Abstract
This study proposes a moving Dugdale model for modes I, II and III, presents a fully dynamic analysis of the problem with the help of complex function theory and gives an exact analytical solution. From this solution, the stress and displacement fields and the dynamic crack opening displacement for mode I, II and III are determined. Based on this, the author proposes a criterion to describe dynamic behaviour of a moving defect in solids.
Zusammenfassung
Diese Arbeit schlägt ein bewegliches Dugdale Modell für Mode I, II und III vor. Sie gibt eine vollständige dynamische Analyse des Problems mit der Methode der komplexen Funktionstheorie und liefert die exakte analytische Lösung. Aus dieser Lösung werden die Spannungs- und Verschiebungsfelder und damit die dynamischen Rißöffnungsverschiebungen für Mode I, II und III dieses Problems bestimmt. Auf dieser Grundlage schlägt der Autor ein Kriterium zur Beschreibung des dynamischen Verhaltens eines bewegten Defekts in einem Festkörper vor.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
T. Y. Fan,Moving defect with irreversible deformation zone and criterion of nonlinear dynamic fracture of solids. Chinese Phys. Lett.3, 405–408 (1986).
E. H. Yoffé,The moving Griffith crack, Phil. Mag.,42, 739–750 (1951).
D. S. Dugdale,Yielding of steel sheets containing slits. J. Mech. Phys. Solids8, 100–104 (1960).
B. A. Bilby, A. H. Cottrell and K. H. Swinden,The spread of plastic yield from a notch. Proc. Roy. Soc. London, Ser. A272, 304–314 (1963).
G. M. L. Gladwell,On the solution of the problems of dynamic plane elasticity. Mathematika4, 166–168 (1957).
J. N. Goodier and F. A. Field,Fracture of Solids. Interscience, New York 1963.
Author information
Authors and Affiliations
Additional information
This work is supported by the Research Fellowship of Alexander von Humboldt Foundation, Federal Republic of Germany.
Rights and permissions
About this article
Cite this article
Fan, T.Y. Moving Dugdale model. Z. angew. Math. Phys. 38, 630–641 (1987). https://doi.org/10.1007/BF00946342
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00946342