A new type of combined honeycomb structure produced by optimally organizing the hexagons and square unit cells is proposed. The related equivalent elastic parameters are studied based on the strain energy equivalent theory. A numerical simulation method is used to verify the correctness of the equivalent mechanical model. A good agreement between the simulation values and theoretical solutions is observed. The study of mechanical properties of the combined honeycomb structure shows the great advantages in mechanical properties as compared with the traditional hexagonal honeycomb structure. With the same equivalent density, the in-plane equivalent elastic modulus of the new combined honeycomb is improved to 22%, the shear modulus enhanced to 95%. The external equivalent elastic modulus and shear modulus are improved to 33% and 29%, respectively. The carried out study provides a theoretical basis for the combined honeycomb structure’s further research and also gives a new way to improve the current honeycomb sandwich.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
L. J. Gibson, “Modelling the mechanical behavior of cellular materials,” Mater. Sci. Eng. A, 110, 1–36 (1989).
J. S. Park, J. H. Joo, B. C. Lee, et al., “Mechanical behaviour of tube-woven Kagome truss cores under compression,” Int. J. Mech. Sci., 53, No. 1, 65–73 (2011).
T. Strek, H. Jopek, B. T. Maruszewski, et al., “Computational analysis of sandwich-structured composites with an auxetic phase,” Physica Status Solidi (b), 251, No. 2, 354–366 (2014).
J. S. Kumar and K. Kalaichelvan, “Taguchi-grey multi-response optimization on structural parameters of honeycomb core sandwich structure for low velocity impact test,” Silicon, 10, No. 3, 879–889 (2018).
M. Montemurro, A. Catapano, and D. Doroszewski, “A multi-scale approach for the simultaneous shape and material optimisation of sandwich panels with cellular core,” Composites, Part B: Engineering, 91, 458–472 (2016).
J. Feng, J. Fu, C. Shang, et al., “Sandwich panel design and performance optimization based on triply periodic minimal surfaces,” Computer-Aided Design, 115, 307–322 (2019).
J. H. Sjolund, D. Peeters, and E. Lund, “Discrete material and thickness optimization of sandwich structures,” Compos. Struct., 217, 75–88 (2019).
M. Gholami, R. A. Alashti, and A. Fathi, “Optimal design of a honeycomb core composite sandwich panel using evolutionary optimization algorithms,” Compos. Struct., 139, 254–262 (2016).
J. R. Vinson, The Behavior of Sandwich Structures of Isotropic and Composite Materials, Routledge (2018).
R. Oftadeh, B. Haghpanah, J. Papadopoulos, et al., “Mechanics of anisotropic hierarchical honeycombs,” Int. J. Mech. Sci., 81, 126–136 (2014).
L. J. Gibson and M. F. Ashby, The Mechanics of Honeycombs, Cambridge University Press, Cambridge (1997).
W. S. Burton and A. K. Noor, “Assessment of continuum models for sandwich panel honeycomb cores,” Comput. Meth. Appl. Mech. Eng., 145, No. 3–4, 341–360 (1997).
F. Minghui and Y. Jiuren, “Equivalent elastic parameters of the honeycomb core,” Acta Mech. Sinica., 31, No. 1, 113–118 (1999).
W. E. Warren and A. M. Kraynik, “Foam mechanics: the linear elastic response of two-dimensional spatially periodic cellular materials,” Mech. Mater., 6, No. 1, 27–37 (1987).
Y. Chen, R. Das, and M. Battley, “Response of honeycombs subjected to in-plane shear,” J. Appl. Mech., 83, No. 6, 061004 (2016).
A. J. Wang and D. L. Mcdowell, “In-plane stiffness and yield strength of periodic metal honeycombs,” J. Eng. Mater. Technol., 126, No. 2, 137–156 (2004).
S. Balawi and J. L. Abot, “A refined model for the effective in-plane elastic moduli of hexagonal honeycombs,” Compos. Struct., 84, No. 2, 147–158 (2008).
S. Balawi and J. L. Abot, “The effect of honeycomb relative density on its effective in-plane elastic moduli: An experimental study,” Compos. Struct., 84, No. 4, 293–299 (2008).
D. Mousanezhad, H. Ebrahimi, B. Haghpanah, et al., “Spiderweb honeycombs,” Int. J. Solids Struct., 66, 218–227 (2015).
A. Ajdari, B. H. Jahromi, J. Papadopoulos, et al., “Hierarchical honeycombs with tailorable properties,” Int. J. Solids Struct., 49, No. 11–12, 1413–1419 (2012).
Y. Sun and N. M. Pugno, “In plane stiffness of multifunctional hierarchical honeycombs with negative Poisson’s ratio sub-structures,” Compos. Struct., 106, 681–689 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Prykladna Mekhanika, Vol. 58, No. 3, pp. 132–143, May–June 2022.
* This work is supported by The National Natural Science Foundation of China (51305232). The Key Projects of Science and Technology Research Plan in Education Department of Hubei Province (D20181206) and The Key Laboratory of Hydroelectric Machinery Design & Maintenance, China Three Gorges University.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, X., He, R., Xu, X. et al. Innovative Design and Equivalent Mechanical Properties of a New Combined Honeycomb Structure*. Int Appl Mech 58, 361–372 (2022). https://doi.org/10.1007/s10778-022-01161-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-022-01161-2