Avoid common mistakes on your manuscript.
Correction to: JMEPEG (2022) 31:2257–2266 https://doi.org/10.1007/s11665-021-06305-y
Acknowledgment of an image source was inadvertently omitted from the caption of Fig. 7. The caption should read as follows:
Microstructures of as-homogenized Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy compressed to the true strain of 0.70: a–d At temperature of 673 K; e–h At temperature of 698 K; i–l At temperature of 723 K; m–p At temperature of 748 K; q–t At temperature of 773 K. Reprinted from Journal of Magnesium and Alloys, Vol 11, Li Hu, Mengwei Lang, Laixin Shi, Mingao Li, Tao Zhou, Chengli Bao, and Mingbo Yang, Study on hot deformation behavior of homogenized Mg8.5Gd 4.5Y 0.8Zn0.4Zr alloy using a combination of strain compensated Arrhenius constitutive model and finite element simulation method, Pages No. 1016–1028, Copyright 2023, with permission from Elsevier
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Chen, Q., Hu, L., Li, M. et al. Correction to: Optimizing Process Parameters of As-Homogenized Mg-Gd-Y-Zn-Zr Alloy in Isothermal Uniaxial Compression on the Basis of Processing Maps via Prasad Criterion and Murty Criterion. J. of Materi Eng and Perform 33, 1081–1082 (2024). https://doi.org/10.1007/s11665-023-08850-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-023-08850-0