The antiplane problem of the theory of elasticity for an elastic piecewise homogeneous anisotropic body was solved using the method of singular integral equations. For one anisotropic inclusion in the orthotropic plane, the constructed system of integral equations of the second kind was solved numerically by the quadrature method. The influence of elastic constants of anisotropic materials of the plane and the inclusion, as well as the shape of the curvilinear inclusion on the shear stress distributions at the interface of the materials was studied.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The use of high-strength composite materials in modern technology requires the study of the stress-strain state of such bodies with stress concentrators as holes, inclusions, cracks, and notches. Different types of composite materials can be modeled by a homogeneous or piecewise-homogeneous anisotropic medium. A number of scientific papers [1,2,3,4,5,6,7,8,9,10] deal with the problems of the theory of elasticity of anisotropic bodies with holes, cracks, and inclusions. One of the most common methods of solving such problems is the method of complex potentials (CP) written in additional mathematical planes associated with the elastic constants of anisotropic materials [2, 4, 11,12,13,14,15,16,17]. Two-dimensional problems of the theory of elasticity for piecewise homogeneous anisotropic bodies were also considered [6, 18,19,20,21,22,23,24,25]. Separate numerical results were obtained for stress distributions along the boundary contour of anisotropic materials of an infinite plane and finite two-dimensional inclusions [2, 6, 18, 19, 22, 25].
The antiplane problem of the theory of elasticity for an infinite elastic anisotropic plane (matrix) with smooth curvilinear anisotropic inclusions under their perfect mechanical contact is considered. The methods of CP and singular integral equations (SIE) were used for anisotropic bodies with cracks, holes, and notches [17, 26,27,28]. For an orthotropic matrix with one anisotropic inclusion, the SIE system of the second kind is solved numerically. The longitudinal shear stress distributions at the interphase of the matrix materials and the inclusion were determined depending on the elastic solid materials, as well as the shape of the contour of the smooth curvilinear inclusion. The parameters of the problem, which significantly affect the distribution of shear stresses at the boundary contours of anisotropic materials, are established.
Some Relations of the Antiplane Problem of the Theory of Elasticity of an Anisotropic Body
Let us consider the longitudinal shear of an anisotropic body in the Cartesian coordinate system (x, y, z). The components of the vector of elastic displacements can be presented as \({u}_{x}=0,{\hspace{0.17em}\hspace{0.17em}}{u}_{y}=0,{\hspace{0.17em}\hspace{0.17em}}{u}_{z}=w=w\left(x,y\right)\) if the axis of deformation is directed along the axis z. The relationship between non-zero components of deformations \({\upvarepsilon }_{yz},{\hspace{0.17em}\hspace{0.17em}}{\upvarepsilon }_{xz}\) and stresses \({\uptau }_{yz},{\hspace{0.17em}\hspace{0.17em}}{\uptau }_{xz}\) was obtained based on Hooke’s generalized law [7, 11]. Expressing the general solution of the differential equation of equilibrium in displacements in terms of the analytical function \({\upvarphi}_{3}\left({z}_{3}\right)\) of the complex argument \({z}_{3}=x+{\upmu }_{3}y\)
the relationship for stresses is given in terms of CP \({\Phi}_{3}\left({z}_{3}\right)={\upvarphi}^{\prime}_{3}\left({z}_{3}\right)\) as [2, 11]
Here \({\upmu }_{3}={\alpha }_{3}+i{\gamma }_{3}\) is the complex root of the characteristic equation of the antiplane problem, where \({\upalpha}_{3}=\frac{{a}_{45}}{{a}_{55}}\), \({\gamma }_{3}=\frac{{a}_{0}}{{a}_{55}}\); \(\left\{{a}_{55}-{a}_{45},{a}_{44}\right\}={a}_{0}^{2}\left\{{A}_{44},{A}_{45},{A}_{55}\right\}\) are the elastic constants of anisotropic material, \({a}_{0}=\sqrt{{a}_{44}{a}_{55}-{a}_{45}^{2}}>0\).
With the help of relations (2), write formulas for assessing shear stresses \({\uptau }_{nz}(t)\) on some smooth curvilinear contour L with a given normal n, as well as contour stresses n, on the planes orthogonal to the contour L [17]
Here the contour \({L}_{3}\) in the auxiliary plane of the complex variable \({z}_{3}\) corresponds to the contour L in the plane \(\left(x,y\right)\); s is the arc abscissa of the point \(t\in L\).
Problem Formulation
Consider a two-dimensional problem of the theory of elasticity under antiplane deformation of an anisotropic body \({S}_{0}\) (matrix) with smooth anisotropic inclusions \({S}_{j}{\hspace{0.17em}}\left(j=\stackrel{-}{1,J}\right)\). Assume that there is a perfect mechanical contact between the inclusions and the matrix, that is, when passing through the contours of the inclusions \({L}_{j}{\hspace{0.17em}}\left(j=\stackrel{-}{1,J}\right)\), the normal component of shear stress and displacement \(w\left(x,y\right)\) are continuous:
Here, the superscripts indicate the limiting values of the corresponding values when approaching the contours \({L}_{j}\) from the left (+) or right (–) when bypassing them counterclockwise (Fig. 1).
The matrix \({S}_{0}\) at infinity is under the action of longitudinal shear
which does not limit the generality of the given load, since the matrix is anisotropic.
The problem with boundary conditions (5), and (6) is solved by the SIE method [17, 27, 28]. Under load (7), the stress state of an infinite piecewise homogeneous anisotropic body \(S=\cup {S}_{j}{\hspace{0.17em}\hspace{0.17em}}\left(j=\stackrel{-}{0,J}\right)\) is described by relations (2)–(4), written in complex mathematical planes \({z}_{3}^{j}=x+{\mu }_{3}^{j}y\) \(\left(j=\stackrel{-}{0,J}\right)\). Here and in the future, the values with the superscript \(j=\stackrel{-}{1,J}\) refer to the jth inclusion \({S}_{j}\) (\({\mu }_{3}^{j}={\alpha }_{3}^{j}+i{\gamma }_{3}^{j}\), \({\alpha }_{3}^{j}={a}_{45}^{j}/{a}_{55}^{j}\), \({\gamma }_{3}^{j}={a}_{j}/{a}_{55}^{j}\), \({a}_{j}=\sqrt{{a}_{44}^{j}{a}_{55}^{j}-{a}_{45}^{j}{a}_{45}^{j}}\)), and with the index \(j=0\) refer to the matrix \({S}_{0}\) and correspond to the elastic constants of anisotropic materials of the inclusions and the matrix.
The stress potentials for the matrix and inclusions will be searched for in the form of analytical functions
where \({{\phi }{\prime}}_{3}^{j}\left({t}_{3}^{j}\right)=\frac{d{\phi }_{3}^{j}\left({t}_{3}^{j}\right)}{d{t}_{3}^{j}},{\hspace{0.17em}\hspace{0.17em}}j=\stackrel{-}{0,J}\); \({{\phi }{\prime}}_{3}^{0}\left({t}_{3}^{0}\right)=\left\{{{\phi }{\prime}}_{3j}^{0}\left({t}_{3j}^{0}\right),{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}{t}_{3j}^{0}\in {L}_{3j}^{0},{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}j=\stackrel{-}{1,J}\right\}\) are unknown complex functions; \({t}_{3}^{j}={\mathrm{Re}}\left(t\right)+{\mu }_{3}^{j}{\mathrm{Im}}\left(t\right)\in {L}_{3}^{j},{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}t\in {L}_{j}\); \({L}_{0}=\cup {L}_{j}\), \({L}_{3}^{0}=\cup {L}_{3j}^{0}\) \(\left(j=\stackrel{-}{1,J}\right)\); contours \({L}_{j}{\hspace{0.17em}\hspace{0.17em}}\left(j=\stackrel{-}{1,J}\right)\) in the physical plane \(z=x+iy\) correspond to the contours \({L}_{3j}^{0},{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}{L}_{3}^{j}\) in mathematical planes \({z}_{3}^{0},{\hspace{0.17em}\hspace{0.17em}}{z}_{3}^{j}\) (Fig. 1). Complex constants \({\Gamma }_{3}^{j}=\left(\frac{1+i{\alpha }_{3}^{j}}{{\gamma }_{3}^{j}}\right)\tau \) determine the same homogeneous stress states (\({\tau }_{yz}\left(z\right)=\tau \), \({\tau }_{xz}\left(z\right)=0,{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}z\in {S}_{j}\), \(j=\stackrel{-}{0,J}\)) of the matrix (\(j=0\)) and inclusions (\(j=\stackrel{-}{1,J}\)) under loading (7). The corresponding normal and tangential longitudinal shear stresses (3), and (4) on curvilinear smooth contours \({L}_{j}\) in anisotropic bodies are determined by simple expressions
which are independent of elastic constants of materials and remain the same as for isotropic bodies.
Using the Sokhotski–Plemelj formula for Cauchy integrals, we find the limiting values (\(z\to t\in {L}_{j}\)) of the CP of stresses (8) on the contours \({L}_{j}{\hspace{0.17em}\hspace{0.17em}}(j=\stackrel{-}{1,J})\) from the sides of the inclusions and the matrix.
Based on relations (1), (3), (9) from the boundary conditions at each of the contours of the inclusions \({L}_{j}\) (5) and the conditions differentiated along the arc abscissas \({s}_{j}\) (6)
a system \(2J\) of real SIEs of the 2nd kind is obtained
where \({s}_{j},{\hspace{0.17em}\hspace{0.17em}}{{s}{\prime}}_{k}\) are arc abscissas of the points \(t\in {L}_{j},{\hspace{0.17em}\hspace{0.17em}}{t}{\prime}\in {L}_{k}{\hspace{0.17em}\hspace{0.17em}}\left(j,k=\stackrel{-}{1,J}\right)\),
Here, taking into account the boundary conditions (5) and (10) the dependences between the unknown complex functions \({{\phi }{\prime}}_{3}^{j}\left({s}_{j}\right)={A}_{3j}{{\phi }{\prime}}_{3j}^{0}\left({s}_{j}\right)+{B}_{3j}\overline{{{\phi }{\prime}}_{3j}^{0}\left({s}_{j}\right)}\) [6, 18], where \({{\phi }{\prime}}_{3j}^{0}\left({s}_{j}\right)=\frac{{{\phi }{\prime}}_{3j}^{0}({t}_{3j}^{0})d{t}_{3j}^{0}}{d{s}_{j}}\), \({{\phi }{\prime}}_{3}^{j}\left({s}_{j}\right)=\frac{{{\phi }{\prime}}_{3}^{j}({t}_{3}^{j})d{t}_{3}^{j}}{d{s}_{j}}\), \({A}_{3j}=\frac{1+{a}_{0j}}{2}\), \({B}_{3j}=\frac{1-{a}_{0j}}{2}\), \({a}_{0j}=\frac{{a}_{0}}{{a}_{j}}\) were used. For homogeneous stress states of the inclusions and the matrix, there are the following dependencies \({\mathrm{Re}}\left[\frac{{\Gamma }_{3}^{j}d{t}_{3}^{j}}{d{s}_{j}}\right]={\mathrm{Re}}\left[\frac{{\Gamma }_{3}^{0}d{t}_{3j}^{0}}{d{s}_{j}}\right],{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}{t}_{3}^{j}\in {L}_{3}^{j},{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}{t}_{3j}^{0}\in {L}_{3j}^{0}\). For a piecewise homogeneous isotropic body (\({\alpha }_{3}^{j}=0,{\hspace{0.17em}\hspace{0.17em}}{\gamma }_{3}^{j}=1,{\hspace{0.17em}\hspace{0.17em}}j=\stackrel{-}{0,J}\)), the well-known SIE system is obtained [29] from equations (11).
One Anisotropic Inclusion
The SIE system (11) was numerically solved by the quadrature method [17] in the presence of one anisotropic inclusion \({S}_{1}{\hspace{0.17em}\hspace{0.17em}}\left(J=1,{\hspace{0.17em}\hspace{0.17em}}{L}_{0}={L}_{1}=L\right)\) in the matrix. We considered an orthotropic matrix \({S}_{0}\) (with the main axes of orthotropy along the axes Ox, Oy), for which \({\mu }_{3}^{0}=i{\gamma }_{3}^{0},{\hspace{0.17em}\hspace{0.17em}\hspace{0.17em}}{\alpha }_{3}^{0}=0\), \({\gamma }_{3}^{0}=\sqrt{\frac{{G}_{x3}^{0}}{{G}_{y3}^{0}}}\), \({a}_{0}=\frac{1}{\sqrt{{G}_{x3}^{0}{G}_{y3}^{0}}}\), and an orthotropic inclusion \({S}_{1}\) (with axes of orthotropy inclined to the axes Ox, Oy at an angle β), for which
where \({\gamma }_{30}^{1}=\sqrt{\frac{{G}_{13}^{1}}{{G}_{23}^{1}}}\), \({a}_{1}=\frac{1}{\sqrt{{G}_{13}^{1}{G}_{23}^{1}}}\). Here \({G}_{x3}^{0},{\hspace{0.17em}\hspace{0.17em}}{G}_{y3}^{0}\); \({G}_{13}^{1},{\hspace{0.17em}\hspace{0.17em}}{G}_{23}^{1}\) are shear moduli along the orthotropy axes of the matrix and inclusion materials, respectively. Having set the inclusion L contour in the physical plane xOy in the parametric form \(t=\omega \left(\eta \right)\), \(t{\prime}=\omega \left(\xi \right)\); \(\eta ,{\hspace{0.17em}}\xi \in \left[0;{\hspace{0.17em}\hspace{0.17em}}2\pi \right]\), the problem is reduced to solving two real SIEs of the second kind (11) (\(J=1\)).
Based on the limiting CP values (9) for one inclusion
contact distributions \({\tau }_{nz}\left(t\right)={\tau }_{nz}^{+}\left(t\right)={\tau }_{nz}^{-}\left(t\right)\) (3), (5), and contour (4) shear stresses from the sides of inclusion \({\tau }_{sz}^{+}(t)\) and matrix are defined:
Here \({f}_{s}\left(t,\mu \right)=\frac{\left(1-i\mu \right)\omega {\prime}\left(\eta \right)-\left(1+i\mu \right)\stackrel{-}{\omega {\prime}\left(\eta \right)}}{2i\left|\omega {\prime}\left(\eta \right)\right|}\), \(\omega {^{\prime}}_{k}\left(\eta \right)=\frac{d{\omega }_{k}\left(\eta \right)}{d\eta }\), \(k=0;{\hspace{0.17em}\hspace{0.17em}}1\), \({\omega }_{0}\left(\eta \right)={\mathrm{Re}}\left[\omega \left(\eta \right)\right]+{\mu }_{3}^{0}{\mathrm{Im}}\left[\omega \left(\eta \right)\right]\), \({\omega }_{1}\left(\eta \right)={\mathrm{Re}}\left[\omega \left(\eta \right)\right]+{\mu }_{3}^{1}{\mathrm{Im}}\left[\omega \left(\eta \right)\right]\), \({u}_{1}\left(\eta \right)={\mathrm{Re}}\left[{{\phi }{\prime}}_{31}^{0}\left(s\right)\right]=\); \(={\mathrm{Re}}\left[\frac{{{\phi }{\prime}}_{31}^{0}\left({t}_{31}^{0}\right)d{t}_{31}^{0}}{ds}\right]\); \({u}_{2}\left(\eta \right)={\mathrm{Im}}\left[{{\phi }{\prime}}_{31}^{0}\left(s\right)\right]\), where s is the arc abscissa of the point \(t=\omega \left(\eta \right)\in L\); \({a}_{01}=\frac{{a}_{0}}{{a}_{1}}\); \({\Gamma }_{3}^{0}=\tau \), \({\Gamma }_{3}^{1}=\left(1+\frac{i{\alpha }_{3}^{1}}{{\gamma }_{3}^{1}}\right)\tau \). Calculation is done for the inclusion contour of an elliptical shape
and some values of the elastic constants of the matrix and inclusion materials.
Orthotropic Matrix and Elastic Isotropic Inclusion
The influence of the level of orthotropy of the matrix material (mechanical parameter \({\gamma }_{3}^{0}=\sqrt{\frac{{G}_{13}^{0}}{{G}_{23}^{0}}}\)) on the distributions of contact (3) and contour (15) stresses significantly depends on the parameter \({a}_{01}=\frac{{a}_{0}}{{a}_{1}}=\frac{\sqrt{{G}_{13}^{1}{G}_{23}^{1}}}{\sqrt{{G}_{13}^{0}{G}_{23}^{0}}}\), which characterizes the total relative rigidity (for longitudinal shear along the Oz axis) of the inclusion material relative to the matrix material (Fig. 2). An orthotropic matrix (\({\gamma }_{3}^{0}\in \left[{\mathrm{0,25}};{\hspace{0.17em}\hspace{0.17em}}4\right]\)) with an isotropic (\({\gamma }_{3}^{1}=1\), \({\alpha }_{3}^{1}=0\), \({G}_{13}^{1}={G}_{23}^{1}={G}_{3}^{1}\)) circular (\(\frac{b}{a}=1\)) inclusion is considered. A change in the parameter \({a}_{01}\) from 0.25 to 4 leads to a 4-fold increase in stresses \({\tau }_{nz}\left(\eta \right)\) and \({\tau }_{sz}^{+}\left(\eta \right)\) (Figs. 2a–d), and the relative contour stresses
from the matrix \({\tau }_{sz}^{-}\left(\eta \right)\) side also undergo significant qualitative changes (Figs. 2e, f). The obtained maximum values of contact stresses \({\tau }_{nz}\left(\eta \right)\) for a piecewise isotropic body (isotropic matrix with an elliptical inclusion) agree well with those known [6].
Orthotropic Matrix and Anisotropic Inclusion
The influence of the inclination angle β of the orthotropy axes of the inclusion \({S}_{1}\) material to the axes Ox, Oy on the stress distributions at the interphase of the materials was studied (Fig. 3). Such an inclusion for angles \(\beta \ne \left\{0;{\hspace{0.17em}\hspace{0.17em}}\pi /2\right\}\) in the introduced Cartesian coordinate system xOy (Fig. 3d) is described by the model of an anisotropic body with mechanical parameters (13). The elliptic inclusion (\(b/a=0.25\)) with the ratio of shear moduli along the axes of material orthotropy \({G}_{13}^{1}/{G}_{23}^{1}=1/8\) in a relatively compliant orthotropic matrix (\({a}_{01}=8\sqrt{2}\); \({\gamma }_{3}^{0}=2\)) is considered. The rotation of the axes of orthotropy of the inclusion material significantly changes the contour stress distributions from the inclusion side (Fig. 3b). It almost does not affect the contact (Fig. 3a) and contour stresses from the matrix side (Fig. 3c).
For the given load (7) for different geometric and mechanical parameters of the problem (\(b/a,{\hspace{0.17em}\hspace{0.17em}}\beta ,{\hspace{0.17em}\hspace{0.17em}}{\gamma }_{3}^{0},{\hspace{0.17em}\hspace{0.17em}}{\gamma }_{3}^{1},{\hspace{0.17em}\hspace{0.17em}}{a}_{0}/{a}_{1}\)), the stress \({\tau }_{xz}(z),{\hspace{0.17em}\hspace{0.17em}}{\tau }_{yz}(z)\) inside the elliptical anisotropic inclusion (\(z\in {S}_{1}\)) was calculated and the homogeneity of its stress state was found, which is consistent with the known analytical result [24].
Constant stresses \({\tau}_{xz}={\mathrm{const}}\), \({\tau}_{yz}={\mathrm{const}}\) in an elliptical inclusion, depend significantly on the parameters of the problem discussed above.
CONCLUSIONS
The antiplane problem of the theory of elasticity for an infinite anisotropic body with a finite number of smooth curvilinear anisotropic inclusions is considered. Using the methods of complex potentials and singular integral equations, the problem was reduced to solving systems of real integral equations of the second kind. For an orthotropic plane with one anisotropic inclusion, the constructed system of equations was solved numerically by the method of quadratures. The distributions of shear contact and contour stress at the materials interphase both from the side of the plane and the side of the inclusion were determined. The influence of these stresses on elastic constants of orthotropic materials of the plane and the inclusion of the material interphase of elliptical shape was studied. The problem parameters are established, which essentially affect the distribution of shear stresses at the inclusion contour.
Author contributions. All authors have contributed equally to the work, authors also read and approved the final manuscript.
Conflict of interest. Author M. P. Savruk is an Editorial Board Member of Materials Science (translated from Fizyko-Khimichna Mekhanika Materialiv). The paper was handled by another Editorial Board Member and has undergone a rigorous peer review process. Author M. P. Savruk was not involved in the journal’s peer review or decisions related to this manuscript.
Funding. The partial financial support was received from the National Academy of Sciences of Ukraine under the R&D project (Registration No. 0123U100936).
References
G. N. Savin, Distribution of Stresses at Holes [in Russian], Naukova Dumka, Kyiv (1968).
S. G. Lekhnitsky, Anisotropic Plates [in Russian], Gostekhizdat, Moscow (1957).
G. C. Sih, P. C. Paris, and G. R. Irwin, “On cracks in rectilinearly anisotropic bodies,” Int. J. Fract. Mech., 1, Is. 3, 189–203 (1965). https://doi.org/10.1007/BF00186854
L. A. Filshtinskii, “Elastic equilibrium of a plane anisotropic medium weakened by arbitrary curvilinear cracks. Limit transition to an isotropic medium,” Izv. AN USSR. Solid Mechanics, Is. 5, 91–97(1976).
N. I. Ioakimidis, and P. S. Theocaris, “The problem of the simple smooth crack in an infinite anisotropic elastic medium,” Int. J. Solids Struct., 13, Is. 4, 269–278 (1977). https://doi.org/10.1016/0020-7683(77)90012-9
E. I. Grygoliuk, and L. A. Filshtinskii, Regular Piecewise Homogeneous Structures with Defects [in Russian], Fizmatlit, Moscow (1994).
T. C. T. Ting, Anisotropic Elasticity. Theory and Applications, Oxford University Press, Oxford (1996).
V. V. Bozhedarnik, O. Ye. Andreikiv, and H. T. Sulym, Fracture Mechanics, Strength and Durability of Continuously Reinforced Composites. In 2 vol. [in Ukrainian], Nadstyria, Lutsk, Vol. 2 (2007).
H. T. Sulym, Fundamentals of the Mathematical Theory of Thermoelastic Equilibrium of Deformable Solids with Fine Inclusions [in Ukrainian], Publ. House of Shevchenko Sci. Society, Lviv, (2007).
C. Hwu, Anisotropic Elastic Plates, Springer, London (2010). https://doi.org/10.1007/978-1-4419-5915-7
S. G. Lekhnitsky, Elasticity Theory of an Anisotropic Body [in Russian], Nauka, Moscow (1977).
L. A. Filshtinskii, “Longitudinal shear in an anisotropic medium with cuts,” Izv. AN USSR. Solid Mechanics, Is. 4, 68–72 (1978).
L. V. Volkova, and L. A. Filshtinskii, “A doubly periodic problem of the theory of elasticity for longitudinal shear of an anisotropic medium with cracks,” Izv. AN USSR. Solid Mechanics, Is. 2, 91–95 (1979).
M. A. Kattis, and E. Providas, “Two-phase potentials in anisotropic elasticity: Antiplane deformation,” Int. J. Eng. Sci., 36, Iss. 7–8, 801–811 (1998). https://doi.org/10.1016/S0020-7225(97)00115-8
H. T. Sulym, and S. P. Shevchuk, “Plane problem for a piecewise-homogeneous anisotropic body with elastic inclusion in the form of a strip,” Mater. Sci., 35, No. 6, 757–769 (1999). https://doi.org/10.1007/BF02359454
V. V. Bozhydarnik, and O. V. Maksymovych, Elastic and Limiting Equilibrium of Anisotropic Plates with Holes and Cracks [in Ukrainian], Lutsk State Techn. Univ., Lutsk (2003).
M. P. Savruk, and A. Kazberuk, Stress Concentration at Notches, Springer, Cham (2017). https://doi.org/10.1007/978-3-319-44555-7
V. N. Dolgikh, and L. A.Filshtinskii, “Theory of linearly reinforced composite material with anisotropic structural components,” Izv. AN USSR. Solid Mechanics, Is. 6, 53–63 (1978).
V. N. Dolgikh, and L. A.Filshtinskii, “Longitudinal shift of the composite material with defects,” Izv. AN USSR. Solid Mechanics, Is. 4, 103–110 (1980).
C. Hwu, and T. C. T. Ting, “Two-dimensional problems of the anisotropic elastic solid with an elliptic inclusion,” Quart. J. Mech. Appl. Math., 42, Pt. 4, 553–572 (1989). https://doi.org/10.1093/qjmam/42.4.553
C. Hwu, and W. J. Yen, “On the anisotropic elastic inclusions in plane elastostatics,” J. Appl. Mech., 60, 626–632 (1993). https://doi.org/10.1115/1.2900850
C. Y. Dong, S. H. Lo, and Y. K. Cheung, “Stress analysis of inclusion problems of various shapes in an infinite anisotropic elastic medium,” Comput. Meth. Appl. Mech. Eng., 192, 683–696 (2003). https://doi.org/10.1016/S0045-7825(02)00579-0
A. F. Krivoi, and G. Y. Popov, “Interface tunnel cracks in a composite anisotropic space,” J. Appl. Math. Mech., 72, 499–507 (2008). https://doi.org/10.1016/j.jappmathmech.2008.08.001
T. C. T. Ting, and P. Schiavone, “Uniform antiplane shear stress inside an anisotropic elastic inclusion of arbitrary shape with perfect or imperfect interface bonding,” Int. J. Eng. Sci., 48, Is. 1, 67–77 (2010). https://doi.org/10.1016/j.ijengsci.2009.06.008
O. Maksymovych, and A. Podhorecki, “Determination of stresses in anisotropic plates with elastic inclusions based on singular integral equations,” Eng. Anal. Bound. Elem., 104, 364–372 (2019). https://doi.org/10.1016/j.enganabound.2019.03.039
M. P. Savruk, L. I. Onyshko, O. I. Kvasnyuk, and N. M. Bida, “Stressed state of an orthotropic plane with two-section kinked crack under antiplane deformation,” Mater. Sci., 56, No. 2, 143–151 (2020). https://doi.org/10.1007/s11003-020-00408-y
M. P. Savruk, L. Yo. Onyshko, and O. I. Kvasniuk, “Stress distribution near sharp and rounded V-notches in anisotropic elastic body under antiplane strain,” Mater. Sci., 58, No. 4, 427–436 (2023). https://doi.org/10.1007/s11003-023-00681-7
M. P. Savruk, A. Kazberuk, V. S. Kravets, and A. B. Chornenkyi, “Stress state of an orthotropic plate at the holes with sharp and rounded tips,” Mater. Sci., 58, No. 6, 709–716 (2023). https://doi.org/10.1007/s11003-023-00720-3
M. P. Savruk, and V. M. Zeleniak, Two-Dimensional Problems of Thermoelasticity for Piecewise Homogeneous Bodies with Cracks [in Ukrainian], Rastr-7, Lviv (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 59, No. 5, 74–82, September–October, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Savruk, M.P., Kravets, V.S., Onyshko, L.Y. et al. Determination of the Stress State of an Anisotropic Body with Smooth Curvilinear Inclusions Under Longitudinal Shear. Mater Sci 59, 591–600 (2024). https://doi.org/10.1007/s11003-024-00815-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-024-00815-5