reaction of 3-Cyanopyridine to Nicotinic Acid in a Batch Reactor by R. sphaeroides
The R. sphaeroides LHS-305 was used to catalyze 3-cyanopyridine in a batch reactor under optimum operational conditions to achieve the highest conversion rate with 6.1 g L−1 cells (dry cell weight) under six different concentrations of substrates (50–500 mmol L−1).
Separation of R. sphaeroides LHS-305 Nitrilase
All steps were performed at 4 °C. Potassium phosphate pH 9.0 was used as buffer and centrifugation was carried out for 90 min at 20,000×g in all purification steps. Cells from the culture broth were rinsed twice with buffer and suspended in 50 mmol L−1 buffer, disrupted with an ultrasonic oscillator and then centrifuged. The supernatant was fractionated by ammonium sulfate precipitation (20–50%). The farther separations were carried out by hydrophobic chromatography (Phenyl Sepharose, 20 mmol L−1 Tris–HCl buffer pH 7.2, 0.8–0 mol L−1 ammonium sulfate gradient elution) and gel filtration chromatography (Sephacryl S-200 HR, 50 mmol L−1 potassium buffer pH 7.2). The fractioned samples were detected by activity analysis and SDS–PAGE.
Analytical Methods
The nicotinic acid, the product of the reaction mixture, was quantitatively analyzed through an HPLC system (Agilent) equipped with C18 reverse phase column (4.6 × 250 mm), and loaded with the mobile phase, 0.01 M H3PO4 buffer (pH 2.0)/acetonitrile (95:5, v/v) flowing at a rate of 0.8 ml min−1 at room temperature.
One unit of specific cell activity is expressed as 1 μmol g−1 min−1, defined as 1 μmol of nicotinic acid released by 1 g of dry cell weight in 1 min under optimum reaction conditions and 1 U of the enzyme activity per volume (u L−1) for the cell culture is defined as 1 μmol of nicotinic acid released by 1 L cell culture or enzyme solution in 1 min.
Results and Discussion
Morphological Characteristics and Background of the Strain
In a previous work, the strain LHS-305 was isolated from soil samples after enrichment with glycerol as the carbon source and 3-cyanopyridine as nitrogen source [15]. The strain was identified as R. sphaeroides through analysis of the 16S rDNA sequence and physiological and biochemical experiments.
It was easy to cultivate the strain in rich medium (such as seed medium). Colonies cultivated on agar plates were light yellow, convex, smooth, dry, and with a single edge. The cells were in the form of rods, with a length of about 0.8–1.0 μm, with capsules and gram negative.
R. sphaeroides is a purple non-sulfur phototrophic bacterium, belonging to the α-3 subgroup of the Proteobacteria [16]. The strain was originally collected from Delft, Holland, and California from a variety of enrichment cultures. Members of R. sphaeroides exhibit substantial metabolic versatility [17] and genomic complexity. Under aerobiosis, R. sphaeroides grows as a chemoheterotroph, possessing a terminal respiratory chain, and morphologically resembles a typical gram-negative bacterium [18]. R. sphaeroides has been shown to detoxify a number of metal oxides and oxyanions. At present, it is the subject of intensive investigations worldwide as regards the structure, function, and regulation of its photosynthetic membranes, its mechanisms for CO2 fixation, nitrogen fixation, cytochrome diversity, and electron transport systems. A considerable number of applications are reported for this bacterium, such as coenzyme Q10 production [19, 20], biohydrogen production [21, 22], and biodegradation of chlorobenzene [23] from industrial wastewater.
Identification of R. sphaeroides LHS-305 Nitrilase
The previous work showed that the free cells of R. sphaeroides LHS-305 exhibited nitrile-hydrolyzing activity towards 3-cyanopyridine without any nicotinamide detected, and was not active towards nicotinamide.
With the purpose of identification for the enzyme, preliminary separation was performed. The separated enzyme gave only one band on sodium dodecyl sulfate/polyacrylamide gel electrophoresis analysis, corresponding to a molecular mass of 38 kDa (Fig. 1). The enzyme was able to hydrolyze 3-cyanopyridine to nicotinic acid without any nicotinamide formed and did not show any activity towards nicotinamide. Consequently, it can be concluded that the enzyme showed nitrilase activity and could be identified as nitrilase.
Optimization of Nitrilase Production Conditions
The initial specific cell activity and enzyme activity per volume of the cell culture induced by 3-cyanopyridine was 24.5 μmol g−1 min−1 and 58.8 u L−1, respectively at pH 7.0, 30 °C. Several parameters were optimized for nitrilase production such as temperature, ions, pH (data not shown), inducers, etc., among which inducer types play the most important role. Acetonitrile was proven to be the best inducer, which caused the enhancement of the specific cell activity to 65.3 μmol g−1 min−1, more than twice of that induced by the initial inducer 3-cyanopyridine (Table 1). Table 1 also showed that phenylacetamide caused the highest enzyme activity per volume for the cell culture with the value of 155.0 u L−1, but we finally chose acetonitrile as the inducer for the cultivation, because of its cheaper price and good effectivity. Other factors, including pH, temperature (Fig. 2), ions, etc., were also investigated and the specific activity of cells was improved from 65.3 to 75.0 μmol g−1 min−1. The result showed that all other factors were not as significant as the inducer. Finally, the optimum pH and temperature were established as 7.0 °C and 28 °C, respectively, and the best ion for nitrilase production was Fe2+. Several ions, including Fe2+, Mn2+, Cu2+, Zn2+, and Co2+, were tested for the optimization and the culture added Fe2+ led to highest enzyme activity, so Fe2+ was considered as the best ion for nitrilase production. After the optimization of all factors for nitrilase production, the specific activity of cell was enhanced from 24.5 to 75.0 μmol g−1 min−1, with the activity of culture from 58.8 to 155.0 u L−1.
Characteristics of the Nitrilase in Rest R. sphaeroides LHS-305 Cells as a Biocatalyst
Effects of Different pH on the Specific Cell Activity
Figure 3 showed that R. sphaeroides preferred alkalescent conditions rather than neutral in biocatalytic reaction. When Na2HPO4/KH2PO4 buffer (pH 9.0) used, the cells exhibited the highest activity at 75.0 μmol g−1 min−1. When the reaction was carried out in the buffer Na2CO3/NaHCO3 at higher pH [10, 11], a sharp decrease of the specific cell activity was observed. Hence, the optimum pH 9.0 buffer Na2HPO4/KH2PO4 was selected as the best one. Usually, the hydrolysis of nitriles by nitrilase was generally performed in neutral environments, with pH ranging from 6.0 to 8.0. An example is that from Arthrobacter nitroguajacolicus ZJUTB06-99, which catalyzes acrylonitrile to acrylic acid at the optimum pH of 6.5 [14].
Thermostability of the R. sphaeroides as a Biocatalyst
The specific cell activity was determined at intervals when strains were stored at temperatures 30 °C, 37 °C, and 50 °C as shown in Fig. 4. The half-life (t 1/2) of biocatalyst at each temperature was calculated according to the specific cell activity curve against time and found to be 25 h (30 °C), 21 h (37 °C), and 8 h (50 °C). Therefore, the R. sphaeroides as a nitrilase-producing strain is unable to endure high temperatures since the specific cell activity decreased sharply at 50 °C. However, there are also some nitrilases which possess both good thermal stability and 3-cyanopyridine hydrolyzing activity in nature, such as that produced by Bacillus pallidus Dac521, which demonstrated an optimum temperature of 60 °C to convert 3-cyanopyridine [24].
For most enzymatic reaction, the higher the temperature, the higher the activity that could be achieved, but enzymes may be inactivated rapidly as the temperature goes up. The strain studied in this paper is in that case. Consequently, 30 °C was selected for the catalytic reaction in further studies.
Substrate Spectrum
Currently, three types of nitrilases have been reported according to the characteristics of the hydrolyzed nitriles, namely aliphatic nitrilases, aromatic nitrilases, and arylacetonitrilases [25]. Most nitrilases belong to one or two kinds of them, although particular cases exist, such as that in Bacillus subtilis ZJB-063 [26] which exhibited the hydrolyzing activities against almost all kinds of nitriles. In Table 2, eight substrates were studied and it was found that the R. sphaeroides nitrilase could hydrolyze the aromatic nitriles like 3-cyanopyridine and benzonitrile effectively, but the activity against benzonitrile was not as high as that towards 3-cyanopyridine. This is probably due to the toxicity of the latent solvent (DMSO, 4%), which is used to increase the solubility of benzonitrile. No products were found when phenylacetonitrile and p-methoxy phenylacetonitrile served as substrates for the reaction, so was β-amino propionitrile. However, acrylonitrile (aliphatic nitrile) was hydrolyzed at the activity of 22.0 μmol g−1 min−1, which indicates that the nitrilase of R. sphaeroides was active against some of the aliphatic nitriles as substrates. It was speculated that the structure of acrylonitrile with unsaturated carbon atom could be the reason. These substrates had conjugated double bonds offered by the cyano group and its neighbor group: aromatic nucleus or alkyl group with a double bond. Consequently, the R. sphaeroides nitrilase might prefer certain nitriles with the cyano group attached to unsaturated carbon atom.
Apparent Kinetics of the Biocatalyst for the Hydrolysis of 3-Cyanopyridine
In Fig. 5, the initial reaction velocity of the rest cell was examined under 3-cyanopyridine’s concentrations of 100–600 mmol L−1. The results suggested that substrate inhibition appeared when the substrate concentration exceeded 400 mmol L−1, and the initial reaction velocity decreased dramatically when the 3-cyanopyridine’s concentration increased more. However, the relationship between the velocity and the 3-cyanopyridine’s concentration showed clear linearity when 3-cyanopyridine is below 400 mmol L−1, as illustrated by the Lineweaver–Burk plot [27–29] in Fig. 6. Meanwhile, apparent K m and r max were given as 4.5 × 10−2 mol L−1 and 7.7 × 10−5 mol L−1 min−1, respectively. Subsequently, MATLAB (7.0) was applied to calculate the apparent substrate inhibition constant K I through Eq. 1 using the least-squares estimation which is estimated to be 29.2 mol L−1. The results indicate that R. sphaeroides nitrilase did not exhibit a high affinity against 3-cyanopyridine due to its high K m value compared with other nitrilases, such as that in Pseudomonas putida with a K m of 3.61 × 10−3 to 13.39 × 10−3 mol L−1 towards three different substrates. Consequently, although the R. sphaeroides possessed high 3-cyanopyridine hydrolyzing activity, a zero-order reaction could not be obtained easily because of the low substrate affinity. The apparent r max was attained when the substrate concentration was significantly higher than the K m value. However, for the R. sphaeroides nitrilase, the high concentration was unfavorable when it exceeded 400 mmol L−1 due to the substrate inhibition (Table 3).
The typical product inhibition is shown in Fig. 7. The experimental data fitted the curve well, which is described by Eq. 2. The product inhibition constant K PI was then estimated at 8.6 × 10−3 mol L−1 using the method above.
The highest initial reaction velocity appeared when 400 mmol L−1 substrate was added into the buffer (Fig. 5), which means that the nitrilase showed the highest activity at that substrate concentration. Table 3 shows several nitrilase-producing strains which possess the ability to hydrolyze 3-cyanopyridine, such as Nocardia globerula NHB-2, B. pallidus Dac52, and Rhodococcus sp. NDB 1165 [30–32]. It is found that the nitrilase’s specific cell activity from R. sphaeroides LHS-305 is 75 μmol g−1 min−1, a little lower than others, but it shows the best substrate tolerance. Among them, only B. pallidus Dac521 nitrilase could convert 3-cyanopyridine at the high concentration of 300 mmol L−1, and all others showed weak 3-cyanopyridine tolerance (Table 3). This property of the enzyme suggests that it is with great potentiality for industry production of nicotinic acid, because high substrate concentration is of great benefit of enhancing production efficiency and reducing the cycle time.
Application of R. sphaeroides LHS-305 to Convert 3-Cyanopyridine in a Batch Reactor
In Table 4, 3-cyanopyridine could be hydrolyzed almost completely with concentrations below 100 mmol L−1 using 6.1 g L−1 cells (dry cell weight), while incomplete conversion was obtained when the substrate concentration exceeded 200 mmol L−1. As described above, both substrate and product inhibition existed. High substrate concentrations (above 400 mmol L−1) could decrease the reaction rate at the beginning, and the effect of product inhibition increased as the reaction progressed. Considering that the effect of inhibition could be lowered by high cell concentration, a high density of cells (6.1 g L−1, dry cell weight) was used. A 200 mmol L−1 substrate concentration was finally selected for future application in the batch reactor due to its high conversion rate of 93%.
Conclusions
In summary, an isolated nitrilase-producing R. sphaeroides was identified in hydrolyzing aromatic nitriles such as 3-cyanopyridine. The specific cell activity against this substrate was established at 75.0 μmol g−1 min−1 after optimization of the enzyme production and reaction conditions. Although the activity was not higher than the strains reported performing nitrilase activity towards 3-cyanopyridine, the strain showed the best 3-cyanopydine tolerance, which was very important for industrial production of nicotinic acid. This shows that the R. sphaeroides LHS-305 as a nitrilase-producing strain could serve as a good biocatalyst. By comparing the conversion rate in batch reactions, concentration of 200 mmol L−1 was considered as the most suitable for the substrate. Both the nitrilase’s substrate and product inhibition exists towards 3-cyanopyridine, and the product inhibition effects more on the reaction, which should be considered when the nitrilase was applied in bioreactors. In future, further researches could be taken in the significant application prospects for producing this useful acid.
References
Singh, R., Sharma, R., Tewari, N., Geetanjali, & Rawat, D. S. (2006). Nitrilase and its application as a ‘green’ catalyst. Chemistry and Biodiversity, 3, 1279–1287.
Thuku, R. N., Brady, D., Benedik, M. J., & Sewell, B. T. (2009). Microbial nitrilases: Versatile, spiralforming, industrial enzymes. The Society for Applied Microbiology, J Appl Microbiol, 106, 703–727.
Thimann, K. V., & Mahadevan, S. (1964). Nitrilase. I. Occurrence, preparation, and general properties of the enzyme. Archives of Biochemistry and Biophysics, 105, 133–141.
Mahadevan, S., & Thimann, K. V. (1964). Nitrilase. II. Substrate specificity and possible mode of action. Archives of Biochemistry and Biophysics, 107, 62–68.
Piotrowski, M. (2008). Primary or secondary? Versatile nitrilases in plant metabolism. Phytochemistry, 69, 2655–2667.
Howden, A., Jill Harrison, C., & Preston, G. (2009). A conserved mechanism for nitrile metabolism in bacteria and plants. The Plant Journal, 57, 243–253.
Arnaud, A., Galzy, P., & Jallageas, J. (1976). Nitrilase activity in several bacteria. C. R. Acad. Sci. Hebd. Seances Acad Sci, 283, 571–573.
Cowan, D., Cramp, R., Pereira, R., Graham, D., & Almatawah, Q. (1998). Biochemistry and biotechnology of mesophilic and thermophilic nitrile metabolizing enzymes. Extremophiles, 2, 207–216.
Banerjee, A., Sharma, R., & Banerjee, U. C. (2002). The nitrile-degrading enzymes: Current status and future prospects. Appl Microbiol Biot, 60, 33–44.
Harper, D. B. (1977). Fungal degradation of aromatic nitriles. Enzymology of C–N cleavage by Fusarium solani. Biochemical Journal, 167, 685–692.
Nolan, L. M., Harnedy, P. A., Turner, P., Hearne, A. B., & O’Reilly, C. (2003). The cyanide hydratase enzyme of Fusarium lateritium also has nitrilase activity. FEMS Microbiology Letters, 221, 161–165.
Rey, P., Rossi, J. C., Taillades, J., Gros, G., & Nore, O. (2004). Hydrolysis of nitriles using an immobilized nitrilase: Applications to the synthesis of methionine hydroxy analogue derivatives. J Agr Food Chem, 52, 8155–8162.
Ben Bassat, A., Walls, A., Plummer, M., Sigmund, A., Spillan, W., & DiCosimo, R. (2008). Optimization of biocatalyst specific activity for glycolic acid production. Advanced Synthesis and Catalysis, 350, 1761–1769.
Shen, M., Liu, Z. Q., Zheng, Y. G., & Shen, Y. C. (2009). Enhancing endo-nitrilase production by a newly isolated arthrobacter nitroguajacolicus ZJUTB06-99 through optimization of culture medium. Biotechnol Bioproc E, 14, 795–802.
Yang, C. S., Jin, C., Zhou, W. Y., Wang, X. D., & Wei, D. Z. (2010). Screening of new nitrilase-producing strains with high activity of hydrolyzing 3-cyanopyridine. Journal of East China University of Science and Technology(Natural Science Edition), 5, 645–650.
Woese, C. R., Stachebrandt, E., Weisburg, W. G., Paster, B. J., Madigan, M. T., Fowler, C. R. M., et al. (1984). The phylogeny of the purple bacteria: The α subdivision. Systematic and Applied Microbiology, 5, 315–326.
Gest, H. (1972). Energy conservation and generation of reducing power in bacterial photosynthesis. Advances in Microbial Physiology, 7, 243–282.
Eraso, J. M., & Kaplan, S. (1994). prrA, a putative response regulator involved in oxygen regulation of photosynthesis gene expression in Rhodobacter sphaeroides. Journal of Bacteriology, 176, 32–43.
Hossein Shahbani, Z., & Kambiz Akbari, N. (2006). Biochemical characterization of the decaprenyl diphosphate synthase of Rhodobacter sphaeroides for coenzyme Q(10) production. Appl Microbiol Biot, 73, 796–806.
Yen, H., & Shih, T. (2009). Coenzyme Q(10) production by Rhodobacter sphaeroides in stirred tank and in airlift bioreactor. Bioproc Biosyst Eng, 32, 711–716.
Ao, S., Douglas, C., Grundfest, W., Schruben, L., & Wu, X. (2007) Microbial biohydrogen production by Rhodobacter sphaeroides OU001 in photobioreactor. World Congress held at San Francisco on Engineering and Computer Science, pp. 141–145. INT ASSOC ENGINEERS-IAENG.
Inci, E., Altan, T., Ufuk, G., Ela, E., & Meral, Y. (2008). Hydrogen production by Rhodobacter sphaeroides OU001 in a flat plate solar bioreactor. Int J Hydrogen Energ, 33, 531–541.
Wang, Y., Gong, J., & Zhang, Z. (2007) Biodegradation of chlorobenzene by immobilized photosynthetic bacteria Rhodobacter sphaeroides. Advances in Management of Technology, Proceedings, 639–643
Almatawah, Q. A., Cramp, R., & Cowan, D. A. (1999). Characterization of an inducible nitrilase from a thermophilic bacillus. Extremophiles, 3, 283–291.
O’Reilly, C., & Turner, P. D. (2003). The nitrilase family of CN hydrolysing enzymes—A comparative study. Journal of Applied Microbiology, 95, 1161–1174.
Zheng, Y. G., Chen, J., Liu, Z. Q., Wu, M. H., Xing, L. Y., & Shen, Y. C. (2008). Isolation, identification and characterization of Bacillus subtilis ZJB-063, a versatile nitrile-converting bacterium. Applied Microbiology and Biotechnology, 77, 985–993.
Yadav, G., & Devi, K. (2002). Enzymatic synthesis of perlauric acid using Novozym 435. Biochemical Engineering Journal, 10, 93–101.
Wu, H., & Tsai, M. (2004). Kinetics of tributyrin hydrolysis by lipase. Enzyme Microb Tech, 35, 488–493.
Banerjee, A., Kaul, P., & Banerjee, U. (2006). Purification and characterization of an enantioselective arylacetonitrilase from Pseudomonas putida. Archives of Microbiology, 184, 407–418.
Sharma, N. N., Sharma, M. K., Harish, K., & Tek, C. B. (2006). Nocardia globerula NHB-2: Bench scale production of nicotinic acid. Process Biochemistry, 41, 2078–2081.
Almatawah, Q. A., Cramp, R., & Cowan, D. A. (1999). Thermostable nitrilase catalysed production of nicotinic acid from 3-cyanopyridine. Enzyme Microb Tech, 25, 718–724.
Prasad, S., Misra, A., Jangir, V. P., Awasthi, A., Raj, J., & Bhalla, T. C. (2007). A propionitrile-induced nitrilase of Rhodococcus sp NDB 1165 and its application in nicotinic acid synthesis. World J Microb Biot, 23, 345–353.
Acknowledgments
The work is supported by National Basic Research Program (973) of China (no. 2009CB724703).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, C., Wang, X. & Wei, D. A New Nitrilase-Producing Strain Named Rhodobacter sphaeroides LHS-305: Biocatalytic Characterization and Substrate Specificity. Appl Biochem Biotechnol 165, 1556–1567 (2011). https://doi.org/10.1007/s12010-011-9375-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12010-011-9375-z