Abstract
In this study, we determined the concentrations of polycyclic aromatic hydrocarbons (PAHs) in road dust from Myanmar, Japan, Taiwan, and Vietnam. PAHs were detected in urban and rural areas of Myanmar at mean concentrations of 630 ng/g dry weight and 200 ng/g dry weight, respectively. PAHs were also detected in road dust from Vietnam (mean 1700 ng/g) and Taiwan (2400 ng/g). PAH diagnostic ratios suggested that fossil fuel vehicular exhaust and biomass combustion are major sources of PAHs in road dust in Myanmar. Road dust samples from Japan, Taiwan, and Vietnam had similar PAH diagnostic ratios, implying that PAH sources are similar. We assessed the human health risks posed by PAHs in road dust using carcinogenic equivalents (CEQs) and incremental lifetime cancer risk (ILCR). Mean CEQs were decreased in the order Taiwan (173 ng/g) > Vietnam (162 ng/g for Hanoi) > Myanmar (42 and 31 ng/g for Yangon and Pathein, respectively) > Japan (30 ng/g for Kumamoto). Benz[a]pyrene, fluoranthene, and benzo[b]fluoranthene, the predominant PAHs, contributed > 70% of total CEQs. High ILCR values were found for Taiwan (5.9 × 10−4 and 9.9 × 10−4 for children and adults, respectively) and Vietnam (6.5 × 10−4 and 9.2 × 10−4 for children and adults, respectively, in Hanoi), indicating that PAHs in road dust pose cancer risks to the inhabitants of Taiwan and Hanoi. To our knowledge, this is the first report to identify PAH pollution in the environment and to evaluate the human health risks of these PAHs in Myanmar.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous pollutants that have been detected in a wide range of environmental matrices (Yunker et al. 2002; Wang et al. 1999; Nakata et al. 2014). PAHs have petrogenic and pyrogenic sources. Low molecular-weight PAHs and alkylated PAHs are found at high concentrations in mineral oils, making oil spills important petrogenic contributors of PAHs to the environment. Complex PAH mixtures containing high molecular weight PAHs are produced by pyrogenic sources through the incomplete combustion of organic material, such as coal, petroleum, and wood (Yunker et al. 2002). It is important to identify the sources of PAH emissions, to develop methods for controlling PAH pollution in the environment, and to minimize health risks to humans.
There are public health concerns about exposure to PAHs, because many of these compounds are carcinogenic and mutagenic. The U.S. Environmental Protection Agency (EPA) has classified 16 PAHs as priority pollutants (USEPA 1993). Benzo[a]pyrene (BaP), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene, and chrysene (Chry) are classed as carcinogenic or potentially carcinogenic chemicals by the International Agency for Research on Cancer. Several high molecular weight PAHs, including BaP, can bind to the aryl hydrocarbon receptor, which is associated with tumor production and increased oxidative stress; these PAHs are used as markers when evaluating the risks posed by PAHs to humans (Lin et al. 2002; Villeneuve et al. 2002). There are three main pathways through which humans are exposed to PAHs: ingestion, inhalation, and dermal contact. Incremental lifetime cancer risks (ILCRs) for PAHs, as defined by the USEPA (1991), have been used to evaluate the cancer risks posed to humans via exposure to PAHs through these pathways.
Monitoring studies of PAH contamination in road dust have been performed in developed and developing countries. Mean PAHs levels in road dust collected from Iran and Egypt were 330 ng/g (Saeedi et al. 2012) and 680 ng/g dry weight (dw) (Hassanien and Abdel-Latif 2008), respectively. In China, PAHs levels in road dust are 2400 ng/g dw in Shanghai (Jia et al. 2017), 3900 ng/g in Lanzhou (Jiang et al. 2014), and 4800 ng/g in Guangzhou (Wang et al. 2011). However, little information is available on the concentrations and distributions of various environmental pollutants in Myanmar, including PAHs and persistent organic pollutants.
Heavy metal pollution in Myanmar has been investigated in several recent studies. High arsenic concentrations (50–630 µg/L) have been found in well water in the Lower Ayeyarwady Basin of western Myanmar (Van Geen et al. 2014). Bacquart et al. (2015) determined the concentrations of 21 metals in 18 drinking water samples and found that concentrations of arsenic, fluoride, iron, manganese, and uranium in water from most wells in Myingyan Township in central Myanmar were higher than health-based reference values. Wai et al. (2018) determined heavy metal concentrations in human urine from Myanmar and suggested that telomere shortening occurs because of exposure to arsenic and cadmium. Concentrations of fine particles with a diameter of 2.5 μm or less (PM2.5) in the air of downtown Yangon City in Myanmar have recently been published; PM2.5 concentrations were higher than the US EPA national ambient air quality standard of 35 μg/m3 at all sampling sites (Yi et al. 2018). PM2.5 pollution caused by traffic and PAH concentrations in road dust have been found to be related. High molecular weight PAHs have been identified at high concentrations in PM2.5 and particulate matter with a diameter of 10 μm or less (PM10) (Khan et al. 2017; Alves et al. 2017), but no data are available for PAH concentrations in Myanmar.
Road dust is a suitable matrix for monitoring PAH pollution. Road dust is a complex mixture of particles in the exhaust emitted from motor vehicles, particles produced from vehicle tires, liquids (e.g., lubricating oils and fuel) that have spilled or leaked from vehicles, and particles produced by road surface erosion. High concentrations of PAHs and other toxic chemicals have been found in road dust. In previous studies, PAH concentrations and distribution have been determined in road dust from Australia (Nguyen et al. 2014), China (Wang et al. 2011), Korea (Lee and Dong 2010), Tokyo (Takada et al. 1991; Khanal et al. 2018), and Vietnam (Tuyen et al. 2014). Road dust from urban and industrial areas in these countries has generally been found to be severely polluted with PAHs.
In this study, we determined PAH concentrations in samples of road dust and sediment collected in Myanmar during 2014 and 2016. We sought to investigate the concentrations, distributions, and sources of PAHs in the environment in Myanmar and to assess the risks posed by PAHs to the inhabitants of that country. Road dust samples collected in Japan, Taiwan, and Vietnam between 2012 and 2018 were also analyzed to assess PAH pollution and the toxicological implications of PAH exposure in different parts of Asia.
Materials and Methods
Chemicals Analyzed
We analyzed the concentrations of 19 PAHs: acenaphthylene, acenaphthene, fluorene, phenanthrene (Phe), anthracene, fluoranthene (Flth), pyrene (Py), benz[a]anthracene, Chry, BbF, benzo[k]fluoranthene, benzo[e]pyrene, BaP, perylene (Pery), indeno[1,2,3-cd]pyrene (IcdP), benzo[g,h,i]perylene (BghiP), dibenz[a,h]anthracene (DahA), picene, coronene, and dibenzothiophene. Naphthalene was detected in some samples but also in every blank sample, so naphthalene data were excluded from interpretation.
Sample Collection
Fifty-one road dust samples were collected in Myanmar on three occasions during 2014 and 2016. Samples were collected from the cities of Yangon and Pathein (urban areas) and Bagan, Chaungthar, Myingyan, and Wundwin towns (rural areas), as well as from the suburbs of these towns and cities. Yangon was previously the capital city of Myanmar and has a population of more than four million people. Twenty-two sediment samples were also collected near the Myanmar road dust sampling sites on two occasions during 2014 and 2015 to investigate the present status of pollution and potential sources of PAHs in the country (Table SI-1). Road dust samples were also collected from Hanoi and Halong cities in Vietnam during 2012 (n = 9), Kumamoto City in Japan during 2017 (n = 16), and Tainan City in Taiwan during 2018 (n = 10). The sampling site locations are shown in Fig. 1, and information on the road dust and sediment samples is given in Tables SI-1 and SI-2, respectively. Each road dust sample was collected from the edge of a road, adjacent to the asphalt, using a clean brush and dustpan. Sediment samples were collected from a river or lake using an Ekman–Berge grab sampler. Each sample was placed in a clean plastic bag and stored at − 20 °C until analysis.
Analytical Procedures
PAH concentrations in the samples were determined using a previously described procedure (Nakata et al. 2014). Each road dust sample was passed through a 500-μm sieve, then 3–10 g of the sample was extracted using a 1:1 v/v mixture of dichloromethane and n-hexane, with ultrasonication. The extract was evaporated to a small volume, then deuterated PAH surrogate standards (acenaphthene-d10, phenanthrene-d10, chrysene-d12, and perylene-d14) were added. The extract was then cleaned using gel permeation chromatography (Bio-Beads S-X3; Bio-Rad Laboratories, Hercules, CA) using a 1:1 v/v mixture of dichloromethane and hexane as the mobile phase at a flow rate of 5 mL/min. After concentration of the eluent, the sample was spiked into a silica gel chromatography column (Wakogel C200; FUJIFILM Wako Pure Chemical Corporation, Japan) using hexane as the mobile phase for cleaning. The eluate was evaporated to < 100 µL using a rotary evaporator and then under a gentle steam of nitrogen; then, 13C-pentachlorobiphenyl was added to act as an internal standard. Sediment samples were not passed through a sieve but were otherwise processed following the same procedure. PAH concentrations in the extracts were determined using a 7890A gas chromatograph coupled to a 5975C mass spectrometer (Agilent Technologies, Santa Clara, CA). Separation was achieved using a BPX column (length 60 m, ID 0.25 mm, film thickness 0.25 µm; Trajan Scientific and Medical, Ringwood, Australia). The mass spectrometer was used in selected ion monitoring mode with the parameters shown in Table SI-3. The gas chromatograph oven temperature program started at 80 °C, which was held for 1 min, then increased at 20 °C/min to 160 °C, then increased at 3 °C/min to 280 °C, which was held for 15 min. The carrier gas was helium, and the flow rate was 1 mL/min. Procedural blanks, spiked blanks, and matrix-spiked samples were analyzed.
Total organic carbon (TOC) content of the samples was determined using a previously described method (Nakata et al. 2014). Each road dust or sediment sample (approximately 5 g dw) was digested in hydrochloric acid solution (1.0 M, 30–50 mL) to remove inorganic carbon. The sample was centrifuged at 2500 rpm for 5 min, and the supernatant was removed. The solid residue was dried at 80 °C and analyzed using a JM1000CN Macro Corder instrument (J-Science Lab Co., Ltd., Kyoto, Japan). Statistical analyses were performed using Excel Statistics version 5.0 software (Esumi, Tokyo, Japan) to investigate differences in the PAH profiles of samples from different countries and areas.
Quality Assurance and Quality Control
Procedural blanks and spiked blanks were analyzed to assess contamination and quantification errors, and surrogate standards were used to assess PAH recovery. The acenaphthene-d10, phenanthrene-d10, chrysene-d12, and perylene-d14 recoveries were 52% ± 11%, 75% ± 10%, 114% ± 14%, and 130% ± 19%, respectively. Only naphthalene was detected in the procedural blanks. Marine sediment standard reference material IAEA-383 (International Atomic Energy Agency, Vienna, Austria) was analyzed to assess the accuracy and precision of the method. As shown in Table SI-4, the determined and expected individual PAH concentrations agreed well. PAH quantification limits were 0.04–0.2 ng/g.
Cancer Risk Assessment
We assessed the risks posed to humans by exposure to PAHs by calculating ILCR using a method published by the USEPA (1991). The ILCR for ingestion, dermal contact, and inhalation was calculated using Eqs. 1, 2, and 3, respectively.
In the equations, CS is the BaP-equivalent concentration in dust (µg/kg). The carcinogenic potency of each PAH relative to BaP (Larsen and Larsen 1998) was used to calculate the BaP-equivalent concentration of all PAHs. CSFIngestion, CSFDermal, and CSFInhalation are carcinogenic slope factors based on the carcinogencity of BaP (7.3, 25, and 3.9 mg/kg/day, respectively) (USEPA 2012; Knafla et al. 2006; OEHHA 2009). BW and EF are body weight and exposure frequency, respectively (BW: 16.8 kg for children and 57.7 kg for adults) (Dang et al. 2010); ED is the exposure duration (6 years for children and 30 years for adults) (USEPA 2004); IRinhalation is the inhalation rate (10 m3/day for children and 20 m3/day for adults) (Wang et al. 2011, USEPA 2002); IRingestion is the dust ingestion rate (100 mg/day for children and 50 mg/day for adults) (USEPA 2011); SA is the dermal exposure area (2800 cm2 for children and 5700 cm2 for adults) (USEPA 2004); AF is the dermal adherence factor (0.2 mg/cm2 for children and 0.07 mg/cm2 for adults) (USEPA 2004); ABS is the dermal absorption fraction (0.13 for children and adults) (USEPA 2004); AT is the average lifespan (25,550 days) (Ferreira-Baptista and De Miguel 2005); and PEF is the particle emission factor (1.36 × 109 m3/kg) (USEPA 2002). The detailed values used for the parameters are shown in Table SI-5. The risks posed to children and adults were calculated separately. The total risk was defined as the sum of the ILCRs for the different exposure routes.
Results and Discussion
Concentrations and Distributions of PAHs
The mean and maximum PAH concentrations and TOC contents for road dust samples from Japan, Myanmar, Taiwan, and Vietnam are shown in Table 1. High concentrations of PAHs were found in road dust samples from urban areas of Myanmar, particularly Yangon City. The highest PAH concentrations were found in samples from, in decreasing order, near Yangon zoo (site RD-33: 4100 ng/g dw), east of Yangon Central Station (RD-31: 1800 ng/g dw), and near the mouth of the Yangon River (RD-22: 1300 ng/g dw; Fig. 2). These sites were all in downtown Yangon and are strongly affected by traffic congestion, suggesting that emissions from motor vehicles may be major source of PAHs to road dust in Yangon. Low PAH concentrations were found in samples collected at sites RD-26 (84 ng/g dw), RD-44 (103 ng/g dw), and RD-35 (107 ng/g dw), although these sites were also in downtown Yangon. The differences in concentrations could be explained by the lower TOC content in the samples from less-polluted sites (mean TOC content 0.40%) than in samples from more-polluted sites (mean TOC content 1.2%). We found a significant relationship between TOC and PAH concentrations in road dust collected from Myanmar, except for RD-33, owing to exceptional high concentration (r = 0.466, p = 0.013; Fig. SI-1). The mean PAH concentration in road dust from Pathein City was 530 ng/g dw, which was comparable to the mean concentration in road dust from Yangon City (630 ng/g dw). High PAH concentrations were found in the samples from sites RD-8 (1400 ng/g dw) and RD-9 (1300 ng/g dw) in downtown Pathein City. The lowest concentration of PAHs was found in road dust from Pathein University (RD-1: 83 ng/g dw), probably because the traffic density is low in that area and the sample TOC content was low (0.24%). The Yangon–Pathein Highway in western Myanmar is the principal road between Yangon and Pathein. The mean PAH concentration in dust from the Yangon–Pathein Highway was 460 ng/g dw, with the highest concentration found in dust from a bridge crossing the Ayeyarwady River (1400 ng/g dw).
Lower PAH concentrations were found in the dust samples from rural areas and small towns in Myanmar. The mean PAH concentrations in samples from Bagan, Chaungthar, Myingyan, and Wundwin were 100, 290, 150, and 130 ng/g dw, respectively. This may be due to the lower populations and traffic densities in these areas. Flth and Py were the predominant PAHs in dust samples from Yangon, contributing 25% ± 6.1% and 24% ± 6.6% of the total PAH concentrations, respectively (Fig. 3). Chry and Phe also made large contributions to the total PAH concentrations. The PAH profiles were similar in nearly all samples, implying that the sources of PAHs in road dust are similar in urban and rural areas of Myanmar.
As for road dust samples, high PAH concentrations were found in sediment samples from urban parts of Yangon. The mean PAH concentration in sediment samples from Yangon was 280 ng/g dw (Table 2). High PAH concentrations were found in sediment from Inya Lake (SD-6: 1020 ng/g dw) and Kandawgyi Lake (SD-5: 890 ng/g dw dw) in downtown Yangon. PAH concentrations in sediment are divided into four categories: (a) a low degree of pollution, 0–100 ng/g dw; (b) moderate degree of pollution, 100–1000 ng/g dw; (c) high degree of pollution, 1000–5000 ng/g dw, and (d) very high degree of pollution, > 5000 ng/g dw (Baumard et al. 1998). The sediment samples from Myanmar were all in the category low degree of pollution for PAHs. In addition, a significant correlation was seen for the mean concentrations of 16 PAHs, except low molecular weight compounds, between road dust and sediment in Pathein (r = 0.919, p < 0.001) but not in Yangon (r = 0.427, p = 0.221; Fig. SI-2). This implies that road dust is a major source of PAH contamination in the sediment of Pathein, and there are several sources of PAHs in Yangon.
The dominant PAHs in sediment samples from Inya and Kandawgyi lakes were Flth, Py, IcdP, and BghiP, suggesting that motor vehicle emissions were important sources of PAHs for sediment in these lakes. However, Pery was an important component of the PAHs in sediment from other sampling sites in Yangon, contributing 38–63% of the total PAH concentrations (Fig. 3). Similar profiles were found in samples from Pathein. Pery has biogenic sources, as it is produced during diagenesis from natural precursors (Hite et al. 1980). The low PAH concentrations and predominance of Pery in the sediment from many sampling sites of Yangon indicated that the sampling sites had low to moderate levels of PAH pollution.
The mean PAH concentrations in road dust samples from Hanoi and Halong cities in Vietnam were 1700 and 360 ng/g dw, respectively (Table 1). The highest PAH concentration (4000 ng/g dw) was found in road dust from site RD-54, near Hoan Kiem Lake in downtown Hanoi. Hanoi, the capital of Vietnam, has approximately 7.7 × 106 inhabitants. High PAH concentrations (mean 1500 ng/g dw) have previously been found in road dust from Hanoi (Tuyen et al. 2014), and automobile exhaust fumes are assumed to be important sources of PAHs. The PAH concentrations were lower in road dust from Halong than in road dust from Hanoi, probably because of differences in the population and traffic densities in these cities. Phe, Py, and BghiP were the predominant PAHs in both Hanoi and Halong, implying that the sources of PAH are similar.
We analyzed a total of 16 road dust samples from Route 3, an arterial road in Kumamoto Prefecture of Japan. The mean PAH concentration was 520 ng/g dw (Table 1). This was lower than the mean PAH concentration of 3000 ng/g dw previously found in road dust from Tokyo, the capital of Japan (Khanal et al. 2018). However, high PAH concentrations were found in samples from sites RD-62 and RD-67 in Kumamoto City (3200 and 1100 ng/g dw, respectively), which have high traffic densities among the sampling sites. Low molecular weight PAHs (Py, Flth, and Phe) were the predominant PAHs in road dust samples, contributing 27%, 22%, and 12% of the total PAH concentrations, respectively (Fig. 3). These PAHs made similar contributions to the total PAH concentrations in road dust in Tokyo (Khanal et al. 2018).
The mean PAH concentration in road dust samples from Taiwan was 2400 ng/g dw, and the highest concentration (9400 ng/g dw) was found in the sample from site RD-84 (Table 1). High PAH concentrations were also found in samples from sites RD-86 (6000 ng/g dw) and RD-77 (3200 ng/g dw), which are on a main road in Tainan City. These concentrations were higher than those found in Japan and Myanmar but comparable to concentrations found in Hanoi City. Flth and Py were the predominant PAHs in road dust samples from Taiwan, contributing 24% and 27% of the total PAH concentrations, respectively. Phe and BghiP were also important PAHs, contributing 11% and 7.5% of the total PAH concentrations, respectively (Fig. 3). The profiles of road dust samples from different sites in Taiwan were nearly the same.
The PAH concentrations of the road dust samples analyzed in this study were compared with PAH concentrations found in other recent studies. PAH concentrations have been determined in road dust from Shanghai (mean 2400 ng/g dw; Jia et al. 2017), Lanzhou (3900 ng/g dw; Jiang et al. 2014), Xian (10,620 ng/g dw; Wei et al. 2015), and Guangzhou (4800 ng/g dw; Wang et al. 2011) in China. The mean PAH levels in road dust from Tehran, Iran and Cairo, Egypt were 330 ng/g (Saeedi et al. 2012) and 680 ng/g (Hassanien and Abdel-Latif 2008), respectively. These results indicate that PAH pollution is currently less serious in Myanmar and Japan than in other Asian countries.
Potential Sources of PAHs
Diagnostic ratios have been used to investigate the potential sources of PAHs in environmental samples. The Flth to Flth + Py ratio (Flth/Flth + Py) is a common diagnostic ratio. A Flth/Flth + Py ratio > 0.5 indicates diesel emissions, and a Flth/Flth + Py ratio < 0.5 indicates gasoline emissions (Ravindra et al. 2008). Yunker et al. (2002) found Flth/Flth + Py ratios > 0.50 for kerosene, grass, coal, and wood combustion but Flth/Flth + Py ratios < 0.5 for fuel and crude oil combustion and for automobile emissions. The Flth/Flth + Py ratios for vehicle emissions and crude oil combustion are similar (0.41–0.49) and closer to 0.50 than the Flth/Flth + Py ratio for diesel exhaust, suggesting that unburned diesel reduces the proportion of Flth in diesel exhaust (Sjogren et al. 1996; Schauer et al. 1996; Wang et al. 1999). An IcdP/IcdP + BghiP ratio > 0.5 indicates wood combustion, and an IcdP/IcdP + BghiP ratio of 0.62 indicates coal combustion (Grimmer et al. 1983; Yunker et al. 2002).
The mean Flth/Flth + Py ratios for most road dust samples from Myanmar were > 0.50 (Table 1). The highest Flth/Flth + Py ratio (0.59) was for Pathein, followed by 0.58 for Chaungthar, 0.53 for Bagan and Wundwin, and then next 0.51 for Myingyan and Yangon. High IcdP/IcdP + BghiP ratios were found for sites RD-8 (0.59), RD-31 (0.57), and RD-33 (0.58), at which the PAH concentrations were high. The Flth/Flth + Py ratio in sediment from site SD-6, which had the highest PAH concentration in Yangon, was 0.54. All of these sampling sites were near main roads with heavy traffic, and these results indicated that pyrogenic emissions from diesel vehicles may be important sources of PAHs.
A study of PM2.5 concentrations in the air of Yangon reported that the highest concentrations (164 ± 52 μg/m3) were found in a township; this was assumed to be because of smoke produced by burning dried vegetation and tea/food shops that use wood or charcoal stoves (Yi et al. 2018). No information is available on traffic congestion at the sampling sites, but the high PM2.5 and PAH concentrations in road dust suggest that there are various sources of PAHs in Myanmar.
The mean Flth/Flth + Py ratios for road dust samples from Hanoi in Vietnam were 0.47 ± 0.03 (i.e., these were similar and mostly < 0.50). The mean Flth/Flth + Py ratios for road dust from Japan and Taiwan were 0.46 ± 0.07 and 0.47 ± 0.08, respectively. The IcdP/IcdP + BghiP ratios for samples from Hanoi were 0.35 ± 0.06 (< 0.50). These results indicated that petrogenic fuel combustion by vehicles is the predominant PAH source in these countries. Diagnostic ratios for Japan and Vietnam determined in previous studies (Tuyen et al. 2014; Khanal et al. 2018) were similar to the ratios for our samples.
Cancer and Health Risk Assessment
We calculated the theoretical carcinogenic equivalents (CEQs) of PAHs by multiplying the concentrations in road dust by the appropriate carcinogenic potencies relative to BaP (Durant et al. 1996; Larsen and Larsen 1998). The carcinogenic potencies of individual PAHs and CEQ values are shown in Table 3.
Mean CEQs were high in urban areas of Myanmar (41 and 31 ng/g dw for Yangon and Pathein, respectively) but < 10 ng/g dw at rural sites (Table 3). The contributions of individual PAHs to the CEQ values for most samples from Myanmar decreased in the order BaP > Flth > BbF. In contrast, high CEQs were found for road dust from Tainan in Taiwan (173 ng/g dw) and Hanoi in Vietnam (162 ng/g dw). As for Myanmar, BaP and Flth were the predominant contributors to the total CEQs for samples from Japan, Taiwan, and Vietnam. However, BbF and IcdP were also important contributors to the total CEQs for samples from Vietnam. CEQs have previously been determined for road dust from Hanoi in Vietnam (mean 117 ng/g dw; Tuyen et al. 2014), Beijing in China (129 ng/g dw; Wang et al. 2010), Tehran in Iran (29 ng/g dw; Saeedi et al. 2012), and Cairo in Egypt (7.0 ng/g dw; Hassanien and Abdel-Latif 2008). In summary, the CEQs for road dust from Myanmar were comparable to CEQs for road dust from less-polluted areas in other countries.
In the carcinogenic risk assessment, an ILCR between 10−6 and 10−4 was assumed to indicate a potential carcinogenic risk, ILCR > 10−4 a high degree of carcinogenic risk (Liao and Chiang, 2006), and an ILCR ≤ 10−6 was assumed to indicate an acceptable degree of carcinogenic risk (Chiang et al. 2009; Peng et al. 2011). For Myanmar, high ILCR values were found for urban areas of Yangon (1.7 × 10−4 for children and 2.4 × 10−4 for adults) and Pathein (1.2 × 10−4 for children and 1.8 × 10−4 for adults); low ILCR values were found for rural areas, such as Bagan (2.5 × 10−5 for children and 3.6 × 10−5 for adults), Chaungthar (2.7 × 10−5 for children and 2.7 × 10−5 for adults) and Wundwin (3.8 × 10−5 for children and 5.4 × 10−5 for adults), as shown in Table 4 and Fig. 4. Similar results were found for Vietnam, where the ILCRs were five times higher for Hanoi than for Halong. The highest ILCR values were for Tainan (5.9 × 10−4 for children and 9.9 × 10−4 for adults). These results suggest that PAH exposure leads to a high degree of carcinogenic risk for inhabitants of Hanoi and Tainan.
Dermal exposure contributed 71–78% of the total (ingestion, dermal contact, and inhalation) ILCR (Table 4). Ingestion contributed 22–29% of the total ILCR, and inhalation contributed 0.004% or less of the total ILCR. The results obtained in this study lead us to conclude that PAH contamination is less severe in Myanmar than in other Asian countries and is unlikely to harm human health.
Conclusions
We determined the PAH concentrations in road dust from four Asian countries: Myanmar, Japan, Taiwan, and Vietnam. The PAH concentrations were higher in road dust from urban areas (e.g., Pathein and Yangon) than from rural areas in Myanmar. PAH diagnostic ratios indicated that fossil fuel combustion in vehicles and biomass combustion are important sources of PAHs in both urban and rural areas of Myanmar. High PAH concentrations were found in road dust from urban areas of Taiwan and Vietnam, in agreement with the results of previous studies. CEQ values calculated using PAH concentrations in road dust suggested that BaP, Flth, and BbF are the main contributors to health risks posed by PAHs to people in Myanmar, Japan, Taiwan, and Vietnam. ILCR values indicated that PAHs in road dust pose low levels of carcinogenic risk to inhabitants of Myanmar and Japan but high levels of carcinogenic risk to people living in urban areas of Taiwan and Vietnam. Environmental monitoring studies have been carried out in Asian countries, but to date, little information on PAH concentrations in environmental media has been available for Myanmar. To our knowledge, this is the first report to identify PAH pollution concentrations and distributions in environmental matrices collected from Myanmar.
References
Alves CA, Vicente AM, Custodio D, Cerqueira M, Nunes T, Pio C, Lucarelli F, Calzolai G, Nava S, Diapouli E, Eleftheriadis K, Querol X, Bandowe BAM (2017) Polycyclic aromatic hydrocarbons and their derivatives (nitro-PAHs, oxygenated PAHs, and azarenes) in PM 2.5 from Southern European cities. Sci Total Environ 595:494–504
Bacquart T, Frisbie S, Mitchell E, Grigg L, Cole C, Small C, Sarkar B (2015) Multiple inorganic toxic substances contaminating the groundwater of Myingyan Township, Myanmar: Arsenic, manganese, fluoride iron, and uranium. Sci Total Environ 517:232–245
Baumard P, Budzinski H, Garrigues P (1998) Polycyclic aromatic hydrocarbons in sediments and mussels of the western Mediterranean Sea. Environ Toxicol Chem 17:765–776
Chiang K, Chio C, Chinang Y, Lia C (2009) Assessing hazardous risks of human exposure of temple airborne polycyclic aromatic hydrocarbons. J Hazard Mater 166:167–685
Dang CV, Day RS, Selwyn B, Maldonado YM, Nguyen KC, Le TD, Le MB (2010) Initiating BMI prevalence studies in Vietnamese children: changes in a transitional economy. Asia Pac J Clin Nutr 19:209–216
Durant J, Busby J, Lafleur A, Penman B, Crespi C (1996) Human-cell mutagenicity of oxygenated, nitrated and unsubstituted polycyclic aromatic hydrocarbons associated with urban aerosols. Mutat Res Genet Toxicol 371:123–157
Ferreira-Baptista L, De Miguel E (2005) Geochemistry and risk assessment of street dust in Luanda, Angola: a tropical urban environment. Atmos Environ 39:4501–4512
Grimmer G, Jacob J, Naujack K, Dettbarn G (1983) Determination of polycyclic aromatic compounds emitted from brown-coal-fired residential stoves by gas chromatography/mass spectrometry. Anal Chem 55:892–900
Hassanien M, Abdel-Latif M (2008) Polycyclic aromatic hydrocarbons in road dust over Greater Cairo. Egypt J Hazard Mater 151:247–254
Hite RA, Laflamme RE, Windsor JG, Farrington JW, Deuser WG (1980) Polycyclic aromatic hydrocarbons in an anoxic sediment core from the Pettaquamscutt River (Rhode Island, USA). Geochim Cosmochim Acta 44:873–878
Jia J, Bi C, Guo X, Wang X, Zhou X (2017) Characteristics, identification, and potential risk of polycyclic aromatic hydrocarbons in road dusts and agricultural soils from industrial sites in Shanghai, China. Environ Sci Pollut 24:605–615
Jiang Y, Hu X, Yves UJ, Zhan H, Wu Y (2014) Status, source and health risk assessment of polycyclic aromatic hydrocarbons in street dust of an industrial city, NW China. Ecotoxicol Environ Saf 106:11–18
Khan MF, Hwa SW, Hou LC, Mustaffa NIH, Amil N, Mohamad N, Sahani M, Jaafar SA, Nadzir MSM, Latif MT (2017) Influences of inorganic and polycyclic aromatic hydrocarbons on the sources of PM2.5 in the Southeast Asian urban sites. Air Qual Atmos Health 10:999–1013
Khanal R, Furumai H, Nakajima F, Yoshimura C (2018) Carcinogenic profile, toxicity and source apportionment of polycyclic aromatic hydrocarbons accumulated from urban road dust in Tokyo, Japan. Ecotoxicol Environ Saf 165:440–449
Knafla A, Phillips KA, Brecher RW, Petrovic S, Richardson M (2006) Development of a dermal cancer slope factor for benzo[a]pyrene. Regul Toxicol Pharmacol 45:159–168
Larsen JC, Larsen PB (1998) Chemical carcinogens. In: Hester RE, Harrison RM (eds) Air pollution and health. The Royal Society of Chemistry, Cambridge, pp 33–56
Lee BK, Dong TT (2010) Effects of road characteristics on distribution and toxicity of polycyclic aromatic hydrocarbons in urban road dust of Ulsan, Korea. J Hazard Mater 175:540–550
Liao CM, Chiang KC (2006) Probabilistic risk assessment for personal exposure to carcinogenic polycyclic aromatic hydrocarbons in Taiwanese temples. Chemosphere 63:1610–1619
Lin TC, Chang FH, Hsieh JH, Chao HR, Chao MR (2002) Characteristics of polycyclic aromatic hydrocarbons and total suspended particulate in indoor and outdoor atmosphere of Taiwanese temple. J Hazard Mater 95:1–12
Nakata H, Uehara K, Goto Y, Fukumura M, Shimasaki H, Takikawa K, Miyawaki T (2014) Polycyclic aromatic hydrocarbons in oysters and sediments from Yatsushiro Sea, Japan: comparison of potential risks among PAHs, dioxins and dioxin-like compounds in benthic organisms. Ecotoxicol Environ Saf 99:61–68
Nguyen TC, Loganathan P, Nguyen TV, Vigneswaran S, Kandasamy J, Slee D, Stevenson G, Naidu R (2014) Polycyclic aromatic hydrocarbons in road deposited sediments, water sediments, and soils in Sydney, Australia: comparisons of concentration distribution, sources and potential toxicity. Ecotoxicol Environ Saf 104:339–348
OEHHA (2009) Technical support document for cancer potency factors. Appendix A : hot spots unit risk and cancer potency values A-1
Peng C, Chen W, Liao X, Wang M, Ouyang Z, Jiao W, Bai Y (2011) Polycyclic aromatic hydrocarbons in urban soils of Beijing: status, sources, distribution and potential risk. Environ Pollut 154:802–808
Ravindra K, Sokhi R, Vangrieken R (2008) Atmospheric polycyclic aromatic hydrocarbons: source attribution, emission factors and regulation. Atmos Environ 42:2895–2921
Saeedi M, Li LY, Salmanzadeh M (2012) Heavy metals and polycyclic aromatic hydrocarbons: pollution and ecological risk assessment in street dust of Tehran. J Hazard Mater 227–228:9–17
Schauer JJ, Rogge WF, Hildemann LM, Mazurek MA, Cass GR, Simoneit BR (1996) Source apportionment of airborne particulate matter using organic compounds as tracers. Atmos Environ 30:3837–3855
Sjogren M, Li H, Rannug U, Westerholm R (1996) Multivariate analysis of exhaust emissions from heavy-duty diesel fuels. Environ Sci Technol 30:38–49
Takada H, Onda T, Harada M, Ogura N (1991) Distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in street dust from the Tokyo Metropolitan area. Sci Total Environ 107:45–66
Tuyen LH, Tue NM, Suzuki G, Misaki K, Viet PH, Takahashi S, Tanabe S (2014) Aryl hydrocarbon receptor mediated activities in road dust from a metropolitan area, Hanoi Vietnam: Contribution of polycyclic aromatic hydrocarbons (PAHs) and human risk assessment. Sci Total Environ 491–492:246–254
USEPA (1991) Risk assessment guidance for superfund: volume I—human health evaluation manual (part b, development of risk-based preliminary remediation goals). US Environ Prot Agency, Washington, DC [9285.7-01B. EPA/540/R-92/003]
USEPA (1993) Provisional guidance for quantitative risk assessment of polycyclic aromatic hydrocarbons EPA/600/R-93/089
USEPA (2002) Supplemental guidance for developing soil screening levels for superfund
USEPA (2004) Risk assessment guidance for superfund. Volume I: Human health evaluation manual (part e, supplemental guidance for dermal risk assessment)
USEPA (2011) Exposure factors handbook, edition (final). U.S. Environmental Protection Agency, Washington, DC [EPA/600/R-09/052F]
USEPA (2012) Benzo[a]pyrene (BaP) (CASRN 50-32-8)
van Geen A, Win KH, Zaw T, Naing W, Mey JL, Mailloux B (2014) Confirmation of elevated arsenic levels in groundwater of Myanmar. Sci Total Environ 478:21–24
Villeneuve DL, Khim JS, Kannan K, Giesy JP (2002) Relative potencies of individual polycyclic aromatic hydrocarbons to induce dioxin-like and estrogenic responses in three cell lines. Environ Toxicol 17:128–137
Wai KM, Umezaki M, Kosaka S, Mar O, Umemura M, Fillman T, Watanabe C (2018) Impact of prenatal heavy metal exposure on newborn leucocyte telomere length: a birth-cohort study. Environ Pollut 243:1414–1421
Wang Z, Fingas M, Shu YY, Sigotuin L, Landriault M, Lambert P, Turpin R, Campagna P, Mullin J (1999) Quantitative characterization of PAHs in burn residue and soot samples and differentiation of pyrogenic PAHs from petrogenic PAHs- the 1994 Mobile burn study. Environ Sci Technol 33:3100–3109
Wang C, Li Y, Liu J, Xiang L, Shi J, Yang Z (2010) Characteristics of PAHs adsorbed on street dust and the correlation with specific surface area and TOC. Environ Monitor Assess 169:661–670
Wang W, Huang M, Wang HS, Leung AOW, Cheng KC, Wong MH (2011) Polycyclic aromatic hydrocarbons (PAHs) in urban surface dust of Guangzhou, China: status, sources and human health risk assessment. Sci Total Environ 409:4519–4527
Wei C, Han Y, Bandowe BAM, Cao J, Huang R, Ni H, Tian J, Wilcke W (2015) Occurrence, gas/particle partitioning and carcinogenic risk of polycyclic aromatic hydrocarbons and their oxygen and nitrogen containing derivatives in Xian, Central China. Sci Total Environ 505:814–822
Yi EEPN, Nay NC, Aung WY, Thant Z, Wai TH, Hlaing KK, Maung C, Yagishita M, Ishigaki Y, Win-Swe TTW, Nakajima D, Mar O (2018) Preliminary monitoring of concentration of particulate matter (PM 2.5) in seven townships of Yangon City. Myanmar. Environ Health Prev Med 23:53
Yunker MB, Macdonald RW, Vingarzan R, Mitchell RH, Goyette D, Sylvestre S (2002) PAHs in the Fraser River basin: a critical appraisal of PAH ratios as indicators of PAH source and composition. Org Geochem 33:489–515
Acknowledgements
The authors thank the students and staff of Pathein University in Myanmar, the National University of Civil Engineering (NUCE) in Vietnam, the Fishery Research Institute in Taiwan, Prefectural University of Kumamoto, and Kumamoto University for help with sampling road dust and sediments. This study was supported by the Bilateral Open Partnership Joint Research Project, funded by the Japan Society for the Promotion of Science.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Mon, E.E., Phay, N., Agusa, T. et al. Polycyclic Aromatic Hydrocarbons (PAHs) in Road Dust Collected from Myanmar, Japan, Taiwan, and Vietnam. Arch Environ Contam Toxicol 78, 34–45 (2020). https://doi.org/10.1007/s00244-019-00693-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00244-019-00693-y