Abstract
A technique is proposed to allow for damages and different tensile and compressive moduli of orthotropic materials in stress-strain analysis of compound bodies of revolution under nonaxisymmetric loading and heating. The technique combines the semi-analytic finite-element method and the method of successive approximations
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. A. Ambartsumyan, Theory of Elasticity with Different Tensile and Compressive Moduli [in Russian], Nauka, Moscow (1982).
V. A. Bazhenov and A. I. Gulyar, “Semianalytic finite-element method in problems of nonlinear continuum mechanics,” Int. Appl. Mech., 39, No. 4, 402–437 (2003).
Ya. M. Grigorenko, Yu. N. Shevchenko, V. G. Savchenko, et al., Numerical Methods, Vol. 11 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (2002).
Yu. N. Rabotnov and S. T. Mileiko, Short-Term Creep [in Russian], Nauka, Moscow (1970).
V. G. Savchenko, “A method of describing damages of a material in the nonaxisymmetric thermostress analysis of orthotropic solids of revolution,” in: System Technologies [in Ukrainian], 2(25), Dnipropetrovsk (2003), pp. 134–138.
V. G. Savchenko, “Nonaxisymmetric thermostress state of compound solids of revolution made of elastic orthotropic materials with different elastic moduli in tension and compression,” in: System Technologies [in Ukrainian], 4(33), Dnipropetrovsk (2004), pp. 39–44.
V. G. Savchenko and Yu. N. Shevchenko, “Spatial thermoviscoplastic problems,” Int. Appl. Mech., 36, No. 11, 1399–1433 (2000).
S. Simamura (ed.), Carbon Fibers [in Japanese], Omsya, Tokio (1984).
L. P. Khoroshun and E. N. Shikula, “Short-term damage micromechanics of laminated fibrous composites under thermal actions,” Int. Appl. Mech., 38, No. 9, 1083–1093 (2002).
Yu. N. Shevchenko and V. N. Mazur, “Solution of plane and axisymmetric boundary-value problems of thermoviscoplasticity with allowance for creep damage to the material,” Int. Appl. Mech., 22, No. 8, 695–704 (1986).
Yu. N. Shevchenko and V. G. Savchenko, Thermoviscoplasticity, Vol. 2 of the five-volume series Mechanics of Coupled Fields in Structural Members [in Russian], Naukova Dumka, Kyiv (1987).
H. Altenbach, “Topical problems and applications of creep theory,” Int. Appl. Mech., 39, No. 6, 631–655 (2003).
A. Baltov, “Materials sensitive to the type of the process,” Int. Appl. Mech., 40, No. 4, 361–369 (2004).
V. A. Bazhenov, A. I. Gulyar, and S. O. Piskunov, “Modeling creep and continuous fracture process zones in spatial prismatic bodies,” Int. Appl. Mech., 41, No. 9, 1016–1030 (2005).
A. Z. Galishin, “Determining the thermoviscoplastic state of shells of revolution subject to creep damage,” Int. Appl. Mech., 40, No. 5, 537–545 (2004).
R. M. Jones, “Stress-strain relations for materials with different moduli in tension and compression,” AIAA J., 15, No. 1, 16–23 (1977).
L. P. Khoroshun and E. N. Shikula, “Deformation of particulate composite with physically nonlinear inclusions and microdamageable matrix,” Int. Appl. Mech., 41, No. 2, 111–117 (2005).
L. P. Khoroshun and E. N. Shikula, “Influence of the physical nonlinearity of the matrix on the deformation of a particulate composite with microdamageable inclusion,” Int. Appl. Mech., 41, No. 4, 345–351 (2005).
V. G. Savchenko, “Numerical nonaxisymmetric thermostress analysis of compound solids of revolution with damage,” Int. Appl. Mech., 40, No. 3, 275–282 (2004).
V. G. Savchenko, “Nonaxisymmetric deformation of solids of revolution made of elastic orthotropic materials with different tensile and compressive moduli,” Int. Appl. Mech., 41, No. 7, 748–756 (2005).
V. G. Savchenko and Yu. N. Shevchenko, “Nonaxisymmetric thermal stress state of laminated rotational bodies of orthotropic materials under nonisothermic loading,” Mech. Comp. Mater., 40, No. 6, 473–488 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 42, No. 11, pp. 57–68, November 2006.
Rights and permissions
About this article
Cite this article
Savchenko, V.G. Stress state of compound solids of revolution made of damaged orthotropic materials with different tensile and compressive moduli. Int Appl Mech 42, 1246–1255 (2006). https://doi.org/10.1007/s10778-006-0195-8
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0195-8