Abstract
Dynamic uniaxial and multiaxial tests were conducted to characterize the mechanical behavior of poly(methyl methacrylate) (PMMA). In this case, the multiaxial yield behavior of materials can be captured by the shear-compression samples (SCS). The experimental results were compared with different yield criteria, and which does not have a good agreement between theoretical prediction and experimental yield loci of PMMA undergoing combined shear-compression. Therefore, a phenomenological yield criterion is developed, and it notably involves hydrostatic stress sensitivity, lode angle, and one parameter. The parameter can be expressed by the asymmetry of yield strength between the tension and compression. The proposed criterion was verified by the utilization of differently combined shear-compression tests. The investigative results reveal that the proposed criterion can be successfully applied to describe the complex yield behavior of PMMA under dynamic loading conditions. The present study shows an efficient method to develop yield criterion of the reviewed materials.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. S. M. G. A. Katana, Int. J. Polym. Mater. Polym. Biomater., 60, 115 (2010).
E. S. Park, E. B. Cho, and D. Kim, Macromol. Res., 15, 617 (2007).
W. Chen, F. Lu, and M. Cheng, Polym. Test., 21, 113 (2002).
E. M. Arruda, M. C. Boyce, and R. Jayachandran, Mech. Mater., 19, 193 (1995).
D. Rittel, and A. Dorogoy, J. Mech. Phys. Solids, 56, 3191 (2008).
M. Jerabek, Z. Major, and R. W. Lang, Polym. Test., 29, 302 (2010).
P. Yu, X. Yao, S. Tan, and Q. Han, Macromol. Mater. Eng., 301, 469 (2016).
L. H. Zhang, X. H. Yao, S. G. Zang, and Q. Han, Mater. Design, 65, 1181 (2015).
P. Forquin, M. Nasraoui, A. Rusinek, and L. Siad, Int.. J. Impact Eng., 40, 46 (2012).
M. Nasraoui, P. Forquin, L. Siad, and A. Rusinek, Mater. Design, 37, 500 (2012).
T. Jin, Z. Zhou, Z. Wang, G. Wu, Z. Liu, and X. Shu, Polym. Testing, 42, 181 (2015).
Z. Zhou, B. Su, Z. Wang, Z. Li, X. Shu, and L. Zhao, Mater. Lett., 109, 151 (2013).
L. Holliday, J. Mann, G. A. Pogany, H. L. D. Pugh, and D. A. Gunn, Nature, 202, 381 (1964).
L. W. Hu, and K. D. Pae, J. Franklin Institute, 275, 491 (1963).
A. A. Silano, S. K. Bhateja, and K. D. Pae, Int.. J. Polym. Mater. Polym. Biomater., 3, 117 (1974).
B. Farrokh and A. S. Khan, Europ. J. Mech. A Solids, 29, 274 (2010).
Y. K. Lee and J. Ghosh, Int. J. Plasticity, 12, 1179 (1996).
K. D. Pae, J. Mater. Sci., 12, 1209 (1977).
O. Cazacu and F. Barlat, Int.. J. Plasticity, 20, 2027 (2004).
Z. H. Stachurski, Prog. Polym. Sci., 22, 407 (1997).
M. Vural, G. Ravichandran, and D. Rittel, Metall. Mater. Trans. A, 34, 2873 (2003).
A. Dasari and R. D. K. Misra, Mater. Sci. Eng. A, 358, 356 (2003).
E. Ghorbel, Int. J. Plasticity, 24, 2032 (2008).
R. Quinson, J. Perez, M. Rink, and A. Pavan, J. Mater. Sci., 32, 1371 (1997).
A. J. Lesser and R. S. Kody, J. Polym. Sci. Part B: Polym. Phys., 35, 1611 (2015).
X. Xiao, Polym. Test., 27, 164 (2008).
Acknowledgments
The authors would like to thank the National Natural Science Foundation of China (Grant Nos. 11802199, 11772217, 11702182, 11772215), the Natural Science Foundation for Young Scientists of Shanxi Province, China (Grant No. 201801D221026). Tao Jin is grateful to the support from the Open Fund of State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’An Jiaotong University (SV2019-KF-15).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qiu, J., Jin, T., Su, B. et al. A Criterion Describing the Dynamic Yield Behavior of PMMA. Macromol. Res. 27, 750–755 (2019). https://doi.org/10.1007/s13233-019-7161-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-019-7161-x