Abstract
Friction Stir Spot Welding (FSSW) is a variant of the Friction Stir Welding (FSW) process and has been successfully used in industrial applications. During the FSSW process, thermal inputs due to friction and deformation are commenced simultaneously, as the non-consumable rotating tool plunges into the workpiece to be welded. Various assumptions and hypotheses for mechanisms of heat generation and material deformation during FSW/FSSW process are reported, but a consensus is still to be reached. The joining quality is mainly dependent upon the material flow in this solid state joining technique. The material flow and deformations in the near and far fields of the weld are directly affected by the temperature-sensitive mechanical properties. Therefore, a comprehension of thermo-mechanical responses are of high importance from the viewpoints of parameter optimization and understanding of the mechanisms. The FSSW process is experimentally and theoretically studied to address these issues of the mechanism of heat generation and coupled thermo-mechanical response of the workpiece, as well as the effects of tool rotation and plunge speeds. For theoretical studies, a 3-dimensional, physical-based FEM (Finite Element Method) model is developed using commercial code. For heat generation, friction and deformation-based formulations are used. For material responses, thermal and strain rate-sensitive, elastic-plastic data are employed by a constitutive Johnson Cook material model and thermo-mechanical behaviour is analyzed with respect to experimental observations. To cope with high calculation time and distortion of the mesh, built-in features of the code, mass scaling, ALE (Arbitrary Lagrangian Eulerian) and mesh re-mapping were used. As a result of this work, a basic platform in the form of a physical-based, coupled, thermo-mechanical model is developed. With the help of this model, effects of process parameters on the temperature — displacement behaviour of the workpiece are studied. The role of interaction conditions at the tool-workpiece interface is emphasized and a simplified conceptual mechanism for effects of process variables on the physical phenomena is presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Gerlich A., Avramovic-Cingara G., North T.H.: Stir zone microstructure and strain rate during Al 7075-T6 friction stir spot welding, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2006, vol. 37, no. 9, pp. 2773–2786.
Mishra R.S., Ma Z.Y.: Friction Stir Welding and Processing, Materials Science and Engineering Reports, 2005, vol. 50, no. 1–2, pp. 1–78.
Awang M., Mucino V, Feng Z., David S.: Thermo-mechanical modelling of FSSW Process, SAE International 2005-01–1251.
Friction Stir Welding and Processing, R.S. Mishra, M.W. Mahoney, Editors, ASM Internationals, 2008, pp. 235–272.
Mandai S., Rice J., Elmustafa A.: Experimental and numerical investigation of the plunge stage in friction stir welding, Journal of Materials Processing Technology, 2008, vol. 203, no. 1–3, pp. 411–419.
Khosa S., Weinberger T, Enzinger N.: Material flow investigations during FSSW of Al 6082-T6 by FEA and experimental using different tool geometries, in University-Industry International Workshop (UIIW) at Nantes, France, June-2007.
Colegrove P.A., Shercliff H.R.: 3-Dimensional CFD modelling of flow round a threaded FSW tool profile, Journal of Material Processing Technology, 2005, vol. 169, no. 2, pp. 320–327.
Arora A., Zhang Z., De A., DebRoy T: Strains and strain rates during friction stir welding, Scripta Materialia, 2009, vol. 61, no. 9, pp. 863–866.
Su J.-Q., Nelson T.W., Mishra R., Mahoney M.: Microstructural Investigation of FSW 7050-T65 Aluminum, Acta Materialia, 2003, vol. 51, no. 3, pp. 713–729.
Feng Z., Santella M.L., David S.A., Steel R.J., Packer S.M., Pan T, Kuo M., Bhatnagar R.S.: FSSW of Advanced High-Strength Steels — A Feasibility Study, SAE International 2005-01–1248, 2005.
Connoly C: Friction spot joining in aluminium car bodies, Industrial Robot: An International Journal, 2007, vol. 34, no. 1, pp. 17–20.
Figner G., Valiant R., Weinberger T, Schröttner H., Paśič H., Enzinger N.: Friction stir spot welds between aluminium and steel automotive sheets — Influence of welding parameters on mechanical properties and microstructure, Doc. IIW-1925-08 (ex-doc. SC-Auto-020r1–08), Welding in the World, 2009, vol. 53, no. 1/2, pp. R13–R23.
Buffa G., Fratini L, Piacentini M.: On the influence of tool path in friction stir spot welding of aluminum alloys, Journal of Materials Processing Technology, 2008, vol. 208, no. 1–3, pp. 309–317.
Badarinarayan H., Yang Q., Zhu S.: Effect of tool geometry on static strength of friction stir spot welded aluminium alloy, International Journal of Machine Tools and Manufacture, 2009, vol. 49, no. 2, pp. 142–148.
Gerlich A., Su P., North T: Tool penetration during friction stir spot welding of Al and Mg alloys, Journal of Materials Science, 2005, vol. 40, no. 24, pp. 6473–6481.
Kakarla S.ST, Muci-Kuchler K.H., Arbegast W.J., Allen CD.: Three-dimensional finite element model of friction stir spot welding process, Friction Stir Welding and Processing III, TMS, 2005, pp. 213–220.
Guerdoux S., Miles M., Fourment L, Sorensen C: Numerical simulation of the friction stir welding process using both Lagrangian and arbitrary Lagrangian Eularian formulations, Materials Processing and Design: Modeling, Simulation and Applications — NUMIFORM 2004 — Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Process, 2004, vol. 712, pp. 1259–1264.
Schmidt H., Hattel J.: A local model for the thermo-mechanical conditions in friction stir welding, Modelling and Simulation in Materials Science and Engineering, 2005, vol. 13, no. 1, pp. 77–93.
Schneider J., Beshears R., Nunes A.C. Jr.: Interfacial sticking and slipping in the friction stir welding process, Materials Science and Engineering A, 2006, vol. 435–436, pp. 297–304.
Frigaard Ø., Grong Ø., Midling O.: A Process Model for friction stir welding of age hardening aluminium alloys, Metallurgical and Materials Transactions A, 2001, vol. 32, no. 5, pp. 1189–2000.
Tasic P.: Predictions of temperature fields in work piece and tool during FSSW by using FEA, Diploma Thesis, IWS — TU Graz, 2006.
DISIMULIA Abaqus User and Theory Manuals ver-6.7, 2008.
Celigoj C, Außerlechner P.: A total ALE FE formulation for axisymmetric and torsional problems (including viscoplasticity, thermodynamic coupling and dynamics), International Journal for Numerical Methods in Engineering, 2006, vol. 70, no. 11, pp. 1324–1345.
Maalekian M.: Friction welding — Critical assessment of literature, Science and Technology of Welding and Joining, 2007, vol. 12, no. 8, pp. 738–759.
Maalekian M., Kozeschnik E., Brantner H.P, Cerjak H.: Inverse modelling and simulation of heat generation in friction welding, Mathematical modelling of weld phenomena 8, Cerjak H., Bhadeshia HKDB, Kozeschnik E., Editors, Verlag der Technischen Universität Graz, 2007, pp. 881–890.
Chen C, Kovacevic R.: Thermomechanical modelling and force analysis of friction stir welding by finite element method, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2004, vol. 218, no. 5, pp. 509–519.
Özel T., Zeren E.: Determination of work material flow stress and friction for FEA of machining using orthogonal cutting tests, Journal of Material Processing Technology, 2004, vol. 153–154, pp. 1019–1025.
Author information
Authors and Affiliations
Corresponding authors
Additional information
They are all associated with JOIN — Network of Excellence for Joining, Austria
Rights and permissions
About this article
Cite this article
Khosa, S.U., Weinberger, T. & Enzinger, N. Thermo-Mechanical Investigations during Friction Stir Spot Welding (FSSW) of AA6082-T6. Weld World 54, R134–R146 (2010). https://doi.org/10.1007/BF03263499
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03263499