Abstract
A novel and convenient copper (II) bromide and 1,8-diazabicyclo[5.4.1]undec-7-ene (DBU) or 1,10-phenanthroline catalysis protocol for the construction of α-alkyl-β-keto sulfones via C(sp3)-H bond functionalization followed by C(sp3)-S bond formation between aryl ketones and sodium sulfinates at room temperature has been developed. This method is applicable to a wide range of aryl ketones and sodium sulfinates. The electronic effects of aryl ketones and ligands effects of the copper salts are crucial for this transformation. Typically, substituted aryl ketones with electron-withdrawing group do not need any ligand to give a good to excellent yield, while substituted aryl ketones with electron-donating group and electron-rich heteroaromatic ketones offer a good to excellent yield only under the nitrogen-based ligands. The practical value of this transformation highlights the efficient and robust one-pot synthesis of α-alkyl-β-keto sulfones.
Similar content being viewed by others
Introduction
Since its initial discovery, transition-metal-catalyzed C-H bond functionalization has emerged as an efficient and powerful synthetic strategy in modern synthetic chemistry1,2,3,4,5 and there are extensive applications in academic research and industry. In particular, the formation of C-S bonds has been widely investigated and significant efforts have been devoted to the development of synthetic methodology on the compounds containing C-S bond scaffolds6,7,8. For example, Guo et al.9 have recently presented an approach on copper-catalyzed aerobic decarboxylative sulfonylation of alkenyl carboxylic acids with sodium sulfinates. Liu et al.10 have reported an unprecedented approach on the construction of 2-sulfonylbenzo[b]furans from readily available trans-2-hydroxycinnamic acids and sodium sulfinates mediated by copper and silver salts under mild conditions. Therefore, the development of efficient C-S bond formation still remains a challenge in recent decades.
β-Keto sulfones are of much significant intermediates owing to their ubiquitous presence and versatile applications in biological and pharmaceutical areas11,12, as well as in the synthesis of acetylenes13, olefins14, allenes15, vinyl sulfones16 and some natural products17. As a result of their synthetic value and versatile reactivity, great efforts have been made towards constructing β-keto sulfones during the past decades18,19,20,21,22,23,24. For instance, Ramaiah’s23 and Venkateswarlu’s24 groups have reported a traditional nucleophilic substitution reaction using the toxic α-halogenated aryl ketones and sodium sulfinates, respectively. However, up to now, rare examples have been reported on using C-H bond functionalization to synthesize β-keto sulfones. Recently, Lei et al.25 have reported an unprecedented protocol of achieving β-keto sulfones by using terminal alkynes and benzenesulfinic acid via a dioxygen-triggered radical process (Fig. 1(a)). The process involves C(sp)-H bond carbonylation and C(sp3)-H bond functionalization. Yadav et al.26 later described a AgNO3/K2S2O8 catalyzed radical route to the synthesis of β-keto sulfones via C(sp2)-H bond carbonylation and C(sp3)-H bond functionalization using dioxygen as oxidant (Fig. 1(b)). However, no report on the synthesis of β-keto sulfones via a formal C(sp3)-H bond functionalization coupling reaction has been presented so far, especially on the synthesis of α-alkyl-β-keto sulfones.
In this paper, we wish to report a simple and novel copper (II) bromide and 1,8-diazabicyclo[5.4.1]undec-7-ene (DBU) or 1,10-phenanthroline catalytic protocol involving the C(sp3)-H functionalization aryl ketones with sodium sulfinates for the synthesis of α-alkyl-β-keto sulfones under mild conditions (Fig. 1(c)). This reaction can be regarded as a dehydrogenative coupling involving a formal C(sp3)-H bond functionalization at the α-position of the aryl ketones. The nitrogen-based ligands play a key role in the electronic effects of aryl ketones. Comparing to previous works, this method can realize the transformation by the nitrogen-based ligand under simple operation and mild conditions. To the best of our knowledge, this is first report of the C(sp3)-H functionalization followed by C(sp3)-S bond formation of aryl ketones for the synthesis of α-alkyl-β-keto sulfones via copper/DBU catalytic system with and without nitrogen-based ligand.
Results
We commenced our studies by using propiophenone (1a) and sodium benzenesulfinate (2a) as model substrates under various conditions and the results are summarized in Table 1. As shown in Table 1, when the reaction was carried out in the presence of CuBr2 (20 mol%) in DMSO in an open flask (in air) for 24 h, no product was detected in the mixtures in spite of the α-C-H of a ketone possessing weak activity (entry 1) and the similar results were found after several bases being employed under the same conditions (entries 2–9). Gratifyingly, when the strong organic base DBU was examined, the desired product was generated in a 47% yield (entry 10). The structure of the product 3aa was confirmed by comparison of 1H NMR, 13C NMR and HRMS, even 2D NMR (see Supporting Information). To further improve the yield of 3aa, we subsequently enhanced the amount of DBU, finding that the best yield (87%) was obtained in 5 hours when 1.0 equiv of DBU was added (entry 11), indicating that addition of the appropriate amount of DBU was crucial for the reaction. In these reactions, DBU has a dual functionality as a ligand and as a base to enolize the substrate. To further improve the yield, the 1.4 equiv of DBU was added, but the yield was not improved (entry 12). In addition, the blank experiments were also performed to verify the effect of the catalyst. As envisaged, no reaction occurred with DBU alone in the absence of CuBr2 (entry 13), indicating that CuBr2 as the catalyst plays a tremendously important role in this transformation. To further confirm our conclusion, several catalysts were also tested, but with disappointing results (entries 14–18). In addition, other solvents were also examined and were found to give lower yields (see Supporting Information), thus DMSO was considered as the most suitable solvent for the reaction.
With the optimal conditions in hand, we defined the scope of the reaction with respect to various aryl ketones and sodium sulfinates and the results are summarized in Figs 2 and 3. Firstly, several sodium sulfinates were explored with 1a. All the reactions, including sodium sulfinates with electron-withdrawing and electron-donating groups, proceeded smoothly to give their corresponding products (3aa–3ai) in moderate to good yields.
Subsequently, various aryl ketones were also investigated with 2a. As listed in Fig. 3, we were pleased to find that electron-withdrawing substituents on aryl ring of ketone, such as halogen and trifluoromethyl functional groups, were well tolerated under the optimal reaction conditions and gave the corresponding products (3ba–fa) in good yields. In this process, the steric factor was also verified by employing para-, meta- and ortho-F-substituted propiophenones as substances. The similar yields indicated that this transformation was not affected by the steric factor. However, electron-donating substituents on aryl ring of ketone, such as methyl and methoxy and electron-rich heteroaromatic ketone, such as thiophenes and furans, were subjected to this transformation under the optimal conditions (method A: reaction conditions: 1 (0.5 mmol), 2 (1.0 mmol) and CuBr2 (20 mol%) and DBU (1 equiv) in 3 mL DMSO at room temperature in an open flask (in air)), indicating that electronic factor plays the major role.
Given that copper salts own strong coordination ability with the nitrogen and phosphine-based ligands, we attempted to add a ligand into the mixtures. We focused on the less effective aryl ketone with electron-donating groups and compared these reactions with and without ligand in each case. Firstly, 1g was chosen as the starting substrate to react with 2a under standard conditions in the presence of a ligand (e.g. L1–L6). To our delight, it was found that the 1g could be efficiently converted to the corresponding product 3ga in the assistance of L2 or L3 as ligand (Table 2). The ligand effect is obviously demonstrated in these reactions, we speculated that the coordinated nitrogen-based ligands can also withdraw electrons from electron-rich arenes leading to enable yield. Moreover, the methyl substituted propiophenone at meta position (1h) was also explored to compare with 1g, it was found that a similar yield (70%) was obtained. Finally, the L3 was regarded as the most appropriate ligand for the copper salt. With the optimal ligand L3 identified, treatment of aryl ketones bearing methoxy under the modified conditions (method B: reaction conditions: 1 (0.5 mmol), 2 (1.0 mmol) and CuBr2 (20 mol%) and DBU (1 equiv) in 3 mL DMSO at room temperature in an open flask (in air)), as expected, gave the desired product in good yield (3ia). In addition, under the modified conditions, heteroaromatic ketones (3ja and 3ka) were also effective coupling partners, delivering corresponding products in high yields. n-Butyrophenone (3la) and acetophenone (3ma) are successively explored, 75% and 45% yield were achieved, respectively. Unfortunately, a lower yield was obtained when α-tetralone (3na) was used as the substrate. Notably, the use of ethyl benzoylacetate (3oa) did not provide product.
We conducted a scale-up experiment using 1a (10 mmol) (Fig. 4). This reaction proceeded smoothly in the scale-up experiment and resulted in a yield of up to 80%.
Discussion
To investigate the reaction mechanism, several control experiments were performed, as shown in Fig. 5. Firstly, the radical scavenger 2,2,6,6-tetramethyl-piperidine-1-oxyl (TEMPO) (Fig. 5, Eq. 1) and butylated hydroxytoluene (BHT) (Fig. 5, Eq. 2) were employed under the optimized conditions, respectively. In accordance with the references27,28,29,30, when 2.0 equiv of TEMPO or BHT (2 times to 1a ) was added to the reaction, 3aa was obtained in low yield. However, this transformation was completely inhibited with the addition of 4.0 equiv of TEMPO or BHT to the system, indicating a radical pathway should be involved in titled reaction. To further verify this point, we attempted to utilize 1,1-diphenylethylene to capture the radical. We tested the reaction with 1a and 1,1-diphenylethylene in the present or absence of 2a under the method A (Fig. 5, Eq. 3 and Eq. 4). A decreasing yield of 3aa and a 17% yield of desired product 4a were achieved in the present of 2a; in the absence of 2a, a 25% yield of 4a was given, which can be interpreted as the evidence that sulfonyl radical was generated in this transformation. In view of the fact that carbonyl substrates could undergo bromination at the α-position via copper-boundenolate to generate α-bromo carbonyl, as MacMillan et al. have described31. Thus, we designed the experiment that propiophenone itself reacted in the absence of sodium benzenesulfinate under the optimal conditions, but no α-bromo propiophenone was detected (Fig. 5, Eq. 5). Considering that α-bromo propiophenon can be quickly oxidized to 1,2-dicarbonyl compound32 leading to the complete consumption of α-bromo propiophenone, we further prolonged the reaction time, but no products was observed. Afterwards, the reaction of propiophenone with superstoichiometric amounts of copper (II) bromide was carried out, however, no α-bromo propiophenone or other products were still formed. Thus, the possibility was firstly eliminated.
Based on the preliminary results and previous reports, a plausible mechanism of this transformation is proposed (Fig. 6). A free radical pathway via C(sp3)-H bond functionalization of aryl ketones with sodium sulfinates is involved. We divided the mechanism into three parts. Part I, the intermediate A is generated by the coordination of copper to the sodium sulfinate28,29,33 and then the sulfonyl free radical intermediate is produced through the release of CuBr28,29,34. In addition, sodium sulfinate can also be quickly oxidized by DMSO via single electron-transfer (SET) to an oxygen centered radical resonating with the sulfonyl radical intermediate9,29. Part II, aryl ketones undergo deprotonation under LCu(II)Br2 and/or DBU involving in situ dehydrogenation of a ketone to intermediate B and B’ which exists the tautomerism and released the HLCu(II)Br2 and/or HDBU (part II, (1)). Afterwards, the intermediate B can be converted to alkylcopper intermediate C35,36 and then the intermediate C is subsequently attacked by sulfonyl radical to form the Cu(III) intermediate D, which undergoes a reductive elimination to give the target product with the release of LCu(I)Br (part II, (2))27,37. Simultaneously, the intermediate B’ with HLCu(II)Br2 can be transformed to a copper enolate intermediate C’. The sulfonyl radical intermediate undergoes coupling with the copper enolate C’ to generate a copper-coordinated ketyl radical D’, which forms copper-coordinated product E by a final SET and releases the LCu(I)Br. Finally, the copper-coordinated product E can be smoothly converted to the target product (part II, (3))38,39. Part III, the Cu(I) is oxidized to regenerate the Cu(II) species27 thereby forming a copper oxidative and reductive recycle process. However, the specific process of the ligand promoting this transformation is still not clear yet, but further studies on this are ongoing.
Conclusion
In conclusion, we have developed a robust and efficient one-pot synthetic approach to the synthesis of complex α-alkyl-β-keto sulfones via C(sp3)-H bond functionalization followed by C(sp3)-S bond formation of aryl ketones with sodium sulfinates using copper (II) bromide and DBU or 1,10-phenanthroline under mild conditions. Preliminary mechanism revealed that a radical process may be involved in this method. In this reaction, substituted aryl ketones with electron-withdrawing group do not need any ligand to give a good to excellent yield; and substituted aryl ketones with electron-donating group and electron-rich heteroaromatic ketones offer good to excellent yield only under the nitrogen-based ligands. Further research on electronic effects of aryl ketones is also proceeding in our group.
Methods
CuBr2 (20 mol%), DBU (1 equiv) and 1,10-phenanthroline (20 mol%) (It was employed in the mixtures under the modified conditions) were added into a mixture of aryl ketones (0.5 mmol, 1 equiv), sodium sulfinates (1.0 mmol, 2 equiv) in solvent (3 mL) at room temperature in open flask for the requisite period of time while monitoring the reaction progress by TLC. After completion of the reaction determined by TLC, the reaction mixture was poured into water (10 mL) and extracted with CH2Cl2 (3 × 25 mL) and the organic phase was dried over anhydrous MgSO4. The combined organic phase and washings were concentrated by a rotary evaporator and the residue was purified by column chromatography on silica gel (200–300 mesh) using petroleum ether and ethyl acetate as eluent to provide the desired product.
Additional Information
How to cite this article: Lan, X.-W. et al. Ligand-Mediated and Copper-Catalyzed C(sp3)-H Bond Functionalization of Aryl Ketones with Sodium Sulfinates under Mild Conditions. Sci. Rep. 5, 18391; doi: 10.1038/srep18391 (2015).
References
Kondo, T. & Mitsudo, T. Metal-catalyzed carbon–sulfur bond formation. Chem. Rev. 100, 3205–3220 (2000).
Ley, S. V. & Thomas, A. W. Modern synthetic methods for copper-mediated C(aryl)-O, C(aryl)-N and C(aryl)-S bond formation. Angew. Chem., Int. Ed. 42, 5400–5449 (2003).
Beletskaya, I. P. & Ananikov, V. P. Transition-metal-catalyzed C–S, C–Se and C–Te bond formation via cross-coupling and atom-economic addition reactions. Chem. Rev. 111, 1596–1636 (2011).
Partyka, D. V. Transmetalation of unsaturated carbon nucleophiles from boron-containing species to the mid to late d-block metals of relevance to catalytic C-X coupling reactions (X = C, F, N, O, Pb, S, Se, Te). Chem. Rev. 111, 1529–1595 (2011).
Liu, C., Liu, D. & Lei, A. W. Recent advances of transition-metal catalyzed radical oxidative cross-couplings. Acc. Chem. Res. 47, 3459–3470 (2014).
Katrun, P. et al. PhI(OAc)2/KI-mediated reaction of aryl sulfinates with alkenes, alkynes and α,β-unsaturated carbonyl compounds: synthesis of vinyl sulfones and β-iodovinyl sulfones. Eur. J. Org. Chem. 5633–5641 (2010).
Tang, S. et al. Revealing the metal-like behavior of iodine: aniodide-catalysed radical oxidative alkenylation. Chem. Commun. 50, 4496–4499 (2014).
Nassoy, A. M. A., Raubo, P. & Harrity, J. P. A. Synthesis and indole coupling reactions of azetidine and oxetane sulfinate salts. Chem. Commun. 51, 5914–5916 (2015).
Jiang, Q. et al. Copper-catalyzed decarboxylative sulfonylation of α,β-unsaturated carboxylic acids. J. Org. Chem. 79, 7372–7379 (2014).
Li, H. S. & Liu, G. Copper/silver-mediated cascade reactions for the construction of 2-sulfonylbenzo[b]furans from trans-2-hydroxycinnamic acids and sodium sulfonates. J. Org. Chem. 79, 509–516 (2014).
Kumar, A. & Muthyala, M. K. 1-Butyl-3-methylimidazolium p-toluenesulfinate: a novel reagent for synthesis of sulfones and β-ketosulfones in ionic liquid. Tetrahedron Lett. 52, 5368–5370 (2011).
Markitanov, Y. M., Timoshenko, V. M. & Shermolovich, Y. G. β-Keto sulfones: preparation and application in organic synthesis. J. Sulfur Chem. 35, 188–236 (2014).
Bartlett, P. A., Green, F. R. III & Rose, E. H. Synthesis of acetylenes from carboxylic acid derivatives via beta-keto sulfones. J. Am. Chem. Soc. 100, 4852–4858 (1978).
Ihara, M., Suzuki, S., Taniguchi, T., Tokunaga, Y. & Fukumoto, K. Preparation of olefins and acetylenes via reductive elimination with SmI2-HMPA. Tetrahedron 51, 9873–9890 (1995).
Baldwin, J. E., Adlington, R. M., Crouch, N. P., Hill, R. L. & Laffey, T. G. An expedient synthesis of trisubstituted allenes. Tetrahedron Lett. 36, 7925–7928 (1995).
Sengupta, S., Sarma, D. S. & Mondal, S. γ-Chiral β-ketosulfones in asymmetric synthesis: a unified synthetic strategy for enantiopure γ-amino and γ-hydroxy vinyl. Tetrahedron: Asymmetry 9, 2311–2316 (1998).
Yang, H., Carter, R. G. & Zakharov, L. N. Enantioselective total synthesis of lycopodine. J. Am. Chem. Soc. 130, 9238–9239 (2008).
Rawat, V. S., Perla L. M. Reddy, P. L. M. & Sreedhar, B. Chemoselective one-pot synthesis of β-keto sulfones from ketones. RSC Adv. 4, 5165–5168 (2014).
Singh, A. K., Chawla, R., Keshari, T., Yadav, V. K. & Yadav, L. D. S. Aerobic oxysulfonylation of alkenes using thiophenols: an efficient one-pot route to β-ketosulfones. Org. Biomol. Chem. 12, 8550–8554 (2014).
Tsui, G. C., Glenadel, Q., Lau, C. & Lautens, M. Rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitriles: efficient synthesis of (Z)-β-sulfonylvinylamines and β-keto sulfones. Org. Lett. 13, 208–211 (2011).
Kumar, D., Sundaree, S., Rao, V. S. & Varma, R. S. A facile one-pot synthesis of β-keto sulfones from ketones under solvent-free conditions. Tetrahedron Lett. 47, 4197–4199 (2006).
Xie, Y. Y. & Chen, Z. C. Hypervalent iodine in synthesis. 66. One pot preparation of β-keto sulfones by reaction of ketones, [hydroxy (tosyloxy) iodo] benzene and sodium sulfonates. Synth. Comm. 31, 3145–3149 (2001).
Ramaiah, K. A facile phase-transfer catalyzed synthesis of some β-keto sulfones. Indian J. Chem. B 38, 297–301 (1999).
Suryakiran, N., Reddy, T. S., Ashalatha, K., Lakshman, M. & Venkateswarlu, Y. Facile polyethylene glycol (PEG-400) promoted synthesis of β-ketosulfones. Tetrahedron Lett. 47, 3853–3856 (2006).
Lu, Q. Q. et al. Dioxygen-triggered oxidative radical reaction: direct aerobic difunctionalization of terminal alkynes toward β-keto sulfones. J. Am. Chem. Soc. 135, 11481–11484 (2013).
Singh, A. K., Chawla, R. & Yadav, L. D. S. A direct approach to β-keto sulfones via AgNO3/K2S2O8 catalyzed aerobic oxysulfonylation of alkenes in aqueous medium. Tetrahedron Lett. 55, 4742–4746 (2014).
Wendlandt, A. E., Suess, A. M. & Stahl, S. S. Copper-catalyzed aerobic oxidative C-H functionalizations: trends and mechanistic insights. Angew. Chem., Int. Ed. 50, 11062–11087 (2011).
Tang, X. D. et al. Copper-catalyzed sulfonamides formation from sodium sulfinates and amines. Chem. Commun. 49, 6102–6104 (2013).
Xu, Y. L., Tang, X. D., Hu, W. G., Wu, W. Q. & Jiang, H. F. Transition-metal-free synthesis of vinyl sulfones via tandem cross-decarboxylative/coupling reactions of sodium sulfinates and cinnamic acids. Green Chem. 16, 3720–3723 (2014).
Zhang, X. S., Wang, M., Lia, P. H. & Wang, L. n-Bu4NI/TBHP-catalyzed direct amination of allylic and benzylic C(sp3)–H with anilines under metal-free conditions. Chem. Commun. 50, 8006–8009 (2014).
Evans, R. W., Zbieg, J. R., Zhu, S. L., Li, W. & MacMillan, D. W. C. Simple catalytic mechanism for the direct coupling of α-carbonyls with functionalized amines: a one-step synthesis of plavix. J. Am. Chem. Soc. 135, 16074–16077 (2013).
Kornblum, N. et al. A new and selective method of oxidation. J. Am. Chem. Soc. 79, 6562–6562 (1957).
Chen, J., Sun, Y., Liu, B., Liu, D. & Cheng, J. The palladium-catalyzed desulfitative cyanation of arenesulfonyl chlorides and sodium sulfonates. Chem. Commun. 48, 449–451 (2012).
Doyle, M. P. et al. Hydrolysis of tosyl esters initiated by an electron transfer from photoexcited electron-rich aromatic compounds. J. Org. Chem. 53, 3386–3387 (1988).
Shi, S. L. & Buchwald, S. L. Copper-catalysed selective hydroamination reactions of alkynes. Nat. Chem. 7, 38–44 (2015).
Watari, R., Kayaki, Y., Hirano, S., Matsumoto, N. & Ikariya, T. Hydrogenation of carbon dioxide to formate catalyzed by a copper/1,8-diazabicyclo[5.4. 0]undec-7-ene system. Adv. Synth. Catal. 357, 1369–1373 (2015).
Giri, R. & Hartwig, J. F. Cu(I)–amido complexes in the Ullmann reaction: reactions of Cu(I)–amido complexes with iodoarenes with and without autocatalysis by CuI. J. Am. Chem. Soc. 132, 15860–15863 (2010).
Huo, H. H., Wang, C. Y., Harms, K. & Meggers, E. Enantioselective, catalytic trichloromethylation through visible light-activated photoredox catalysis with a chiral iridium complex. J. Am. Chem. Soc. 137, 9551–9554 (2015).
Drapeau, M. P. et al. Transition-metal-free α-arylation of enolizable aryl ketones and mechanistic evidence for a radical process. Angew. Chem., Int. Ed. 54, 10587–10591 (2015).
Acknowledgements
This work was supported financially by the Natural Science Foundation of China (21172227).
Author information
Authors and Affiliations
Contributions
X.W.L. and N.X.W. wrote the main manuscript text and C.B.B., W.Z., Y.X., Y.J.W. and Y.H.L. prepared figure and J.L.W. prepared NMR spectra. All authors reviewed the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Lan, XW., Wang, NX., Bai, CB. et al. Ligand-Mediated and Copper-Catalyzed C(sp3)-H Bond Functionalization of Aryl Ketones with Sodium Sulfinates under Mild Conditions. Sci Rep 5, 18391 (2015). https://doi.org/10.1038/srep18391
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep18391
- Springer Nature Limited