Abstract
Water pollution stands as a pressing global environmental concern, elevating the significance of innovative, dependable, and sustainable solutions. This study represents an extensive review of the use of photocatalytic zinc oxide nanoparticles (ZnO NPs) for the removal of emerging pollutants from water and wastewater. The study examines ZnO NPs’ different preparation methods, including physical, chemical, and green synthesis, and emphasizes on advantages, disadvantages, preparation factors, and investigation methods for the structural and morphological properties. ZnO NPs demonstrate remarkable properties as photocatalysts; however, their small dimensions pose an issue, leading to potential post-use environmental losses. A strategy to overcome this challenge is scaling up ZnO NP matrices for enhanced stability and efficiency. The paper introduces novel ZnO NP composites, by incorporating supports like carbon and clay that serve as photocatalysts in the removal of emerging pollutants from water and wastewater. In essence, this research underscores the urgency of finding innovative, efficient, and eco-friendly solutions for the removal of emerging pollutants from wastewater and highlights the high removal efficiencies obtained when using ZnO NPs obtained from green synthesis as a photocatalyst. Future research should be developed on the cost–benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.
Graphical Abstract
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
The significance of water quality underscores the formulation of innovative design concepts for advanced nanomaterials, specifically tailored to address emerging pollutants in water bodies and wastewater treatment facilities (Al Ja’farawy et al. 2022). The aim is the creation of some facile and easily accessible products for rapid response and high sensitivity in pollution removal. The literature review indicates that industrial facilities annually release 300–400 million tons of waste into the world’s water, including organics and inorganics (Fanyun Chen et al. 2020a; Morasae Samadi et al. 2016). Nevertheless, pathogenic bacterial contaminants are also a major global health concern (M. Arunpandian et al. 2019). Due to the hazardous effects that solid and liquid wastes have on humans, animals, and aquatic environments, their disposal is essential (Munawar et al. 2020; Chongyang Liu et al. 2019; Jaspal Singh and Soni 2020).
The concerns related to the pollutants have been addressed by adapting various wastewater treatments, including physical adsorption, biological, and chemical techniques. These methods are difficult and ineffective at removing organic waste or harmful metal ions (Fanyun Chen et al. 2020a; Morasae Samadi et al. 2016). Current research has focused on advanced oxidation process (AOP) technologies that promise effective water purification (M. Samadi et al. 2019). Due to the effectiveness, low cost, and environmentally friendly approach, the use of photocatalysts is one of the AOP methods frequently employed for water treatment (M. A. Ahmed et al. 2019; M Arunpandian et al. 2020). When it comes to innovative physicochemical methods for the photodegradation of organic contaminants, semiconductor photocatalysts have attracted a lot of interest. They have a low energy requirement, are straightforward, and have mild reaction times (M. A. Ahmed et al. 2019; Pant et al. 2013).
Semiconductor metal oxides such as TiO2, ZnO, ZnO, ZnS, chalcogenides (CdS, CdSe), or Fe2O3 exhibit outstanding photocatalytic and antibacterial activity, making them the most promising materials in this field for the removal of organic pollutants and bacterial disinfection (Abebe et al. 2020). The use of nanoscale zero-valent iron (ZVI) in wastewater treatment has drawbacks, and difficulties like the separation of iron ox-hydroxide (FeOOH) nanoparticles in the treated water are caused by the release of soluble iron ions and susceptibility to surface oxidation, which is difficult and expensive to remove from wastewater (Simeonidis et al. 2016). Additionally, ZVI NPs have a tendency to form clusters when subjected to magnetic attraction and are capable of interacting with oxygen and compounds that include oxygen. ZVI NP toxicity to microbial species is another issue that raises questions because it may have an impact on both single cells and large ecosystems. Researchers have investigated a variety of approaches to overcome these difficulties, including strengthening ZVI nanoparticles with solid materials, changing ZVI nanoparticle physicochemical features, and modifying pH-related factors to accelerate the Fenton reaction (Aragaw et al. 2021).
TiO2 and ZnO, two semiconductor metal oxides with comparable band gaps (ZnO, 3.37 eV, and TiO2, 3.2 eV), make good photocatalysts for the purification of water (Pant et al. 2013; Raza et al. 2016). Due to its high excitation binding energy (60 meV), high electron mobility, high quantum efficiency, high photostability, non-toxicity, thermal stability, oxidation resistance, biosafety, and biocompatibility, ZnO is a possible replacement for TiO2 (Swati et al. 2020). Zinc (Zn) is a mineral nutrient that can have a positive impact on human health, whereas titanium (Ti) is a toxic heavy metal. ZnO is considered safe for contact with our skin and is even approved for use on baby skin. In contrast, TiO2 generates more free radicals that can potentially harm the skin. The key difference between these two oxides is that ZnO is a better UV absorber across more wavelengths when compared to TiO2. Numerous studies demonstrate that ZnO can exhibit efficiency comparable to TiO2 in the photocatalytic degradation of certain organic substances, and in some instances, ZnO exhibits even greater photocatalytic activity than TiO2 (G. G. Zheng et al. 2015). For example, Poulios et al. (Poulios et al. 2000) examined the photocatalytic degradation of basic yellow 2 dye, achieving a degradation rate of 95% after 60 min of exposure to UV light with TiO2 P-25 as the catalyst. Conversely, when ZnO was employed, the solution degraded almost completely, reaching nearly 100% degradation within the same 60-min period. The study by Muruganandham and Swaminathan (Muruganandham and Swaminathan 2006), which investigated the photocatalytic degradation of reactive yellow 14 dye in an aqueous solution, also showcased ZnO’s superior efficiency over TiO2. The research established the following reactivity order: ZnO > TiO2-P25 > TiO2 (anatase).
ZnO is an n-type semiconductor, which in the last decade has attracted attention due to the possibility of use in various fields such as optics and electronics, medicine, and the environment (Anbuvannan et al. 2015; Sundrarajan et al. 2015; Jamdagni et al. 2018). Compared to TiO2 or CuO, ZnO in the form of nanoparticles is a cheap, stable, and quickly obtained material (Jayaseelan et al. 2012). The semiconducting properties are given by the large band gap (3.37 eV) which offers superior catalytic, optical, anti-inflammatory, anticancer, antidiabetic, antibacterial, and antifungal properties, but also the possibility of filtering UV, being successfully applied in cosmetics (Mirzaei and Darroudi 2017; Patel et al. 2015).
Various applications derive from the morphology and structure of ZnO NPs prepared by various methods, so that nanoflakes, nanoflowers, nanobelts, nanorods, and nanowires are obtained (Paulkumar et al. 2014; Rajeshkumar et al. 2014). Research has demonstrated that the morphology of nanoparticles has a significant impact on their optical, electrochemical, sensory, thermal, and mechanical characteristics (Velasco et al. 2020). This influence on morphology is referred to as magnetic anisotropy (Fountain and Medd 2015). Additionally, the particle’s shape plays a role in the dispersion, degradation process, stability, and compatibility of ZnO nanoparticles (Garanin and Kachkachi 2003). The synthesis method used influences the morphologies the NPs obtained. Studies have shown that ZnO NPs prepared by the precipitation method can produce spherical and hexagonal morphologies (Velasco et al. 2020; Kolodziejczak-Radzimska and Jesionowski 2014). From hydrothermal synthesis, studies have reported bullet-like (100‒200 nm), rod-like (100‒200 nm), sheet (50‒200 nm), polyhedron (200‒400 nm), and crushed stone–like (50‒200 nm)-shaped ZnO NPs (Ismail et al. 2005; Dem’yanets et al. 2006).
The US Food and Drug Administration has also authorized ZnO as a safe antibacterial agent due to its efficient antibacterial activity, selectivity for bacterial cells, and low toxicity to human cells (Naskar et al. 2020). Many investigations were conducted to overcome some of the drawbacks of using ZnO for wastewater treatment, such as surface and structure modification, noble metal deposition, coupling carbon materials, formation of heterojunctions, and doping with metals and non-metals (Qi et al. 2017; Yadav et al. 2023; Folawewo and Bala 2022). ZnO is non-toxic, is environmentally friendly, and presents good stability properties; thus, it has been used for organic pollutant degradation (Phuruangrat et al. 2019; Tanji et al. 2023). Nevertheless, this approach falls short in enhancing photocatalytic activity, particularly in the visible light spectrum. Carbon materials serve as photoelectron reservoirs, storing and transporting the photogenerated electrons from ZnO to substrates, that is why they have undergone a tremendous increase in coupling to ZnO. The light absorption of ZnO expands into visible light and near infrared due to its photosensitizer characteristics (Qi et al. 2017).
Within these considerations, nanomaterials remain a promising solution especially when single particles are integrated into different selective and reliable matrix avoiding their loss in working environments. We present an extensive scientific investigation covering the period from 2000 to 2023 regarding ZnO nanostructures as reliable catalyst materials for the degradation of emerging pollutants from water sources. Although the literature presents numerous researches on the methods of obtaining ZnO, testing, and improvement solutions through ZnO integration in different matrix, the novelty of this research is to bring together those green methods that offer safety to the environment and aim to degrade emerging pollutants resulted from pharmaceuticals, personal care products, and other anthropic activities. In particular, we emphasized the integration concept of ZnO NPs into matrix as a low-cost tool for rapid degradation of emerging pollutants.
Our objectives for the present research were to (i) identify green syntheses as alternative for classical syntheses for ZnO, (ii) offer a screening analysis on EP types, (iii) analyze the degradation performances on EPs, and (iv) offer future perspectives.
Methodology and results
For the present purpose, we extensively reviewed a large number of research papers as the most suitable methodological tool for conveying the correct data in the field to academic scholars. Thus, a comprehensive literature review ranging from theory to experimental results was analyzed. Besides these, our research included a number of existing guidelines referring to the literature reviews available today (Snyder 2019; Tranfield et al. 2003; Palmatier et al. 2018). Many of these guidelines describe different methodology approaches in order to achieve specific targets. Based on these considerations, the present literature research review was structured into 4 phases: design, conduct, analysis, and structuring and writing the review, as it is presented in Snyder’s paper (Snyder 2019).
The literature review was based on a number of publications between 2000 and 2023, according to the search engine of Web of Science. The primary keywords “green synthesis, ZnO” were chosen, for which a number of 4679 publications were recorded. According to the citations and publication number, it could be observed that in the last 10 years, there has been a continuous interest in the field of green synthesis for ZnO preparation. Thus, from only two or three papers at the beginning of 2000, a number of 725 papers were published in 2022. The number of citations was significant from 2020 where over 10,000 citations were recorded. Figure 1 includes these data from the Web of Science platform. By adding as the keyword “photocatalysis”, the number of papers was reduced to 371, with a constant tendency of the published articles since 2020 and a positive impact of the researches proved by the number of citations, as it can be seen in Fig. 1.
The selected publications, based on mentioned keywords, were collected and organized in accordance with the following criteria:
-
Research design and methods of synthesis
-
Photocatalysis performances for emerging pollutants
-
Characterization investigation for ZnO NPs in order to validate structure and material performances
From the presented publications, an important impact for our research was identified at a number of 342 references that was chosen for EndNote as reference manager, with high impact as scientific information regarding ZnO NPs obtained with green synthesis and high efficiency as photocatalyst. The results of these publications are presented in the next chapters of this paper.
Methods used for ZnO nanostructure preparation and their characterization
Conventional syntheses
Based on conventional methods, ZnO NPs can be synthesized by applying controlled chemical and physical methods, such as sol–gel, sonochemical, solvothermal/hydrothermal, precipitation, microemulsion, and polyol (Verma et al. 2021). Physical methods involve physical processes such as colloidal dispersion, vapor condensation, amorphous crystallization, and physical fragmentation (Agarwal et al. 2017; Vidya et al. 2013; Aladpoosh and Montazer 2015; Chandrasekaran et al. 2016), using equipment to maintain adequate temperature and pressure. Chemical methods are recognized for the accuracy and reproducibility of the results, but they involve chemical agents that are often toxic and have a negative impact on the environment, so the interest in ecological methods is rapidly growing.
There are advantages and disadvantages for any of these methods, some being difficult to scale up, such as spray pyrolysis or low reproducibility for the sol–gel method or with a high consumption of solvents and reagents, as in the case of microemulsion or polyol methods.
Sol–gel synthesis method
The sol–gel method is a wet chemical method, being the most widespread method for the synthesis of photocatalytic semiconductors (Medina-Ramírez et al. 2015; Adeola et al. 2022; Thiagarajan et al. 2017). The final products can be crystalline and non-crystalline nanoparticles, ceramics, aerosols, and xerosols, depending on the final stage of thermal treatment. Precursor soil can be deposited on a substrate by coating or spin (Jamjoum et al. 2021). The method is cheap and allows control of the composition and the final product (Adeola et al. 2022). Through this method, semiconductors such as TiO2 can be doped with boron and nitrogen in order to develop materials with advanced properties applied to water decontamination processes with various pollutants, such as methyl orange (MO) (Gombac et al. 2007). Other examples would be obtaining hybrid nanocomposite magnesium aminoclay (MgAC)-Fe2O3/TiO2 used for the degradation of about 95% methylene blue (MB) and about 80% phenol from water (Bui et al. 2019).
Coupled oxide semiconductors of the p-n heterojunction-type ZnO/GO, Fe2O3/GO, ZnO/CuO, Nb2O5/TiO2, Ta2O5/TiO2, and SnO2/TiO2 were obtained by the sol–gel method, the metal oxide precursors being hydrolyzed under stirring, and the surface area of the metal oxide synthesized coupled leads to increased photocatalytic activity (Medina-Ramírez et al. 2015; Bayode et al. 2021a, b; Gajendiran and Rajendran 2014; Arbuj et al. 2013b, a; Nur et al. 2007).
The sol–gel technique is a versatile but complex method for preparing metal oxide nanoparticles. It involves a series of steps, including sol preparation, hydrolysis, polymerization, gel formation, solvent removal, and heat treatment, which can be time-consuming and intricate. One of the key challenges is achieving precise control over particle size and distribution, as uniformity and prevention of agglomeration can be difficult (Navas et al. 2021). Additionally, maintaining purity and minimizing contamination are crucial, as impurities from reagents or equipment can easily affect the quality of the final nanoparticles. The choice of precursor materials, cracking, shrinkage during drying, and the energy-intensive heating process further add to the complexities (Simon et al. 2009). Safety concerns and the need for specialized equipment and high-purity chemicals can also increase costs. Reproducibility can be a challenge due to the sensitivity of the process to various parameters (Modan and Schiopu 2020; Verma et al. 2021).
Despite these drawbacks, the sol–gel technique is valuable for tailoring metal oxide nanoparticles with unique properties. Researchers are actively working to refine the process and address these challenges to make it more efficient and reliable. Advancements in controlling particle size, minimizing impurities, and optimizing the process parameters are ongoing efforts to improve the utility of the sol–gel technique for nanoparticle synthesis.
Solvo-/hydrothermal synthesis method
The solvo-/hydrothermal method takes place in a closed reaction vessel called an autoclave, where high pressures can be obtained at relatively low temperatures, with the possibility to use different solvents like water, ethanol, or polyols (Yang and Park 2019; Islam et al. 2022). Apart from ensuring elevated product purity and crystalline quality, hydrothermal techniques regulate the ultimate nanostructure dimensions, configuration, and crystal phase within a minimally polluted closed system setting (Cavalu et al. 2018).
Through this method, control of morphology and crystallinity can be obtained for the fine powders. The solvothermal method is the simplest way to produce ZnO NPs, at low pressure and a temperature equal to or higher than the boiling point of the solvent used in the reaction. Depending on the polarities of the solvent, different morphologies can be obtained from nanorods, sheets, and even nanocomposites in which ZnO of about 5 nm is deposited in sheets of graphene (Kunjara Na Ayudhya et al. 2006; Lu et al. 2008; Wu et al. 2011).
The pH of the solution is important in the morphology of ZnO NP nanostructures, especially by the chemical precipitation method. Particle size decreases with increasing pH by dissociating OH ions at high pH (Magesh et al. 2018; Mahajan et al. 2019; Alias et al. 2010). The crystallinity and uniformity of the particles are also obtained by chemical precipitation, in an aqueous or non-aqueous medium, in the presence of a reducing agent, followed by calcination (ChangChun Chen et al. 2008; Ching-Fang Liu et al. 2018). As in the case of the hydro-/solvothermal method, the polarity of the solvent is important, and reproducible nanostructures can be obtained by adding a non-polar (hexane) or weakly polar (acetone) solvent which favors chemical precipitation of high surface area ZnO nanoparticles and reproducible morphological structures, but with a tendency to aggregate, which is why the stabilizing agent is also important (Halaciuga et al. 2011; Dutta et al. 2012). Low pH values lead to the dissociation of Zn2+ ions, in hydrothermal synthesis, the pH being almost neutral to alkaline to favor the hydrolysis of the Zn precursor in the presence of hydroxyl ions (Ching-Fang Liu et al. 2018). In the case of hydrothermal synthesis, the pH variation from 7 to 13 has an effect on the crystal growth rate and surface energy, obtaining various morphologies such as nanorods with hexagonal ends, spheroidal disc and hexagonal, porous hexagonal nanorods, and porous hexagonal nanorods assembled into nanoflower structures (Kumaresan et al. 2017).
The hydrothermal method uses high pressure and temperature, in the presence of which heterogeneous reactions take place in the presence of solvents (Adeola et al. 2022; Medina-Ramírez et al. 2015). TiO2 nanorods can be obtained (Muduli et al. 2011; Gao et al. 2015), CuO (Outokesh et al. 2011; Prathap et al. 2012), ZnO (Bin Liu and Zeng 2003; Gerbreders et al. 2020), MnO2 (Subramanian et al. 2005; Chu et al. 2017), etc. It is also possible to obtain hybrid composites used in degradation processes, such as TiO2 doped with boron and nitrogen for the degradation of bisphenol A (BPA) and TiO2-Bi2WO6 composite was developed for Rhodamine blue degradation (Abdelraheem et al. 2019; Hou et al. 2014).
Innovative photocatalysts composed of PVDF/ZnO/CuS were developed using electrospinning, hydrothermal treatment, and ion exchange techniques with the purpose to address the issue of particle aggregation in an aqueous environment (Zang et al. 2022). These photocatalysts demonstrated excellent stability during recycling and reuse. ZnO nanorods were firmly attached to PVDF nanofibers, serving as a support structure. Additionally, CuS NPs were introduced as photosensitizers to enhance the visible light photocatalytic efficiency and compensate for the relatively low quantum efficiency of ZnO. The results demonstrated superior photocatalytic performance in the degradation of MB under both UV and visible light, with kinetic constants of 9.01 × 10−3 min−1 for UV irradiation and 6.53 × 10−3 min−1 for visible light. Before the hydrothermal treatment, the morphology of PVDF nanofibers appeared relatively smooth, with each nanofiber having a diameter of approximately 300 nm (Fig. 2a). However, the diameter distribution was somewhat uneven. After the hydrothermal process, a multitude of neatly arranged ZnO nanowhiskers enveloped the nanofibers (Fig. 2b), significantly increasing their specific surface area. Subsequently, in situ reduction techniques uniformly distributed CuS nanoparticles on the ZnO nanorods (Fig. 2c). Transmission electron microscopy (TEM) images revealed crystal spacings of 0.282 nm and 0.305 nm, corresponding to the (100) crystal plane of ZnO (wurtzite-type) and the (102) crystal plane of CuS (Fig. 2d, e). The interface between ZnO and CuS, marked with a red line, confirmed the successful construction of the p-n heterojunctions (Fig. 2f).
As the process is considered environmentally advantageous, it is incorporated into eco-friendly approaches for synthesizing ZnO NPs. Nevertheless, this approach comes with certain drawbacks. For instance, it necessitates the use of a highly costly autoclave and imposes restrictions on research due to the inability to keep the reactor open. Other disadvantages are represented by the toxicity of some solvents that are used in this process; the reactions can take place in long periods of time (5–48 h) (Verma et al. 2021).
Co-precipitation synthesis method
The co-precipitation method generates metallic NPs through concurrent nucleation, subsequent growth, and eventual agglomeration of very small nuclei. The solution’s pH is modified within a designated range, usually falling between 7 and 11, to trigger the precipitation of zinc ions (Naser et al. 2023). Subsequently, the resulting blend is either stirred or subjected to sonication for a specified duration to encourage the development of ZnO NPs. One of the merits associated with the co-precipitation technique is its straightforwardness and cost-effectiveness. This technique offers various advantages, such as simplicity of application, reduced reliance on high temperatures, and straightforward energy control (Rane et al. 2018). Additionally, this method can yield a substantial quantity of ZnO nanoparticles with high efficiency. However, it is important to note that this approach has a notable disadvantage: it results in nanoparticles with a significant presence of attached water molecules. Furthermore, it exhibits drawbacks such as batch-to-batch repeatability challenges, a broad spectrum of particle sizes, and pronounced agglomeration tendencies (Mostafavi et al. 2015). The necessary materials are easily obtainable, and the synthesis procedure is comparatively uncomplicated (Marciello et al. 2016).
The precipitation reagent influences the nucleation speed, morphology, and crystallinity of the formed ZnO particles. Crystallinity decreases with increasing rate of precipitating agent volume (e.g., NaOH), and decreasing precipitating agent volume per minute leads to the change of morphology from ZnO NPs to nanorods (Bekkari et al. 2017). Different co-precipitation methods were employed to synthesize ZnO NPs with different particle sizes. One method utilized zinc acetate solution in methanol, resulting in spherical ZnO NPs ranging from 2 to 10 nm in size. Another approach involved zinc acetate dihydrate, hydrochloric acid, and ammonia as reactants, yielding pseudo-spherical ZnO NPs with an average size of 11 to 20 nm (Purwaningsih et al. 2016). Additionally, a similar co-precipitation technique was employed by Adam et al. to produce ZnO NPs with an average diameter of 140 nm (Adam et al. 2018).
High degradation efficiencies under visible radiation were obtained for the ZnO:Au photocatalyst when it was used for the degradation of chloroquine phosphate (CLQ), paracetamol (PAR), diclofenac sodium (DCF), and ciprofloxacin (CIP) pharmaceuticals in water (F. Y. Zheng et al. 2023) and W/Ag/ZnO nanocomposite created for degradation of Turquoise Blue Dye (TBD) (Noreen et al. 2022).
Sonochemical synthesis method
The sonochemical method is based on a physical phenomenon of acoustic cavitation, through which nanometals, oxides, semiconductors, metal alloys, etc. are obtained (Medina-Ramírez et al. 2015; Hangxun Xu et al. 2013). The method is advantageous economically and for the environment, and the shape and size of the materials can be controlled (Abbas et al. 2014; Ali Dheyab et al. 2021). A major drawback of this method is that it has low efficiencies (Modan and Schiopu 2020).
The literature indicates the obtaining of CdO nanorods which in the presence of Ag can lead to the formation of Cd(OH)2 with Ag nanodots deposited on the surface (Abbas et al. 2014). ZnO NPs were also obtained by the sonochemical method with zinc acetate precursor and a solvent that acts as the base and stabilizer and template for ZnO NPs (Bhatte et al. 2012; Nandi and Das 2020). The literature also indicates that ultrasonic waves play a crucial role in facilitating the conversion of Zn(OH)2 into single-phase ZnO NPs.
Through sonochemical synthesis, the crystallinity and size of ZnO NPs depend on the ultrasonic wave intensity, sonication time, and solvent type (Hangxun Xu et al. 2013; Banerjee et al. 2012; Alammar and Mudring 2011; Zak et al. 2013). In this way, 0-D, 1-D, 2-D ZnO nanostructures, nanoflowers, and 3-D nanoflakes can be obtained (Ghosh et al. 2014; Verma et al. 2021). The pH variation with the sonochemical method led to spherical shapes at pH 9.5, and by increasing to about 11, the shapes became ellipsoidal and respectively rod or sheet at pH 12.5 (Xiao et al. 2008).
A successful synthesis was achieved through a sonication process, resulting in a heterostructure photocatalyst comprising ZnO NPs decorated with boron nitride quantum dots (ZnO/BNQDx) (D. Liu et al. 2022). The ZnO/BNQDx (x = 1, 2, 4, and 6 wt.%) nanocomposites showed an enhanced photocatalytic activity in the degradation of methylene blue (MB) and methyl orange (MO), attributed to the formation of a heterojunction, which facilitates effective hole extraction by BNQDx while simultaneously preventing the recombination of photoinduced charge carriers. The optical characteristics of both ZnO and ZnO/BNQDx nanocomposites were explored using UV–visible diffuse reflectance spectroscopy and photoluminescence (PL) analysis, as displayed in Fig. 3a and b. ZnO exhibits distinct UV absorption extending up to around 360 nm, corresponding to a 3.25 eV band gap. The ZnO/BNQD samples exhibit a visible range absorption with increasing absorption intensity as the BNQD quantity rises. Consequently, the band gap decreased gradually to 3.25 eV (ZnO/BNQD-1), 3.24 eV (ZnO/BNQD-2), 3.23 eV (ZnO/BNQD-4), and 3.21 eV (ZnO/BNQD-6), indicating that the interaction between ZnO and BNQDs enhanced visible light absorption, thus improving the photocatalyst’s activity in visible light (Fig. 3a). The PL analysis suggests improved separation of photoinduced electron–hole pairs due to the formation of a heterojunction between ZnO and BNQDx (Fig. 3b).
Microemulsion synthesis method
In a microemulsion environment, water droplets collided, triggering a precipitation reaction that resulted in the formation of NPs stabilized by surfactants (Islam et al. 2022). This approach is favored for its simplicity, thermodynamic stability, and low residue. However, microemulsion techniques have drawbacks such as sensitivity to temperature and pH, as well as the continuous need for high surfactant concentrations, which can be irritating (Rane et al. 2018). Wang et al. produced ZnO NPs in a microchannel reactor with an average diameter of 16 nm, followed by drying and calcination (Y. Wang et al. 2014). Similarly, Li et al. generated ZnO NPs through a straightforward microemulsion process, yielding NPs with various shapes, including columnar and spherical morphologies (X. C. Li et al. 2009).
The synthesis of ZnO NPs by microemulsion offers a control of purity and crystallinity by using organic solvents immiscible with the aqueous solution of the metal solution, in the presence of anionic and cationic surfactants (Verma et al. 2021; Sarkar et al. 2011; Atul B Lavand and Malghe 2015a). Nanostructures such as spheres, needles, and rods can be obtained, as it can be observed in Fig. 4. The use of organic solvents possessing multiple hydroxyl groups was recently implemented through the polyol method, through which nanorods can be obtained under controllable conditions, using zinc acetate precursor in diethylene glycol at temperature, in the presence of capping agents such as polyvinylpyrrolidone or p-toluene sulfonic acid (Alves et al. 2018; Anžlovar et al. 2012; Flores-Carrasco et al. 2019; Lee et al. 2008; Mei Wang et al. 2018).
Microwave-assisted synthesis method
The microwave-assisted method is a popular choice for synthesizing nanomaterials due to its numerous advantages compared to other traditional methods and is commonly used for producing ZnO NPs (Wojnarowicz et al. 2020). In this technique, microwave radiation is employed to trigger the reaction between zinc acetate or zinc nitrate and a base like sodium hydroxide or ammonium hydroxide in a suitable solvent such as water or ethanol (Kolodziejczak-Radzimska and Jesionowski 2014; Prommalikit et al. 2019). The process is conducted under controlled microwave conditions, including temperature and power. This method stands out for its rapid and efficient production of ZnO nanoparticles, with the ability to complete the synthesis within minutes to hours. Moreover, it offers the advantage of tailoring nanoparticle size and morphology by adjusting reaction parameters.
The rapid synthesis of thin films of ZnO NPs, advantageous to avoid the risk of uncontrolled release of NPs, can be achieved by pyrolysis by spraying the metal precursor in aerosol form on a hot solid substrate, using a carrier gas at high pressure (D Sumanth Kumar et al. 2018a). Homogeneous spheres of ZnO NPs of about 20–30 nm can be obtained (Turner et al. 2010; Tani et al. 2002). Microwave radiation ensures fast and uniform heating of the solution compared to classical heat treatment (Bilecka and Niederberger 2010). The irradiation power of the furnace on the solution of metal precursors ensures different morphologies of ZnO NPs obtained from nanoflower shapes to 1D nanoneedles, and the higher the reaction speed, the faster the growth of ZnO nuclei occurs (Barreto et al. 2013).
The rapid microwave synthesis method proved effective in producing zinc oxide nanorods (ZnO NRs) capable of absorbing visible light photons (Cardoza-Contreras et al. 2019). Introducing silver (Ag) and gallium (Ga) into the ZnO nanorods had distinct impacts on their optical properties. At low concentrations, Ga enhanced the defect band of ZnO NRs, whereas higher concentrations increased the intensity of the near band edge (NBE) emission. In the experiment conducted to degrade methylene blue (MB), it was observed that a 0.1% Ga doping significantly improved the photocatalytic performance of ZnO NRs. This improvement in photocatalytic efficiency suggests that the low-level Ga doping creates more surface defects, which effectively trap photogenerated electrons and holes, reducing their recombination. On the other hand, low-level silver doping increased the intensity of both the NBE emission and defect band, possibly indicating an increase in lattice defects. These defects can act as recombination centers, resulting in a slight reduction in photocatalytic activity.
ZnO nanostructures were integrated with reduced graphene oxide (ZnO-rGO) through a one-pot microwave-assisted hydrothermal synthesis as a promising approach for polychlorinated biphenyl (PCB) degradation (Merlano et al. 2022). As a result, the composites displayed enhanced photocatalytic efficiency for PCB degradation in contrast to ZnO NPs. Achieving complete PCB mineralization is seldom documented, necessitating prolonged irradiation durations. High removal rates (> 90%) and under scalable experimental conditions were reported.
The SEM and TEM analyses (Fig. 5) were conducted to examine the morphologies of the synthesized materials. ZnO NPs were successfully generated, exhibiting an approximate spherical shape with an average particle size of 108 nm (Fig. 5a). In the case of the nanocomposites, distinct ZnO nanostructures in the form of rods and flowers were achieved, completely covering the rGO sheets (Fig. 5b, c). The rod-shaped ZnO nanoparticles that adhered to the rGO flakes had an average length of 2.60 µm and an average diameter of 511 nm. TEM micrographs clearly show the anchoring of a ZnO rod within the rGO sheets (Fig. 5d, e). Figure 5f provides evidence of an estimated d-spacing value of 0.20 nm between two adjacent lattice planes, corresponding to the (101) planes of hexagonal wurtzite ZnO which can be observed.
High-energy ball milling synthesis method
The high-energy ball milling (HEBM) synthesis method for ZnO nanoparticles offers advantages such as controlled size and enhanced properties but is accompanied by notable drawbacks (Hodaei et al. 2015). It involves specialized, potentially costly equipment and high energy consumption, and the use of milling balls can introduce contamination (Piras et al. 2019). The process can be time-consuming, result in a broad size distribution, generate heat, cause mechanical damage, and pose challenges for scale-up. However, researchers still value HEBM for its ability to tailor nanoparticle properties, especially when precise control is crucial for specific applications, weighing its advantages against these disadvantages based on project requirements.
Researchers have utilized this technique to synthesize ZnO NPs using commercially available ZnO powder with an initial mean particle size of 0.8 nm (Prommalikit et al. 2019). Varying milling durations resulted in ZnO NPs with final sizes ranging from 20 to 400 nm, with longer milling times leading to smaller particle sizes. For instance, spherical ZnO NPs with an approximate size of 30 nm were obtained after a specific milling duration.
Photocatalysis is a green process of advanced oxidation that takes place on the basis of light that decomposes organic contaminants in the presence of nanostructured oxide materials and immobilizes microbial agents in water (Bora et al. 2017).
Laser ablation synthesis methods
A typical laser ablation method can be employed for the removal of metallic ions from metal surfaces by using a laser beam and a small volume of liquid (methanol, ethanol, or purified water) in which the surface is immersed (Mintcheva et al. 2018). This approach offers the advantages of simplicity and environmental safety, making it an efficient and straightforward process. However, when organic substances are present, the pyrolysis byproducts resulting from laser ablation have not been fully elucidated and require further investigation. Noteworthy findings include those by Al-Dahash et al., who successfully employed laser ablation in a NaOH aqueous solution to produce spherical ZnO NPs ranging from 80.76 to 102.54 nm (Al-Dahash et al. 2018). Laser ablation offers advantages such as high precision, minimal heat-affected zones, and the ability to work with a wide range of materials. However, it also requires careful control of laser parameters to achieve desired results and avoid collateral damage to surrounding materials.
Green syntheses
The green approach regarding the synthesis of ZnO NPs appeared as a result of the toxic substances used in the synthesis and the high energy consumption. Green synthesis or biosynthesis, as an alternative in obtaining NPs, involves the use of plant metabolites, microorganisms, and algae. Obtaining ZnO NPs, as an inorganic semiconductor, leads to the formation of amphoteric particles, insoluble in water (Hussein and Mohammed 2021).
There is numerous specialized literature that indicates various approaches regarding green processes, which can lead to the biosynthesis of nanoparticles through the use of plants and microorganisms (such as bacteria, fungi, algae) as an environmentally friendly, cost-effective, safe, byproduct-free, ecological solution (Agarwal et al. 2017; Salam et al. 2014). Those nanomaterials resulting from green synthesis using plants, microorganisms, algae, or other bioregenerable materials are considered “biogenic” (Jagpreet Singh et al. 2018; Prasad et al. 2021).
Green methods represent solutions for replacing hydrocarbon capping agents functionalized with heteroatoms, polymers (polyvinyl pyrrolidone, polyvinyl alcohol, etc.), dendrimers, and block copolymers with extracts from plants, fungi, yeasts, bacteria, and algae (Prasad et al. 2021; Duan et al. 2015; Prakash et al. 2010; Dauthal and Mukhopadhyay 2016; Dahoumane et al. 2017; Jha and Prasad 2008; Mukherjee et al. 2001). Thus, the replacement agents are polysaccharides (starch, chitosan, glucose, etc.), enzymes, polyphenols, vitamins, and biomolecules. The starch used in obtaining ZnO NPs, with the role of stabilizer, binds the metal ions from the precursor solution through the hydroxyl groups. The long polysaccharide chains reduce the mobility of metal ions and lead to an ordering of the structure, dimensions, and morphology of the synthesized nanoparticles (Mukherjee et al. 2001).
Plant extract synthesis method
Natural reagents have the role of reducers for nanoparticle precursors (usually salts), but they can also be stabilizing or coating agents. From certain parts of plants, from roots and fruits to seeds, reducing extracts and stabilizer properties for ZnO-type nanoparticles can be obtained, such as: Trifolium pratense flowers, Aloe vera leaves, or Rosa canina fruits (Zong et al. 2014; Ramesh et al. 2015). Green synthesis using plant extracts such as leaves, stems, roots, fruits, or seeds involves a fast synthesis time and leads to the production of a pure, stable material that can have various shapes and sizes (Agarwal et al. 2017; Jiao Qu et al. 2011b). The reduction of metal ions or oxides, using plant extracts, leads to the obtaining of 0 valence metal NPs, the reducing agent being polysaccharides, polyphenols, vitamins, amino acids, alkaloids, or terpenoids secreted by the plant (Jiao Qu et al. 2011b; Heinlaan et al. 2008).
The extract is prepared by boiling and stirring ground powder obtained from plant parts with demineralized water. After filtration, the resulting clarified solution serves as an extract that functions as a reducer for metal precursors (Heinlaan et al. 2008). In the case of ZnO NP preparation, hydrated zinc nitrate, zinc oxide, or zinc sulfate precursors can be mixed with the plant extract at the effective temperature and time (Ochieng et al. 2015; Jiao Qu et al. 2011a). The effectiveness of the extraction is greatly influenced by the temperature. In general, higher temperatures increase yields by increasing the rate of phytochemical diffusion and their solubility in the solvent. By lowering viscosity and surface tension, this also facilitates the penetration of the solvent into the plant matrix (Farahmandfar et al. 2019; Khan et al. 2019). However, the ideal temperature varies with respect to the plant, solvent, and targeted phytocompounds, and exceeding it can lead to the degradation of thermolabile biomolecules and an increase in solvent evaporation, which decreases efficiency. For instance, the amount of polyphenolic chemicals produced by Orthosiphon stamineus leaf extract peaked at 40 °C with 80% methanol and began to decline at 60 °C as a result of degradation (Akowuah and Zhari 2010). Similar to this, yields were decreased when anthocyanins were extracted from berries using ethanol or sulfured water above 45 °C (Cacace and Mazza 2003). In order to maximize the extraction of phytochemicals from various plant sources, proper temperature management is essential. The extraction yield can be affected by a number of factors, in addition to temperature, including stirring rate, extraction time, the solvent types and their ratio of mixing, particle size, and, of course, the method of extraction used. All of these factors must be considered during the extraction process (Sulaiman et al. 2017; Weldegebrieal 2020). Physical characteristics including particle size and shape (Stan et al. 2015), oxygen vacancy content (J. P. Wang et al. 2012b), and surface defects (edges and corners) can all have an impact on how effective ZnO NPs are as photocatalysts, as can the type of plant extract utilized and the synthesis procedure in general.
An example of a source of polyphenols is grape extract (Vitis vinifera), a source rich in phytochemicals, which also contains flavonoids and catechins, all with a reducing role for metal salts, but also other compounds of the nitro or ketone type (Pati et al. 2014; Khosravi-Darani et al. 2019; Upadhyay et al. 2015; Georgiev et al. 2014). ZnO NPs can be obtained from different zinc precursors (zinc chloride dihydrate, zinc sulfate heptahydrate ZnSO4 · 7H2O, etc.) solution and grape extract in the presence of NaOH to maintain the pH of the mixture at a value of 8, the white color indicating the formation of ZnO NPs (Fig. 6) (Constandache et al. 2023; Hussein and Mohammed 2021).
ZnO NPs are formed based on the reduction of the metal from the initial compound (e.g., salt) to zero valence, after which Zn oxide is formed by calcination. In the case of polyphenols from plant extracts, they produce complexation with Zn2+; by hydrolysis, Zn(OH)2 is formed, and by calcination, ZnO (Fig. 7). The formation mechanisms are not fully elucidated; they are still being studied (Basnet et al. 2018; Alamdari et al. 2020; Barzinjy et al. 2020).
One of the advantages of green synthesis is the integration of ZnO NP synthesis processes into the concept of sustainability and waste minimization (Barzinjy et al. 2020). Physicochemical methods are still applied due to the short synthesis time, although the equipment is energy consuming, and the reagents include acids and bases, surfactants, and solvents with toxic, corrosive, and irritating potential. It also results in hazardous waste and toxic gases (Barzinjy et al. 2020). The ecological methods of synthesis also involve the reuse of some vegetable waste, a potential source of phytochemical substances in the processes of obtaining ZnO NPs.
The literature indicates the use of Carica papaya extracts and the one obtained from Vitex negundo leaves on the basis of which possible stages were developed in the mechanism of obtaining ZnO NPs: complexation, aggregation of NPs, and oxidation of phytocomponents (SC Sharma 2016; Ambika and Sundrarajan 2015).
Other types of plant extracts through which the presence of polyols, phenolic acids, flavonoids, sugars, tannins, and acids leads to the obtaining of stable and controlled ZnO NPs are those obtained from the leaf of Swertia chirayita, fruits of Rosa canina, bark of Boswellia stem, mimosifolia flower, Camellia sinensis tea leaves, Plectranthus amboinicus leaves, etc. (Prasad et al. 2021; Akhter et al. 2018; Jafarirad et al. 2016; Supraja et al. 2016; Vijayakumar et al. 2015; Senthilkumar and Sivakumar 2014; Deepali Sharma et al. 2016).
The citrus extract, especially lemon, led to the obtaining of ZnO NPs, using dry and crushed leaves dissolved in deionized water, the obtained filtrate being brought into contact with a precursor solution of Zn(NO3)2·6H2O, in the presence of a solution of NaOH. After maintaining the temperature for 3 h and drying the precipitate, ZnO NPs of approx. 15–25 nm were obtained (Karanpal Singh et al. 2023).
Today, green synthesis is integrated into laboratory synthesis methods in which nanocomposites can be obtained from natural precursors. Thus, the extract from crushed leaves of Ageratum houstonianum was brought into contact with Zn(NO3)2·6H2O solution, the precipitate formed being dried in an oven at 60 °C and calcined at 700 °C for obtaining crystalline ZnO NPs. In order to make the dye degradation process more efficient by irradiation with natural sunlight, NPs were anchored in multilayer graphene obtained from corn husk, thus obtaining nanocomposites with a crystallite size of about 40 nm (Sebuso et al. 2022).
Recently, significant interest in template-assisted environmentally friendly synthetic methods has been shown, which are cost-effective and safe by avoiding the use of organic solvents, surfactants, and hazardous chemicals. Thus, ZnO nanostructures synthesized with the assistance of xanthan gum (XG) were created using three different green protocols: sonochemical, mechanochemical, and hydrothermal methods (Kaur et al. 2023). These ZnO nanostructures were denoted as ZnO-TS, ZnO-TH, and ZnO-TM, respectively. Similarly, ZnO was synthesized without the use of XG as a template through sonochemical, hydrothermal, and mechanochemical methods, and these resultant ZnO samples were labeled as ZnO-S, ZnO-H, and ZnO-M, respectively. The template-assisted ZnO nanostructures were assessed for their potential as photocatalysts in the degradation of emerging pollutants, specifically triclosan (TCS) and imidacloprid (IMD), under UV light exposure and revealed high photocatalytic performance. It was reported that the photocatalytic efficiency of the catalyst was significantly influenced by several factors, including crystallite size, surface area, and the band gap energy of the catalyst. Due to its smaller crystallite size, larger surface area, and lower band gap energy, the ZnO-TS photocatalyst outperformed both the ZnO-TH and ZnO-TM catalysts in terms of catalytic efficiency, particularly under UV light.
The analysis conducted through field emission scanning electron microscopy (FESEM) demonstrated that the synthesis methods had a substantial influence on the morphology of ZnO, resulting in various nanostructures depending on the chosen method (Fig. 8). Specifically, the template-free sonochemical synthesis approach (ZnO-S sample) yielded rod-like ZnO structures, while the template-assisted sonochemical synthesis (ZnO-TS) produced elongated needle-shaped particles. In the case of hydrothermal synthesis, both template-assisted (ZnO-TH) and template-free (ZnO-H) methods produced distinct morphologies: highly crystalline hexagonal and worm-like shapes, respectively (Kaur et al. 2023).
A different research paper documented the utilization of fresh olive (Olea europaea) fruit extract in the synthesis of zinc oxide NPs (ZnO@OFE NPs) (Ghaffar et al. 2023). These nanoparticles exhibited a spherical nanostructure with a diameter of 57 nm and were produced through an eco-friendly one-pot method. Waste from O. europaea fruit played a dual role as a reducing agent and capping agent in this process. The effectiveness of the newly synthesized catalysts was assessed by observing the degradation of methylene blue (MB) and methyl orange (MO) dyes when exposed to sunlight. To conduct a comprehensive analysis of their photocatalytic activity, a catalyst dose of 30 mg in 30 mL of solution was determined to provide optimal absorptions of 75% for MB and 87% for MO within 180 min, with photodegradation rate constants of 0.008 and 0.013 min−1, respectively. Additionally, the ZnO@OFE NPs displayed impressive antioxidant properties, combating DPPH, hydroxyl, peroxide, and superoxide radicals. In contrast, when sunlight was absent, the removal efficiency via adsorption onto the ZnO@OFE NPs’ surface was only 12% for MB dye and 10% for MO dye after 180 min.
Bimetallic ZnO–CuO hetero-nanocomposite, ZnO, and CuO nanostructures were synthesized utilizing a hydrothermal synthetic procedure, employing leaf extract from Aegle marmelos, also known as bael (Basavegowda et al. 2022). The ZnO–CuO hetero-nanocomposite and ZnO NPs were found to be spherical, with an average size of approximately 9.2 nm and 7.8 nm, respectively. The high stability of the ZnO–CuO hetero-nanocomposite, ZnO, and CuO NPs in an aqueous medium was confirmed by ζ-potential measurements, which were recorded as − 28.2, − 33.2, and − 29.6 mV, respectively. Benefiting from the formation of p-n heterostructures, the bimetallic ZnO–CuO hetero-nanocomposite exhibited excellent photocatalytic activity against 4-nitroaniline (4-NA) and MO compared to pure ZnO and CuO. The photocatalytic performance results showed a significant improvement for the bimetallic ZnO–CuO hetero-nanocomposite in degrading 4-NA (90% removal in 20 min, with a rate constant, k, of 3.9 × 10–2 min−1) and MO (96% removal in 10 min, with a k of 41.15 × 10–2 min−1). These outcomes were twofold compared to the performance of pure ZnO and CuO NPs.
Bacteria synthesis method
Green synthesis of ZnO NPs can also be achieved using bacteria, although this requires the screening for microbes and a careful monitoring of the culture broth, resulting in additional costs and extended processing times. Some bacterial strains have the capacity to reduce metal ions leading to the synthesis of oxide nanoparticles: Lactobacillus casei, prokaryotic bacteria, actinomycetes, Escherichia coli, etc. Yeasts can be successfully applied in green synthesis to obtain nanoparticles of silver, gold, zinc, and/or titanium (Iravani 2014; Thakkar et al. 2010). Intracellular enzymes present in microorganisms have the role of reducing metal ions until the formation of NPs. Green synthesis brings together two areas of interest for the progress of society, materials science and environmental protection, through which nanomaterials gain a sustainable path according to their life cycle.
Utilizing bacteria to create nanoparticles comes with various challenges, such as the considerable time and effort needed to identify suitable microorganisms, the requirement for continuous monitoring throughout the culture and synthesis process, and concerns related to controlling the shape and size of the nanoparticles. Additionally, the expense associated with the growth media for bacteria can act as a limiting factor. Nevertheless, an environmentally friendly approach was demonstrated by utilizing Bacillus licheniformis to produce ZnO nanoflowers. These nanoflowers showcased an improved level of photocatalytic activity and degradation capabilities when compared to existing photocatalytic materials. This enhancement is attributed to the higher concentration of oxygen vacancies within the synthesized nanoparticles. These distinct photocatalytic characteristics suggest that these nanoflowers hold potential for applications in bioremediation processes, as they generate active species through the absorption of light. The nanoflowers produced using this method had dimensions of approximately 40 nm in width and 400 nm in length (Raliya and Tarafdar 2013).
A study by Tripathi et al. leveraged the unique capabilities of Rhodococcus and Aeromonas hydrophila to synthesize ZnO NPs of different sizes and shapes (Tripathi et al. 2014). The study also highlighted the role of rhamnolipid in stabilizing these NPs, showcasing their potential for various applications in nanotechnology and materials science. Rhodococcus, known for its resilience in adverse conditions and its ability to metabolize hydrophobic substances, plays a crucial role in biodegradation (Reddy et al. 2012). In this study, Rhodococcus pyridinivorans and zinc sulfate were utilized to produce spherical NPs with a size range of 100–130 nm, as confirmed by XRD and FESEM analysis. FTIR examination identified various chemical groups present in the NPs. Additionally, ZnO NPs were synthesized using Aeromonas hydrophila as a substrate, resulting in NPs with a size range of 42–64 nm, featuring diverse shapes such as oval and spherical (Mehta et al. 2009). Rhamnolipid, due to its ability to prevent micelle aggregation on carboxymethyl cellulose, contributed to the stability of these ZnO NPs, acting as an effective capping agent (Kundu et al. 2014). Further characterization through TEM, XRD, and DLS revealed the synthesis of spherical NPs with a nanosize range of 27–81 nm.
Micro- and macroalgae synthesis method
Unicellular algae (like chlorella) and multicellular algae (such as chlorophyll) serve as examples of photosynthetic organisms, notably including brown algae. Unlike conventional plants, algae lack typical plant structures like leaves and roots. Marine algae are categorized based on their pigments, with Rhodophyta, Phaeophyta, and chlorophytes characterized by red, brown, and green pigments, respectively. Algae have been extensively utilized for producing gold (Au) and silver (Ag) nanoparticles, but their application in synthesizing zinc oxide (ZnO) nanoparticles has been limited and is documented in relatively few studies (Thema et al. 2015).
Significant attention has been directed towards the potential of microalgae to detoxify hazardous metals and convert them into less harmful forms. To synthesize ZnO NPs, researchers have employed both Sargassum muticum and Sargassum myriocystum, which are both part of the Sargassaceae plant family (Sanaeimehr et al. 2018; Azizi et al. 2014). The analysis using XRD and FESEM revealed the presence of sulfated polysaccharides in the investigated NPs, indicating similar nanoparticle sizes (42 nm, 30–57 nm, respectively) and a hexagonal wurtzite structure. In the case of Sargassum myriocystum, DLS and AFM measurements showed varying size ranges (46.6 nm, 20–36 nm, respectively), along with the identification of carbonyl and hydroxyl stretching in nanoparticles that exhibited substantial structural diversity. From some microalgae, ZnO NPs of about 36 nm can be obtained, whose stability has been demonstrated through structural investigations even after 6 months (Agarwal et al. 2017).
An eco-friendly, biologically mediated method for producing ZnO nanoflowers at low temperatures has been investigated in a recent study (Rao and Gautam 2016). This “green” strategy has a number of benefits, including the use of environmentally benign reactants and financial viability. These nanoflowers were developed by the researchers from the cell-free extract of the freshwater microalga Chlamydomonas reinhardtii and were composed of individual nanorods assembling into flower-like shapes. The 330-nm-long nanorods created porous nanosheets that were 55–80 nm thick. The size of larger porous nanoflowers was about 4 µm. The ZnO nanoflowers’ hexagonal wurtzite crystal structure was confirmed by XRD analysis, and algal biomolecules may have contributed to their formation and stabilization, according to FTIR spectroscopy. The effects of dye concentration and catalyst dose revealed that these nanoflowers demonstrated improved photocatalytic activity against methyl orange (MO) under natural sunshine. This technology offers a cutting-edge, environmentally benign way to make zinc oxide nanoflowers with potential uses in water purification and dye deterioration.
Fungus synthesis method
An affordable and cost-effective alternative is the use of fungi in the production of ZnO NPs, as they exhibit tolerance and bioaccumulation of metals compared to bacteria (Pati et al. 2014). Extracellular NPs from fungus are advantageous due to their high production, simple downstream processing, and commercial viability (Azizi et al. 2014).
ZnO NPs were made using Aspergillus fumigatus mycelia. The DLS study found that the area sizes of NPs ranged from 1.2 to 6.8, with a 3.8 average size. With a considerable particle size of more than 100 nm, AFM determined that the average height of NPs for a period of 90 days was 8.56 nm. The generated NPs were stable for 90 days because they eventually formed an agglomeration with an average particle size of 100 nm (Jaidev and Narasimha 2010). The NPs made from Aspergillus terreus, a member of the Trichocomaceae family, were subjected to SEM analyses and the size range was between 54.8 and 82.6 nm. The Debye–Scherrer equation was used to calculate the average size of the material found in the XRD analysis, which was 29 nm. In the created NPs, FTIR measurements revealed the synthesis of primary alcohol, aromatic nitro compounds, and amine. Analysis using SEM, TEM, and XRD confirmed that NPs made with Candida albicans had a similar size range of 15–25 nm (Shamsuzzaman et al. 2017). ZnO NPs produced by Aspergillus species were typically spherical.
Another study presented the synthesis of ZnO NPs by using a fungal extract from Xylaria acuta and the obtained nanopowder was characterized by means of UV spectroscopy, FT-IR, PXRD, SEM with EDX, and TEM to determine the structure, morphology, and chemical composition (Sumanth et al. 2020). The SEM analyses showed that the structures of the NPs were cylindrical rods and hexagonal shapes with an average diameter of 40–55 nm. To determine the elemental composition and existence of the ZnO NPs, an EDX scan was performed. Zinc and oxygen showed prominent signals in the EDX spectrum, which verified the existence of ZnO NPs produced by fungi and the fact that zinc exists as an oxide as opposed to its pure form (Shankar and Rhim 2019).
Aspergillus niger can effectively manufacture ZnO NPs on a wide scale, as shown by a study’s characterization using XRD, UV–Vis, FTIR, and SEM (Kalpana et al. 2018). The functional groups present in the NPs were investigated with FTIR analysis. The effective synthesis of ZnO NPs is demonstrated by distinct and powerful diffraction peaks in the XRD examination. SEM has verified that these NPs are spherical and range in size from 84 to 91 nm. The research also shows that cotton fabric treated with these nano-ZnO NPs has antibacterial qualities. Furthermore, a decrease in absorbance, indicating complete mineralization and color loss, showed that the synthesized NPs were successful in degrading Bismarck brown dye.
Recent contributions regarding emerging pollutant (EP) degradation towards photocatalysis
Impact of the EPs on the environment
EPs are a new class of substances that at low concentrations are identified as presenting ecological and human health risks (Guanqun Feng et al. 2021; Noguera-Oviedo and Aga 2016). EPs comprise few subgroups of organics: pharmaceutical and personal care products (PPCP), microplastics (MP), engineered nanomaterials (ENM), pharmaceutically active compounds (PhAC), endocrine-disrupting chemicals (EDC), artificial sweeteners (ASW), disinfection byproducts (DBP), antibiotic resistance genes (ARG), detergents, pesticides, and other organic compounds that are mainly generated by human activities (Noguera-Oviedo and Aga 2016; Qiaowen Tan et al. 2019a; Zhang et al. 2020; Pruden et al. 2006). A comprehensive illustration of the most common categories of emerging pollutants presented in water is shown in Fig. 9.
Konstantinou and Albanis observed that textile dyes and other industrial dye compounds form a substantial group of organic substances posing an increasing environmental risk (Konstantinou and Albanis 2004). The discharge of colored wastewater into the environment causes eutrophication and non-esthetic pollution, and it may produce harmful byproducts due to chemical reactions occurring within the effluent. These dyes can also be toxic, which heightens ecological concerns about their presence in the environment. They can also make it harder for light to penetrate contaminated waterways (Akpan and Hameed 2009). Traditional wastewater treatment methods have proven ineffective in treating synthetic textile dye wastewater due to the dyes’ chemical stability, with some dyes passing through untreated. Furthermore, textile dyes are resistant to conventional methods of degradation. To address this issue, recent research has focused on photocatalysis as a promising approach for completely breaking down these pollutants in wastewater (Saquib et al. 2008; Weldegebrieal 2020; Moradi et al. 2015).
Pharmaceuticals and personal care products constitute a unique category of substances, often categorized as emerging environmental pollutants due to their inherent ability to induce various physiological responses in humans. Many research inquiries have validated the presence of PPCPs in various environmental settings, raising concerns about potential significant consequences for both biodiversity and human well-being. Pharmaceuticals refer to medicinal substances, including over-the-counter and prescription drugs, used for treating and preventing illnesses in both humans and animals. On the other hand, personal care products are primarily designed to enhance our daily lives’ quality (Osuoha et al. 2023).
PPCPs represent a substantial category of emerging pollutants. Over the last 10 years, significant apprehension has arisen due to the inadvertent presence of PPCPs in various components of the marine environment, including biota, sediments, and water, at concentrations with the potential to trigger adverse consequences for the immediate ecosystem. When administered in small amounts, most PPCPs exhibit a remarkable ability to induce physiological abnormalities, classifying them as potent substances capable of disrupting biological processes in a variety of organisms. Although certain PPCPs may undergo degradation in the environment, their persistent consumption and inadvertent introduction into ecosystems classify them as “pseudo-persistent” compounds within the environment. The main sources and transportation modes of PPCPs in the environment are presented in Fig. 10.
Many inquiries have been conducted concerning the prevalence, ecological harm, and methods of breaking down PPCPs in wastewater for their elimination. Although the research community has shown growing interest in PPCPs, there is still a significant gap when it comes to understanding their ecological impact. This gap is primarily due to the limited number of substances being studied across various environmental matrices. Some researchers have examined the concentrations of certain PPCPs, which are classified as priority chemicals in aquatic ecosystems (N. Liu et al. 2020; Junaid et al. 2019; Paucar et al. 2019; Yi Chen et al. 2016).
In a research conducted by Madikizela et al. in 2020 (Madikizela et al. 2020), it was documented that there was a presence of 19.2 μg L−1 of ibuprofen detected in surface water. Conversely, Matongo et al. (Matongo et al. 2015) observed a concentration of the same pharmaceutical and personal care product (PPCP) at 1.38 μg L−1 in wastewater. The dieldrin concentration was recorded at 1.51 μg L−1 in surface water, according to Okoya et al. (Okoya et al. 2013). Additionally, the levels of acetaminophen and amoxicillin in surface water and seawater ranged from 0.0058 to 1.23 μg L−1, as reported by Folarin et al. in 2020 (Folarin et al. 2019). Moreover, in a study conducted by Olatunde et al. in 2014, oxytetracycline was found to have concentrations ranging from 0.003 to 0.0048 μg L−1 in surface water (James et al. 2014). Similarly, Amdany et al. (2014) reported that naproxen, ibuprofen, and triclosan exhibited concentrations in wastewater ranging from 10.7 to 127.7 μg L−1. In wastewater, naproxen, ibuprofen, and triclosan were found to have concentrations ranging from 10.7 to 127.7 μg L−1 (Amdany et al. 2014). Nevertheless, the influence of sediment on the concentration and behavior of PPCPs in aquatic systems remains uncertain.
The concentrations of EPs are related to habits patterns, water consumption, sewer conditions, environmental fate, etc. (Parida et al. 2021). Even if the concentrations are between nanograms per liter and micrograms per liter, the risks regarding long-term exposure and environmental persistence could affect life and ecosystem’s health and sustainability, especially when inadequate treatment is applied (Taoufik et al. 2020; Parida et al. 2021; Lutterbeck et al. 2020; Yi Chen et al. 2016). Today, some international regulations stated the status of these EPs and developed lists with compounds classes, characteristics, and exposure information (Recast 2010; Post 2021; Organization and WHO., 2004).
Different treatment combinations are used today because the conventional treatment processes are ineffective for effectively removing EPs. Examples include biological treatment methods combined with AOP (e.g., membrane bioreactor-ozonation, constructed wetlands-UV irradiation) and membrane separation processes combined with biological treatments (e.g., membrane bioreactor-reverse osmosis, sequential biological reactor-nanofiltration) (Parida et al. 2021). The main constraints are given by the high costs and sustainability of processes. Thus, research is focusing on the development of new materials with cost-effective environmental efficiencies.
There are various benefits of using AOP for wastewater treatment. First off, because of the high oxidation potential of the ∙OH molecule (Kokkinos et al. 2021), AOPs are renowned for their quick reaction speeds. When compared to traditional treatment procedures, this speedy response results in shorter retention times, which improves the effectiveness of wastewater treatment. Second, AOP systems have a compact footprint that requires little space on the ground to process the required flow rate.
The limited introduction of new dangerous compounds into the water is a key advantage as well. ∙OH molecules can unite to form water, lowering the possibility of dangerous consequences, as opposed to chlorine disinfection, which might result in toxic byproducts. AOPs can also mineralize organic molecules, transforming them into stable inorganic substances including salts, water, and carbon dioxide. These methods are adaptable and able to remove a variety of organic materials as well as get rid of some heavy metals (Saviano et al. 2023). AOPs can successfully eliminate pathogens as a disinfection step when used in conjunction with UV disinfection, in particular. AOPs also do not concentrate trash for subsequent treatment, unlike chemical or biological processes, and do not produce sludge, which lowers the concentration of pollutants in the effluent (Deng and Zhao 2015).
ZnO NPs exhibit strong antibacterial properties, making them a promising candidate for various antimicrobial applications. The effectiveness of ZnO NPs against bacterial strains like Bacillus subtilis and Escherichia coli is attributed to their nanoscale size, which enhances their interactions with bacteria (Karanpal Singh et al. 2023). When reduced to the nanometer range, ZnO NPs can efficiently target bacterial surfaces and even penetrate inside the bacterial cells, leading to distinct bactericidal mechanisms (Seil and Webster 2012). These interactions are generally toxic to bacteria, making ZnO NPs valuable in antimicrobial applications, such as in the food industry and wastewater treatment. Moreover, their biocompatibility and thermal stability further enhance their potential as antibacterial agents (Karanpal Singh et al. 2023). Overall, the literature suggests that ZnO NPs possess a strong antimicrobial capability that can be harnessed for various biotechnological and environmental purposes.
One of the processes that lead to the removal of EPs, especially for antibiotics, is adsorption, which can be physisorption or chemisorption, and based on kinetic models and spectroscopic analyses, the correct mechanisms can be identified. The chemistry of the solution (pH, pKa, and pHpzc) is essential in establishing the interactions between adsorbate and adsorbent at different pH values (Ajala et al. 2022). The pH has an essential role in the photocatalytic degradation, its values influencing the surface charge of the catalyst, the method of binding the pollutants to the catalyst surface, and their dissociation (Adeola et al. 2022).
According to the literature, PPCP include any product used resulting from medical applications and care products, which appears in water and represents a health risk. The sources of release in the aquatic environment are multiple, and their appearance in water purification and treatment plants has started to represent a concern in the last 30 years (Schumock et al. 2014; Leung et al. 2012; Jin-Lin Liu and Wong 2013; Kosma et al. 2010; Oliveira et al. 2015; Ling Feng et al. 2013). The problem regarding their persistence is given by the concentrations and stability of the initial structures, in water they can be transformed and immobilized.
The stability of EPs to oxidation treatments and their toxicity make their biological degradation impossible and thus, their presence in the environment is a major risk. An example is acetaminophen (ACE), which ends up in water through urine, after consumption (Tobajas et al. 2017). High concentrations can lead to liver diseases, especially through decomposition products (Roberts and Thomas 2006; Buxton and Kolpin 2005; Ternes 1998). Another example is antipyrine (ANT) which can cause liver damage in case of uncontrolled occurrence in aquatic environments, this being detected in a proportion of 68.5% after treatment with activated sludge (Deblonde et al. 2011).
The photocatalysis process follows specific kinetic models as indicated in the literature, which serves as the basis for establishing the degradation mechanism. Adeola et al. indicate the first-order Langmuir–Hinshelwood model for the ZnO-CuxO photocatalyst (Adeola et al. 2022). The mechanism is due to superoxide as the main generator of reactive species, and holes (h+) lead to the formation of reactive oxygen species (ROS), such as hydroxyl radicals (OH∙) and superoxide radicals (O2∙−). These ROS are highly reactive and can attack and degrade the pollutants, further enhancing the photocatalytic activity of ZnO. The degradation process that was based on this mechanism was successfully applied in the degradation of dyes and is presented in Fig. 11.
Photodegradation performances of ZnO nanostructures applied for EP degradation
An efficient photocatalyst must provide good charge separation and efficient light absorption, especially in the visible region. Thus, semiconductors alone require a high intensity of light, induce charge carriers, and thus lead to limitations of their applicability. Doping with elements or obtaining a composite photocatalyst can provide solutions to these challenges (Shoaib Ahmed et al. 2021; Taoufik et al. 2020; Parida et al. 2021). It is necessary to obtain materials with a narrow band gap, low charge recombination rate, visible light irradiation, reusability, and stability. A few examples of the photodegradation efficiency (PE %) of some recently used photocatalysts based on ZnO NPs for emerging pollutant degradation are presented in Table 1.
The studies presented in Table 1 show the recent interest in using ZnO-based nanomaterials to degrade some of the most common emerging pollutants found in wastewater, like tetracycline (Patehkhor et al. 2021) (Xiao Chen et al. 2020b), BPA (Peng Xu et al. 2021) (Bilgin Simsek et al. 2018), MB (Lin et al. 2018), and metformin (Khavar et al. 2019). The studies present different methods used to enhance the ZnO NP photocatalytic performances by developing composites with other metal oxides and determining the optimal degradation conditions for the emergent pollutants studied.
Due to their large band gap energy (Eg > 3 eV), rapid recombination, and low charge-transfer rates of photoinduced electron–hole pairs, TiO2 and ZnO catalysts are partially limited (Jiang et al. 2014). It has been possible to create a wide range of hybrid catalysts to improve ZnO’s photoactivity and antiphotocorrosion. Studies showed that by using matched band energies, heterojunction between semiconductors can effectively separate photoinduced charge carriers and increase solar light absorption in the visible region (Ningning Wang et al. 2016). A study reported that rGO-based TiO2-ZnO nanostructures (rGO/TiO2/ZnO) were synthesized using a hydrothermal method and characterized through SEM, XRD, and XPS analyses that confirmed the formation of wurtzite ZnO and anatase TiO2 in the tandem nanostructure (Bilgin Simsek et al. 2018). The UV–Vis spectrum indicated that this hybrid catalyst possesses the lowest band gap energy (Eg = 2.5 eV). Photocatalytic degradation of bisphenol A, ibuprofen, and flurbiprofen was examined under UV and visible light irradiation. ZnO, TiO2, TiO2/ZnO, and rGO/TiO2 composites were prepared for comparison, with the rGO/TiO2/ZnO catalyst demonstrating superior photocatalytic performance under visible light irradiation. The enhanced degradation efficiency of the TiO2/ZnO structure by rGO is attributed to graphene’s electron properties, its role as a supportive substrate providing a two-dimensional structure, and the reduction of the band gap energy.
The successful chemical precipitation process was employed to synthesize spherical ZnO NPs of varying sizes using different solvents, namely, water (referred to as ZnOw) and ethanol (referred to as ZnOe) (Choina et al. 2015). In ethanol, the nanoparticles exhibited sizes ranging from 10 to 30 nm, while in the aqueous solution, they measured approximately 100 nm. During the photocatalytic decomposition experiments of two model drugs, tetracycline (TC) and ibuprofen (IBP), at two different photocatalyst concentrations (10 mg/L and 0.5 mg/L), distinct adsorption behavior was observed due to variations in specific surface areas and substrate concentrations. Notably, the adsorption of TC and IBP onto ZnOe and under low irradiation power was found to be greater than that onto ZnOw, particularly at lower photocatalyst-to-substrate mass ratios, which became apparent even below 10 ppm. Increasing the pH level from 7 to 9 resulted in a boost in the photocatalytic degradation of TC, from approximately 65 to 90% when using ZnOe and from around 50 to 85% when using ZnOw.
CdO-ZnO nanocomposites were synthesized using a simple solution method for degradation of RhB dye (Umar et al. 2022). The characterization of morphological, structural, phase, vibrational, optical, and compositional properties of CdO-ZnO nanocomposites denoted the aggregates ranging from 250 to 500 nm in size formed after annealing at 500 °C and hexagonal wurtzite and cubic phases in ZnO and CdO, respectively, with a crystal size of 28.06 nm (Fig. 12a). The stretching vibration of the Zn–O and Cd–O bonds was evident from the prominent wide peak at 511 cm−1 (Fig. 12b). At room temperature, the primary absorption peak for the nanocomposites was observed at approximately 403 nm (Fig. 12c). The nanocomposites had a band gap energy of 2.55 eV (Fig. 12d), which was considerably smaller compared to pure ZnO nanostructures but higher than that of CdO nanomaterials (2.2–2.5 eV).
Novel nano-heterostructures consisting of gC3N4, NiO, ZnO, and Fe3O4 were synthesized using a hydrothermal method at 110 °C for 18 h (Raha and Ahmaruzzaman 2020). These structures demonstrated remarkable photocatalytic activity, achieving the degradation of esomeprazole, an emerging organic water pollutant and model drug, to a level of 95.05% ± 1.72% under visible light irradiation within 70 min. The investigated reaction mechanism also indicated a pseudo-first-order kinetics due to the coupling of ∙O2 and ∙OH between NiO and ZnO which has a broad band and gC3N4 which has a narrow band gap. To characterize the morphology, size, and crystallography of the gC3N4/NiO/ZnO/Fe3O4 nano-heterostructures, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED) were performed. The TEM images (Fig. 13a and b) revealed dispersed nanoparticles of ZnO, NiO, and Fe3O4 distributed across the gC3N4 sheet. The HRTEM image (Fig. 13c) allowed for the measurement of interplanar spacings and differentiation of lattice fringes, facilitating the identification of ZnO, NiO, and Fe3O4 NPs. The average particle size was determined to be 17.06 nm. The SAED pattern (Fig. 13d) displayed concentric rings, indicating the polycrystalline nature of the nanohybrid structure. Within the SAED pattern, distinct planes of ZnO ((0 0 2), (1 1 0)), NiO ((2 0 0), (2 2 2)), Fe3O4 ((0 2 3), (1 2 2)), and gC3N4 ((0 0 2)) were identified and marked.
Many studies have reported the use of precious metals like silver (Ag), gold (Au), and palladium (Pd) (Vaya and Surolia 2020) to improve band gap energy in ZnO nanocomposites for the degradation of various pharmaceutical products. Ag has become more significant among these metals due to its great solar light absorption and ability to suppress electron–hole recombination through surface Plasmon resonance (Kaur et al. 2018). The hydrothermal method can be used to obtain Ag2O/ZnO/rGO heterojunction photocatalysts used for the photocatalytic degradation of some BPA pollutants under simulated sunlight. Doping with Ag led to the lowering of the band gap of ZnO, which led to about 80% removal efficiency of BPA using 5% Ag and 3% GO by weight. The reuse of Ag2O/ZnO/rGO is possible, the material showing good photostability and pH adaptability (Peng Xu et al. 2021). It was reported that despite having a small band gap energy (2.73 eV), the silver iodide (AgI) photosensitive semiconductor significantly increases photodegradation activity in composite PGCN/AgI/ZnO/CQDs due to strong contacts that promote photon transport and prevent rapid electron–hole pair recombination (Hasija et al. 2019).
ZnO/NiFe2O4 nanocomposites were synthesized through the hydrothermal method, with varying mole ratios of Zn2+ to NiFe2O4 (1:0.05 and 1:0.1), denoted as CNi0.05 and CNi0.1 (Stiadi et al. 2023). These nanocomposites were tested for their ability to degrade Rhodamine B and methylene blue (MB) under natural sunlight. In both nanocomposites, the primary diffraction peaks were observed at 2θ values of 31.7°, 34.4°, and 36.2°, corresponding to the miller indices of (100), (002), and (101), which are indicative of the presence of ZnO NPs within the composites (Fig. 14). Additionally, both ZnO/NiFe2O4 nanocomposites exhibited specific NiFe2O4 peaks at 2θ = 35.7° with a 311 miller index, denoted by an asterisk (*), confirming the presence of this phase in the composite materials. The absence of any other XRD peaks, aside from those of ZnO and NiFe2O4, demonstrated the successful formation of single-phase ZnO/NiFe2O4 nanocomposites using this synthesis method.
In the absence of a catalyst, the degradation of Rhodamine B only reached 10%, while the degradation of MB reached 30% after 3 h. Notably, the CNi0.05 nanocomposite showed the highest degradation percentages for both dyes, when the degradation percentage reached 98% for Rhodamine B and 97% for MB at using the CNi0.05 composite as the catalyst. Without exposure to light, the degradation percentage of the CNi0.05 composite remained low at 6–8% after 3 h. These findings provide clear evidence that the degradation of dyes by CNi0.05 occurred through photocatalysis, as the irradiation process substantially enhanced the degradation percentages.
In another study Khavar et al. (2019), a novel nanostructured catalyst Fe3O4@rGO@ZnO/Ag NPs (FGZAg) is synthesized by using graphene oxide and ZnO-coated Fe3O4 microspheres doped with Ag NPs, and its efficiency in metabolizing metformin (MTF) is examined both in the ultraviolet and visible spectra of light. The resulting samples were analyzed using a variety of analytical techniques, which revealed onion-shaped spheres with a hexagonal wurtzite crystal structure and a mesoporous texture, as well as Ag NPs that were securely stuck to the catalyst’s surface. When degrading MTF under visible light, FGZAg showed significantly improved photocatalytic activity when compared to pure ZnO, completing total degradation and 60% mineralization of 20 mg/L MTF in just 60 min.
A nanomaterial made of ZnO and maghemite was used in a study by Semeraro et al. to speed up the photodegradation of tetracycline in aqueous solutions when subjected to sunlight. Iron oxide nanoparticles significantly altered the morphology of ZnO while keeping both iron oxide (γ-Fe2O3) and ZnO (wurtzite form) in their crystalline phases (Semeraro et al. 2020). The efficient removal of the photocatalyst from water using a weak external magnetic field was made possible by the paramagnetic properties of γ-Fe2O3 nanoparticles. This resulted in a significant reduction in separation time and suggested the use of the ZnO/γ-Fe2O3 nanocomposite for large-scale, continuous water treatment processes. Additionally, compared to bare ZnO, γ-Fe2O3 improved the nanostructures’ porosity and adsorption qualities, which is essential because adsorption is the first stage of photodegradation. The presence of γ-Fe2O3 enhanced catalytic activity by around 20% while having no negative effects on ZnO-mediated photodegradation. In conclusion, the ZnO/γ-Fe2O3 nanocomposite showed outstanding recyclability thanks to the paramagnetic qualities of γ-Fe2O3 and the ability to breakdown over 88% of water-dissolved tetracycline.
In order to successfully remove the difficult antibiotic ciprofloxacin (CIP) from wastewater, a microwave-prepared porous ZnO/SnS2 photocatalyst was used in visible light photocatalytic degradation (Makama et al. 2020). The research looked into the effects of radical scavengers on the degradation process as well as a number of process factors, including pH, catalyst dose, and initial CIP concentration. The findings showed that a pH of 6.1 and a catalyst dose of 500 mg/L were the ideal conditions for CIP degradation, while an excessive catalyst dosage hindered the reaction rate due to light scattering and decreased light penetration. In a different investigation, solvothermal preparation of Zn-doped Cu2O particles produced improved specific surface areas, increased visible light absorption, and a larger band gap than pure Cu2O (Yu et al. 2019). R2-Cu2O demonstrated the best photocatalytic performance and reusability, achieving a remarkable 94.6% degradation of ciprofloxacin. Even after five cycles, the degradation percentage remained above 91%.
To enhance even more the stability and photodegradation properties of ZnO NPs, studies have reported the preparation of novel matrices with eco-friendly supports like clays and carbon-based materials that are further discussed in detail in the next chapter.
New reliable photocatalytic matrix based on ZnO nanostructures
The efficiency of a photocatalyst is given by its stability and the possibility of rapid recovery. Thus, the integration of ZnO NPs, which offer increased reactivity and catalytic potential due to their reduced dimensions, can also lead to significant losses in the analyzed systems. To address this issue, the creation of appropriate matrices has been studied in recent times. Below, we present the most efficient variants of using certain supports for ZnO NPs in the degradation process of EPs. In order to improve the growth surface of ZnO nanostructures on the support materials, carbon-based substrates can be used: activated carbon (AC), graphene oxide (GO), carbon nitride (C3N4), and graphene (Le et al. 2022). Another type of support is clay, which was used for the in situ assembly of ZnO nanoparticles to obtain nanoarchitectures. Obtaining them consisted in the incorporation of the metal precursor of Zn acetylacetonate in suspensions different from clays, the product obtained being calcined (Akkari et al. 2016). Table 2 describes the performances of such ZnO catalyst with different supports.
ZnO NPs—carbon-based supports
This section discusses the utilization of ZnO composites with carbon-based supports for the removal of different emerging pollutants from wastewater. In order to demonstrate the efficiency of photocatalytic degradation, laboratory tests are performed by varying some working parameters, starting from the time interval, the pH value, catalyst quantities, pollutant concentrations, etc. (Pushkal Sharma et al. 2020). For example, Sharma et al. indicated in the case of the reduced graphene oxide (rGO)-ZnO composite different contents of graphene, time, variable pH between 5 and 9, and different intensities of the UV lamp, in order to study the photocatalytic effect on the degradation of 20 mg/dm3 of ofloxacin (Pushkal Sharma et al. 2020). The efficiency was demonstrated by the degradation of about 99% of this pollutant, after about 6 h using 0.5% rGO-ZnO composite. Regarding the reuse process of the nanophotocatalyst, it was recovered by centrifugation, keeping the degradation efficiency after the first cycle from 99 to 96.4% and reaching an efficiency of about 83.3% after 6 cycles.
Photocatalytic composites with ZnO have the advantage of increasing the degradation efficiency of emerging pollutants. For example, in the case of BPA, photocatalytic tests using 5%-Ag2O/ZnO lead to about 87% degradation, after 180 min. The addition of 3% by weight of rGO led to the increase of the specific surface area and leads to an efficiency of about 80% in terms of BPA degradation, and the recombination rate is lower for the photoinduced electron–hole pairs of 5%-Ag2O/ZnO/rGO-3% (Peng Xu et al. 2021).
Mesoporous zinc oxide can be deposited on a reduced graphene support (rGO@ZnO), with efficiency in the photocatalytic mineralization of ofloxacin from aqueous solution. The literature indicates the obtaining of nanophotocatalysts in situ with different contents of GO (0.2%, 0.5%, 1%, and 2%) using zinc nitrate, with pH control of about 9, in the presence of ammonia liquid at 110 °C for 7 h (Pushkal Sharma et al. 2020).
Graphene oxide (GO)/ZnO composite was used to degrade atenolol, a beta-blocker used to regulate blood pressure, by artificial irradiation, achieving a degradation efficiency of 85% at a catalyst dosage of 1.2 g/L, pH 4 after 60 min (Bhatia et al. 2021). They also observed that GO-ZnO outperformed GO-TiO2 due to a faster reaction rate, highlighting its superior photocatalytic performance.
ZnO/CdO/rGO was obtained by the hydrothermal method in order to test for the photocatalytic degradation of BPA, ThB, and CIP under UV light illumination (Sonu Kumar et al. 2022). The ZnO-CdO incorporated with reduced graphene oxide (ZCG)-5 nanocomposite can lead to the degradation and mineralization of BPA by 98.5%, thymol blue (ThB) by 98.38%, and CIP by 99.28% after UV light irradiation. ZCG-5, through its good photocatalytic activity, leads to the generation of more ROS species, especially as a result of the incorporation of rGO nanosheets with ZnO-CdO in the photocatalyst (Sonu Kumar et al. 2022).
The graphite powder was pre-oxidized using P2O5 and concentrated sulfuric acid, and the product obtained, after drying, was further oxidized in the presence of NaNO3, H2SO4, and KMnO4. After the complete reaction, hydrogen peroxide was added to finalize the process in order to obtain graphene oxide (GO). The synthesis of the ZnO/CdO/rGO and ZnO/CdO composites took place in an autoclave by using specific metal precursors of the type Zn(N03)2·6H20 and respectively Cd(N03)2·4H20, in the presence of GO, in a basic environment (Shouli Bai et al. 2020).
Hu et al. obtained ZnO NPs by the assisted wet chemical method, using zinc acetate in NaOH medium, which were further loaded into biochar by sonication (Hu et al. 2019). A carbon/ZnO heterojunction is formed that leads to high degradation efficiency for dyes, the advantages being the stability of these materials, the large pore volume, and the high adsorption capacity (Srikanth et al. 2017). These materials can be obtained by hydrothermal, sonochemical, precipitation, electrochemical, and immersion coating methods (Le et al. 2022).
ZnO can be doped with N doped with carbon sheets (N carbon@N-ZnO) obtained from bacterial cellulose biomass (BC) for the removal of persistent pharmaceutical substances such as tetracycline and di-chlorophenol. The degradation efficiency of tetracycline was about 97%, with visible light.
The literature also indicates photocatalysts obtained by green synthesis in the form of a quaternary nanocomposite of the P-doped graphitic carbon nitride (PGCN)/AgI/ZnO/CQD type, from bamboo leaves, used for photocatalysis assisted adsorption at pH 4 of 2,4-dinitrophenol, with an efficiency of about 98% in 2 h (Hasija et al. 2019). The efficiency of approx. 89% after 10 reuse cycles was also worth noting. According to the known reaction mechanisms, CQD completes the degradation rate, the carbon source leading to an increase in the adsorption rate and a reduction in the recombination rate (Hasija et al. 2019).
ZnO NPs show photocatalytic performance under UV light in the treatment of pharmaceutical pollutants such as cloxacillin and ciprofloxacin (CIP), and triangular silver nanoplates (T-Ag)/ZnO and ZnO/N,S-doped carbon quantum dots (N,S-CQDs) nanoflowers showed high efficiency for the degradation of norfloxacin in light visible, due to the synergistic and surface plasmon resonance effect of T-Ag on ZnO nanoflowers as well as the transfer of photogenerated electrons from the ZnO conduction band to the N,S-CQD surface (Verma et al. 2021; Elmolla and Chaudhuri 2010; Shi-Lin Zhou et al. 2016; Yanning Qu et al. 2020).
The photocatalytic activity of ZnO/N,S-CQD nanoflowers under simulated sunlight is about 92.9% and 85.8% of CIP respectively was degraded at 20 min and 50 min respectively. The degradation efficiency of cephalexin (CEL) was 86.7% after 50 min (Yanning Qu et al. 2020).
Qu et al. carried out tests on the photodegradation of organic pollutants in real water, using ZnO/N,S-CQD nanoflowers under simulated sunlight irradiation for CIP, CEL, and MB. The waters were fortified with pollutants where there was only one. When the fortification was made with CIP and MB, the degradation was about 73.6% and 95.1%, respectively. In the case of CIP and CEL, the degradation was approximately 71.7% and 70%, respectively. In the case of the CIP-CEL-MB triple system, the efficiency for antibiotics was about 60% and 94.9% for MB (Yanning Qu et al. 2020). The ZnO/N, S-CQD hybrid composite obtained by a hydrothermal method tested for CIP varied from 92.9% under simulated light at 20 min to about 85.8% for 50 min under natural light (Mei et al. 2022; Yanning Qu et al. 2020).
Although camphor leaf biochar was created as an adsorbent for CIP removal, its effectiveness was constrained by its low specific surface area and adsorption capacity. A novel technique for producing magnetic biochar enhanced with ZnO nanoparticles was created to address this. A dose of 0.2 g/L of the resultant ZnO/biochar nanoadsorbent was tested for the removal of CIP at pH 4 and 40 °C, obtaining a maximum adsorption capacity of 449.40 mg/L after 24-h contact time. The adsorption mechanism involved π-π interaction, H-bond, electrostatic interaction, and hydrophobic interaction.
ZnO/N,S-CQD nanoflowers were obtained by the separate synthesis of N,S-CQD by hydrothermal treatment of carbonized L-cysteine with nitric acid in the presence of ethylene glycol as a passivating agent. ZnO NPs were obtained from precursor Zn(NO3)2·6H2O, the obtained solutions being mixed in different proportions with N,S-CQD, then placed in an autoclave at 100 °C for 12 h (Yanning Qu et al. 2020).
Compared to other metal oxide semiconductor photocatalytic materials, ZnO exhibits better photosensitivity and photochemical stability (M Arunpandian et al. 2020). There are numerous studies on the photodegradation of organic compounds, mainly dyes such as MB, Rhodamine, benzoic acid, and Congo red (Al Ja’farawy et al. 2022). The advantage of using ZnO is that the degradation of pollutants can take place by using sunlight, through the active sites and hydroxyl radicals on the surface of the photocatalyst (Bhuyan et al. 2015). However, in order to ensure a good dispersion, stability, and biocompatibility with the environments in which these NPs are used, quantum dot (CQD) particles in combination with ZnO offer high electronic conductivity and tunable photoluminescence, and the functional groups on the CQD surface stimulate adsorption of dyes.
Carbon nanostructures show electron storage capacity and can be combined with ZnO NPs (Ru Wang et al. 2017a). CQDs can act as an electron sink by preventing the recombination of electron–hole pairs. It is believed that CQDs can act as mediator electrons to increase the efficiency of visible light separation, increasing the concentration of free radicals such as O2∙ and ∙OH (Al Ja’farawy et al. 2022; Ru Wang et al. 2017a). The photocatalytic degradation mechanism is based on photoexcited electron transfer from CB of ZnO to CQD. The presence of CQDs delays the recombination of charge carriers due to the carbon nanostructure that offers a high electron storage capacity (Al Ja’farawy et al. 2022).
The advantages of synthesized composite in comparison with simple ZnO are the narrowing band gap, decreasing recombination rate, surface roughness, and greater ability to absorb dye molecules. The synthesis of different ZnO-rGO and ZnO-GO nanocomposites has received a lot of attention. The development of ZnO-rGO and ZnO-GO heterostructures has been found to increase light absorption, enhance charge separation and transportation, and lengthen the functional lifetime of photocatalysts, according to studies that have been conducted to date.
Various methods for synthesizing ZnO-rGO and ZnO-GO nanocomposites involve incorporating ZnO NPs onto the surfaces of GO or rGO materials (Yaqoob et al. 2020b). ZnO NPs and nanorods offer advantages such as large surface areas, providing numerous active sites for pollutant adsorption and photodegradation, high ROS generation under UV light, chemical stability, and scalable synthesis. However, challenges like high photocorrosion activity and low photosensitivity under visible light hinder their potential use. In contrast, GO and rGO have been proposed as excellent ZnO substrates due to their high surface areas and active adsorption sites. The formation of ZnO-rGO and ZnO-GO nanocomposites shows promise for wastewater decontamination, but other morphologies and reactor integration have been underexplored.
Reduced recombination losses in ZnO-rGO or ZnO-GO heterostructures are the cause of the increased photocatalytic activity in ZnO-rGO and ZnO-GO nanocomposites. Further research on visible light photodegradation processes is necessary because of their problematic performance under visible light. Furthermore, there has not been much discussion in the literature about the recyclable and reusable nature of these nanocomposites. To fully realize the potential of photocatalysis for wastewater treatment, a comprehensive strategy that combines reactor design and photocatalyst production is required. The fundamental technical and scientific obstacles preventing their employment in technologically and industrially relevant applications must be overcome, although there are still substantial problems to be solved.
ZnO NPs—clay-based supports
The immobilization of ZnO NPs for the controlled use of ZnO in photocatalytic processes can also take place on clay minerals such as montmorillonite, bentonite, halloysite, sepiolite, and zeolite (Le et al. 2022). The use of these minerals has the advantage of availability and low cost. Immobilization methods can be by precipitation, sol–gel, impregnation, and hydrothermal (Akkari et al. 2018b, 2016; Khataee et al. 2017; Fatimah et al. 2011; Hadjltaief et al. 2018).
ZnO NP/clay-type photocatalyst with dimensions between 9 and 13 nm shows high degradation and adsorption efficiencies for methylene green of about 90% and for Congo red of about 88%. Adsorption is dependent on the pH and functional groups of the dye. Based on UV, the dyes adsorbed on the ZnO/clay surface are mineralized by OH∙- and O2∙−-type reactive species. The immobilization of ZnO on clay led to the increase of active sites on the ZnO surface necessary for the formation of reactive oxygen species (Le et al. 2022).
The major disadvantage also appears in the separation process, which remains quite difficult, so that recovery is also challenging (Siahpoosh and Soleimani 2017; Massaro et al. 2020; Peng et al. 2017). The literature indicates obtaining a ZnO-Fe3O4 composite immobilized on sepiolite (Akkari et al. 2016). The advantage of such a composite is represented by the magnetic properties of Fe3O4, which can help to efficiently separate the material from water, after being used as a photocatalyst for the degradation of IBP under sunlight. The degradation was about 88%, the recovery and reuse of ZnO/Fe3O4-sepiolite being possible after several operating cycles.
Furosemide represents one of the major emerging pollutants and photocatalytic degradation is a viable option demonstrated at different concentrations with different power lamps (1000 W Xe, 125 W Hg, and 8 W UVA) (Heidari et al. 2020). Another photocatalyst based on ZnO deposited on clay with an intermediate carbon layer used in the degradation of estrogens (E1, E2, E3, EE2), included in the EPs class, led to the degradation of about 90% with normal illumination (Bayode et al. 2021b).
The reuse of the ZnO/ion exchange clinoptilolite nanophotocatalyst (ICLT) was possible for 5 consecutive cycles, showing excellent chemical stability. In this sense, it can be observed that after the 5th cycle, the nanophotocatalyst still shows 93.7% of its initial activity, due to the strong bonds created between the ZnO NPs and the ICLT support.
The nanophotocatalyst ZnO/ICLT prepared by sonoprecipitation demonstrated high photocatalytic activity for the degradation of furosemide. The zinc acetate precursor in the presence of NaOH was introduced into a homogeneous suspension dispersed by zeolite, which after about 2 h led to the formation of a precipitate. This by calcination led to homogeneous nanoarchitectures (Heidari et al. 2020).
An example of the efficiency of these supports is the degradation of CIP at pH 7, 30 min, up to about 96%, according to pseudo-prime and Langmuir–Hinshelwood kinetics. The nanophotocatalyst was obtained by synthesizing ZnO NPs using the thermal method and immobilizing them on the surface of granular porous stones. Zinc acetate was used to obtain thin films of ZnO that were deposited on the stones by the immersion coating method, followed by oven drying (Mahdizadeh et al. 2015; Mohammad Malakootian et al. 2019b).
IBP shows stability through UV irradiation, an efficient solution, due to the anionic form present in the solution being the direct adsorption on the clays. Nanoarchitectures of the ZnO/sepiolite type led to degradations of about 75% after 10 h, due to the presence of ZnO NPs (Akkari et al. 2018a).
ZnO NPs deposited on a stone support represent a photocatalyst with performance in the decontamination of waters contaminated with pharmaceutical pollutants and those originating from the textile industry. The elimination of phenazopyridine from wastewater can take place in a proportion of about 70% at a pH of 6.0, using this photocatalyst. Chemical oxygen demand (COD) values indicate a removal of more than 50% at natural pH (Mahdizadeh et al. 2015).
Pharmaceutical products detected in waters as EPs present increased risks for the safety of people and the environment. Photocatalytic techniques present a solution for ACE and ANT products, when the photocatalyst is a TiO2-ZnO/clay nanoarchitecture. The photocatalysts were obtained by the modified sol–gel method, Ti and Zn precursors were added to the clay dispersion, and the resulting gel, after drying, was calcined at 500 °C (Tobajas et al. 2017). TiO2-ZnO nanoparticles incorporated on the surface of a clay indicated the possibility of total degradation of ACE and ANT, after 10 h, under sunlight, due to the heterojunction that reduces electron–hole recombination. The photocatalyst showed stability after 4 operating cycles (Tobajas et al. 2017).
Low surface area, quick aggregation, and small particle size are some of ZnO NPs’ drawbacks, which make it difficult to recover them from aqueous solutions. Furthermore, releasing ZnO NPs into the environment can be hazardous to human health and the ecosystem. Immobilizing ZnO NPs onto a suitable matrix provides a remedy for these problems. In comparison to unsupported metal oxide nanoparticles, supported nanoparticles often have greater adsorption capacity, mechanical characteristics, thermal stability, and a higher specific surface area. Due to its low cost and wide availability, clay stands out as the best material to use for this. Clay’s natural structure also offers significant physical and chemical qualities such specific surface area, water retention capacity, ion exchange capability, and reactivity (Bel Hadjltaief et al. 2016).
The combination of ZnO nanoparticles with Tunisian clay (referred to as ZnO clay) effectively adsorbed and removed malachite green and Congo red dyes (Hadjltaief et al. 2018). When subjected to simulated solar light, the ZnO-clay composite exhibited superior photocatalytic performance in comparison to UV irradiation. The composite’s zero point charge (pHpzc) was found to be 6.58 in the neutral pH range, rendering it a highly efficient adsorbent and photocatalyst for both positively charged (cationic) and negatively charged (anionic) dyes. Consequently, the ZnO-clay composite could efficiently adsorb and photodegrade cationic dyes in alkaline conditions (pH > 8) and anionic dyes in acidic conditions (pH < 4) (Gusain et al. 2019).
ZnO NPs—other supports
The literature also indicates different supports that can incorporate ZnO NPs from stainless steel wire (Abd Aziz et al. 2014; Linhua Xu et al. 2020) and mesh (Vu et al. 2013; Jung and Yong 2011; Xiaofei Wang et al. 2017b), ceramic plate (Aditya et al. 2019; Shavisi et al. 2016), stone (Mohammad Malakootian et al. 2019b; Mahdizadeh et al. 2015; Mohammad Malakootian et al. 2019a), shells (Shirzad-Siboni et al. 2014), aluminum (Al2O3) (Huihu Wang et al. 2012a; Stojadinović et al. 2020), Zn plate (Ramirez-Canon et al. 2018), Ni foam (Zhu et al. 2020), woven cotton (Baruah et al. 2019) and bamboo (Jin et al. 2014), and pineapple leaf fibers (Le et al. 2022; Deebansok et al. 2021).
A ternary Au-SnO2-CdS photocatalyst was used for the degradation of about 95% imidacloprid, at pH 4, according to a pseudo-first-order reaction, with a stability of about 15% after 6 cycles. The analyzed insecticide was also tested with other photocatalysts for which the removal rates were lower: tungstophosphoric acid HPW/TiO2 83% and Ag-ZnO 52% (Mohanta and Ahmaruzzaman 2021).
ZnO with nanostar (NSt) morphology was also used in the composition of Ag@ZnONSt and Pd@ZnONSt photocatalysts for the degradation of methyl parathion (MPT), pendimethalin (PDM), and trifluralin (TFL). Pd@ZnONSt had 99.8% degradation efficiency and stability over six degradation cycles (Veerakumar et al. 2021).
A number of studies on nanostructured ZnO are related to their practical and secure integration into different macromolecular composites, such as polyesters (Yuan et al. 2016), polysaccharides, polyethylene glycol (Melinte et al. 2019), poly (N-isopropylacrylamide) (Podasca et al. 2016), and hybrid polymers (Nicolay et al. 2015). Based on the numerous reports referring to the enhancement of the photocatalytic efficiency of ZnO nanomaterials, polyaniline (PANI) has received significant interest as it has been considered one of the most promising materials for enhancing the electrochemical and photocatalytic performance of ZnO. The fact that methylene blue (MB) is usually often chosen as a model pollutant to assess the photocatalytic activities under UV/visible light irradiation at ambient temperature is another intriguing feature. According to Qin et al., PANI-ZnO NPs presented a high photocatalytic activity (reaction rate constant k = 1.944 × 102 min−1) when removing a high concentration of MB (Qin et al. 2018).
By using an in situ chemical polymerization approach to create PANI-ZnO nanocomposites, one of the prerequisites for an effective photocatalyst has been met. Additionally, the glassy carbon electrode (GCE) was combined with PANI-ZnO hybrids created in this study, and the combined PANI-ZnO/GCE system was evaluated for its potential as a microbial fuel cell anode. Through the chemical oxidative polymerization of aniline, Eskizeybek et al. developed PANI/ZnO nanocomposites and looked into how MB and malachite green (MG) dyes in aqueous medium were degraded under both natural and UV light irradiation (Eskizeybek et al. 2012). The results showed that after 5 h of exposure to natural light, a dose of 0.4 g/L of PANI/ZnO nanocomposite photocatalyst degraded both dyes with 99% efficiency. PANI/ZnO nanocomposites with higher activity as a result of the intermolecular interactions and increased crystallinity between the conducting polymer and ZnO NPs were synthesized by Saravanan et al. They investigated the faster degradation of MB (k = 2.575 × 102 min−1) in comparison with MO dye (k = 2.325 × 102 min−1), which was likely due to the latter’s simpler structure (Saravanan et al. 2016).
The removal of metronidazole (MNZ), a synthetic antibacterial agent, from wastewater before it is released into the environment has drawn significant attention due to its non-biodegradability and high solubility in water. Asgari et al. recently looked into the ZnO/PANI nanocomposites’ photocatalytic capacity for degrading MNZ when exposed to UV and visible light. They found that the ZnO/PANI nanocomposite presented a rate of MNZ degradation (k = 2.53 × 102 min−1) almost 63 times faster than that of the pure ZnO photocatalyst’s (k = 0.04 × 102 min−1) (Asgari et al. 2019). In MNZ degradation, the importance of hydroxyl radicals (∙OH) and superoxide anion radicals (∙O2) was emphasized. Improved visible light absorption and a decrease in charge carrier recombination were related to the photocatalytic activity under UV and visible irradiation. After 6 cycles, the photocatalytic effectiveness under UV and visible irradiations only decreased by 9% and 8%, respectively. As a result, the findings demonstrated that the ZnO/PANI nanocomposite had excellent stability and could be utilized repeatedly.
The synthesis of composite photocatalysts using ZnO nanoparticles and polypyrrole (PPy) is also discussed in the literature. These composites were made using PPy to ZnO ratios of 5:1 and 25:1, respectively (Silvestri et al. 2019). By observing the breakdown of diclofenac (DCF) under artificial solar light, the photocatalytic activity of these PPy-ZnO composites was evaluated. The outcomes demonstrated that the PPy-ZnO 25:1 composite was approximately twice as efficient as pure ZnO and had a higher photocatalytic rate constant (k = 0.986 min−1) than the PPy-ZnO 5:1 composite. The sensitizing impact of PPy was said to be responsible for this improvement. However, it was demonstrated that a high PPy to ZnO ratio could result in flaws on the PPy surface that act as recombination centers for electron–hole pairs and lead to lower photocatalytic activity. The study also showed that after three consecutive cycles of degradation, the PPy-ZnO 25:1 composite maintained its photocatalytic activity, showing its potential for reuse.
Polysaccharides and biopolymers are commonly used as modifiers (capping agents) in the synthesis of biogenic ZnO NPs (Yaqoob et al. 2020a). Chitosan is a naturally occurring polysaccharide found in crustaceans and insects and has garnered considerable attention for its role in synthesizing metal and metal oxide NPs, including ZnO NPs. Chitosan possesses essential functional groups, including amino and hydroxyl groups, which play a crucial role in the removal of different pollutants from water. As a result, it is widely recognized as an environmentally friendly capping agent (size control agent) in the synthesis of various metal and metal oxide NPs (ZnO, MgO, TiO2) (Ben Amor et al. 2023). Previous research has demonstrated that chitosan offers several advantages when used for surface functionalization of metallic NPs, like the improvement of optical properties, enhancement of antimicrobial activity, and facilitation of drug loading and release (Ben Amor et al. 2022).
By using sol–gel and ultrasound-assisted techniques, several nanocomposites based on metal oxides and chitosan (TiO2-ZnO, TiO2-ZnO/CS, and TiO2-ZnO/CS-Gr) were developed (Patehkhor et al. 2021). These materials were then used under UV light to assess the photocatalytic degradation of tetracycline. The following BET, FESEM, EDX, FT-IR, and XRD techniques were used to characterize the produced materials. At the optimal operational conditions (tetracycline concentration of 20 mg/L, pH = 4, catalyst dosage of 0.5 g/L, and 3 h of irradiation time), the TiO2-ZnO with the 1:1 molar ratio supported with 1:2 weight ratio CS-Gr (T1Z1/CS1Gr2 sample) proved to be the most efficient composite achieving 97.2% photodegradation of tetracycline. As anticipated, chitosan and graphene significantly improved the results of the degrading process. Taking into account the used operational settings, this innovative photocatalyst is capable of treating pharmaceutical wastewater.
Future trends and conclusions
It has been proven that ZnO NPs are an extremely versatile material with photodegradation activity, comparable or even better than chemically produced ones. Currently, the ZnO NP market includes the cosmetic industry, food products, coatings, sun care, paints, construction, buildings, antibacterial, and applications from materials science, optics, biomedicine, or electronics. This market is estimated to grow by 7.5% from 2022, so it will reach US$ 525.32 million by 2029.
The present research highlights the latest ecological strategies regarding the development of ZnO nanoparticles through simple, low-cost, and large-scale methods. The review provides a fundamental overview of green syntheses for ZnO NPs as a single material or embedded into a matrix compared to classical syntheses. The stability and minimization of losses of ZnO NPs in the environment after their use inspire recent research towards the identification of a stabilization matrix for these NPs. The main performances of ZnO NPs integrated into a stable, environmentally friendly matrix useful for EP degradation were presented, emphasizing the ZnO NP preparation method and material morphology linked with each EP degradation condition. ZnO NPs embedded into a carbon matrix support represent a viable alternative to current techniques and could also be obtained from waste materials.
This literature research was based on an extensive data collection from 2000 to present and selection method of the main articles cited in this review is described in the paper. The motivation of this study also lies in the current market situation regarding the performance of nanotechnologies in water decontamination. Considering the potential of ZnO NPs, the market of nanomaterials in water and wastewater treatment will include these types of NPs due their potential to EPs.
This research, as academic writing, offers an extensive overview of the current knowledge in ZnO photocatalyst alternative routes of preparation and its performance in the degradation of emerging pollutants. Green synthesis offers ecological alternatives, especially for vegetable waste that can become precursors for the synthesis of ZnO nanostructures. The article addresses a specific topic, namely, ZnO as a versatile and cost-effective photocatalyst when compared to TiO2. This research also provides young researchers and students with a holistic conceptualization and synthesis of the literature regarding the importance of green synthesis in ZnO photocatalysts as sustainable materials for degrading emerging pollutants.
The market research carried out by maximize market research indicates a growth of 9.1% through 2022 to 2027, reaching nearly US$ 2.7 billion, regarding Global Nanotechnology in Water Treatment (including industrial and potable water treatment) (Maximize Market Research). The most effective methods involve nanomembrane systems, essential in pollutant removal and softening, especially for pharmaceutical contaminants. In addition, nanoadsorbents are included in this report as efficient materials for a wide range of organic and inorganic pollutants. An ideal nanomaterial is the one with the smallest possible dimensions to exhibit catalytic potential and reactivity through a large specific surface area; systems that include metal oxides such as ZnO will represent the next generation of sustainable materials.
Because the risk of reaching the environment, after being used as a photocatalyst, is quite high, due to the small size, the creation of some supports that incorporate these NPs represents a viable alternative to current techniques. The most used support materials are the carbon ones, with proven properties and which in turn can be obtained from waste. Currently, the photocatalytic activity of these NPs is recognized, and these applications will represent a potential nexus on the research market.
The conventional preparation methods of ZnO NPs are associated with toxicity, which has been a restraining factor for the global ZnO NP market. However, the new trend in green synthesis is bringing attention to new perspectives regarding the acquisition and integration of these NPs. The investments in the ZnO NP sector are in expansion and linked with research and development in industry. Environmental concerns regarding EPs bring into question new industrial solutions and participants in the global market. Future researches should be developed on the cost–benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.
Data availability
Not applicable.
Abbreviations
- AC:
-
Activated carbon
- ACE:
-
Acetaminophen
- AFM:
-
Atomic force microscopy
- ANT:
-
Antipyrine
- AOP:
-
Advanced oxidation process
- ARG:
-
Antibiotic resistance genes
- ASW:
-
Artificial sweeteners
- BPA:
-
Bisphenol A
- CEL:
-
Cephalexin
- CIP:
-
Ciprofloxacin
- CQDs:
-
Carbon quantum dots
- DBP:
-
Disinfection byproducts
- EDC:
-
Endocrine-disrupting chemicals
- ENM:
-
Engineered nanomaterials
- EPs:
-
Emerging pollutants
- FT-IR:
-
Fourier-transform infrared spectroscopy
- GO:
-
Graphene oxide
- gC3N4 :
-
Graphitic carbon nitride
- HPW:
-
Tungstophosphoric acid
- IBP:
-
Ibuprofen
- ICLT:
-
Ion exchange clinoptilolite
- MB:
-
Methylene blue
- MgAC:
-
Magnesium aminoclay
- MO:
-
Methylene orange
- MP:
-
Microplastics
- MPT:
-
Methyl parathion
- NSt:
-
Nanostars
- N,S-CQDs:
-
N,S-doped carbon quantum dots
- PDM:
-
Pendimethalin
- PE:
-
Photodegradation efficiency
- PGCN:
-
P-doped graphitic carbon nitride
- PhAC:
-
Pharmaceutically active compounds
- PPCP:
-
Personal care products
- rGO:
-
Reduced graphene oxide
- ROS:
-
Reactive oxygen species
- SEM:
-
Scanning electron microscopy
- T-Ag:
-
Triangular silver nanoplates
- TEM:
-
Transmission electron microscopy
- TFL:
-
Trifluralin
- ThB:
-
Thymol blue
- UV-Vis:
-
Ultraviolet-visible spectroscopy
- XRD:
-
X-ray diffraction
- ZnO NPs:
-
Zinc oxide nanoparticles
References
Abbas M, Rao BP, Kim C (2014) Shape and size-controlled synthesis of Ni Zn ferrite nanoparticles by two different routes. Mater Chem Phys 147(3):443–451
Abd Aziz SNQA, Pung S-Y, Ramli NN (2014) Lockman Z (2014) Growth of ZnO nanorods on stainless steel wire using chemical vapour deposition and their photocatalytic activity. Sci World J 8–9:252851
Abdelraheem WH, Patil MK, Nadagouda MN, Dionysiou DD (2019) Hydrothermal synthesis of photoactive nitrogen-and boron-codoped TiO2 nanoparticles for the treatment of bisphenol A in wastewater: Synthesis, photocatalytic activity, degradation byproducts and reaction pathways. Appl Catal B 241:598–611
Abebe B, Zereffa EA, Tadesse A, Murthy HCA (2020) A review on enhancing the antibacterial activity of ZnO: mechanisms and microscopic investigation (review). Nanoscale Res Lett 15(1):19. https://doi.org/10.1186/s11671-020-03418-6
Aber S, Tajdid Khajeh R, Khataee A (2019) Application of immobilized ZnO nanoparticles for the photocatalytic regeneration of ultrasound pretreated-granular activated carbon. Ultrason Sonochem 58:104685. https://doi.org/10.1016/j.ultsonch.2019.104685
Abukhadra MR, Helmy A, Sharaf MF, El-Meligy MA, Ahmed Soliman AT (2020) Instantaneous oxidation of levofloxacin as toxic pharmaceutical residuals in water using clay nanotubes decorated by ZnO (ZnO/KNTs) as a novel photocatalyst under visible light source. J Environ Manage 271:111019. https://doi.org/10.1016/j.jenvman.2020.111019
Adam RE, Pozina G, Willander M, Nur O (2018) Synthesis of ZnO nanoparticles by co-precipitation method for solar driven photodegradation of Congo red dye at different pH (Article). Photon Nanostruct-Fundam Appl 32:11–18. https://doi.org/10.1016/j.photonics.2018.08.005
Adeola AO, Abiodun BA, Adenuga DO, Nomngongo PN (2022) Adsorptive and photocatalytic remediation of hazardous organic chemical pollutants in aqueous medium: a review. J Contam Hydrol 248:104019
Aditya W, Notodarmodjo S, Helmy Q 536 (2019) ‘Decolorization of Reactive black-5 Dye by UV based photocatalytic with immobilized ZnO nanoparticles onto ceramic plate surface’ IOP Conference Series: Materials Science and Engineering. IOP Publishing p 0120681
Agarwal H, Kumar SV, Rajeshkumar S (2017) A review on green synthesis of zinc oxide nanoparticles–an eco-friendly approach. Resour-Efficient Technol 3(4):406–413
Ahmed MA, Abou-Gamra ZM, Alshakhanbeh MA, Medien H (2019) Control synthesis of metallic gold nanoparticles homogeneously distributed on hexagonal ZnO nanoparticles for photocatalytic degradation of methylene blue dye. Environ Nanotechnol Monit Manage 12:100217. https://doi.org/10.1016/j.enmm.2019.100217
Ahmed S, Khan FSA, Mubarak NM, Khalid M, Tan YH, Mazari SA et al (2021) Emerging pollutants and their removal using visible-light responsive photocatalysis–a comprehensive review. J Environ Chem Eng 9(6):106643
Ajala O, Tijani J, Salau R, Abdulkareem A, Aremu O (2022) A review of emerging micro-pollutants in hospital wastewater: environmental fate and remediation options. Results Eng 16:100671
Akhter SMH, Mahmood Z, Ahmad S, Mohammad F (2018) Plant-mediated green synthesis of zinc oxide nanoparticles using Swertia chirayita leaf extract, characterization and its antibacterial efficacy against some common pathogenic bacteria. Bionanoscience 8:811–817
Akkari M, Aranda P, Rhaiem HB, Amara ABH, Ruiz-Hitzky E (2016) ZnO/clay nanoarchitectures: synthesis, characterization and evaluation as photocatalysts. Appl Clay Sci 131:131–139
Akkari M, Aranda P, Amara A, Ruiz-Hitzky E (2018) Clay-nanoarchitectures as photocatalysts by in situ assembly of ZnO nanoparticles and clay minerals. J Nanosci Nanotechnol 18(1):223–233
Akkari M, Aranda P, Belver C, Bedia J, Amara ABH, Ruiz-Hitzky E (2018) Reprint of ZnO/sepiolite heterostructured materials for solar photocatalytic degradation of pharmaceuticals in wastewater. Appl Clay Sci 160:3–8
Akowuah GA, Zhari I (2010) Effect of extraction temperature on stability of major polyphenols and antioxidant activity of Orthosiphon stamineus leaf. J Herbs Spices Med Plants 16(3–4):160–166. https://doi.org/10.1080/10496475.2010.509652
Akpan UG, Hameed BH (2009) Parameters affecting the photocatalytic degradation of dyes using TiO2-based photocatalysts: a review. J Hazard Mater 170(2):520–529. https://doi.org/10.1016/j.jhazmat.2009.05.039
Al Ja’farawy MS, Purwanto A, Widiyandari H (2022) Carbon quantum dots supported zinc oxide (ZnO/CQDs) efficient photocatalyst for organic pollutant degradation–a systematic review. Environ Nanotechnol Monit Manage 18:100681
Aladpoosh R, Montazer M (2015) The role of cellulosic chains of cotton in biosynthesis of ZnO nanorods producing multifunctional properties: mechanism, characterizations and features. Carbohyd Polym 126:122–129
Alamdari S, Sasani Ghamsari M, Lee C, Han W, Park H-H, Tafreshi MJ et al (2020) Preparation and characterization of zinc oxide nanoparticles using leaf extract of Sambucus ebulus. Appl Sci 10(10):3620
Alammar T, Mudring AV (2011) Sonochemical synthesis of 0D, 1D, and 2D zinc oxide nanostructures in ionic liquids and their photocatalytic activity. Chemsuschem 4(12):1796–1804
Al-Dahash G, Khilkala WM, Vahid SNA (2018) Preparation and characterization of ZnO nanoparticles by laser ablation in NaOH aqueous solution (article). Iranian J Chem Chem Eng-Int English Ed 37(1):11–16
Ali Dheyab M, Aziz AA, Jameel MS (2021) Recent advances in inorganic nanomaterials synthesis using sonochemistry: a comprehensive review on iron oxide, gold and iron oxide coated gold nanoparticles. Molecules 26(9):2453
Alias S, Ismail A, Mohamad A (2010) Effect of pH on ZnO nanoparticle properties synthesized by sol–gel centrifugation. J Alloy Compd 499(2):231–237
Alves T, Kolodziej C, Burda C, Franco A Jr (2018) Effect of particle shape and size on the morphology and optical properties of zinc oxide synthesized by the polyol method. Mater Des 146:125–133
Ambika S, Sundrarajan M (2015) Antibacterial behaviour of Vitex negundo extract assisted ZnO nanoparticles against pathogenic bacteria. J Photochem Photobiol, B 146:52–57
Amdany R, Chimuka L, Cukrowska E (2014) Determination of naproxen, ibuprofen and triclosan in wastewater using the polar organic chemical integrative sampler (POCIS): a laboratory calibration and field application (Article). Water Sa 40(3):407–414. https://doi.org/10.4314/wsa.v40i3.3
Anbuvannan M, Ramesh M, Viruthagiri G, Shanmugam N, Kannadasan N (2015) Synthesis, characterization and photocatalytic activity of ZnO nanoparticles prepared by biological method. Spectrochim Acta Part A Mol Biomol Spectrosc 143:304–308
Anžlovar A, Orel ZC, Kogej K, Žigon M (2012) Polyol-mediated synthesis of zinc oxide nanorods and nanocomposites with poly (methyl methacrylate). J Nanomater 2012:31–31
Aragaw TA, Bogale FM, Aragaw BA (2021) Iron-based nanoparticles in wastewater treatment: a review on synthesis methods, applications, and removal mechanisms. J Saudi Chem Soc 25(8):101280. https://doi.org/10.1016/j.jscs.2021.101280
Arbuj SS, Hawaldar RR, Mulik UP, Amalnerkar DP (2013) Preparation, characterisation and photocatalytic activity of Nb2O5/TiO2 coupled semiconductor oxides. J Nanoeng Nanomanuf 3(1):79–83
Arbuj SS, Mulik UP, Amalnerkar DP (2013) Synthesis of Ta2O5/TiO2 coupled semiconductor oxide nanocomposites with high photocatalytic activity. Nanosci Nanotechnol Lett 5(9):968–973
Arunpandian M, Selvakumar K, Raja A, Rajasekaran P, Thiruppathi M, Nagarajan ER et al (2019) Fabrication of novel Nd2O3/ZnO-GO nanocomposite: an efficient photocatalyst for the degradation of organic pollutants. Colloids Surf, A 567:213–227. https://doi.org/10.1016/j.colsurfa.2019.01.058
Arunpandian M, Selvakumar K, Raja A, Rajasekaran P, Ramalingan C, Nagarajan E et al (2020) Rational design of novel ternary Sm2WO6/ZnO/GO nanocomposites: an affordable photocatalyst for the mitigation of carcinogenic organic pollutants. Colloids Surf, A 596:124721
Asgari E, Esrafili A, Jafari AJ, Kalantary RR, Nourmoradi H, Farzadkia M (2019) The comparison of ZnO/polyaniline nanocomposite under UV and visible radiations for decomposition of metronidazole: degradation rate, mechanism and mineralization (Article). Process Saf Environ Prot 128:65–76. https://doi.org/10.1016/j.psep.2019.05.050
Azizi S, Ahmad MB, Namvar F, Mohamad R (2014) Green biosynthesis and characterization of zinc oxide nanoparticles using brown marine macroalga Sargassum muticum aqueous extract (Article). Mater Lett 116:275–277. https://doi.org/10.1016/j.matlet.2013.11.038
Bai X, Sun C, Liu D, Luo X, Li D, Wang J et al (2017) Photocatalytic degradation of deoxynivalenol using graphene/ZnO hybrids in aqueous suspension. Appl Catal B 204:11–20. https://doi.org/10.1016/j.apcatb.2016.11.010
Bai S, Sun X, Han N, Shu X, Pan J, Guo H et al (2020) rGO modified nanoplate-assembled ZnO/CdO junction for detection of NO2. J Hazard Mater 394:121832
Banerjee P, Chakrabarti S, Maitra S, Dutta BK (2012) Zinc oxide nano-particles–sonochemical synthesis, characterization and application for photo-remediation of heavy metal. Ultrason Sonochem 19(1):85–93
Barreto GP, Morales G, Quintanilla MLL (2013) Microwave assisted synthesis of ZnO nanoparticles: effect of precursor reagents, temperature, irradiation time, and additives on nano-ZnO morphology development. J Mater 2013:1–11
Baruah B, Downer L, Agyeman D (2019) Fabric-based composite materials containing ZnO-NRs and ZnO-NRs-AuNPs and their application in photocatalysis. Mater Chem Phys 231:252–259
Barzinjy AA, Hamad SM, Abdulrahman AF, Biro SJ, Ghafor AA (2020) Biosynthesis, characterization and mechanism of formation of ZnO nanoparticles using Petroselinum crispum leaf extract. Curr Org Synth 17(7):558–566
Basavegowda N, Somu P, Shabbirahmed AM, Gomez LA, Thathapudi JJ (2022) Bimetallic p-ZnO/n-CuO nanocomposite synthesized using Aegle marmelos leaf extract exhibits excellent visible-light-driven photocatalytic removal of 4-nitroaniline and methyl orange. Photochem Photobiol Sci 21(8):1357–1370. https://doi.org/10.1007/s43630-022-00224-0
Basnet P, Chanu TI, Samanta D, Chatterjee S (2018) A review on bio-synthesized zinc oxide nanoparticles using plant extracts as reductants and stabilizing agents. J Photochem Photobiol, B 183:201–221
Bayode AA, dos Santos DM, Omorogie MO, Olukanni OD, Moodley R, Bodede O et al (2021) Carbon-mediated visible-light clay-Fe2O3–graphene oxide catalytic nanocomposites for the removal of steroid estrogens from water. J Water Process Eng 40:101865
Bayode AA, Vieira EM, Moodley R, Akpotu S, de Camargo AS, Fatta-Kassinos D et al (2021) Tuning ZnO/GO pn heterostructure with carbon interlayer supported on clay for visible-light catalysis: removal of steroid estrogens from water. Chem Eng J 420:127668
Behnood R, Sodeifian G (2020) Synthesis of N doped-CQDs/Ni doped-ZnO nanocomposites for visible light photodegradation of organic pollutants. J Environ Chem Eng 8(4):103821. https://doi.org/10.1016/j.jece.2020.103821
Bekkari R, Boyer D, Mahiou R, Jaber B (2017) Influence of the sol gel synthesis parameters on the photoluminescence properties of ZnO nanoparticles. Mater Sci Semicond Process 71:181–187
Bel Hadjltaief H, Ben Zina M, Galvez ME, Da Costa P (2016) Photocatalytic degradation of methyl green dye in aqueous solution over natural clay-supported ZnO–TiO2 catalysts. J Photochem Photobiol, A 315:25–33. https://doi.org/10.1016/j.jphotochem.2015.09.008
Ben Amor I, Hemmami H, Laouini SE, Mahboub MS, Barhoum A (2022) Sol-gel synthesis of ZnO nanoparticles using different chitosan sources: effects on antibacterial activity and photocatalytic degradation of AZO dye (article). Catalysts 12(12):16. https://doi.org/10.3390/catal12121611
Ben Amor I, Hemmami H, Laouini SE, Ben Temam H, Zaoui H, Barhoum A (2023) Biosynthesis MgO and ZnO nanoparticles using chitosan extracted from Pimelia payraudi latreille for antibacterial applications (article). World J Microbiol Biotechnol 39(1):12. https://doi.org/10.1007/s11274-022-03464-5
Benton O, Apollo S, Naidoo B, Ochieng A (2016) Photodegradation of molasses wastewater using TiO2-ZnO nanohybrid photocatalyst supported on activated carbon (article). Chem Eng Commun 203(11):1443–1454. https://doi.org/10.1080/00986445.2016.1201659
Bhatia V, Dhir A, Ray AK (2021) Photocatalytic degradation of atenolol with graphene oxide/zinc oxide composite: optimization of process parameters using statistical method. J Photochem Photobiol, A 409:113136
Bhatte KD, Sawant DN, Pinjari DV, Pandit AB, Bhanage BM (2012) One pot green synthesis of nano sized zinc oxide by sonochemical method. Mater Lett 77:93–95
Bhuyan T, Mishra K, Khanuja M, Prasad R, Varma A (2015) Biosynthesis of zinc oxide nanoparticles from Azadirachta indica for antibacterial and photocatalytic applications. Mater Sci Semicond Process 32:55–61
Bilecka I, Niederberger M (2010) Microwave chemistry for inorganic nanomaterials synthesis. Nanoscale 2(8):1358–1374
Bilgin Simsek E, Kilic B, Asgin M, Akan A (2018) Graphene oxide based heterojunction TiO2–ZnO catalysts with outstanding photocatalytic performance for bisphenol-A, ibuprofen and flurbiprofen. J Ind Eng Chem 59:115–126. https://doi.org/10.1016/j.jiec.2017.10.014
Bora T, Sathe P, Laxman K, Dobretsov S, Dutta J (2017) Defect engineered visible light active ZnO nanorods for photocatalytic treatment of water. Catal Today 284:11–18
Bui VKH, Park D, Pham TN, An Y, Choi JS, Lee HU et al (2019) Synthesis of MgAC-Fe3O4/TiO2 hybrid nanocomposites via sol-gel chemistry for water treatment by photo-Fenton and photocatalytic reactions. Sci Rep 9(1):11855
Buxton HT, Kolpin DW (2005) Pharmaceuticals, hormones, and other organic wastewater contaminants in US streams. Water Encyclopedia 5:605–608
Cacace JE, Mazza G (2003) Mass transfer process during extraction of phenolic compounds from milled berries. J Food Eng 59(4):379–389. https://doi.org/10.1016/S0260-8774(02)00497-1
Cardoza-Contreras MN, Vasquez-Gallegos A, Vidal-Limon A, Romo-Herrera JM, Aguila S, Contreras OE (2019) Photocatalytic and Antimicrobial properties of Ga doped and Ag doped ZnO nanorods for water treatment. Catalysts 9(2). https://doi.org/10.3390/catal9020165
Cavalu S, Antoniac IV, Fritea L, Mates IM, Milea C, Laslo V et al (2018) Surface modifications of the titanium mesh for cranioplasty using selenium nanoparticles coating (article). J Adhes Sci Technol 32(22):2509–2522. https://doi.org/10.1080/01694243.2018.1490067
Chandrasekaran R, Gnanasekar S, Seetharaman P, Keppanan R, Arockiaswamy W, Sivaperumal S (2016) Formulation of Carica papaya latex-functionalized silver nanoparticles for its improved antibacterial and anticancer applications. J Mol Liq 219:232–238
Chen C, Liu P, Lu C (2008) Synthesis and characterization of nano-sized ZnO powders by direct precipitation method. Chem Eng J 144(3):509–513
Chen G, Wang Y, Shen Q, Song Y, Chen G, Yang H (2014) Synthesis and enhanced photocatalytic activity of 3D flowerlike ZnO microstructures on activated carbon fiber. Mater Lett 123:145–148. https://doi.org/10.1016/j.matlet.2014.03.029
Chen Y, Vymazal J, Březinová T, Koželuh M, Kule L, Huang J et al (2016) Occurrence, removal and environmental risk assessment of pharmaceuticals and personal care products in rural wastewater treatment wetlands. Sci Total Environ 566:1660–1669
Chen F, Yu C, Wei L, Fan Q, Ma F, Zeng J et al (2020) Fabrication and characterization of ZnTiO3/Zn2Ti3O8/ZnO ternary photocatalyst for synergetic removal of aqueous organic pollutants and Cr(VI) ions. Sci Total Environ 706:136026. https://doi.org/10.1016/j.scitotenv.2019.136026
Chen X, Xu X, Cui J, Chen C, Zhu X, Sun D et al (2020) Visible-light driven degradation of tetracycline hydrochloride and 2,4-dichlorophenol by film-like N-carbon@N-ZnO catalyst with three-dimensional interconnected nanofibrous structure. J Hazard Mater 392:122331. https://doi.org/10.1016/j.jhazmat.2020.122331
Cheng ZL, Sun W (2015) Preparation of N-doped ZnO-loaded halloysite nanotubes catalysts with high solar-light photocatalytic activity (Article). Water Sci Technol 72(10):1817–1823. https://doi.org/10.2166/wst.2015.403
Choina J, Bagabas A, Fischer C, Flechsig GU, Kosslick H, Alshammari A et al (2015) The influence of the textural properties of ZnO nanoparticles on adsorption and photocatalytic remediation of water from pharmaceuticals. Catal Today 241:47–54. https://doi.org/10.1016/j.cattod.2014.05.014
Chu J, Lu D, Ma J, Wang M, Wang X, Xiong S (2017) Controlled growth of MnO2 via a facile one-step hydrothermal method and their application in supercapacitors. Mater Lett 193:263–265
Constandache AC, Favier L, Covaliu L, Saulean AA, Predescu AM, Predescu C et al (2023) Morphological and structural investigations of ZnO resulted from green synthesis (article). Univ Politehnica Bucharest Sci Bullet Ser B-Chem Mater Sci 85(2):275–283
Dahoumane SA, Mechouet M, Wijesekera K, Filipe CD, Sicard C, Bazylinski DA et al (2017) Algae-mediated biosynthesis of inorganic nanomaterials as a promising route in nanobiotechnology–a review. Green Chem 19(3):552–587
Dauthal P, Mukhopadhyay M (2016) Noble metal nanoparticles: plant-mediated synthesis, mechanistic aspects of synthesis, and applications. Ind Eng Chem Res 55(36):9557–9577
Deblonde T, Cossu-Leguille C, Hartemann P (2011) Emerging pollutants in wastewater: a review of the literature. Int J Hyg Environ Health 214(6):442–448
Deebansok S, Amornsakchai T, Sae-ear P, Siriphannon P, Smith SM (2021) Sphere-like and flake-like ZnO immobilized on pineapple leaf fibers as easy-to-recover photocatalyst for the degradation of congo red. J Environ Chem Eng 9(2):104746
Dem’yanets LN, Li LE, Uvarova TG (2006) Zinc oxide: hydrothermal growth of nano- and bulk crystals and their luminescent properties (article; Proceedings Paper). J Mater Sci 41(5):1439–1444. https://doi.org/10.1007/s10853-006-7457-z
Deng Y, Zhao RZ (2015) Advanced oxidation processes (AOPs) in wastewater treatment (article). Curr Pollut Reports 1(3):167–176. https://doi.org/10.1007/s40726-015-0015-z
Duan H, Wang D, Li Y (2015) Green chemistry for nanoparticle synthesis. Chem Soc Rev 44(16):5778–5792
Dutta RK, Nenavathu BP, Gangishetty MK, Reddy A (2012) Studies on antibacterial activity of ZnO nanoparticles by ROS induced lipid peroxidation. Colloids Surf, B 94:143–150
Elmolla ES, Chaudhuri M (2010) Degradation of amoxicillin, ampicillin and cloxacillin antibiotics in aqueous solution by the UV/ZnO photocatalytic process. J Hazard Mater 173(1–3):445–449
Eskizeybek V, Sari F, Gulce H, Gulce A, Avci A (2012) Preparation of the new polyaniline/ZnO nanocomposite and its photocatalytic activity for degradation of methylene blue and malachite green dyes under UV and natural sun lights irradiations (Article). Appl Catal B-Environ 119:197–206. https://doi.org/10.1016/j.apcatb.2012.02.034
Farahmandfar R, Kenari RE, Asnaashari M, Shahrampour D, Bakhshandeh T (2019) Bioactive compounds, antioxidant and antimicrobial activities of Arum maculatum leaves extracts as affected by various solvents and extraction methods (Article). Food Sci Nutr 7(2):465–475. https://doi.org/10.1002/fsn3.815
Fatimah I, Wang S, Wulandari D (2011) ZnO/montmorillonite for photocatalytic and photochemical degradation of methylene blue. Appl Clay Sci 53(4):553–560
Feng L, van Hullebusch ED, Rodrigo MA, Esposito G, Oturan MA (2013) Removal of residual anti-inflammatory and analgesic pharmaceuticals from aqueous systems by electrochemical advanced oxidation processes. Rev Chem Eng J 228:944–964
Feng G, Huang H, Chen Y (2021) Effects of emerging pollutants on the occurrence and transfer of antibiotic resistance genes: a review. J Hazard Mater 420:126602
Flores-Carrasco G, Mora J, Ramírez R, Bueno C, Alcántara-Iniesta S, Soto B et al 286 (2019) ‘Morpho-structural and chemical composition properties of PVP-capped ZnO nanoparticles synthesized via a simple-polyol method’ Solid State Phenomena. Trans Tech Publ, pp 15–22
Folarin OS, Otitoloju AA, Amaeze NH, Saliu JK (2019) Occurrence of acetaminophen, amoxicillin, diclofenac and methylparaben in Lagos and Ologe Lagoons, Lagos, Nigeria (article). J Appl Sci Environ Manag 23(12):2143–2149. https://doi.org/10.4314/jasem.v23i12.10
Folawewo ADD, Bala MDD (2022) Nanocomposite zinc oxide-based photocatalysts: recent developments in their use for the treatment of dye-polluted wastewater (review). Water 14(23). https://doi.org/10.3390/w14233899
Fountain MT, Medd N (2015) Integrating pesticides and predatory mites in soft fruit crops (Article). Phytoparasitica 43(5):657–667. https://doi.org/10.1007/s12600-015-0485-y
Gajendiran J, Rajendran V (2014) Synthesis and characterization of coupled semiconductor metal oxide (ZnO/CuO) nanocomposite. Mater Lett 116:311–313
Gao Y, Wang L, Zhou A, Li Z, Chen J, Bala H et al (2015) Hydrothermal synthesis of TiO2/Ti3C2 nanocomposites with enhanced photocatalytic activity. Mater Lett 150:62–64
Garanin DA, Kachkachi H (2003) Surface contribution to the anisotropy of magnetic nanoparticles. Phys Rev Lett 90(6):065504. https://doi.org/10.1103/PhysRevLett.90.065504
Georgiev V, Ananga A, Tsolova V (2014) Recent advances and uses of grape flavonoids as nutraceuticals. Nutrients 6(1):391–415
Gerbreders V, Krasovska M, Sledevskis E, Gerbreders A, Mihailova I, Tamanis E et al (2020) Hydrothermal synthesis of ZnO nanostructures with controllable morphology change. CrystEngComm 22(8):1346–1358
Ghaffar S, Abbas A, Naeem-ul-Hassan M, Assad N, Sher M, Ullah S et al (2023) Improved photocatalytic and antioxidant activity of olive fruit extract-mediated ZnO nanoparticles. Antioxidants 12(6). https://doi.org/10.3390/antiox12061201
Ghosh S, Majumder D, Sen A, Roy S (2014) Facile sonochemical synthesis of zinc oxide nanoflakes at room temperature. Mater Lett 130:215–217
Gombac V, De Rogatis L, Gasparotto A, Vicario G, Montini T, Barreca D et al (2007) TiO2 nanopowders doped with boron and nitrogen for photocatalytic applications. Chem Phys 339(1–3):111–123
Guo F, Shi W, Guan W, Huang H, Liu Y (2017) Carbon dots/g-C3N4/ZnO nanocomposite as efficient visible-light driven photocatalyst for tetracycline total degradation. Sep Purif Technol 173:295–303. https://doi.org/10.1016/j.seppur.2016.09.040
Gusain R, Gupta K, Joshi P, Khatri OP (2019) Adsorptive removal and photocatalytic degradation of organic pollutants using metal oxides and their composites: a comprehensive review (Review). Adv Coll Interface Sci 272:23. https://doi.org/10.1016/j.cis.2019.102009
Hadjltaief HB, Ameur SB, Da Costa P, Zina MB, Galvez ME (2018) Photocatalytic decolorization of cationic and anionic dyes over ZnO nanoparticle immobilized on natural Tunisian clay. Appl Clay Sci 152:148–157
Halaciuga I, LaPlante S, Goia DV (2011) Precipitation of dispersed silver particles using acetone as reducing agent. J Colloid Interface Sci 354(2):620–623
Hasija V, Sudhaik A, Raizada P, Hosseini-Bandegharaei A, Singh P (2019) Carbon quantum dots supported AgI /ZnO/phosphorus doped graphitic carbon nitride as Z-scheme photocatalyst for efficient photodegradation of 2, 4-dinitrophenol (Article). J Environ Chem Eng 7(4):12. https://doi.org/10.1016/j.jece.2019.103272
Heidari Z, Alizadeh R, Ebadi A, Oturan N, Oturan MA (2020) Efficient photocatalytic degradation of furosemide by a novel sonoprecipited ZnO over ion exchanged clinoptilolite nanorods. Sep Purif Technol 242:116800
Heinlaan M, Ivask A, Blinova I, Dubourguier H-C, Kahru A (2008) Toxicity of nanosized and bulk ZnO, CuO and TiO2 to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus. Chemosphere 71(7):1308–1316
Hodaei A, Ataie A, Mostafavi E (2015) Intermediate milling energy optimization to enhance the characteristics of barium hexaferrite magnetic nanoparticles (Article). J Alloy Compd 640:162–168. https://doi.org/10.1016/j.jallcom.2015.03.230
Hou Y-F, Liu S-J, Zhang J-H, Cheng X, Wang Y (2014) Facile hydrothermal synthesis of TiO 2–Bi 2 WO 6 hollow superstructures with excellent photocatalysis and recycle properties. Dalton Trans 43(3):1025–1031
Hu Y, Zhu Y, Zhang Y, Lin T, Zeng G, Zhang S et al (2019) An efficient adsorbent: Simultaneous activated and magnetic ZnO doped biochar derived from camphor leaves for ciprofloxacin adsorption. Biores Technol 288:121511
Hussein BY, Mohammed AM (2021) Green synthesis of ZnO nanoparticles in grape extract: their application as anti-cancer and anti-bacterial. Mater Today: Proc 42:A18–A26
Iravani S (2014) Bacteria in nanoparticle synthesis: current status and future prospects. Int Sch Res Not 2014(1–18):59316
Islam F, Shohag S, Uddin MJ, Islam MR, Nafady MH, Akter A et al (2022) Exploring the journey of zinc oxide nanoparticles (ZnO-NPs) toward biomedical applications (article). Materials 15(6):31. https://doi.org/10.3390/ma15062160
Ismail AA, El-Midany A, Abdel-Aal EA, El-Shall H (2005) Application of statistical design to optimize the preparation of ZnO nanoparticles via hydrothermal technique (article). Mater Lett 59(14–15):1924–1928. https://doi.org/10.1016/j.matlet.2005.02.027
Jafarirad S, Mehrabi M, Divband B, Kosari-Nasab M (2016) Biofabrication of zinc oxide nanoparticles using fruit extract of Rosa canina and their toxic potential against bacteria: a mechanistic approach. Mater Sci Eng, C 59:296–302
Jaidev LR, Narasimha G (2010) Fungal mediated biosynthesis of silver nanoparticles, characterization and antimicrobial activity (Article). Colloids Surf B-Biointerfaces 81(2):430–433. https://doi.org/10.1016/j.colsurfb.2010.07.033
Jamdagni P, Khatri P, Rana J (2018) Green synthesis of zinc oxide nanoparticles using flower extract of Nyctanthes arbor-tristis and their antifungal activity. J King Saud Univ-Sci 30(2):168–175
James O, Anyakora C, Tolulope B, Tella A (2014) Determination of pharmaceutical compounds in surface and underground water by solid phase extraction-liquid chromatography. J Environ Chem Ecotoxicol 6:20–26. https://doi.org/10.5897/JECE2013.0312
Jamjoum HAA, Umar K, Adnan R, Razali MR, Mohamad Ibrahim MN (2021) Synthesis, characterization, and photocatalytic activities of graphene oxide/metal oxides nanocomposites: a review. Front Chem 9:752276
Jayaseelan C, Rahuman AA, Kirthi AV, Marimuthu S, Santhoshkumar T, Bagavan A et al (2012) Novel microbial route to synthesize ZnO nanoparticles using Aeromonas hydrophila and their activity against pathogenic bacteria and fungi. Spectrochim Acta Part A Mol Biomol Spectrosc 90:78–84
Jha AK, Prasad K (2008) Yeast mediated synthesis of silver nanoparticles. Int J Nanosci Nanotechnol 4(1):17–22
Jiang GH, Li X, Wei Z, Jiang TT, Du XX, Chen WX (2014) Growth of N-doped BiOBr nanosheets on carbon fibers for photocatalytic degradation of organic pollutants under visible light irradiation (Article). Powder Technol 260:84–89. https://doi.org/10.1016/j.powtec.2014.04.005
Jin C, Li J, Wang J, Han S, Wang Z, Sun Q (2014) Cross-linked ZnO nanowalls immobilized onto bamboo surface and their use as recyclable photocatalysts. J Nanomater 2014:3–3
Junaid M, Wang Y, Hamid N, Deng S, Li WG, Pei DS (2019) Prioritizing selected PPCPs on the basis of environmental and toxicogenetic concerns: a toxicity estimation to confirmation approach (article). J Hazard Mater 380:12. https://doi.org/10.1016/j.jhazmat.2019.120828
Jung S, Yong K (2011) Fabrication of CuO–ZnO nanowires on a stainless steel mesh for highly efficient photocatalytic applications. Chem Commun 47(9):2643–2645
Kalpana VN, Kataru BAS, Sravani N, Vigneshwari T, Panneerselvam A, Devi Rajeswari V (2018) Biosynthesis of zinc oxide nanoparticles using culture filtrates of Aspergillus niger: antimicrobial textiles and dye degradation studies. OpenNano 3:48–55. https://doi.org/10.1016/j.onano.2018.06.001
Karimi Shamsabadi M, Behpour M (2021) Fabricated CuO–ZnO/nanozeolite X heterostructure with enhanced photocatalytic performance: mechanism investigation and degradation pathway. Mater Sci Eng, B 269:115170. https://doi.org/10.1016/j.mseb.2021.115170
Kaur A, Gupta G, Ibhadon AO, Salunke DB, Sinha ASK, Kansal SK (2018) A Facile synthesis of silver modified ZnO nanoplates for efficient removal of ofloxacin drug in aqueous phase under solar irradiation (article). J Environ Chem Eng 6(3):3621–3630. https://doi.org/10.1016/j.jece.2017.05.032
Kaur A, Mehta VS, Kaur G, Sud D (2023) Biopolymer templated strategized greener protocols for fabrication of ZnO nanostructures and their application in photocatalytic technology for phasing out priority pollutants. Environ Sci Pollut Res 30(10):25663–25681. https://doi.org/10.1007/s11356-023-25234-y
Khan SA, Aslam R, Makroo HA (2019) High pressure extraction and its application in the extraction of bio-active compounds: a review (Review). J Food Process Eng 42(1):15. https://doi.org/10.1111/jfpe.12896
Khataee A, Kıranşan M, Karaca S, Sheydaei M (2017) Photocatalytic ozonation of metronidazole by synthesized zinc oxide nanoparticles immobilized on montmorillonite. J Taiwan Inst Chem Eng 74:196–204
Khavar AHC, Moussavi G, Mahjoub A, Yaghmaeian K, Srivastava V, Sillanpaa M et al (2019) Novel magnetic Fe3O4@rGO@ZnO onion-like microspheres decorated with Ag nanoparticles for the efficient photocatalytic oxidation of metformin: toxicity evaluation and insights into the mechanisms (Article). Catal Sci Technol 9(20):5819–5837. https://doi.org/10.1039/c9cy01381d
Khosravi-Darani K, Gomes da Cruz A, Shamloo E, Abdimoghaddam Z, Mozafari M (2019) Green synthesis of metallic nanoparticles using algae and microalgae. Lett Appl NanoBioSci 8(3):666–670
Kıranşan M, Khataee A, Karaca S, Sheydaei M (2015) Artificial neural network modeling of photocatalytic removal of a disperse dye using synthesized of ZnO nanoparticles on montmorillonite. Spectrochim Acta Part A Mol Biomol Spectrosc 140:465–473. https://doi.org/10.1016/j.saa.2014.12.100
Kokkinos P, Venieri D, Mantzavinos D (2021) Advanced oxidation processes for water and wastewater viral disinfection. a systematic review (review). Food Environ Virol 13(3):283–302. https://doi.org/10.1007/s12560-021-09481-1
Kolodziejczak-Radzimska A, Jesionowski T (2014) Zinc oxide-from synthesis to application: a review (review). Materials 7(4):2833–2881. https://doi.org/10.3390/ma7042833
Konstantinou IK, Albanis TA (2004) TiO2-assisted photocatalytic degradation of azo dyes in aqueous solution: kinetic and mechanistic investigations - a review (review). Appl Catal B-Environ 49(1):1–14. https://doi.org/10.1016/j.apcatb.2003.11.010
Kosma CI, Lambropoulou DA, Albanis TA (2010) Occurrence and removal of PPCPs in municipal and hospital wastewaters in Greece. J Hazard Mater 179(1–3):804–817
Kumar DS, Kumar BJ, Mahesh H (2018a) Chapter 3: Quantum nanostructures (QDs): an overview. In Micro and Nano Technologies, Synthesis of Inorganic Nanomaterials. Woodhead Publishing, p 59–88
Kumar S, Dhiman A, Sudhagar P, Krishnan V (2018b) ZnO-graphene quantum dots heterojunctions for natural sunlight-driven photocatalytic environmental remediation. Appl Surf Sci 447:802–815. https://doi.org/10.1016/j.apsusc.2018.04.045
Kumar S, Kaushik R, Purohit L (2022) ZnO-CdO nanocomposites incorporated with graphene oxide nanosheets for efficient photocatalytic degradation of bisphenol A, thymol blue and ciprofloxacin. J Hazard Mater 424:127332
Kumaresan N, Ramamurthi K, Babu RR, Sethuraman K, Babu SM (2017) Hydrothermally grown ZnO nanoparticles for effective photocatalytic activity. Appl Surf Sci 418:138–146
Kundu D, Hazra C, Chatterjee A, Chaudhari A, Mishra S (2014) Extracellular biosynthesis of zinc oxide nanoparticles using Rhodococcus pyridinivorans NT2: multifunctional textile finishing, biosafety evaluation and in vitro drug delivery in colon carcinoma (Article). J Photochem Photobiol B-Biol 140:194–204. https://doi.org/10.1016/j.jphotobiol.2014.08.001
Kunjara Na Ayudhya S, Tonto P, Mekasuwandumrong O, Pavarajarn V, Praserthdam P (2006) Solvothermal synthesis of ZnO with various aspect ratios using organic solvents. Crystal Growth Des 6(11):2446–2450
Lavand AB, Malghe YS (2015) Synthesis, characterization and visible light photocatalytic activity of nitrogen-doped zinc oxide nanospheres. J Asian Ceramic Soc 3(3):305–310
Lavand AB, Malghe YS (2015) Visible light photocatalytic degradation of 4-chlorophenol using C/ZnO/CdS nanocomposite. J Saudi Chem Soc 19(5):471–478. https://doi.org/10.1016/j.jscs.2015.07.001
Le AT, Duy HLT, Cheong K-Y, Pung S-Y (2022) Immobilization of zinc oxide-based photocatalysts for organic pollutant degradation: a review. J Environ Chem Eng 10(5):108505. https://doi.org/10.1016/j.jece.2022.108505
Lee S, Jeong S, Kim D, Hwang S, Jeon M, Moon J (2008) ZnO nanoparticles with controlled shapes and sizes prepared using a simple polyol synthesis. Superlattices Microstruct 43(4):330–339
Leung HW, Minh T, Murphy MB, Lam JC, So MK, Martin M et al (2012) Distribution, fate and risk assessment of antibiotics in sewage treatment plants in Hong Kong, South China. Environ Int 42:1–9
Li XC, He GH, Xiao GK, Liu HJ, Wang M (2009) Synthesis and morphology control of ZnO nanostructures in microemulsions (article). J Colloid Interface Sci 333(2):465–473. https://doi.org/10.1016/j.jcis.2009.02.029
Li J, Liu K, Xue J, Xue G, Sheng X, Wang H et al (2019) CQDS preluded carbon-incorporated 3D burger-like hybrid ZnO enhanced visible-light-driven photocatalytic activity and mechanism implication. J Catal 369:450–461. https://doi.org/10.1016/j.jcat.2018.11.026
Lin J, Luo Z, Liu J, Li P (2018) Photocatalytic degradation of methylene blue in aqueous solution by using ZnO-SnO2 nanocomposites. Mater Sci Semicond Process 87:24–31. https://doi.org/10.1016/j.mssp.2018.07.003
Liu J-L, Wong M-H (2013) Pharmaceuticals and personal care products (PPCPs): a review on environmental contamination in China. Environ Int 59:208–224
Liu B, Zeng HC (2003) Hydrothermal synthesis of ZnO nanorods in the diameter regime of 50 nm. J Am Chem Soc 125(15):4430–4431
Liu C-F, Lu Y-J, Hu C-C (2018) Effects of anions and pH on the stability of ZnO nanorods for photoelectrochemical water splitting. ACS Omega 3(3):3429–3439
Liu C, Li X, Li J, Sun L, Zhou Y, Guan J et al (2019) Carbon dots modifying sphere-flower CdIn2S4 on N-rGO sheet muti-dimensional photocatalyst for efficient visible degradation of 2,4-dichlorophenol. J Taiwan Inst Chem Eng 99:142–153. https://doi.org/10.1016/j.jtice.2019.03.015
Liu N, Jin XW, Feng CL, Wang ZJ, Wu FC, Johnson AC et al (2020) Ecological risk assessment of fifty pharmaceuticals and personal care products (PPCPs) in Chinese surface waters: a proposed multiple-level system (article). Environ Int 136:11. https://doi.org/10.1016/j.envint.2019.105454
Liu D, Song J, Chung JS, Hur SH, Choi WM (2022) ZnO/boron nitride quantum dots nanocomposites for the enhanced photocatalytic degradation of methylene blue and methyl orange. Molecules 27(20). https://doi.org/10.3390/molecules27206833
Lu F, Cai W, Zhang Y (2008) ZnO hierarchical micro/nanoarchitectures: solvothermal synthesis and structurally enhanced photocatalytic performance. Adv Func Mater 18(7):1047–1056
Lutterbeck CA, Colares GS, Dell’Osbel N, da Silva FP, Kist LT, Machado ÊL (2020) Hospital laundry wastewaters: a review on treatment alternatives, life cycle assessment and prognosis scenarios. J Clean Prod 273:122851
Ma H, Han J, Fu Y, Song Y, Yu C, Dong X (2011) Synthesis of visible light responsive ZnO–ZnS/C photocatalyst by simple carbothermal reduction. Appl Catal B 102(3):417–423. https://doi.org/10.1016/j.apcatb.2010.12.014
Madikizela LM, Ncube S, Chimuka L (2020) Analysis, occurrence and removal of pharmaceuticals in African water resources: a current status (Review). J Environ Manage 253:11. https://doi.org/10.1016/j.jenvman.2019.109741
Magesh G, Bhoopathi G, Arun A, Kumar ER, Srinivas C, Sathiyaraj S (2018) Study of structural, morphological, optical and biomedical properties of pH based ZnO nanostructures. Superlattices Microstruct 124:41–51
Mahajan BK, Kumar N, Chauhan R, Srivastava VC, Gulati S (2019) Mechanistic evaluation of heterocyclic aromatic compounds mineralization by a Cu doped ZnO photo-catalyst. Photochem Photobiol Sci 18:1540–1555
Mahdizadeh F, Aber S, Karimi A (2015) Synthesis of nano zinc oxide on granular porous scoria: application for photocatalytic removal of pharmaceutical and textile pollutants from synthetic and real wastewaters. J Taiwan Inst Chem Eng 49:212–219
Makama AB, Salmiaton A, Choong TSY, Hamid MRA, Abdullah N, Saion E (2020) Influence of parameters and radical scavengers on the visible-light-induced degradation of ciprofloxacin in ZnO/SnS2 nanocomposite suspension: identification of transformation products. Chemosphere 253:126689. https://doi.org/10.1016/j.chemosphere.2020.126689
Malakootian M, Gharaghani MA, Dehdarirad A, Khatami M, Ahmadian M, Heidari MR et al (2019) ZnO nanoparticles immobilized on the surface of stones to study the removal efficiency of 4-nitroaniline by the hybrid advanced oxidation process (UV/ZnO/O3). J Mol Struct 1176:766–776
Malakootian M, Mahdizadeh H, Dehdarirad A, Amiri Gharghani M (2019) Photocatalytic ozonation degradation of ciprofloxacin using ZnO nanoparticles immobilized on the surface of stones. J Dispersion Sci Technol 40(6):846–854
Malakootian M, Khatami M, Mandizadeh H, Nasiri A, Gharaghani MA (2020) A study on the photocatalytic degradation of p-Nitroaniline on glass plates by thermo-immobilized ZnO nanoparticle (article). Inorg Nano-Metal Chem 50(3):124–135. https://doi.org/10.1080/24701556.2019.1662807
Marciello M, Luengo Y, Morales MP (2016) Iron oxide nanoparticles for cancer diagnosis and therapy. In: A. M. Holban, & A. M. Grumezescu (Eds.), Nanoarchitectonics for smart delivery and drug targeting (pp. 667–694). Norwich: William Andrew Inc. https://doi.org/10.1016/b978-0-323-47347-7.00024-0
Massaro M, Casiello M, D’Accolti L, Lazzara G, Nacci A, Nicotra G et al (2020) One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications. Appl Clay Sci 189:105527
Matongo S, Birungi G, Moodley B, Ndungu P (2015) Pharmaceutical residues in water and sediment of Msunduzi River, KwaZulu-Natal, South Africa (Article). Chemosphere 134:133–140. https://doi.org/10.1016/j.chemosphere.2015.03.093
Maximize Market Research. https://www.maximizemarketresearch.com/?s=Global+Nanotechnology+in+Water+Treatment. Accessed 20.02.2023 2023
Medina-Ramírez I, Hernández-Ramírez A, Maya-Trevino ML (2015) Chapter: Synthesis methods for photocatalytic materials in Photocatalytic Semiconductors: Synthesis. Charact Environ Appl. Springer Cham 69–102
Mehta SK, Kumar S, Chaudhary S, Bhasin KK (2009) Effect of cationic surfactant head groups on synthesis, growth and agglomeration behavior of ZnS nanoparticles (article). Nanoscale Res Lett 4(10):1197–1208. https://doi.org/10.1007/s11671-009-9377-8
Mei A, Xu Z, Wang X, Liu Y, Chen J, Fan J et al (2022) Photocatalytic materials modified with carbon quantum dots for the degradation of organic pollutants under visible light: a review. Environ Res 214(Pt 4):114160. https://doi.org/10.1016/j.envres.2022.114160
Melinte V, Stroea L, Chibac-Scutaru AL (2019) Polymer nanocomposites for photocatalytic applications. Catalysts 9(12). https://doi.org/10.3390/catal9120986
Merlano AS, Albiter E, Valenzuela MA, Hoyos LM, Salazar A (2022) Flower-like and nanorods ZnO deposited on rGO as efficient photocatalysts for removal of polychlorinated biphenyls (PCBs). Nanocomposites 8(1):204–214. https://doi.org/10.1080/20550324.2023.2168938
Mintcheva N, Aljulaih AA, Wunderlich W, Kulinich SA, Iwamori S (2018) Laser-ablated ZnO nanoparticles and their photocatalytic activity toward organic pollutants (article). Materials 11(7):11. https://doi.org/10.3390/ma11071127
Mirzaei H, Darroudi M (2017) Zinc oxide nanoparticles: biological synthesis and biomedical applications. Ceram Int 43(1):907–914
Modan M, Schiopu A-G (2020) Advantages and disadvantages of chemical methods in the elaboration of nanomaterials. 43. https://doi.org/10.35219/mms.2020.1.08
Mohanta D, Ahmaruzzaman M (2021) Au–SnO2–CdS ternary nanoheterojunction composite for enhanced visible light-induced photodegradation of imidacloprid. Environ Res 201:111586
Moradi H, Sharifnia S, Rahimpour F (2015) Photocatalytic decolorization of reactive yellow 84 from aqueous solutions using ZnO nanoparticles supported on mineral LECA. Mater Chem Phys 158:38–44. https://doi.org/10.1016/j.matchemphys.2015.03.031
Mostafavi E, Babaei A, Ataie A (2015) Synthesis of nano-structured La0.6Sr0.4Co0.2Fe0.8O3 perovskite by co-precipitation method. J Ultrafine Grained Nanostruct Mater 48:45–52. https://doi.org/10.7508/jufgnsm.2015.01.007
Muduli S, Game O, Dhas V, Yengantiwar A, Ogale SB (2011) Shape preserving chemical transformation of ZnO mesostructures into anatase TiO 2 mesostructures for optoelectronic applications. Energy Environ Sci 4(8):2835–2839
Mukherjee P, Ahmad A, Mandal D, Senapati S, Sainkar SR, Khan MI et al (2001) Fungus-mediated synthesis of silver nanoparticles and their immobilization in the mycelial matrix: a novel biological approach to nanoparticle synthesis. Nano Lett 1(10):515–519
Munawar T, Yasmeen S, Hasan M, Mahmood K, Hussain A, Ali A et al (2020) Novel tri-phase heterostructured ZnO–Yb2O3–Pr2O3 nanocomposite; structural, optical, photocatalytic and antibacterial studies. Ceram Int 46(8, Part A):11101–11114. https://doi.org/10.1016/j.ceramint.2020.01.130
Muruganandham M, Swaminathan M (2006) TiO2-UV photocatalytic oxidation of Reactive Yellow 14: effect of operational parameters (article). J Hazard Mater 135(1–3):78–86. https://doi.org/10.1016/j.jhazmat.2005.11.022
Muthulingam S, Lee I-H, Uthirakumar P (2015) Highly efficient degradation of dyes by carbon quantum dots/N-doped zinc oxide (CQD/N-ZnO) photocatalyst and its compatibility on three different commercial dyes under daylight. J Colloid Interface Sci 455:101–109. https://doi.org/10.1016/j.jcis.2015.05.046
Nandi P, Das D (2020) ZnO-CuxO heterostructure photocatalyst for efficient dye degradation. J Phys Chem Solids 143:109463
Naser SS, Ghosh B, Simnani FZ, Singh D, Choudhury A, Nandi A et al (2023) Emerging trends in the application of green synthesized biocompatible ZnO nanoparticles for translational paradigm in cancer therapy. J Nanotheranostics 4(3):248–279. https://doi.org/10.3390/jnt4030012
Naskar A, Lee S, Kim KS (2020) Antibacterial potential of Ni-doped zinc oxide nanostructure: comparatively more effective against Gram-negative bacteria including multi-drug resistant strains (article). RSC Adv 10(3):1232–1242. https://doi.org/10.1039/c9ra09512h
Navas D, Fuentes S, Castro-Alvarez A, Chavez-Angel E (2021) Review on sol-gel synthesis of perovskite and oxide nanomaterials (article). Gels 7(4):19. https://doi.org/10.3390/gels7040275
Nicolay A, Lanzutti A, Poelman M, Ruelle B, Fedrizzi L, Dubois P et al (2015) Elaboration and characterization of a multifunctional silane/ZnO hybrid nanocomposite coating (article). Appl Surf Sci 327:379–388. https://doi.org/10.1016/j.apsusc.2014.11.161
Noguera-Oviedo K, Aga DS (2016) Lessons learned from more than two decades of research on emerging contaminants in the environment. J Hazard Mater 316:242–251
Noreen S, Zafar S, Bibi I, Amami M, Raza MAS, Alshammari FH et al (2022) ZnO, Al/ZnO and W/Ag/ZnO nanocomposite and their comparative photocatalytic and adsorptive removal for Turquoise Blue Dye. Ceram Int 48(9):12170–12183. https://doi.org/10.1016/j.ceramint.2022.01.078
Nur H, Misnon II, Wei LK (2007) Stannic oxide-titanium dioxide coupled semiconductor photocatalyst loaded with polyaniline for enhanced photocatalytic oxidation of 1-octene. Int J Photoenergy 2007
Ochieng P, Iwuoha E, Michira I, Masikini M, Ondiek J, Githira P et al (2015) Green route synthesis and characterization of ZnO nanoparticles using Spathodea campanulata. Int J Biochem Phys 23:53–61
Okoya AA, Ogunfowokan AO, Asubiojo OI, Torto N (2013) Organochlorine pesticide residues in sediments and waters from cocoa producing areas of Ondo State, Southwestern Nigeria. ISRN Soil Sci 2013:131647. https://doi.org/10.1155/2013/131647
Oliveira TS, Murphy M, Mendola N, Wong V, Carlson D, Waring L (2015) Characterization of pharmaceuticals and personal care products in hospital effluent and waste water influent/effluent by direct-injection LC-MS-MS. Sci Total Environ 518:459–478
Organization WH, WHO (2004) Guidelines for drinking-water quality. World Health Organization
Osuoha JO, Anyanwu BO, Ejileugha C (2023) Pharmaceuticals and personal care products as emerging contaminants: need for combined treatment strategy (article). J Hazard Mater Adv 9:15. https://doi.org/10.1016/j.hazadv.2022.100206
Outokesh M, Hosseinpour M, Ahmadi S, Mousavand T, Sadjadi S, Soltanian W (2011) Hydrothermal synthesis of CuO nanoparticles: study on effects of operational conditions on yield, purity, and size of the nanoparticles. Ind Eng Chem Res 50(6):3540–3554
Palmatier RW, Houston MB, Hulland J 46 (2018) ‘Review articles: purpose, process, and structure’. Springer, pp 1–5
Pant B, Pant HR, Barakat NAM, Park M, Jeon K, Choi Y et al (2013) Carbon nanofibers decorated with binary semiconductor (TiO2/ZnO) nanocomposites for the effective removal of organic pollutants and the enhancement of antibacterial activities. Ceram Int 39(6):7029–7035. https://doi.org/10.1016/j.ceramint.2013.02.041
Parida VK, Saidulu D, Majumder A, Srivastava A, Gupta B, Gupta AK (2021) Emerging contaminants in wastewater: a critical review on occurrence, existing legislations, risk assessment, and sustainable treatment alternatives. J Environ Chem Eng 9(5):105966
Patehkhor HA, Fattahi M, Khosravi-Nikou M (2021) Synthesis and characterization of ternary chitosan-TiO2-ZnO over graphene for photocatalytic degradation of tetracycline from pharmaceutical wastewater (Article). Sci Rep 11(1):17. https://doi.org/10.1038/s41598-021-03492-5
Patel V, Berthold D, Puranik P, Gantar M (2015) Screening of cyanobacteria and microalgae for their ability to synthesize silver nanoparticles with antibacterial activity. Biotechnol Reports 5:112–119
Pati, R., Mehta, R. K., Mohanty, S., Padhi, A., Sengupta, M., Vaseeharan, B., et al. (2014). Topical application of zinc oxide nanoparticles reduces bacterial skin infection in mice and exhibits antibacterial activity by inducing oxidative stress response and cell membrane disintegration in macrophages. Nanomedicine: Nanotechnology, Biology and Medicine, 10(6), 1195–1208.
Paucar NE, Kim I, Tanaka H, Sato C (2019) Ozone treatment process for the removal of pharmaceuticals and personal care products in wastewater (Article). Ozone-Sci Eng 41(1):3–16. https://doi.org/10.1080/01919512.2018.1482456
Paulkumar, K., Gnanajobitha, G., Vanaja, M., Rajeshkumar, S., Malarkodi, C., Pandian, K., et al. (2014). Piper nigrum leaf and stem assisted green synthesis of silver nanoparticles and evaluation of its antibacterial activity against agricultural plant pathogens. The Scientific World Journal, 2014.
Peng H, Liu X, Tang W, Ma R (2017) Facile synthesis and characterization of ZnO nanoparticles grown on halloysite nanotubes for enhanced photocatalytic properties. Sci Rep 7(1):2250. https://doi.org/10.1038/s41598-017-02501-w
Peter CN, Anku WW, Sharma R, Joshi GM, Shukla SK, Govender PP (2019) N-doped ZnO/graphene oxide: a photostable photocatalyst for improved mineralization and photodegradation of organic dye under visible light (Article). Ionics 25(1):327–339. https://doi.org/10.1007/s11581-018-2571-x
Phuruangrat A, Siri S, Wadbua P, Thongtem S, Thongtem T (2019) Microwave-assisted synthesis, photocatalysis and antibacterial activity of Ag nanoparticles supported on ZnO flowers. J Phys Chem Solids 126:170–177. https://doi.org/10.1016/j.jpcs.2018.11.007
Piras CC, Fernandez-Prieto S, De Borggraeve WM (2019) Ball milling: a green technology for the preparation and functionalisation of nanocellulose derivatives (Review). Nanoscale Adv 1(3):937–947. https://doi.org/10.1039/c8na00238j
Podasca VE, Buruiana T, Buruiana EC (2016) UV-cured polymeric films containing ZnO and silver nanoparticles with UV-vis light-assisted photocatalytic activity (Article). Appl Surf Sci 377:262–273. https://doi.org/10.1016/j.apsusc.2016.03.178
Post GB (2021) Recent US state and federal drinking water guidelines for per-and polyfluoroalkyl substances. Environ Toxicol Chem 40(3):550–563
Poulios I, Avranas A, Rekliti E, Zouboulis A (2000) Photocatalytic oxidation of Auramine O in the presence of semiconducting oxides (article). J Chem Technol Biotechnol 75(3):205–212. https://doi.org/10.1002/(sici)1097-4660(200003)75:3%3c205::aid-jctb201%3e3.0.co;2-l
Prabhu S, Megala S, Harish S, Navaneethan M, Maadeswaran P, Sohila S et al (2019) Enhanced photocatalytic activities of ZnO dumbbell/reduced graphene oxide nanocomposites for degradation of organic pollutants via efficient charge separation pathway. Appl Surf Sci 487:1279–1288. https://doi.org/10.1016/j.apsusc.2019.05.086
Prakash A, Sharma S, Ahmad N, Ghosh A, Sinha P (2010) Bacteria mediated extracellular synthesis of metallic nanoparticles. Int Res J Biotechnol 1(5):071–079
Prasad AR, Williams L, Garvasis J, Shamsheera K, Basheer SM, Kuruvilla M et al (2021) Applications of phytogenic ZnO nanoparticles: a review on recent advancements. J Mol Liq 331:115805
Prathap MA, Kaur B, Srivastava R (2012) Hydrothermal synthesis of CuO micro-/nanostructures and their applications in the oxidative degradation of methylene blue and non-enzymatic sensing of glucose/H2O2. J Colloid Interface Sci 370(1):144–154
Prommalikit C, Mekprasart W, Pecharapa W (2019) Effect of milling speed and time on ultrafine ZnO powder by high energy ball milling technique. J Phys: Conf Ser 1259:012023. https://doi.org/10.1088/1742-6596/1259/1/012023
Pruden A, Pei R, Storteboom H, Carlson KH (2006) Antibiotic resistance genes as emerging contaminants: studies in northern Colorado. Environ Sci Technol 40(23):7445–7450
Purwaningsih SY, Pratapa S, Triwikantoro T, Darminto D (2016) Synthesis of nano-sized ZnO particles by co-precipitation method with variation of heating time. AIP Conference Proceedings, vol 1710
Qi K, Cheng B, Yu J, Ho W (2017) Review on the improvement of the photocatalytic and antibacterial activities of ZnO. J Alloy Compd 727:792–820. https://doi.org/10.1016/j.jallcom.2017.08.142
Qin RH, Hao LY, Liu Y, Zhang YL (2018) Polyaniline-ZnO hybrid nanocomposites with enhanced photocatalytic and electrochemical performance (article). ChemistrySelect 3(23):6286–6293. https://doi.org/10.1002/slct.201800246
Qu J, Luo C, Hou J (2011) Synthesis of ZnO nanoparticles from Zn-hyperaccumulator (Sedum alfredii Hance) plants. Micro Nano Lett 6(3):174–176
Qu J, Yuan X, Wang X, Shao P (2011) Zinc accumulation and synthesis of ZnO nanoparticles using Physalis alkekengi L. Environ Pollut 159(7):1783–1788
Qu Y, Xu X, Huang R, Qi W, Su R, He Z (2020) Enhanced photocatalytic degradation of antibiotics in water over functionalized N, S-doped carbon quantum dots embedded ZnO nanoflowers under sunlight irradiation. Chem Eng J 382:123016
Raha S, Ahmaruzzaman M (2020) Enhanced performance of a novel superparamagnetic g-C3N4/NiO/ZnO/Fe3O4 nanohybrid photocatalyst for removal of esomeprazole: effects of reaction parameters, co-existing substances and water matrices. Chem Eng J 395:124969. https://doi.org/10.1016/j.cej.2020.124969
Raizada P, Singh P, Kumar A, Sharma G, Pare B, Jonnalagadda SB et al (2014) Solar photocatalytic activity of nano-ZnO supported on activated carbon or brick grain particles: role of adsorption in dye degradation. Appl Catal A 486:159–169. https://doi.org/10.1016/j.apcata.2014.08.043
Rajeshkumar S, Malarkodi C, Paulkumar K, Vanaja M, Gnanajobitha G, Annadurai G (2014) Algae mediated green fabrication of silver nanoparticles and examination of its antifungal activity against clinical pathogens. Int J Metals 2014:1–8
Raliya R, Tarafdar JC (2013) ZnO nanoparticle biosynthesis and its effect on phosphorous-mobilizing enzyme secretion and gum contents in clusterbean (Cyamopsis tetragonoloba L.). Agric Res 2(1):48–57. https://doi.org/10.1007/s40003-012-0049-z
Ramasamy B, Jeyadharmarajan J, Chinnaiyan P (2021) Novel organic assisted Ag-ZnO photocatalyst for atenolol and acetaminophen photocatalytic degradation under visible radiation: performance and reaction mechanism (article). Environ Sci Pollut Res 28(29):39637–39647. https://doi.org/10.1007/s11356-021-13532-2
Ramesh M, Anbuvannan M, Viruthagiri G (2015) Green synthesis of ZnO nanoparticles using Solanum nigrum leaf extract and their antibacterial activity. Spectrochim Acta Part A Mol Biomol Spectrosc 136:864–870
Ramirez-Canon A, Medina-Llamas M, Vezzoli M, Mattia D (2018) Multiscale design of ZnO nanostructured photocatalysts. Phys Chem Chem Phys 20(9):6648–6656
Rane AV, Kanny K, Abitha VK, Thomas S (2018) Chapter 5 - Methods for synthesis of nanoparticles and fabrication of nanocomposites. Synthesis of inorganic nanomaterials (pp. 121–139). Micro and Nano Technologies. https://doi.org/10.1016/B978-0-08-101975-7.00005-1
Ranjith KS, Manivel P, Rajendrakumar RT, Uyar T (2017) Multifunctional ZnO nanorod-reduced graphene oxide hybrids nanocomposites for effective water remediation: Effective sunlight driven degradation of organic dyes and rapid heavy metal adsorption. Chem Eng J 325:588–600. https://doi.org/10.1016/j.cej.2017.05.105
Rao MD, Gautam P (2016) Synthesis and characterization of ZnO nanoflowers using Chlamydomonas reinhardtii: a green approach (Article). Environ Prog Sustain Energy 35(4):1020–1026. https://doi.org/10.1002/ep.12315
Raza W, Faisal SM, Owais M, Bahnemann D, Muneer M (2016) Facile fabrication of highly efficient modified ZnO photocatalyst with enhanced photocatalytic, antibacterial and anticancer activity (article). RSC Adv 6(82):78335–78350. https://doi.org/10.1039/c6ra06774c
Recast E (2010) Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast). Off J Eur Union 18(06):2010
Reddy KO, Maheswari CU, Shukla M, Rajulu AV (2012) Chemical composition and structural characterization of Napier grass fibers (article). Mater Lett 67(1):35–38. https://doi.org/10.1016/j.matlet.2011.09.027
Roberts PH, Thomas KV (2006) The occurrence of selected pharmaceuticals in wastewater effluent and surface waters of the lower Tyne catchment. Sci Total Environ 356(1–3):143–153
Roza L, Fauzia V, Rahman MYA, Isnaeni I, Putro PA (2020) ZnO nanorods decorated with carbon nanodots and its metal doping as efficient photocatalyst for degradation of methyl blue solution. Opt Mater 109:110360. https://doi.org/10.1016/j.optmat.2020.110360
Salam HA, Sivaraj R, Venckatesh R (2014) Green synthesis and characterization of zinc oxide nanoparticles from Ocimum basilicum L. var. purpurascens Benth.-Lamiaceae leaf extract. Mater Lett 131:16–18
Samadi M, Zirak M, Naseri A, Khorashadizade E, Moshfegh AZ (2016) Recent progress on doped ZnO nanostructures for visible-light photocatalysis. Thin Solid Films 605:2–19. https://doi.org/10.1016/j.tsf.2015.12.064
Samadi M, Zirak M, Naseri A, Kheirabadi M, Ebrahimi M, Moshfegh AZ (2019) Design and tailoring of one-dimensional ZnO nanomaterials for photocatalytic degradation of organic dyes: a review (Review). Res Chem Intermed 45(4):2197–2254. https://doi.org/10.1007/s11164-018-03729-5
Sanaeimehr Z, Javadi I, Namvar F (2018) Antiangiogenic and antiapoptotic effects of green-synthesized zinc oxide nanoparticles using Sargassum muticum algae extraction (article). Cancer Nanotechnol 9(1):16. https://doi.org/10.1186/s12645-018-0037-5
Saquib M, Abu Tariq M, Faisal M, Muneer M (2008) Photocatalytic degradation of two selected dye derivatives in aqueous suspensions of titanium dioxide (article). Desalination 219(1–3):301–311. https://doi.org/10.1016/j.desal.2007.06.006
Saravanan R, Sacari E, Gracia F, Khan MM, Mosquera E, Gupta VK (2016) Conducting PANI stimulated ZnO system for visible light photocatalytic degradation of coloured dyes (Article). J Mol Liq 221:1029–1033. https://doi.org/10.1016/j.molliq.2016.06.074
Sarkar D, Tikku S, Thapar V, Srinivasa RS, Khilar KC (2011) Formation of zinc oxide nanoparticles of different shapes in water-in-oil microemulsion. Colloids Surf, A 381(1–3):123–129
Saviano L, Brouziotis AA, Suarez EGP, Siciliano A, Spampinato M, Guida M et al (2023) Catalytic activity of rare earth elements (REEs) in advanced oxidation processes of wastewater pollutants: a review (review). Molecules 28(17):19. https://doi.org/10.3390/molecules28176185
Schumock GT, Li EC, Suda KJ, Matusiak LM, Hunkler RJ, Vermeulen LC et al (2014) National trends in prescription drug expenditures and projections for 2014. Am J Health Syst Pharm 71(6):482–499
Sebuso DP, Kuvarega AT, Lefatshe K, King’ondu CK, Numan N, Maaza M et al (2022) Green synthesis of multilayer graphene/ZnO nanocomposite for photocatalytic applications. J Alloys Compd 900:163526
Seil JT, Webster TJ (2012) Antimicrobial applications of nanotechnology: methods and literature (review). Int J Nanomed 7:2767–2781. https://doi.org/10.2147/ijn.s24805
Semeraro P, Bettini S, Sawalha S, Pal S, Licciulli A, Marzo F et al (2020) Photocatalytic degradation of tetracycline by ZnO/gamma-Fe(2)O(3)paramagnetic nanocomposite material (article). Nanomaterials 10(8):12. https://doi.org/10.3390/nano10081458
Senthilkumar S, Sivakumar T (2014) Green tea (Camellia sinensis) mediated synthesis of zinc oxide (ZnO) nanoparticles and studies on their antimicrobial activities. Int J Pharm Pharm Sci 6(6):461–465
Shamsuzzaman MA, Khanam H, Aljawfi RN (2017) Biological synthesis of ZnO nanoparticles using C. albicans and studying their catalytic performance in the synthesis of steroidal pyrazolines (article). Arabian J Chem 10:S1530–S1536. https://doi.org/10.1016/j.arabjc.2013.05.004
Shandilya P, Sudhaik A, Raizada P, Hosseini-Bandegharaei A, Singh P, Rahmani-Sani A et al (2020) Synthesis of Eu3+−doped ZnO/Bi2O3 heterojunction photocatalyst on graphene oxide sheets for visible light-assisted degradation of 2,4-dimethyl phenol and bacteria killing. Solid State Sci 102:106164. https://doi.org/10.1016/j.solidstatesciences.2020.106164
Shankar S, Rhim JW (2019) Effect of Zn salts and hydrolyzing agents on the morphology and antibacterial activity of zinc oxide nanoparticles (article). Environ Chem Lett 17(2):1105–1109. https://doi.org/10.1007/s10311-018-00835-z
Sharma S (2016) ZnO nano-flowers from Carica papaya milk: degradation of Alizarin Red-S dye and antibacterial activity against Pseudomonas aeruginosa and Staphylococcus aureus. Optik 127(16):6498–6512
Sharma D, Sabela MI, Kanchi S, Mdluli PS, Singh G, Stenström TA et al (2016) Biosynthesis of ZnO nanoparticles using Jacaranda mimosifolia flowers extract: synergistic antibacterial activity and molecular simulated facet specific adsorption studies. J Photochem Photobiol, B 162:199–207
Sharma P, Kumar N, Chauhan R, Singh V, Srivastava VC, Bhatnagar R (2020) Growth of hierarchical ZnO nano flower on large functionalized rGO sheet for superior photocatalytic mineralization of antibiotic. Chem Eng J 392:123746
Shavisi Y, Sharifnia S, Mohamadi Z (2016) Solar-light-harvesting degradation of aqueous ammonia by CuO/ZnO immobilized on pottery plate: linear kinetic modeling for adsorption and photocatalysis process. J Environ Chem Eng 4(3):2736–2744
Shirzad-Siboni M, Khataee A, Vahid B, Joo S, Fallah S (2014) Preparation of a green photocatalyst by immobilization of synthesized ZnO nanosheets on scallop shell for degradation of an azo dye. Curr Nanosci 10(5):684–694
Siahpoosh ZH, Soleimani M (2017) Photocatalytic degradation of azo anionic dye (RR120) in ZnO-Ghezeljeh nanoclay composite catalyst/UV-C system: equilibrium, kinetic and thermodynamic studies. Process Saf Environ Prot 111:180–193
Silvestri S, Ferreira CD, Oliveira V, Varejao J, Labrincha JA, Tobaldi DM (2019) Synthesis of PPy-ZnO composite used as photocatalyst for the degradation of diclofenac under simulated solar irradiation (article). J Photochem Photobiol a-Chem 375:261–269. https://doi.org/10.1016/j.jphotochem.2019.02.034
Simeonidis K, Mourdikoudis S, Kaprara E, Mitrakas M, Polavarapu L (2016) Inorganic engineered nanoparticles in drinking water treatment: a critical review (review). Environ Sci-Water Res Technol 2(1):43–70. https://doi.org/10.1039/c5ew00152h
Simon V, Cavalu S, Simon S, Mocuta H, Vanea E, Prinz M et al (2009) Surface functionalisation of sol-gel derived aluminosilicates in simulated body fluids (article). Solid State Ionics 180(9–10):764–769. https://doi.org/10.1016/j.ssi.2009.02.011
Singh J, Soni RK (2020) Controlled synthesis of CuO decorated defect enriched ZnO nanoflakes for improved sunlight-induced photocatalytic degradation of organic pollutants. Appl Surf Sci 521:146420. https://doi.org/10.1016/j.apsusc.2020.146420
Singh J, Dutta T, Kim K-H, Rawat M, Samddar P, Kumar P (2018) ‘Green’synthesis of metals and their oxide nanoparticles: applications for environmental remediation. J Nanobiotechnol 16(1):1–24
Singh K, Singh G, Singh J (2023) Sustainable synthesis of biogenic ZnO NPs for mitigation of emerging pollutants and pathogens. Environ Res 219:114952
Snyder H (2019) Literature review as a research methodology: an overview and guidelines. J Bus Res 104:333–339
Sodeifian G, Behnood R (2020) Hydrothermal synthesis of N-doped GQD/CuO and N-doped GQD/ZnO nanophotocatalysts for MB dye removal under visible light irradiation: evaluation of a new procedure to produce N-doped GQD/ZnO (article). J Inorg Organomet Polym Mater 30(4):1266–1280. https://doi.org/10.1007/s10904-019-01232-x
Song SL, Wu K, Wu HD, Guo J, Zhang LF (2019) Multi-shelled ZnO decorated with nitrogen and phosphorus co-doped carbon quantum dots: synthesis and enhanced photodegradation activity of methylene blue in aqueous solutions (Article). RSC Adv 9(13):7362–7374. https://doi.org/10.1039/c9ra00168a
Srikanth B, Goutham R, Narayan RB, Ramprasath A, Gopinath K, Sankaranarayanan A (2017) Recent advancements in supporting materials for immobilised photocatalytic applications in waste water treatment. J Environ Manage 200:60–78
Stan M, Popa A, Toloman D, Dehelean A, Lung I, Katona G (2015) Enhanced photocatalytic degradation properties of zinc oxide nanoparticles synthesized by using plant extracts. Mater Sci Semicond Process 39:23–29. https://doi.org/10.1016/j.mssp.2015.04.038
Stiadi Y, Wendari TP, Zilfa, Zulhadjri, Ralnnayeni (2023) Tuning the structural, magnetic, and optical properties of ZnO/NiFe2O4 heterojunction photocatalyst for simultaneous photodegradation of Rhodamine B and methylene blue under natural sunlight. Environ Eng Res 28(3). https://doi.org/10.4491/eer.2022.074
Stojadinović S, Radić N, Tadić N, Vasilić R, Grbić B (2020) Enhanced ultraviolet light driven photocatalytic activity of ZnO particles incorporated by plasma electrolytic oxidation into Al2O3 coatings co-doped with Ce3+. Opt Mater 101:109768
Subramanian V, Zhu H, Vajtai R, Ajayan P, Wei B (2005) Hydrothermal synthesis and pseudocapacitance properties of MnO2 nanostructures. J Phys Chem B 109(43):20207–20214
Sulaiman ISC, Basri M, Masoumi HRF, Chee WJ, Ashari SE, Ismail M (2017) Effects of temperature, time, and solvent ratio on the extraction of phenolic compounds and the anti-radical activity of Clinacanthus nutans Lindau leaves by response surface methodology (Article). Chem Cent J 11:11. https://doi.org/10.1186/s13065-017-0285-1
Sumanth B, Lakshmeesha TR, Ansari MA, Alzohairy MA, Udayashankar AC, Shobha B et al (2020) Mycogenic synthesis of extracellular zinc oxide nanoparticles from Xylaria acuta and its nanoantibiotic potential. Int J Nanomedicine 15:8519–8536. https://doi.org/10.2147/ijn.s271743
Sun L, Shao R, Tang L, Chen Z (2013) Synthesis of ZnFe2O4/ZnO nanocomposites immobilized on graphene with enhanced photocatalytic activity under solar light irradiation. J Alloy Compd 564:55–62. https://doi.org/10.1016/j.jallcom.2013.02.147
Sundrarajan M, Ambika S, Bharathi K (2015) Plant-extract mediated synthesis of ZnO nanoparticles using Pongamia pinnata and their activity against pathogenic bacteria. Adv Powder Technol 26(5):1294–1299
Supraja N, Prasad T, Krishna TG, David E (2016) Synthesis, characterization, and evaluation of the antimicrobial efficacy of Boswellia ovalifoliolata stem bark-extract-mediated zinc oxide nanoparticles. Appl Nanosci 6:581–590
Swati, Verma R, Chauhan A, Shandilya M, Li X, Kumar R et al (2020) Antimicrobial potential of ag-doped ZnO nanostructure synthesized by the green method using moringa oleifera extract. J Environ Chem Eng 8(3):103730. https://doi.org/10.1016/j.jece.2020.103730
Tan Q, Li W, Zhang J, Zhou W, Chen J, Li Y et al (2019) Presence, dissemination and removal of antibiotic resistant bacteria and antibiotic resistance genes in urban drinking water system: a review. Front Environ Sci Eng 13:1–15
Tan X, Wang X, Hang H, Zhang D, Zhang N, Xiao Z et al (2019) Self-assembly method assisted synthesis of g-C3N4/ZnO heterostructure nanocomposites with enhanced photocatalytic performance. Opt Mater 96:109266. https://doi.org/10.1016/j.optmat.2019.109266
Tani T, Mädler L, Pratsinis SE (2002) Synthesis of zinc oxide/silica composite nanoparticles by flame spray pyrolysis. J Mater Sci 37:4627–4632
Tanji K, El Mrabet I, Fahoul Y, Jellal I, Benjelloun M, Belghiti M et al (2023) Epigrammatic progress on the photocatalytic properties of ZnO and TiO2 based hydroxyapatite@photocatlyst toward organic molecules photodegradation: a review (review). J Water Process Eng 53. https://doi.org/10.1016/j.jwpe.2023.103682
Taoufik N, Boumya W, Janani F, Elhalil A, Mahjoubi F (2020) Removal of emerging pharmaceutical pollutants: a systematic mapping study review. J Environ Chem Eng 8(5):104251
Tayyebi A, Outokesh M, Tayebi M, Shafikhani A, Şengör SS (2016) ZnO quantum dots-graphene composites: formation mechanism and enhanced photocatalytic activity for degradation of methyl orange dye. J Alloys Compd 663:738–749. https://doi.org/10.1016/j.jallcom.2015.12.169
Tedla H, Díaz I, Kebede T, Taddesse AM (2015) Synthesis, characterization and photocatalytic activity of zeolite supported ZnO/Fe2O3/MnO2 nanocomposites. J Environ Chem Eng 3(3):1586–1591. https://doi.org/10.1016/j.jece.2015.05.012
Ternes TA (1998) Occurrence of drugs in German sewage treatment plants and rivers. Water Res 32(11):3245–3260
Thakkar KN, Mhatre SS, Parikh RY (2010) Biological synthesis of metallic nanoparticles. Nanomed: Nanotechnol Biol Med 6(2):257–262
Thema FT, Manikandan E, Dhlamini MS, Maaza M (2015) Green synthesis of ZnO nanoparticles via Agathosma betulina natural extract (Article). Mater Lett 161:124–127. https://doi.org/10.1016/j.matlet.2015.08.052
Thiagarajan S, Sanmugam A, Vikraman D (2017) Facile methodology of sol-gel synthesis for metal oxide nanostructures. Recent Appl Sol-gel Synthesis 1–17. https://doi.org/10.5772/intechopen.68708
Tobajas M, Belver C, Rodriguez J (2017) Degradation of emerging pollutants in water under solar irradiation using novel TiO2-ZnO/clay nanoarchitectures. Chem Eng J 309:596–606
Tranfield D, Denyer D, Smart P (2003) Towards a methodology for developing evidence-informed management knowledge by means of systematic review. Br J Manag 14(3):207–222
Tripathi RM, Bhadwal AS, Gupta RK, Singh P, Shrivastav A, Shrivastav BR (2014) ZnO nanoflowers: novel biogenic synthesis and enhanced photocatalytic activity (article). J Photochem Photobiol B-Biol 141:288–295. https://doi.org/10.1016/j.jphotobiol.2014.10.001
Turner S, Tavernier S, Huyberechts G, Biermans E, Bals S, Batenburg K et al (2010) Assisted spray pyrolysis production and characterisation of ZnO nanoparticles with narrow size distribution. J Nanopart Res 12:615–622
Umar A, Kumar R, Chauhan MS, Ibrahim AA, Alhamami MAM, Algadi H et al (2022) Effective fluorescence detection of hydrazine and the photocatalytic degradation of Rhodamine B dye using CdO-ZnO nanocomposites. Coatings 12(12). https://doi.org/10.3390/coatings12121959
Upadhyay RK, Soin N, Bhattacharya G, Saha S, Barman A, Roy SS (2015) Grape extract assisted green synthesis of reduced graphene oxide for water treatment application. Mater Lett 160:355–358
Vaya D, Surolia PK (2020) Semiconductor based photocatalytic degradation of pesticides: an overview. Environ Technol Innov 20:101128. https://doi.org/10.1016/j.eti.2020.101128
Veerakumar P, Sangili A, Saranya K, Pandikumar A, Lin K-C (2021) Palladium and silver nanoparticles embedded on zinc oxide nanostars for photocatalytic degradation of pesticides and herbicides. Chem Eng J 410:128434
Velasco EAP, Galindo RB, Aguilar LAV, Fuentes JAG, Urbina BAP, Morales SAL et al (2020) Effects of the morphology, surface modification and application methods of ZnO-NPs on the growth and biomass of tomato plants (article). Molecules 25(6):11. https://doi.org/10.3390/molecules25061282
Velumani A, Sengodan P, Arumugam P, Rajendran R, Santhanam S, Palanisamy M (2020) Carbon quantum dots supported ZnO sphere based photocatalyst for dye degradation application. Curr Appl Phys 20(10):1176–1184. https://doi.org/10.1016/j.cap.2020.07.016
Verma S, Younis SA, Kim K-H, Dong F (2021) Anisotropic ZnO nanostructures and their nanocomposites as an advanced platform for photocatalytic remediation. J Hazard Mater 415:125651
Vidya C, Hiremath S, Chandraprabha M, Antonyraj M, Gopal IV, Jain A et al (2013) Green synthesis of ZnO nanoparticles by Calotropis gigantea. Int J Curr Eng Technol 1(1):118–120
Vijayakumar S, Vinoj G, Malaikozhundan B, Shanthi S, Vaseeharan B (2015) Plectranthus amboinicus leaf extract mediated synthesis of zinc oxide nanoparticles and its control of methicillin resistant Staphylococcus aureus biofilm and blood sucking mosquito larvae. Spectrochim Acta Part A Mol Biomol Spectrosc 137:886–891
Vu TT, del Río L, Valdés-Solís T, Marbán G (2013) Fabrication of wire mesh-supported ZnO photocatalysts protected against photocorrosion. Appl Catal B 140:189–198
Wang H, Dong S, Chang Y, Zhou X, Hu X (2012) Microstructures and photocatalytic properties of porous ZnO films synthesized by chemical bath deposition method. Appl Surf Sci 258(10):4288–4293
Wang JP, Wang ZY, Huang BB, Ma YD, Liu YY, Qin XY et al (2012) Oxygen vacancy induced band-gap narrowing and enhanced visible light photocatalytic activity of ZnO (article). ACS Appl Mater Interfaces 4(8):4024–4030. https://doi.org/10.1021/am300835p
Wang Y, Zhang XL, Wang AJ, Li X, Wang G, Zhao L (2014) Synthesis of ZnO nanoparticles from microemulsions in a flow type microreactor (article). Chem Eng J 235:191–197. https://doi.org/10.1016/j.cej.2013.09.020
Wang N, Zhou Y, Chen C, Cheng L, Ding H (2016) A g-C3N4 supported graphene oxide/Ag3PO4 composite with remarkably enhanced photocatalytic activity under visible light. Catal Commun 73:74–79. https://doi.org/10.1016/j.catcom.2015.10.015
Wang R, Lu K-Q, Tang Z-R, Xu Y-J (2017) Recent progress in carbon quantum dots: synthesis, properties and applications in photocatalysis. J Mater Chem A 5(8):3717–3734
Wang X, Lu H, Liu W, Guo M, Zhang M (2017) Electrodeposition of flexible stainless steel mesh supported ZnO nanorod arrays with enhanced photocatalytic performance. Ceram Int 43(8):6460–6466
Wang M, Li A-D, Kong J-Z, Gong Y-P, Zhao C, Tang Y-F et al (2018) Fabrication and characterization of ZnO nano-clips by the polyol-mediated process. Nanoscale Res Lett 13(1):1–8
Weldegebrieal GK (2020) Synthesis method, antibacterial and photocatalytic activity of ZnO nanoparticles for azo dyes in wastewater treatment: a review (Review). Inorg Chem Commun 120:29. https://doi.org/10.1016/j.inoche.2020.108140
Wojnarowicz J, Chudoba T, Lojkowski W (2020) A review of microwave synthesis of zinc oxide nanomaterials: reactants, process parameters and morphologies (review). Nanomaterials 10(6). https://doi.org/10.3390/nano10061086
Wu C, Shen L, Zhang Y-C, Huang Q (2011) Solvothermal synthesis of Cr-doped ZnO nanowires with visible light-driven photocatalytic activity. Mater Lett 65(12):1794–1796
Xiao Q, Huang S, Zhang J, Xiao C, Tan X (2008) Sonochemical synthesis of ZnO nanosheet. J Alloy Compd 459(1–2):L18–L22
Xu H, Zeiger BW, Suslick KS (2013) Sonochemical synthesis of nanomaterials. Chem Soc Rev 42(7):2555–2567
Xu L, Xian F, Pei S, Zhu Y (2020) Photocatalytic degradation of organic dyes using ZnO nanorods supported by stainless steel wire mesh deposited by one-step method. Optik 203:164036
Xu P, Wang P, Wang Q, Wei R, Li Y, Xin Y et al (2021) Facile synthesis of Ag2O/ZnO/rGO heterojunction with enhanced photocatalytic activity under simulated solar light: Kinetics and mechanism. J Hazard Mater 403:124011
Yadav D, Tyagi N, Yadav H, James A, Sareen N, Kapoor M et al (2023) Effect of various morphologies and dopants on piezoelectric and detection properties of ZnO at the nanoscale: a review (Review). J Mater Sci 58(26):10576–10599. https://doi.org/10.1007/s10853-023-08680-4
Yang G, Park SJ (2019) Conventional and microwave hydrothermal synthesis and application of functional materials: a review (review). Materials 12(7):18. https://doi.org/10.3390/ma12071177
Yaqoob AA, Ahmad H, Parveen T, Ahmad A, Oves M, Ismail IMI et al (2020) Recent advances in metal decorated nanomaterials and their various biological applications: a review (review). Front Chem 8:23. https://doi.org/10.3389/fchem.2020.00341
Yaqoob AA, Noor N, Serra A, Ibrahim MNM (2020) Advances and challenges in developing efficient graphene oxide-based ZnO photocatalysts for dye photo-oxidation (review). Nanomaterials 10(5):24. https://doi.org/10.3390/nano10050932
Yu X, Zhang J, Zhang J, Niu J, Zhao J, Wei Y et al (2019) Photocatalytic degradation of ciprofloxacin using Zn-doped Cu2O particles: analysis of degradation pathways and intermediates. Chem Eng J 374:316–327. https://doi.org/10.1016/j.cej.2019.05.177
Yuan XH, Xu WZ, Huang FL, Chen DS, Wei QF (2016) Polyester fabric coated with Ag/ZnO composite film by magnetron sputtering (Article). Appl Surf Sci 390:863–869. https://doi.org/10.1016/j.apsusc.2016.08.164
Zak AK, Abd Majid W, Wang H, Yousefi R, Golsheikh AM, Ren Z (2013) Sonochemical synthesis of hierarchical ZnO nanostructures. Ultrason Sonochem 20(1):395–400
Zang CF, Chen H, Han XY, Zhang W, Wu JF, Liang FH et al (2022) Rational construction of ZnO/CuS heterostructures-modified PVDF nanofiber photocatalysts with enhanced photocatalytic activity. RSC Adv 12(52):34107–34116. https://doi.org/10.1039/d2ra06151a
Zhang Y, Lu J, Wu J, Wang J, Luo Y (2020) Potential risks of microplastics combined with superbugs: Enrichment of antibiotic resistant bacteria on the surface of microplastics in mariculture system. Ecotoxicol Environ Saf 187:109852
Zheng GG, Shang WJ, Xu LH, Guo S, Zhou ZH (2015) Enhanced photocatalytic activity of ZnO thin films deriving from a porous structure (Article). Mater Lett 150:1–4. https://doi.org/10.1016/j.matlet.2015.03.001
Zheng FY, Queiros JM, Martins PM, de Luis RF, Fidalgo-Marijuan A, Vilas-Vilela JL et al (2023) Au-sensitised TiO2 and ZnO nanoparticles for broadband pharmaceuticals photocatalytic degradation in water remediation. Colloids Surf a-Physicochem Eng Aspects 671. https://doi.org/10.1016/j.colsurfa.2023.131594
Zhou X, Shi T, Zhou H (2012) Hydrothermal preparation of ZnO-reduced graphene oxide hybrid with high performance in photocatalytic degradation. Appl Surf Sci 258(17):6204–6211. https://doi.org/10.1016/j.apsusc.2012.02.131
Zhou S-L, Zhang S, Liu F, Liu J-J, Xue J-J, Yang D-J et al (2016) ZnO nanoflowers photocatalysis of norfloxacin: effect of triangular silver nanoplates and water matrix on degradation rates. J Photochem Photobiol, A 328:97–104
Zhu Y, Zhou L, Jiang Q (2020) One-dimensional ZnO nanowires grown on three-dimensional scaffolds for improved photocatalytic activity. Ceram Int 46(1):1158–1163
Zong Y, Li Z, Wang X, Ma J, Men Y (2014) Synthesis and high photocatalytic activity of Eu-doped ZnO nanoparticles. Ceram Int 40(7):10375–10382
Acknowledgements
This work was supported by a grant of the Romanian Education Ministry, UEFISCDI, project number 86PTE/2022, “Advanced technology for purging industrial wastewaters by using environmentally friendly products, in the context of climate changes” (CHITOMAG), within PNCDI III.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception. EM had the idea for the article. AC and AAȘ performed the literature search. EM, MR, and CP drafted and revised the work. AMP, GC, and ACB contributed to the study conception and data analysis.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Angeles Blanco
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Matei, E., Șăulean, A.A., Râpă, M. et al. ZnO nanostructured matrix as nexus catalysts for the removal of emerging pollutants. Environ Sci Pollut Res 30, 114779–114821 (2023). https://doi.org/10.1007/s11356-023-30713-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-023-30713-3