Abstract
The feasibility of the use of potassium nitrate and potassium perchlorate as temperature standards in Differential scanning calorimetry has been studied. The solid-state phase transition temperatures of KNO3 and KClO4 were determined by means of DSC. The metrological properties of these salts as calibration materials were examined. The reliability of KNO3 and KClO4 calibrations was investigated by twofold determination of the bismuth melting temperature after the apparatus had been calibrated with indium and lead, and with KNO3 and KClO4. Conclusions were drawn concerning the suitability of these salts for use as DSC temperature calibrants.
Zusammenfassung
Es wurde die Möglichkeit der Verwendung von Kaliumnitrat und Kaliumperchlorat als Temperaturstandard für DSC untersucht. Die Bestimmung der Temperaturen für Feststoff-Phasenumwandlungen von Kaliumnitrat und Kaliumperchlorat wurde mittels DSC erreicht. Weiterhin wurden die meßtechnischen Eigenschaften der untersuchten Salze (KNO3 und KClO4) als Bezugssubstanzen geprüft. Die Zuverlässigkeit der Kalibrierung mittels KNO3 und KClO4 wurde durch eine zweifache Bestimmung der Schmelztemperatur von Wismut überprüft: einmal nach der Kalibrierung des Gerätes mit Indium und Blei und andererseits nach der Kalibrierung mit Kaliumnitrat und Kaliumperchlorat. Angesichts der Resultate kann man feststellen, daß die untersuchten Salze zur Temperaturkalibrierung in der DSC geeignet sind.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K. Kostyrko, M. Skoczylas and A. Klee, J. Thermal Anal., 33 (1988) 351.
K. Kostyrko and M. Skoczylas, Fourth Symposium on Temperature and Thermal Measurement in Industry and Science Tempmeko 90, p. 376.
J. E. Callanan, S. A. Sullivan and D. F. Vecchia, Standard Reference Materials: Feasibility Study for the Development of Standards Using Differential Scanning Calorimetry, NBS Special Publication, 1985, p. 260.
J. L. McNaughton and C. T. Mortimer, Differential Scanning Calorimetry, Norwalk, Conn,: Perkin-Elmer Corporation.
G. W. H. Höhne, H. K. Cammenga, W. Eysel, E. Gmelin and W. Hemminger, PTB-Mitteilungen, 100 (1990) 25.
J. C. van Miltenburg and M. A. Cuevas-=Diarte, Thermochim. Acta, 156 (1989) 292.
ASTM Standard E 967-83, Standard Practise for temperature Calibration of Differential Scanning Calorimeter and Differential Thermal Analyzers.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kostyrko, K., Skoczylas, M. Temperature standard reference materials for thermal analysis. Journal of Thermal Analysis 38, 2181–2188 (1992). https://doi.org/10.1007/BF01979632
Issue Date:
DOI: https://doi.org/10.1007/BF01979632