Abstract
A catalyst-free, one-pot, three-component condensation procedure for the synthesis of novel isoxazolo[5,4-b]pyridine derivatives has been reported by condensation of isatins, 3-methylisoxazol-5-amine, and cyclic enolizable carbonyl compounds in ethylene glycol at 80 °C. The structures of the synthesized compounds have been confirmed by spectral and X-ray studies. Crystal packing of one compound has also been reported. Less reaction time, easy work-up, and high yields are the important features of the present protocol.
Graphical abstract
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Multicomponent reactions (MCRs), reactions [1] can be used to overcome the challenge of synthesizing compounds having structural complexity, diversity and having promising biological properties by designing efficient reaction methodologies. The MCR one-pot procedures are of interest as they are low cost, being environmentally benign and have high atom efficiency [2].
Spiro compounds display a wide array of biological applications such as antidiabetic [3], antimycobacterial [4], antimicrobial [5], anticholinesterase [6], anticancer [7], etc. Spirocyclic compounds also belong to the category of fluorescent chemosensors, as they induce brilliant coloration on irradiation [8,9,10]. In particular, spirooxindoles are of great interest because of their prevalence in numerous natural products and biologically active synthetic molecules [11,12,13,14,15]. The spiro ring fused at the C3 position of the oxindole core with varied heterocyclic motifs is the key structural characteristic of these compounds. Natural occurring spirooxindole alkaloids, viz., spirotryprostatins have been reported to show anticancer activity [16]. In addition to the naturally occurring spirooxindoles, a synthetic derivative, MI-888 is in preclinical trials for the treatment of human cancers [17]. In view of the excellent biological activity of spirooxindole hybrids, development of new methodologies for the synthesis of novel spirooxindole hybrids is imperative for the pharmaceutical industry.
In our endeavor of exploring new synthetic strategies for the synthesis of various kind of heterocycles [18,19,20,21,22,23], herein we decided to investigate the synthesis of novel spirooxindole derivatives by one-pot multicomponent reaction of indane-1,3-dione, isatin, and 3-methylisoxazol-5-amine.
Results and discussion
We report herein a facile and efficient one-pot synthesis of novel spiroisooxazoles, namely, 3-methylspiro[indeno[2,1-e]isoxazolo[5,4-b]pyridine-4,3′-indoline]-2′,5(10H)-dione derivatives 4a–4e by catalyst-free three-component condensation of isatins 1, 3-methylisoxazol-5-amine (2), and indane-1,3-dione (3a); synthesis of novel 8-methylspiro[chromeno[3,4-e]isoxazolo[5,4-b]pyridine-7,3′-indoline]-2′,6(11H)-diones 5a–5f via condensation of isatins 1, 3-methylisoxazol-5-amine (2), and 4-hydroxycoumarin (3b), and synthesis of novel 3-methyl-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione derivatives 6a–6e by condensation of isatins 1, 3-methylisoxazol-5-amine (2), and 2-hydroxy-1,4-naphthoquinone (3c) in ethylene glycol at 80 °C.
The reactions of isatin (1, 1.0 mmol), 3-methylisoxazol-5-amine (2, 1.0 mmol), and indane-1,3-dione (3a, 1.0 mmol) initially attempted in various protic solvents under catalyst free conditions to identify appropriate reaction conditions. Firstly, the reaction was attempted in water at 80 °C, but there was no reaction even after 24 h (Table 1, entry 1). The same reaction carried out using glycerol as solvent at 80 °C showed formation of a new product though it was incomplete even after 24 h. The new product was separated and identified as desired 3-methylspiro[indeno[2,1-e]isoxazolo[5,4-b]pyridine-4,3′-indoline]-2′,5(10H)-dione (4a) in 27% yield (Table 1, entry 2; Scheme 1).
The reactions were then performed in PEG-400, PEG-600, and methanol at 80 °C. The reactions were incomplete even after 24 h but gave 42, 38, and 37% of the product 4a, respectively (Table 1, entries 3–5). The same reaction when attempted using ethylene glycol at 80 °C was complete in 20 min and yielded 92% of the desired product 4a (Table 1, entry 6). The reaction in ethylene glycol was also attempted at 60 and 100 °C. While the reaction at 60 °C was incomplete even after 24 h and gave 62% yield of the desired product 4a (Table 1, entry 7), the reaction attempted at 100 °C did not show any significant difference in reaction time and yield of the product (Table 1, entry 8). Ionic liquids [bmim]Br and [bmim]BF4 were also used as reaction medium under identical conditions. The reaction was complete in [bmim]Br after 24 h and yielded 88% of 4a (Table 1, entry 9) while in [bmim]BF4 there was no reaction even after 24 h (Table 1, entry 10).
Therefore, it can be inferred from the above results that a catalyst-free one-pot three-component condensation of isatin (1.0 mmol), 3-methylisoxazol-5-amine (1.0 mmol), and indane-1,3-dione (1.0 mmol) in ethylene glycol at 80 °C is the optimum condition for the synthesis of spirooxindoles. Subsequently, reactions of different isatins 1 and 3-methylisoxazol-5-amine (2) were attempted with indane-1,3-dione (3a), 4-hydroxycoumarin (3b), and 2-hydroxy-1,4-naphthoquinone (3c) under the optimized conditions. All the reactions proceeded smoothly and were complete in 20–240 min affording the corresponding 3-methylspiro[indeno[2,1-e]isoxazolo[5,4-b]pyridine-4,3′-indoline]-2′,5(10H)-dione derivatives 4a–4e, 8-methylspiro[chromeno[3,4-e]isoxazolo[5,4-b]pyridine-7,3′-indoline]-2′,6(11H)-diones 5a–5f, and 3-methyl-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione derivatives 6a–6e in high yields (Scheme 2). All the results have been compiled in Table 2. Structural assignments have been made on the basis of 1H NMR, 13C NMR, IR, and mass spectra.
1H NMR spectra of compound 4a showed a singlet at δ = 1.55 ppm for three methyl protons, one N–H proton appeared at 1.89 ppm and eight aromatic protons appeared in the range of 6.90–7.61 ppm and 1 N–H proton appeared as a singlet at 10.70 ppm. The methyl carbon in 13C NMR appeared at δ = 9.02 ppm and one quaternary carbon appeared at 46.68 ppm. The 15 aromatic carbons and 2 olefinic carbons appeared in the range of 96.00–161.63 ppm. Two carbonyl carbons appeared at 177.70 and 189.33 ppm. IR spectra showed peaks at 3331 and 3310 cm−1 (N–H stretch) and 1692 and 1672 cm−1 (carbonyl stretch). Mass spectrum of 4a showed a molecular ion peak at m/z = 356.1039 ([M + H]+).
The structure of the synthesized novel 3-methylspiro[indeno[2,1-e]isoxazolo[5,4-b]pyridine-4,3′-indoline]-2′,5(10H)-dione (4a) has been confirmed by the single crystal X-ray diffraction analysis (Fig. 1 left). A single crystal of 4a suitable for X-ray diffraction was obtained by solution of the compound in DMSO at room temperature. The crystal packing shows two molecules in a unit cell (Fig. 1 right).
A probable mechanism involved in the formation of products is outlined in Scheme 3. The condensation of isatin and 3-methylisoxazol-5-amine gives intermediate 7 via dehydration of 6. The intermediate 7 reacts with indane-1,3-dione to give intermediate 8 which undergoes intramolecular cyclisation to give 9 followed by loss of water to give the final product 4.
Conclusion
In conclusion, we have developed an eco-friendly catalyst-free methodology for the synthesis of novel isoxazolo[5,4-b]pyridine derivatives via reactions of isatins, 3-methylisoxazol-5-amine, and cyclic enolizable carbonyl compounds in ethylene glycol at 80 °C. The advantages of this protocol are environmentally benign conditions and high atom-economy. All the compounds were obtained in high yields.
Experimental
All the chemicals were commercial and purchased from Sigma-Aldrich or Merck and used as received. Thin layer chromatography (GF254) was used to monitor reaction progress. Melting points were measured on Buchi M-560 melting point apparatus. IR (KBr) spectra were recorded on a Perkin-Elmer FTIR spectrophotometer and the values are expressed in cm−1. The 1H NMR and 13C NMR spectra were recorded on Jeol JNM ECX-400P at 400 and 100 MHz respectively, using TMS as an internal standard. The chemical shift values are recorded on δ scale and the coupling constants (J) are in Hz. Mass spectral data were recorded on a Bruker Micro TOFQ–II mass spectrometer.
X-ray data collection and refinement
The intensity data for compound 4a were collected on an Oxford Xcalibur CCD diffractometer equipped with graphite monochromatic MoKα radiation (λ = 0.71073 Å) at 293(2) K. A multiscan absorption correction was applied. The structure was solved by direct methods and refined by full-matrix least squares refinement techniques on F2 using SHELXL-97 [24]. The coordinates of non-hydrogen atoms were refined anisotropically using SHELXL-97. The positions of hydrogen atoms were obtained from difference Fourier maps and were included in the final cycles of refinement. All calculations were done using the WinGX software package [25]. Complete crystallographic data (excluding factors) of 4a have been deposited at the Cambridge Crystallographic Data Centre under number CCDC 1520597.
General procedure for the synthesis of isoxazolo[5,4-b]pyridine derivatives
A mixture of isatin (1.0 mmol), 3-methylisoxazol-5-amine (1.0 mmol), cyclic enolizable carbonyl compound (1.0 mmol), and 3 cm3 ethylene glycol was placed in a 50 cm3 round-bottomed flask and the contents were stirred magnetically in an oil-bath maintained at 80 °C for the appropriate time as indicated in Table 2. The progress of the reaction was monitored by TLC using ethyl acetate/petroleum ether (30:70, v/v) as eluent. After completion of the reaction, the reaction mixture was allowed to cool at room temperature and diluted with 5 cm3 water. The solid separated was collected by filtration at the pump and washed with water. The products were purified by recrystallizing from ethanol. The products were characterized by 1H NMR, 13C NMR, DEPT, IR, mass spectra, and an X-ray crystallographic study.
3-Methylspiro[indeno[1,2-b]isoxazolo[4,5-e]pyridine-4,3′-indoline]-2′,5(10H)-dione (4a, C21H13N3O3)
Orange solid; yield: 92%; m.p.: 250 °C (decomp.); Rf = 0.07 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.70 (s, 1H, CONH), 7.61–7.59 (m, 1H, Ar), 7.51 (t, J = 7.6 Hz, 1H, Ar), 7.39 (t, J = 7.6 Hz, 1H, Ar), 7.25–7.20 (m, 2H, Ar), 7.08–7.06 (m, 1H, Ar), 6.93–6.90 (m, 2H, Ar) 1.89 (s, 1H, NH), 1.55 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 189.33, 177.70, 161.63, 157.84, 156.55, 141.44, 135.86, 133.69, 133.21, 132.44, 130.96, 128.91, 124.64, 122.42, 120.99, 119.81, 109.56, 106.26, 96.00, 46.68, 9.02 ppm; IR (KBr): \(\bar{\nu }\) = 3331, 3310, 1692, 1672 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 356.1035, found 356.1039.
5′-Bromo-3-methylspiro[indeno[1,2-b]isoxazolo[4,5-e]pyridine-4,3′-indoline]-2′,5(10H)-dione (4b, C21H12BrN3O3)
Orange solid; yield: 91%; m.p.: 267 °C (decomp.); Rf = 0.08 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ =10.85 (s, 1H, CONH), 7.61–7.49 (m, 2H, Ar), 7.41–7.36 (m, 3H, Ar), 7.26–7.24 (m, 1H, Ar), 6.89–6.87 (m, 1H, Ar), 1.89 (s, 1H, NH), 1.59 (s, 3H, CH3) ppm; IR (KBr): \(\bar{\nu }\) = 3293, 1698, 1676 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 434.0140, found 434.0117, 436.0159 ([M + H + 2]+).
3-Methyl-5′-nitrospiro[indeno[1,2-b]isoxazolo[4,5-e]pyridine-4,3′-indoline]-2′,5(10H)-dione (4c, C21H12N4O5)
Orange solid; yield: 92%; m.p.: 286–288 °C; Rf = 0.06 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 11.45 (s, 1H, CONH), 8.23 (dd, J = 2.0, 8.8 Hz, 1H, Ar), 8.096–8.093 (m, 1H, Ar), 7.63 (d, J = 7.2 Hz, 1H, Ar), 7.53 (t, J = 7.6 Hz, 1H, Ar), 7.41 (t, J = 6.8 Hz, 1H, Ar), 7.21–7.24 (m, 1H, Ar), 7.14 (d, J = 9.2 Hz, 1H, Ar), 1.60 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 189.27, 178.25, 162.13, 157.65, 157.13, 147.83, 143.03, 135.82, 134.38, 133.17, 132.52, 131.12, 126.36, 121.10, 120.70, 120.13, 109.86, 105.06, 94.88, 46.70, 9.17 ppm; IR (KBr): \(\bar{\nu }\) = 3282, 1706, 1672 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 401.0886, found 401.0882.
5′-Chloro-3-methylspiro[indeno[1,2-b]isoxazolo[4,5-e]pyridine-4,3′-indoline]-2′,5(10H)-dione (4d, C21H12ClN3O3)
Orange solid; yield: 91%; m.p.: 293–295 °C; Rf = 0.08 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.82 (s, 1H, CONH), 7.58–7.56 (m, 1H, Ar), 7.49–7.46 (m, 1H, Ar), 7.38–7.46 (m, 1H, Ar), 7.25–7.21 (m, 3H, Ar), 6.89 (d, J = 8 Hz, 1H, Ar), 1.56 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): 189.26, 177.44, 161.84, 157.67, 156.84, 140.33, 132.44, 131.02, 128.85, 124.94, 121.02, 119.90, 110.99, 105.61, 95.44, 46.88, 9.06 ppm; IR (KBr): \(\bar{\nu }\) = 3316, 3064, 1678, 1650 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 390.0641, found 390.0642.
1′-Allyl-3-methylspiro[indeno[1,2-b]isoxazolo[4,5-e]pyridine-4,3′-indoline]-2′,5(10H)-dione (4e, C24H17N3O3)
Orange solid; yield: 89%; m.p.: 264–265 °C; Rf = 0.07 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 7.59–7.57 (m, 1H, Ar), 7.50 (t, J = 7.2 Hz, 1H, Ar), 7.38–7.34 (m, 1H, Ar), 7.28–7.21 (m, 2H, Ar), 7.13–7.12 (m, 1H, Ar), 7.01–6.95 (m, 2H, Ar), 5.91–5.81 (m, 1H, =CH), 5.49–5.44 (m, 1H, =CH2), 5.19 (d, J = 10 Hz, 1H, =CH2), 4.47–4.42 (m, 1H, –CH2), 4.31–4.26 (m, 1H, –CH2), 1.45 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 189.19, 175.71, 161.75, 157.72, 156.70, 141.96, 135.80, 133.16, 132.77, 132.47, 131.50, 131.03, 128.93, 124.46, 123.09, 121.03, 119.87, 117.41, 109.12, 105.89, 95.76, 46.29, 42.11, 9.14 ppm; IR (KBr): \(\bar{\nu }\) = 3070, 1675, 1663 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 396.1348, found 396.1343.
8-Methylspiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5a, C21H13N3O4)
White solid; yield: 89%; m.p.: 295–297 °C; Rf = 0.05 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.65 (s, 1H, CONH), 8.21 (d, J = 7.6 Hz, 1H, Ar), 7.70 (t, J = 7.6 Hz, 1H, Ar), 7.47–7.39 (m, 2H, Ar), 7.19 (t, J = 7.6 Hz, 1H, Ar), 7.05–7.03 (m, 1H, Ar), 6.89–6.84 (m, 2H, Ar), 1.86 (s, 1H, NH), 1.56 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 178.22, 160.04, 159.13, 157.23, 152.14, 145.06, 141.59, 135.13, 133.01, 128.72, 124.57, 124.14, 123.29, 122.26, 116.96, 112.96, 109.27, 98.76, 93.46, 49.41, 8.92 ppm; IR (KBr): \(\bar{\nu }\) = 3350, 3154, 1697, 1686 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 372.0984, found 372.0981.
5′-Bromo-8-methylspiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5b, C21H12BrN3O4)
White solid; yield: 90%; m.p.: 267–269 °C; Rf = 0.10 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.77 (s, 1H, CONH), 8.22 (bs, 1H, Ar), 7.67 (s, 1H, Ar), 7.44–7.33 (m, 4H, Ar), 6.83 (bs, 1H, Ar), 1.60 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 177.90, 160.26, 159.30, 157.09, 152.18, 145.43, 140.93, 137.27, 133.10, 131.50, 127.20, 124.61, 123.38, 117.02, 113.97, 113.07, 111.24, 98.21, 92.94, 49.61, 8.99 ppm; IR (KBr): \(\bar{\nu }\) = 3501, 3226, 1700, 1690 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 450.0089, found 450.0085.
8-Methyl-5′-nitrospiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5c, C21H12N4O6)
White solid; yield: 89%; m.p.: 287–289 °C; Rf = 0.06 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.86 (s, 1H, CONH), 7.59–7.25 (m, 6H, Ar), 6.87 (bs, 1H, Ar), 1.59 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 178.81, 160.55, 159.49, 157.70, 152.21, 148.08, 145.81, 142.91, 135.72, 133.21, 126.20, 124.68, 123.50, 120.30, 117.06, 109.50, 97.76, 92.38, 49.50, 9.07 ppm; IR (KBr): \(\bar{\nu }\) = 3333, 3226, 1720, 1681 cm−1: HRMS (ESI): m/z calc. for [M + H]+ 417.0835, found 417.0825.
5′-Chloro-8-methylspiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5d, C21H12ClN3O4)
White solid; yield: 90%; m.p.: 286–290 °C; Rf = 0.08 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.81 (s, 1H, CONH), 8.21 (d, J = 7.6 Hz, 1H, Ar), 7.69 (t, J = 7.6 Hz, 1H, Ar), 7.46–7.38 (m, 2H, Ar), 7.23–7.22 (m, 2H, Ar), 6.87 (d, J = 8.4 Hz, 1H, Ar), 1.60 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 178.04, 160.27, 159.30, 157.10, 152.19, 145.42, 140.53, 136.92, 133.09, 128.65, 126.28, 124.60, 124.52, 123.37, 117.00, 113.06, 110.71, 98.21, 92.93, 49.69, 8.99 ppm; IR (KBr): \(\bar{\nu }\) = 3596, 3198, 1709, 1683 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 406.0595, found 406.0584.
8-Methyl-1′-(prop-2-yn-1-yl)spiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5e, C24H15N3O4)
White solid; yield: 88%; m.p.: 295–296 °C; Rf = 0.15 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 8.22 (d, J = 8.4 Hz, 1H, Ar), 7.69 (t, J = 7.6 Hz, 1H, Ar), 7.47–7.29 (m, 3H, Ar), 7.14 (d, J = 7.2 Hz, 2H, Ar), 7.01 (t, J = 7.6 Hz, 1H, Ar), 4.75–4.70 (m, 1H, CH2), 4.52–4.48 (m, 1H, CH2), 3.29 (s, 1H, CH), 1.52 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 175.66, 160.13, 159.11, 157.25, 152.16, 145.24, 141.11, 134.06, 133.14, 128.82, 124.64, 124.12, 123.37, 123.34, 117.01, 112.92, 108.78, 98.22, 93.15, 77.75, 74.73, 49.13, 29.26, 9.21 ppm; IR (KBr): \(\bar{\nu }\) = 3238, 1711, 1683 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 410.1141, found 410.1107.
1′-Allyl-8-methylspiro[chromeno[4,3-b]isoxazolo[4,5-e]pyridine-7,3′-indoline]-2′,6(11H)-dione (5f, C24H17N3O4)
White solid; yield: 89%; m.p.: 266–269 °C; Rf = 0.13 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 8.22 (d, J = 7.6 Hz, 1H, Ar), 7.69 (t, J = 7.6 Hz, 1H, Ar), 7.47–7.37 (m, 2H, Ar), 7.27 (t, J = 7.6 Hz, 1H, Ar), 7.13 (d, J = 6.8 Hz, 1H, Ar), 6.99–6.93 (m, 2H, Ar), 5.89–5.82 (m, 1H, CH), 5.51–5.46 (m, 1H, CH2), 5.21–5.18 (m, 1H, CH2), 4.43–4.30 (m, 2H, CH2), 1.47 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 176.25, 160.13, 159.10, 157.13, 152.13, 145.20, 142.16, 134.22, 133.10, 131.76, 128.74, 124.61, 123.98, 123.34, 122.93, 118.03, 116.97, 112.93, 108.79, 98.47, 93.25, 49.03, 42.34, 9.08 ppm; IR (KBr): \(\bar{\nu }\) = 3142, 1709, 1672 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 412.1297, found 412.1288.
3-Methyl-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione (6a, C22H13N3O4)
Dark red solid; yield: 87%; m.p.: 262 °C; Rf = 0.10 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.72 (s, 1H, CONH), 8.06–8.05 (m, 1H, Ar), 7.81–7.78 (m, 3H, Ar), 7.19–7.17 (m, 1H, Ar), 7.10–7.09 (m, 1H, Ar), 6.91–6.88 (m, 2H, Ar), 1.58 (s, 1H, NH), 1.05–1.01 (m, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 181.12, 179.24, 178.47, 159.84, 157.23, 141.23, 141.13, 136.06, 135.24, 133.60, 131.56, 130.12, 128.69, 126.26, 125.96, 124.33, 122.23, 115.75, 109.30, 90.00, 49.90, 8.98 ppm; IR (KBr): \(\bar{\nu }\) = 3148, 1700, 1658 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 384.0984, found 384.0979.
3-Methyl-5′-nitro-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione (6b, C22H12N4O6)
Dark red solid; yield: 87%; m.p.: 219–221 °C; Rf = 0.01 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 11.44 (s, 1H, CONH), 8.17–8.02 (m, 3H, Ar), 7.77–7.76 (m, 3H, Ar), 7.10 (d, J = 9.2 Hz, 1H, Ar), 1.61 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 181.37, 179.11, 179.01, 160.33, 157.07, 147.59, 142.86, 141.93, 136.48, 135.17, 133.70, 131.49, 130.33, 126.32, 126.19, 126.01, 120.42, 114.56, 109.56, 93.03, 49.95, 9.17 ppm; IR (KBr): \(\bar{\nu }\) = 3114, 1714, 1658 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 429.0835, found 429.0830.
5′-Chloro-3-methyl-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione (6c, C22H12ClN3O4)
Dark red solid; yield: 84%; m.p.: 224–227 °C; Rf = 0.08 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 10.8 (s, 1H, NH), 8.07–8.02 (m, 1H, Ar), 7.81–7.75 (m, 3H, Ar), 7.28–7.22 (m, 2H, Ar), 6.92 (d, J = 8.4 Hz, 1H, Ar), 1.68 (s, 1H, NH), 1.63 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 181.27, 179.21, 178.29, 160.04, 157.15, 141.54, 140.09, 137.77, 135.26, 133.79, 131.57, 130.25, 128.64, 126.30, 124.70, 115.11, 110.80, 93.54, 50.16, 9.09 ppm; IR (KBr): \(\bar{\nu }\) = 3490, 3221, 1706, 1690 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 418.0595, found 418.0591.
3-Methyl-1′-(prop-2-yn-1-yl)-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione (6d, C25H15N3O4)
Dark red solid; yield: 84%; m.p.: 246–249 °C; Rf = 0.26 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 8.05–8.01 (m, 1H, Ar), 7.78–7.77 (m, 3H, Ar), 7.35–7.33 (m, 1H, Ar), 7.21–7.14 (m, 2H, Ar), 7.00 (s, 1H, Ar), 4.81–4.76 (m, 1H, –CH), 4.60–4.56 (m, 1H, –CH2), 3.35 (s, 1H, –CH2), 1.56 (s, 1H, NH), 1.55 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 181.07, 179.09, 175.85, 159.90, 157.22, 141.35, 140.61, 135.18, 134.89, 133.63, 131.43, 130.15, 128.78, 126.28, 125.97, 124.33, 123.29, 115.14, 108.80, 93.68, 77.73, 74.84, 49.54, 29.29, 9.26 ppm; IR (KBr): \(\bar{\nu }\) = 3277, 1703, 1683, 1676 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 422.1141, found 422.1096.
1′-Allyl-3-methyl-5H-spiro[benzo[g]isoxazolo[5,4-b]quinoline-4,3′-indoline]-2′,5,10(11H)-trione (6e, C25H17N3O4)
Dark red solid; yield: 86%; m.p.: 254–256 °C; Rf = 0.28 (30% ethyl acetate/petroleum ether); 1H NMR (400 MHz, DMSO-d6): δ = 8.07–8.02 (m, 1H, Ar), 7.81–7.76 (m, 3H, Ar), 7.29–7.25 (m, 1H, Ar), 7.18–7.17 (m, 1H, Ar), 7.06–7.04 (m, 1H, Ar), 6.99–6.94 (m, 1H, Ar), 5.98–5.86 (m, 1H, CH), 5.63–5.51 (m, 1H, CH2), 5.30–5.24 (m, 1H, CH2), 4.52–4.33 (m, 2H, CH2), 1.55 (s, 1H, NH), 1.51 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 181.10, 179.15, 176.47, 159.91, 157.11, 141.68, 141.33, 135.20, 135.09, 133.62, 131.84, 131.49, 130.12, 128.70, 126.27, 126.01, 124.21, 122.91, 118.31, 115.40, 108.83, 93.79, 49.48, 42.41, 9.17 ppm; IR (KBr): \(\bar{\nu }\) = 3271, 1706, 1669 cm−1; HRMS (ESI): m/z calc. for [M + H]+ 424.1297, found 424.1291.
References
Domling A (2006) Chem Rev 17:106
Ali A, Correa AG, Alves D, Zukerman-Schpector J, Westermann B, Ferreira MAB, Paixao MW (2014) Chem Commun 50:11926
Murugan R, Anbazhagan S, Narayanan SS (2009) Eur J Med Chem 44:3272
Maheswari SU, Balamurugan K, Perumal S, Yogeeswari P, Sriram D (2010) Bioorg Med Chem Lett 20:7278
Karthikeyan K, Sivakumar PM, Doble M, Perumal PT (2010) Eur J Med Chem 45:3446
Kia Y, Osman H, Kumar RS, Murugaiyah V, Basiri A, Perumal S, Wahab HA, Bing CS (2013) Bioorg Med Chem 21:1696
Arun Y, Bhaskar G, Balachandran C, Ignacimuthu S, Perumal PT (2013) Bioorg Med Chem Lett 23:1839
Chen XQ, Pradhan T, Wang F, Kim JS, Yoon J (2012) Chem Rev 112:1910
Berkovic G, Krongauz V, Weiss V (2000) Chem Rev 100:1741
Lee CK, Davis DA, White SR, Moore JS, Sottos NR, Braun PV (2010) J Am Chem Soc 132:16107
Ye N, Chen H, Wold EA, Shi PY, Zhou J (2016) ACS Infect Dis 2:382
Pavlovska TL, Redkin RG, Lipson VV, Atamanuk DV (2016) Mol Divers 20:299
Yu B, Zheng YC, Shi XJ, Qi PP, Liu HM (2016) Anti Cancer Agents Med Chem 16:1315
Yu B, Yu DQ, Liu HM (2015) Eur J Med Chem 97:673
Galliford CV, Scheidt KA (2007) Angew Chem Int Ed 46:8748
Edmonson S, Danishefsky SJ, Sepp-Lorenzino L, Rosen N (1999) J Am Chem Soc 121:2147
Zhao V, Yu V, Sun W, Liu L, Lu J, McEachern D, Shargary S, Bernard D, Li X, Zhao T, Zou P, Sun D, Wang S (2013) J Med Chem 56:5553
Gupta S, Khanna G, Khurana JM (2016) Environ Chem Lett 14:559
Gupta S, Saluja P, Khurana JM (2016) Tetrahedron 72:3986
Kumari S, Singh H, Khurana JM (2016) Tetrahedron Lett 57:3081
Khanna G, Saluja P, Khurana JM (2016) Tetrahedron Lett 57:5852
Kumari S, Rajeshwari M, Khurana JM (2016) Aust J Chem 69:1049
Saroha M, Khanna G, Khurana JM (2017) ChemistrySelect 2:7263
Sheldrick GM (2008) Acta Crystallogr 64:112
Farrugia LJ (2009) WinGX version 1.80.05: an integrated system of windows programs for the solution, refinement, and analysis of single crystal X-ray diffraction data. Department of Chemistry, University of Glasgow
Acknowledgements
K. M. thanks Dyal Singh College, DU, for the grant of Teacher Fellowship and S. K. thanks CSIR, New Delhi, India for JRF and SRF. Authors acknowledge University of Delhi for providing Research Grant and DST purse grant.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Meena, K., Kumari, S., Khurana, J.M. et al. An efficient catalyst-free approach for the synthesis of novel isoxazolo[5,4-b]pyridine derivatives via one-pot three-component reaction. Monatsh Chem 149, 1841–1848 (2018). https://doi.org/10.1007/s00706-018-2205-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00706-018-2205-z