Abstract
The existence of the heaving plates can improve the heaving motion performance of an offshore structure significantly by providing both extra added mass and damping. In the current research, numerical investigation is carried out on the hydrodynamic characteristics of both isolated square heaving plate and double square heaving plates with opening by an immersed boundary-lattice Boltzmann method. The effects on hydrodynamic performance of plates due to Keulegan-Carpenter (KC) number, frequency number, opening ratio, opening distribution and spacing of plates are examined. It is found that the heaving plates with optimized opening ratio can provide additional damping compared with the plates without opening. Better hydrodynamic characteristics of double plates can be obtained with the increase of plate spacing.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chen, S.Y. and Doolen, G.D., 1998. Lattice Boltzmann method for fluid flows, Annual Review of Fluid Mechanics, 30, 329–364.
Chorin, A.J., 1967. A numerical method for solving incompressible viscous flow problems, Journal of Computational Physics, 2(1), 12–26.
Chua, K.H., Clelland, D., Huang, S. and Sworn, A., 2005. Model experiments of hydrodynamic forces on heave plates, Proceedings of the 24th International Conference on Offshore Mechanics and Arctic Engineering, ASME, Halkidiki, Greece.
d’Humières, D., 2002. Multiple-relaxation-time lattice Boltzmann models in three dimensions, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 360(1792), 437–451.
Downie, M., Graham, J.M.R., Hall, C., Incecik, A. and Nygaard, I., 2000. An experimental investigation of motion control devices for truss spars, Marine Structures, 13(2), 75–90.
Feng, Z.G. and Michaelides, E.E., 2005. Proteus: a direct forcing method in the simulations of particulate flows, Journal of Computational Physics, 202(1), 20–51.
Guo, Z.L., Zheng, C.G. and Shi, B.C., 2002. Discrete lattice effects on the forcing term in the lattice Boltzmann method, Physics Review E, 65(4), 046308.
Holmes, S., Bhat, S., Beynet, P., Sablok, A. and Prislin, I., 2001. Heave plate design with computational fluid dynamics, Journal of Offshore Mechanics and Arctic Engineering, 123(1), 22–28.
Jeong, J. and Hussain, F., 1995. On the identification of a vortex, Journal of Fluid Mechanics, 285, 69–94.
Ji, H.T., Huang, G.L. and Fan, J., 2003. The forced oscillation tests on heave damping plates, Journal of Shanghai Jiaotong University, 37(7), 977–980. (in Chinese)
Lallemand, P. and Luo, L.S., 2000. Theory of the lattice Boltzmann method: dispersion, dissipation, isotropy, Galilean invariance, and stability, Physics Review E, 61(6), 6546–6562.
Li, J.X., Liu, S.X., Zhao, M. and Teng, B., 2013. Experimental investigation of the hydrodynamic characteristics of heave plates using forced oscillation, Ocean Engineering, 66, 82–91.
Patankar, S.V. and Spalding, D.B., 1972. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows, International Journal of Heat and Mass Transfer, 15(10), 1787–1806.
Prislin, I., Blevins, R. and Halkyard, J., 1998. Viscous damping and added mass of solid square plates, Proceedings of the 17th International Conference on Offshore Mechanics and Arctic Engineering, ASME, Lisbon, Portugal.
Rohde, M., Kandhai, D., Derksen, J.J. and van der Akker, H.E. A., 2006. A generic, mass conservative local grid refinement technique for lattice-Boltzmann schemes, International Journal for Numerical Methods in Fluids, 51(4), 439–468.
Roos, F.W. and Willmarth, W.W., 1971. Some experimental results on sphere and disk drag, AIAA Journal, 9(2), 285–291.
Shen, W.J., Tang, Y.G. and Liu, L.Q., 2012. Research on the hydrodynamic characteristics of heave plate structure with different form edges of a spar platform, China Ocean Engineering, 26(1), 177–184.
Shenoy, A.R. and Kleinstreuer, C., 2008. Flow over a thin circular disk at low to moderate Reynolds numbers, Journal of Fluid Mechanics, 605, 253–262.
Tao, L., Molin, B., Scolan, Y.M. and Thiagarajan, K., 2007. Spacing effects on hydrodynamics of heave plates on offshore structures, Journal of Fluids and Structures, 23(8), 1119–1136.
Tao, L.B. and Dray, D., 2008. Hydrodynamic performance of solid and porous heave plates, Ocean Engineering, 35(10), 1006–1014.
Tao, L.B. and Thiagarajan, K., 2003. Low KC flow regimes of oscillating sharp edges I. Vortex shedding observation, Applied Ocean Research, 25(1), 21–35.
Thiagarajan, K.P. and Troesch, A.W., 1998. Effects of appendages and small currents on the hydrodynamic heave damping of TLP columns, Journal of Offshore Mechanics and Arctic Engineering, 120(1), 37–42.
Tian, X.L., Xiao, L.F., Zhang, X.D., Yang, J.M., Tao, L.B. and Yang, D., 2017. Flow around an oscillating circular disk at low to moderate Reynolds numbers, Journal of Fluid Mechanics, 812, 1119–1145.
Wu, W.W., Miao, Q.M., Kuang, X.F., Yang, L. and He, Z.M., 2009. Research on hydrodynamic characteristics of forced oscillation heave damping plates of Spar platforms, Journal of Ship Mechanics, 13(1), 27–33. (in Chinese)
Yang, J.M., Tian, X.L. and Li, X., 2014. Hydrodynamic characteristics of an oscillating circular disk under steady in-plane current conditions, Ocean Engineering, 75, 53–63.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: This study was financially supported by the National Natural Science Foundation of China (Grant Nos. 51490672 and 51879039).
Rights and permissions
About this article
Cite this article
Cong, Lf., Teng, B. Hydrodynamic Characteristics of Square Heaving Plates with Opening Under Forced Oscillation. China Ocean Eng 33, 637–648 (2019). https://doi.org/10.1007/s13344-019-0063-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13344-019-0063-z