Conclusions
A technology was developed for making high-alumina low-fired products using kyanite-sillimanite concentrate with a sulfite-lye or orthophosphoric acid bond.
The possibility was established of using low-fired brick at service temperatures of up to 1500°C. The tests of these high-alumina products in steel casting ladles of different capacities and in industrial kilns with different service conditions enabled us to establish the most effective locations of their use.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
L. A. Tseitlin and A. A. Eltysheva, Ogneupory, No. 1, 34 (1962).
L. A. Tseitlin and T. E. Sudarkina, Ogneupory, No. 3, 31 (1966).
S. A. Zhikharevich et al., Ogneupory, No. 6, 11 (1966).
T. S. Ignatova et al., Ogneurpory, No. 8, 355 (1963).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 6, pp. 6–9, June, 1971.
Rights and permissions
About this article
Cite this article
Tseitlin, L.A., Merkulova, E.V. High-alumina low-fired products based on kyanite — Sillimanite concentrate. Refractories 12, 351–353 (1971). https://doi.org/10.1007/BF01282050
Issue Date:
DOI: https://doi.org/10.1007/BF01282050