Abstract
A castor oil-based fatliquoring agent for use in leather coating was prepared via Pickering emulsions stabilized by metal–organic frameworks (MOFs). The partially oxidized ZIF-8 (POZIF-8) nanoparticles were used as MOF in the presence of a castor oil-based dispersant. The results of the stability test showed that the presence of POZIF-8 nanoparticles leads to a stable oil/water emulsion with higher oil content than other nanoparticles, such as TiO2 and ZnO. The stabilized structure of the prepared fatliquoring agent was characterized by transmission electron microscopy (TEM). TEM image indicated that the castor oil either was surrounded or was encapsulated by MOF. The prepared fatliquoring agent was applied to the leather. Then, in order to prove the existence of POZIF-8 nanoparticles in collagen fibers, the cross section of the fatliquored leather was examined by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). These analyses revealed the good dispersion of POZIF-8 nanoparticles from grain to flesh side. The physical and mechanical properties of the fatliquored leather were compared with those of the control leather sample, which was fatliquored by a conventional agent. The results show that the prepared fatliquoring agent significantly improved mechanical properties, lightfastness, softness, and fullness of leather.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Leather processing involves many chemical reactions and mechanical processes.1 In order to get excellent leather, one of the most important processes is the fatliquoring process. In this process, a proper crude oil is introduced into leather tissue to lubricate the collagen fibers.2,3 In addition to lubricating the collagen fibers, fatliquoring agent is generally beneficial for the quality of leather, especially for softness and flexibility.4 The bonding strength between collagen fibers and fatliquoring agent plays an important role in preventing the collagen fibers from migrating outside and also in aging properties of leather.2 Natural animal fats and vegetable oils are the most frequently used raw materials for fatliquoring agents, which are emulsified in water after chemical modifications. These traditional fatliquoring agents, due to reactive sites (double bonds), are susceptible to hydrolysis and oxidation under UV irradiation and, thereby, lead to a degradation of leather.5 Nano-emulsions6 and amphiphilic acrylate copolymers7 are among the alternatives to traditional fatliquoring agents, but they contain a lot of harmful chemicals that have a negative effect on the environment. In fact, the need to protect the environment has imposed restrictions on the use of additional quantities of chemicals.8 Therefore, scientists are interested in designing and developing alternative, sustainable, environmentally friendly materials.9 They attempted to utilize fatliquoring agents with the fewest chemical compositions to reduce negative impacts on the final product properties and the environment.
One of the proposed alternatives is Pickering emulsion that replaced conventional emulsion. In conventional emulsion process, stabilization is done by surfactants and co-surfactants at the oil/water interface, while in Pickering emulsion process, stabilization is done by inorganic nanoparticles, such as nano-TiO2,10,11 ZnO,12 and colloidal silica.13,14 These nanoparticles are located at, or very near, the oil/water interface.15,16 The first time Pickering emulsion was investigated was by Dr. Ramsden in 1903, followed by Pickering in 1907.17,18
In comparison with conventional emulsion, Pickering emulsions have two unique properties: a greater ability to disperse high volume fractions of discontinuous phase and higher stability against coalescence.19 As the unsaturated bond of leather chemicals and collagen strands can be damaged under light and heat circumstances, introducing nanoparticles during the fatliquoring process can enhance the UV resistance of the leather.
According to Pickering emulsion concepts, metal–organic frameworks (MOFs) can also be used as alternatives for stabilizing nanoparticles. MOFs compounds are composed of hydrophilic metal ions or hydrophilic clusters as connectors and hydrophobic organic ligands as linkers. These surface-active materials can emulsify liquid droplets to form Pickering emulsions. They are the newest type of solid porous composite compounds, discovered in 1989 by Robson.20,21 They have successfully found use in many fields ranging from applications such as gas storage, separation, the adsorptive removal of hazardous materials, catalysis, or drug delivery.22,23
Zeolitic imidazolate frameworks (ZIFs) based on transition metals and imidazolate linkers are a subclass of MOFs that are topologically isomorphic with zeolites (3D crystalline, hydrated alkaline, or alkaline-earth aluminosilicates).24,25 ZIFs exhibit interesting properties relevant to low density, high porosity, high surface area, shell permeability, chemical and physical stability, and so on. Recently, ZIF-8 has received great attention due to its potential long-term stability in methanol and water as well as ultraviolet absorption and reflection properties. The hydrophobic pore of ZIFs repels water molecules, hence eliminating the chance of hydrolysis by water. This hydrophobic character is very beneficial in terms of applications to have good adsorption affinities with lipophilic materials.26
Vegetable oils have been widely used in various industries, because of their advantages such as being inexpensive, readily available, and a renewable resource. Among the vegetable oils for the production of fatliquoring agents, castor oil is one of the most important candidates, because of its unique structure. Castor oil is a viscose, pale yellow, nonvolatile, and nondrying oil, and it has 90% ricinoleic acid. This acid has 18 carbon atoms, a hydroxyl group on the 12th carbon, and a double bond between the 9th and 10th carbons. The presence of hydroxyl groups and the carbon–carbon double bonds make it valuable for many chemical reactions and modifications. In addition, its chain is long enough to act as a fatliquoring agent. In the present work, a fatliquoring agent was prepared by a mechanical combination of the partially oxidized ZIF-8 (POZIF-8) and castor oil-in-water media in the presence of anionic carboxylated-castor oil. POZIF-8 nanoparticles are capable of forming an oil-in-water emulsion system. It was applied to the leather and its properties, such as mechanical properties, lightfastness, and softness, were compared with those of the leather coated by a conventional fatliquoring agent. The prepared fatliquoring agent has a lot of castor oil. However, it has high stability and makes less extracted fat and higher mechanical properties in the leather than the control sample.
Experimental
Materials
Castor oil (industrial grade: density @ 20°C = 0.951 gr/cm3, viscosity @ 20°C = 970–1100 cP, iodine value = 86.3 g iodine/100 g oil) was purchased from Shanghai Aladdin Industrial Co., Ltd. (Shanghai, China). Zinc nitrate hexahydrate, 2-methyl imidazolium, silver nitrate, and methanol were all provided from Sigma-Aldrich. Stannic chloride (SnCl4), γ-alumina, and hydrogen peroxide were provided from Shin-Etsu Chemical Co. (Tokyo, Japan).
Preparation of metal–organic framework ZIF-8
ZIF-8 was synthesized using the same procedure described in detail elsewhere.27 In brief, zinc nitrate hexahydrate 5.87 g (0.0197 mol), and 2-methylimidazole 12.98 g (0.158 mol) were separately dissolved in 40 ml of methanol. After that, the ligand solution was added into the metal solution and the mixture was stirred vigorously at room temperature for 120 min, resulting in a milky solution. The reaction product was then centrifuged and was washed several times with ethanol to remove excess reactants. Then, ZIF-8 nanoparticles were dispersed into 60 ml ethanol solution containing 35 mM silver nitrate to be partially oxidized into zinc oxide. Finally, the product was dried in an oven at 60°C for 12 h to obtain the white crystalline product of POZIF-8.
Preparation of castor oil-based dispersant
Castor oil-based dispersant was prepared as previously described.28 In brief, castor oil was first epoxidized using γ-alumina as catalyst and hydrogen peroxide as the oxidant. The ring-opening polymerization of epoxidized castor oil was carried out using stannic chloride (SnCl4) as catalyst at room temperature. Hydrolysis of the product was performed using NaOH solution at 100°C for 12 h under condensing conditions. The average molecular weight of carboxylated-castor oil was obtained at about 2500 g/mol. The carboxylated-castor oil molecules can share the carboxylate anion groups as an anchor in ZIF-8 nanoparticles, thereby establishing and protecting them against hydrolysis.
Preparation of fatliquoring agent
For comparing the efficiency of POZIF-8 with conventional nanoparticles, such as ZnO and TiO2 to form a stable castor oil-in-water emulsion, several Pickering emulsions were prepared under the same experimental conditions. Different amounts of castor oil (10, 30, 50, and 60 g), 5 g carboxylated-castor oil, and 1.5 g nanoparticle (separately, POZIF-8 or nano-TiO2 or nano-ZnO) were mechanically dispersed into distilled water at room temperature and 600 rpm for 2 h. The emulsions were further homogenized by the application of the ultrasonic frequency for 40 min. The Pickering emulsion consisting of 1.5 g POZIF-8 and 50 g castor oil was named POZIF-8-Fat50, and after fatliquoring process of leather was characterized.
Process of leather fatliquoring
To explore the applicability of POZIF-8-Fat50 (consisting of 50 g castor oil) upon leather, fatliquoring was accomplished. Chrome-tanned cow leather was taken for the experiment and cut into 12 cm × 15 cm samples. Sulfated castor oil is considered as conventional fatliquoring for the comparison of the leather properties. The thickness of leather specimens was about 1.2 mm. The leather was fatliquored by either conventional or POZIF-8-Fat50 fatliquoring agent in multisteps. At first, the leather was wetted back in 100 wt% H2O and 1 wt% rewetting agent for 1 h at 25°C, and then washed with 100 wt% H2O. After, the leather was fatliquored with 15 wt% fatliquoring agent and 100 wt% H2O for 1.5 h at 50°C. It should be noted that all weights are based on the weight of the chrome-tanned cow leather. Finally, the leather was air-dried and softened by dry drumming. The finished leather was characterized by the various physical, chemical, and mechanical analyses.
Characterization
The surface morphology and microstructure of POZIF-8 nanoparticles were characterized by (SEM, ZEISS Gemini), and the fatliquored leather was examined by SEM–EDS. The crystallinity of POZIF-8 was evaluated using Philips, model X-pert X-ray diffractometer operating at 40 kV, using Cu as the radiation source. The scans were obtained using a scan step size of 0.03 with a scan step time of 0.25 s. The adsorption isotherm of POZIF-8 nanoparticles was measured at the boiling temperature and saturation pressure of nitrogen; then, the specific surface area was obtained using the Brunauer–Emmett–Teller (BET method, Quantachrome ChemBET 3000). The zeta potential of POZIF-8-Fat50 was measured using Nano ZS ZEN 3600, Malvern particle analyzer. The internal structure of POZIF-8-Fat50 was investigated using (TEM, JEOL 1200EX).
Fat content in fatliquored leather was extracted in a Soxhlet apparatus for approximately 3 h using ethanol as solvent, according to the SLTC Official Method (SLC4, SLTC 1996). The fat extracted percentage from leather is expressed by the following equation:
where Mi and Mf are weights of the leather samples before and after extraction, respectively.
The specimen in dumbbell shape (1 cm × 15 cm) according to ISO 3376 type was strained at a crosshead speed of (100 ± 10) mm/min using Shimadzu Universal Tensile Testing Machine for measuring tensile strength (N/mm2) and elongation at break (%). Tensile strength is maximum load to rupture of the leather cross-sectional area. Elongation is the percentage increase in length of leather under tension. Tear strength (N/mm) measurement, the load required to tear the cross-sectional thickness of the leather, was also carried out according to ISO 3377. The reported results of mechanical properties were an average value of three measurements. The lightfastness of fatliquored leathers was tested according to the standard procedure of ISO 105-B02 and was ranked from 1–5 points with higher points given for better performance. Measurement of leather softness was carried out according to ISO 17235 using the ST300 leather softness tester. The higher value of softness indicates better performance of leather. The fullness parameter, the ratio of the thickness difference of the leather before and after fatliquoring (Ta − Tb) to the thickness of the leather before fatliquoring (Tb), was calculated using the following equation:
The thickness of leather samples was measured using a vernier caliper.
Results and discussion
SEM observation of POZIF-8 nanoparticles
Figure 1 shows the scanning electron microscopy (SEM) image of POZIF-8 nanoparticles. The morphology of crystals is mainly tetragonal, and particle size is about 300 nm. When ZIF-8 is partially oxidized to ZnO, the morphology of crystals changed in comparison with the reported pure ZIF-8 in open literature.29,30 In fact, the shape of cube of ZIF-8 was extended in POZIF-8 nanoparticles, changed from cubic to tetragonal morphology.
XRD Pattern of POZIF-8 nanoparticles
The XRD pattern of POZIF-8 is shown in Fig. 2. It is observed that POZIF-8 is composed of ZIF-8 with characteristic peaks (101), (002), (112), (200), (013), and (222) at the Bragg angles of around 7.38, 10.42, 12.77, 14.75, 16.50, and 18.08, respectively,30,31 and ZnO with characteristic peaks (100), (002) and (101) at about 31.77, 34.42, and 36.25, respectively.32
Sorption isotherms of POZIF-8 nanoparticles
The adsorption isotherms are the relationship between porous structure and sorption type. According to IUPAC classification, there are six representative adsorption isotherms that determine pore type.33 The BET method is a common method for determining surface areas from adsorption isotherms. Figure 3a shows the nitrogen sorption isotherm of POZIF-8, which belongs to type-Ι adsorption isotherm and represents microporous structure. The BET surface area and microporous volume of POZIF-8 were obtained at about 1250 m2/g and 0.7 cm3/g, respectively. Additionally, as shown in Fig. 3b, distribution of pores width is between 7 Ǻ and 14 Ǻ. Pores are classified according to their size, and pores with size (5–20) Ǻ are termed as micropore.33
Visual stability of POZIF-8-Fat50
The prepared emulsions stability of POZIF-8, ZnO, and TiO2 was assessed by visual observing samples as a function of time, and the samples checked for any phase separation. The stability images are presented in Figs. 4 and 5.
As shown in Figs. 4 and 5, the prepared Pickering emulsion with POZIF-8 was more stable than nano-ZnO and nano-TiO2 at all concentrations of oil. Whereas the prepared Pickering emulsions by both nano-TiO2 and nano-ZnO are unstable at a high content of castor oils (60 g), POZIF-8-based Pickering emulsion is stable without any phase separation for more than 2 months. More stability of POZIF-8-Fat, which is the result of electrostatic repulsion of the positive charge of Zn ions, clearly indicates the important role of the POZIF-8 nanoparticles in stabilizing oil-in-water emulsions. Among prepared samples by TiO2 and ZnO, the maximum stability is 90 days, which is equal to the stability of the POZIF-8-Fat50. For this reason, the POZIF-8-Fat50 was selected for further characterization.
Zeta potential of POZIF-8-Fat50
Figure 6 shows the zeta potential of POZIF-8-Fat50. Nanoparticles with a zeta potential range from − 10 mV to + 10 mV are considered approximately neutral, while nanoparticles with zeta potentials of greater than + 30 mV or less than − 30 mV (cationic and anionic, respectively) are considered strongly electrostatically stable.34 The zeta potential value of POZIF-8-Fat50 was obtained at about + 48.1 mV which means the high degree of stability. Furthermore, the positive value of zeta potential indicates that the cationic charge dominated more in the system, probably originating from zinc ions.
TEM observation of POZIF-8-Fat50
The Pickering emulsion was analyzed by transmission electron microscopy (TEM) to explore internal structure of POZIF-8-Fat50. Figure 7 shows that the system is divided into three regions: MOF-rich phase is shown by dark spots, the oil-rich phase is shown by light spots, and the MOF-oil phase is shown by light gray spots; the latter forms the major part of the emulsion.
In the MOF-oil phase, the porosity of MOF is filled with castor oil gust molecules. This has two advantages for the leather. Firstly, oil cannot easily migrate out of the leather. Secondly, in the leather these oils are gradually released into leather fibers as a long-term lubrication, thereby increasing the product’s service life.
EDS spectra of fatliquored leather
In order to prove the existence of POZIF-8 in collagen fibers, the surface and cross section of the fatliquored leather were examined by SEM equipped with the energy-dispersive X-ray spectroscopy (EDS). Figure 8 shows the EDS surface element analysis of the leather area, giving the composition and content of trace elements in the leather sample. The elements of C, N, O, S, and Cr are related before fatliquoring process. The element of Zn detected among the collagen fibers originated from POZIF-8 nanoparticles. The average content of Zn is 0.74 wt%, which confirms the permeation of POZIF-8 nanoparticles into the leather collagen fibers and binding affinity with them.
Figure 9 shows the SEM image of a cross section of the leather sample to investigate the distribution of POZIF-8 from grain to flesh side. Figure 9 illustrates Zn atom is evenly distributed from the grain layer to the flesh layer. POZIF-8 nanoparticles containing castor oil, due to a good affinity with collagen fibers, can easily penetrate deeply into the leather layers and interact with them.
Fatliquored leather properties
The measured properties of the coated leather samples by either POZIF-8-Fat50 or conventional fatliquor are compiled in Table 1. Also, the lightfastness of the leather samples is shown in Fig. 10.
As Table 1 shows, the fat extracted from coated leather by POZIF-8-Fat50 is lower than that of the control leather. Therefore, it can be concluded that a large amount of applied POZIF-8-Fat50 was absorbed by collagen fibers and shows better performance of POZIF-8-Fat50 as fatliquoring agent. The mechanical properties of fatliquored leather samples were compared with each other. All mechanical properties (i.e., tensile, elongation, and tear) of the coated leather by POZIF-8-Fat50 were higher than that of the control leather. Therefore, introduction of surrounded castor oil by MOF as fatliquoring agent into the leather leads to improvement of mechanical properties. A significant increase in elongation at break as compared to the control leather is obtained due to high penetration of castor oil in collagen fibers. More tensile strength and tear strength can be explained by good interaction between POZIF-8 nanoparticles containing castor oil and collagen fibers. In fact, POZIF-8-Fat50 was well separated in the leather. As shown in Table 1 and Fig. 10, the lightfastness property of coated leather by POZIF-8-Fat50 is better than that of conventional fatliquor. The UV optical absorption characteristics of the ZnO clusters existing in POZIF-8 have a significant effect on light performance of fatliquored leather fibers. The ZnO has high optical absorption in both UVA and UVB light and as a result, can reduce the effects of ultraviolet radiation on collagen fibers.35 Zinc ion in POZIF-8 can chemically link with functional groups on the collagen fibers and shield them against UV exposure. The softness of coated leather by POZIF-8-Fat50 was better than that of the control leather. Therefore, the flexibility of the molecule chain of collagen fibers was unexpectedly increased in the presence of MOFs. This is probably due to the high castor oil content included in POZIF-8 nanoparticles, plasticizing collage chains. The fullness of the coated leather sample by POZIF-8-Fat50 was higher than that of the control sample, which shows the penetration and compatibility of the prepared fatliquoring agent with leather fibers.
Conclusions
In this study, a new fatliquoring agent was successfully prepared by emulsifying castor oil in water with help of POZIF-8 and a castor oil-based dispersant. The stability tests show that the prepared Pickering emulsion by POZIF-8 has a higher degree of stability than the prepared Pickering emulsions by nano-TiO2 and nano-ZnO. The results indicate that the introduction of POZIF-8 in fatliquoring agent could improve mechanical properties, lightfastness, softness, and fullness of the fatliquored leather. Therefore, it can also be used as an alternative to conventional fatliquoring agent for leather coatings.
References
Kalyanaraman, CH, Kameswari, KS, Varma, VS, Tagra, S, Rao, J, “Studies on Biodegradation of Vegetable-Based Fatliquor-Containing Wastewater from Tanneries.” Clean Technol. Environ. Policy, 15 (4) 633–642 (2013)
Zhang, Y, Wang, L, “Recent Research Progress on Leather Fatliquoring Agents.” Polym. Plast. Technol. Eng., 48 (3) 285–291 (2009)
Nyamundal, B, Moyo, M, Chigondo, F, “Synthesis of Fatliquor from Waste Bovine Fat for Use in Small Scale Leather Industry.” Indian J. Chem. Technol., 20 116–120 (2013)
Xu, W, Hao, LF, An, QF, Zhou, L, “Minimization of the Environmental Impact of Leather Processing: A Benign and Enzyme-Based Integrated Leather Processing Technology.” Adv. Mater. Res., 113–116 1614–1618 (2010)
Sivakumar, V, Prakash, RP, Rao, PG, Ramabrahmam, BV, Swaminathan, G, “Power Ultrasound in Fatliquor Preparation Based on Vegetable Oil for Leather Application.” J. Clean Prod., 16 (4) 549–553 (2008)
Nashy, HA, Essa, MM, Hussain, AI, “Synthesis and Application of Methyl Methacrylate/Butyl Acrylate Copolymer Nanoemulsions as Efficient Retanning and Lubricating Agents for Chrome-Tanned Leather.” J. Appl. Polym. Sci., 124 (4) 3293–3301 (2012)
Du, J, Shi, L, Peng, B, “Amphiphilic Acrylate Copolymer Fatliquor for Ecological Leather: Influence of Molecular Weight on Performances.” J. Appl. Polym. Sci., 133 (20) 43440 (2016)
Ma, J, Gao, J, Wang, H, Lyu, B, Gao, D, “Dissymmetry Gemini Sulfosuccinate Surfactant from Vegetable Oil: A Kind of Environmentally Fatliquoring Agent in Leather Industry.” Sustain. Chem. Eng., 5 (11) 10693–10701 (2017)
Shaban, SM, Aiad, I, Moustaf, HY, Hamed, A, “Amidoamine Gemini Surfactants Based Dimethylamino Propyl Amine: Preparation, Characterization and Evaluation as Biocide.” J. Mol. Liq., 212 907–914 (2015)
Lyu, B, Wang, H, Ma, JZH, Gao, D, Jin, P, “Preparation and Application of Castor Oil/Nano-TiO2 Composite Fatliquoring Agent via a Pickering Emulsion Method.” J. Clean Prod., 126 711–716 (2016)
Zhai, W, Wu, ZM, Wang, X, Song, P, He, Y, Wang, RM, “Preparation of Epoxy-Acrylate Copolymer@Nano-TiO2 Pickering Emulsion and Its Antibacterial Activity.” Prog. Org. Coat., 87 122–128 (2015)
Ma, J, Duan, L, Lu, J, Lyu, B, Gao, D, Wu, X, “Fabrication of Modified Hydrogenated Castor Oil/GPTMS-ZnO Composites and Effect on UV Resistance of Leather.” Sci. Rep., 7 (1) 3742 (2017)
Bjorkegren, S, Nordstierna, L, Torncrona, A, Palmqvist, A, “Hydrophilic and Hydrophobic Modifications of Colloidal Silica Particles for Pickering Emulsions.” J. Colloid Interface Sci., 487 250–257 (2016)
Luo, X, Li, CH, Duan, Y, Zhang, H, Zhang, D, Zhang, C, Sun, G, Sun, X, “Molecularly Imprinted Polymer Prepared by Pickering Emulsion Polymerization for Removal of Acephate Residues from Contaminated Waters.” J. Appl. Polym. Sci., 133 (15) 43126 (2016)
Yang, Y, Fang, ZH, Chen, X, Zhang, W, Xie, Y, Chen, Y, Liu, ZH, Yuan, W, “An Overview of Pickering Emulsions: Solid-Particle Materials, Classification, Morphology, and Applications.” Front. Pharmacol., 8 287 (2017)
McKenna, TFL, Charleux, B, Bourgeat-Lami, E, D’Agosto, F, Lansalot, M, “Novel Technologies and Chemistries for Waterborne Coatings.” J. Coat. Technol. Res., 11 (2) 131–141 (2014)
Ramsden, W, “Separation of Solids in the Surface-Layers of Solutions and Suspensions (Observations on Surface-Membranes, Bubbles, Emulsions, and Mechanical Coagulation).” Proc. R. Soc. Lond., 72 156–164 (1904)
Pickering, SU, “Emulsions.” J. Chem. Soc. Trans., 91 2001–2021 (1907)
Horozov, TS, Binks, BP, “Particle-Stabilized Emulsions: A Bilayer or a Bridging Monolayer?” Angew. Chem. Int. Ed., 45 (5) 773–776 (2006)
Aghajanzadeh, M, Zamani, M, Molavi, H, Khieri Manjili, H, Danafar, H, Shojaei, A, “Preparation of Metal-Organic Frameworks UiO-66 for Adsorptive Removal of Methotrexate from Aqueous Solution.” J. Inorg. Organomet. Polym., 28 (1) 177–186 (2017)
Hoskins, B, Robson, R, “Infinite Polymeric Frameworks Consisting of Three Dimensionally Linked Rod-Like Segments.” J. Am. Chem. Soc., 111 (15) 5962–5964 (1989)
Dehghani, A, Ranjbar, M, Eliassi, A, “Modifcation of Cu/Zn/Al2O3 Catalyst by Activated Carbon Based Metal-Organic Frameworks as Precursor for Hydrogen Production.” J. Inorg. Organomet. Polym., 28 (3) 585–593 (2018)
Duan, C, Jie, X, Zhu, H, Liu, D, Peng, W, Cao, Y, “Gas-Permeation Performance of Metal Organic Framework/Polyimide Mixed-Matrix Membranes and Additional Explanation from the Particle Size Angle.” J. Appl. Polym. Sci., 135 (10) 45728 (2018)
Mostafa Zamani, R, Rostami, M, Aghajanzadeh, M, Khieri Manjili, H, Rostamizadeh, K, Danafar, H, “Mesoporous Titanium Dioxide at Zinc Oxide-Graphene Oxide Nanocarriers for Colon-Specific Drug Delivery.” J. Mater. Sci., 53 (3) 1634–1645 (2018)
Zhanga, X, Zhanga, Y, Wanga, Y, Gaoa, D, Zhao, H, “Preparation and Corrosion Resistance of Hydrophobic Zeolitic Imidazolate Framework (ZIF-90) Film@Zn-Al Alloy in NaCl Solution.” Prog. Org. Coat., 115 94–99 (2018)
Furukawa, H, Cordova, K, Okeeffe, M, Yaghi, O, “The Chemistry and Applications of Metal-Organic Frameworks.” Science, 341 (6149) 974 (2013)
Jing, Y, Wang, J, Yu, B, Lun, J, Cheng, Y, Xiong, B, Lei, Q, Yang, Y, Chen, L, Zhao, M, “A MOF-Derived ZIF-8@Zn1−xNixO Photocatalyst with Enhanced Photocatalytic Activity.” RSC Adv., 7 (67) 42030–42035 (2017)
Huang, X, Liu, H, Shang, SH, Cai, ZH, Song, J, Song, ZH, “Synthesis and Characterization of Castor Oil-Based Polymeric Surfactants.” Front. Agric. Sci. Eng., 3 (1) 46–54 (2016)
Jian, M, Liu, B, Zhang, G, Liu, R, Zhang, X, “Adsorptive Removal of Arsenic from Aqueous Solution by Zeolitic Imidazolate Framework-8 (ZIF-8) Nanoparticles.” Colloids Surf. A, 465 67–76 (2015)
Schejn, A, Balan, L, Falk, V, Aranda, L, Medjahdi, GH, Schneider, R, “Controlling ZIF-8 Nano- and Microcrystal Formation and Reactivity Through Zinc Salt Variations.” Cryst. Eng. Comm., 16 4493–4500 (2014)
Kaur, H, Mohanta, GC, Gupta, V, Kukkar, D, Tyagi, S, “Synthesis and Characterization of ZIF-8 Nanoparticles for Controlled Release of 6-Mercaptopurine Drug.” J. Drug Deliv. Sci. Technol., 41 106–112 (2017)
Esken, D, Noei, H, Wang, Y, Wiktor, CH, Turner, S, Tendelooc, GV, Fischer, RA, “ZnO@ZIF-8: Stabilization of Quantum Confined ZnO Nanoparticles by a Zinc Methylimidazolate Framework and Their Surface Structural Characterization Probed by CO2 Adsorption.” J. Mater. Chem., 21 5907–5915 (2011)
Kitagawa, S, Kitaura, R, Noro, SH, “Functional Porous Coordination Polymers.” Angew. Chem. Int. Ed., 43 (18) 2334–2375 (2004)
Clogston, JD, Patri, AK, “Characterization of Nanoparticles Intended for Drug Delivery.” In: McNeil, SE (ed.) Zeta Potential Measurement, pp. 63–64. Humana Press, New York (2011)
Nawaz, H, Solangi, B, Zehra, B, Nadeem, U, “Preparation of Nano Zinc Oxide and Its Application in Leather as a Retanning and Antibacterial Agent.” Can. J. Sci. Ind. Res., 2 (4) 164–170 (2011)
Acknowledgments
The authors would like to acknowledge Color and Polymer Research Center of Amirkabir University of Technology and Polymer Iran Chemical & Industrial Group for their support in this research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sardari, A., Sabbagh Alvani, A.A. & Ghaffarian, S.R. Preparation of castor oil-based fatliquoring agent via a Pickering emulsion method for use in leather coating. J Coat Technol Res 16, 1765–1772 (2019). https://doi.org/10.1007/s11998-019-00234-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-019-00234-1