Abstract
With the purpose of preparing an anti-bacterial adhesion dental resin, two silicone methacrylates (SMAs) were synthesized. After being confirmed by the FT-IR and 1H-NMR spectra, the SMAs were incorporated into commonly used Bis-GMA/TEGDMA (50/50, wt./wt.) dental resin systems with an incremental series of concentrations. Physicochemical properties, anti-bacterial adhesion effect, and protein adsorption were tested. The results showed that SMAs had no influence on the double bond conversion of dental resin, and could decrease volumetric shrinkage of dental resin. Because of the increased hydrophobicity and reduced surface free energy, SMAs containing cured resin had resistance to mucin adsorption and anti-adhesion effect against S. mutans. However, flexural properties, water sorption and solubility of dental resin were impaired after introducing SMAs. Therefore, further research should be undertaken to improve these properties by utilizing appropriate inorganic fillers.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
Not applicable.
References
Li S, Yu X, Liu F, Deng F, He J (2020) Synthesis of antibacterial dimethacrylate derived from niacin and its application in preparing antibacterial dental resin system. J Mech Behav Biomed Mater 102:103521
Xiao YH, Chen JH, Fang M, Xing XD, Wang H, Wang YJ, Li F (2008) Antibacterial effects of three experimental quaternary ammonium salt (QAS) monomers on bacteria associated with oral infections. J Oral Sci 50:323–327
Svanberg M, Mjor IA, Orstavik D (1990) Mutans streptococci in plaque from margins of amalgam, composite, and glass-ionomer restorations. J Dent Res 69:861–864
Beyth N, Domb AJ, Weiss EI (2007) An in vitro quantitative antibacterial analysis of amalgam and composite resins. J Dent 35:201–206
Kopperud SE, Tveit AB, Gaarden T, Sandvik L, Espelid I (2012) Longevity of posterior dental restorations and reasons for failure. Eur J Oral Sci 120:539–548
Demarco FF, Correa MB, Cenci MS, Moraes RR, Opdam NJ (2012) Longevity of posterior composite restorations: not only a matter of materials. Dent Mater 28:87–101
Rho YJ, Namgung C, Jin BH, Lim BS, Cho BH (2013) Longevity of direct restorations in stress-bearing posterior cavities: a retrospective study. Oper Dent 38:572–582
Yin M, Guo S, Liu F, He J (2015) Synthesis of fluorinated dimethacrylate monomer and its application in preparing Bis-GMA free dental resin. J Mech Behav Biomed Mater 51:337–344
Jiao Y, Niu LN, Ma S, Li J, Tay FR, Chen JH (2017) Quaternary ammonium-based biomedical materials: state-of-the-art, toxicological aspects and antimicrobial resistance. Prog Polym Sci 71:53–90
Chen L, Sun BI, Yang J (2018) Antibacterial dental restorative materials: a review. Am J Dent 31:6B–12B
Xue J, Wang J, Feng D, Huang H, Wang M (2020) Application of antimicrobial polymers in the development of dental resin composite. Molecules 25:4738
Zhang Y, Chen Y, Hu Y, Huang F, Xiao Y (2018) Quaternary ammonium compounds in dental restorative materials. Dent Mater J 37:183–191
Wang L, Xie X, Imazato S, Weir MD, Reynolds MA, Xu HHK (2016) A protein-repellent and antibacterial nanocomposite for class-V restoration to inhibit periodontitis-related pathogens. Mater Sci Eng C 67:702–710
Cao L, Xie X, Wang B, Weir MD, Oates TW, Xu HHK, Zhang N, Bai Y (2018) Protein-repellent and antibacterial effects of a novel polymethyl methacrylate resin. J Dent 79:39–45
Kang S, Lee M, Kang M, Noh M, Jeon J, Lee Y, Seo JH (2016) Development of antibiofouling interface on hydroxyapatite surface by coating zwitterionic MPC polymers containing calcium-binding moieties to prevent oral bacterial adhesion. Acta Biomater 40:70–77
Koyama J, Fukazawa K, Ishihara K, Mori Y (2019) In situ surface modification on dental composite resin using 2-methacryloyloxyethyl phosphorylcholine polymer for controlling plaque formation. Mater Sci Eng C 104:109916
Gyo M, Nikaido T, Okada K, Yamauchi J, Tagami J, Matin K (2008) Surface response of fluorine polymer-incorporated resin composites to cariogenic biofilm adherence. Appl Environ Microbiol 74:1428–1435
Thongthai P, Kitagawa H, Kitagawa R, Hirose N, Noree S, Iwasaki Y, Imazato S (2020) Development of novel surface coating composed of MDPB and MPC with dual functionality of antibacterial activity and protein repellency. J Biomed Mater Res Part B Appl Biomater 108:3241–3249
Peng L, Chang L, Liu X, Lin J, Liu H, Han B, Wang S (2017) Antibacterial property of a polyethylene glycol-grafted dental materials. ACS Appl Mater Interfaces 9:17688–17692
Pereni CI, Zhang Q, Liu Y, Abel E (2006) Surface free energy effect on bacterial retention. Colloids Surf B: Biointerfaces 48:143–147
Poggio C, Arciola CR, Rosti F, Scribante A, Saino E, Visai L (2009) Adhesion of streptococcus mutans to different restorative materials. Int J Artif Organs 32:671–677
Verghese B, Lok M, Wen J, Alessandria V, Chen Y, Kathariou S, Knabel S (2011) comK prophage junction fragments as markers for listeria monocytogenes genotypes unique to individual meat and poultry processing plants and a model for rapid niche-specific adaptation, biofilm formation, and persistence. Appl Environ Microbiol 77:3279–3292
Quirynen M, Marechal M, Busscher HJ, Weerkamp AH, Darius PL, van Steenberghe D (1990) The influence of surface free energy and surface roughness on early plaque formation. J Clin Pharm Therapeut 17:138–144
Uyen M, Busscher HJ, Weerkamp AH, Arends J (1985) Surface free energies of oral streptococci and their adhesion to solids. FEMS Microbiol Lett 30:103–106
Palin WM, Fleming GJP, Burke FJT, Marquis PM, Randall (2005) The influence of short and medium-term water immersion on the hydrolytic stability of novel low-shrinkage dental composites. Dent Mater 21:852–863
He J, Luo Y, Liu F, Jia D (2010) Synthesis and characterization of a new trimethacrylate monomer with low polymerization shrinkage and its application in dental restorative materials. J Biomater Appl 25:235–249
He J, Luo Y, Liu F, Jia D (2010) Synthesis, characterization and photopolymerization of a new dimethacrylate monomer based on (α-methyl-benzylidene)bisphenol used as root canal sealer. J Biomater Sci Polym Ed 21:1191–1205
Kielkopf CL, Bauer W, Urbatsch IL (2020) Bradford assay for determining protein concentration. Cold Spring Harb Symp Quant Biol 2020:102269
Santiago A, Irusta L, Schafer T, Corres A, Martine L, Gonzalez A (2016) Resistance to protein sorption as model of antifouling performance of poly(siloxane-urethane) coating exhibiting phase separated morphologies. Prog Org Coat 99:110–116
Zhang P, Chen H, Zhang L, Zhang D (2016) Anti-adhesion effects of liquid-infused textured surfaces on high-temperature stainless steel for soft tissue. Appl Surf Sci 385:249–256
Kim YS, Cho HJ, Lee H, Kim WY, Jung YC, Lee SY (2020) Development of a multi-functional acrylic urethane coating with high hardness and low surface energy. Prog Org Coat 147:105748
Wang H, Wang K, Lu H, Parkin IP, Zhang X (2020) Flexible and strong robust superhydrophobic monoliths with antibacterial property. ACS Appl Pol Mater 2:4856–4863
Alshali RZ, Silikas N, Satterthwaite JD (2013) Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals. Dent Mater 29:e213–e217
Luo S, Liu F, He J (2019) Preparation of low shrinkage stress dental composite with synthesized diemthacrylate oligomers. J Mech Behav Biomed Mater 94:222–228
Liu F, He J, Lin Z, Lin J, Jia D (2006) Synthesis and characterization of dimethacrylate monomer with high molecular weight for root canal filling materials. Molecules 11:953–958
Alsagob EI, Bardwell DN, Ali AO, Khayat SG, Stark PC (2018) Comparison of microleakage between bulk-fill flowable and nanofilled resin-based composites. Interv Med Appl Sci 10:102–109
Xiong J, Sun X, Li Y, Chen J (2011) Polymerization shrinkage, stress, and degree of conversion in silorane- and dimethacrylate-based dental composites. J Appl Polym Sci 122:1882–1888
Patel MP, Braden M, Davy KWM (1987) Polymerization shrinkage of methacrylate esters. Biomaterials 8:53–56
Dewaele M, Truffier-Boutry D, Devaux J, Leloup G (2006) Volumetric contraction in photocured dental resins: the shrinkage-conversion relationship revisited. Dent Mater 22:395–365
Luo S, Liu F, Yu B, He J (2019) Preparation of low shrinkage stress Bis-GMA free dental resin composites with a synthesized urethane dimethacrylate monomer. J Biomater Sci Polym Ed 30:137–149
He J, Liao L, Liu F, Luo Y, Jia D (2010) Synthesis and characterization of a new dimethacrylate monomer based on 5,5′-bis(4-hydroxylphenyl)-hexahydro-4,7-methanoindan for root canal sealer application. J Mater Sci Mater Med 21:1135–1142
He J, Garoushi S, Vallittu PK, Lassila L (2018) Effect of low-shrinkage monomers on physicochemical properties of experimental composite resin. Acta Biomaterialia Odontologica Scandinavica 4:30–37
Asmussen E, Peutzfeldt A (1998) Influence of UEMDA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 14:51–56
Liao X, Söderling E, Liu F, He J, Lassila LVJ, Vallittu PK (2014) Optimizing the concentration of quaternary ammonium dimethacrylate monomer in bis-GMA/TEGDMA dental resin system for antibacterial activity and mechanical properties. J Mater Sci Mater Med 25:1387–1393
Yin M, Liu F, He J (2016) Preparation and characterization of Bis-GMA free dental resin system with synthesized dimethacrylate monomer TDDMMA derived from tricyclo[5.2.1.0(2,6)]decanedimethanol. J Mech Behav Biomed Mater 57:157–163
Hansel C, Leyhausen G, Mai UEH, Geurtsen W (1998) Effects of various resin composite (co)monomers and extracts on two caries associated micro-organisms in vitro. Dent Mater 77:60–67
Liu D, Liu F, He J, Lassila LVJ, Vallittu PK (2013) Synthesis of a novel tertiary amine containing urethane dimethacrylate monomer (UDMTA) and its application in dental resin. Journal of Materials Sicence: Materials in Medicine 24:1595–1603
Ferracane JL (1994) Elution of leachable components from composites. J Oral Rehabil 21:441–452
Engel AS, Kranz HT, Scheider M, Tietze JP, Piwowarcyk A, Kuzius T et al (2020) Biofilm formation on different dental restorative materials in oral cavity. BMC Oral Health 20:162
Busscher HJ, Rinastiti M, Siswomihardjo W, van der Mei HC (2010) Biofilm formation on dental restorative and implant materials. J Dent Res 89:657–665
Khan AU, Islam B, Khan SN, Akram M (2011) A proteomic approach for exploring biofilm in Streptococcus mutans. Bioinformation 5:440–445
Krzyściak W, Jurczak A, Kościelniak D, Bystrowska B, Skalniak A (2014) The virulence of Streptococcus mutans and the ability to form biofilms. Eur J Clin Microbiol Infect Dis 33:499–515
Tamura S, Yonezawa H, Motegi M, Nakao R, Yoneda S, Watanabe H, Yamazaki T, Senpuku H (2009) Inhibiting effects of Streptococcus salivarius on competence-stimulating peptide-dependent biofilm formation by Streptococcus mutans. Oral Microbiol Immunol 24:152–161
Humphrey SP, Williamson RT (2001) A review of saliva: Normal composition, flow, and function. J Prosthet Dent 85:162–169
Sarkar A, Xu F, Lee S (2019) Human saliva and model saliva at bulk to adsorbed phases-similarities and differences. Adv Colloid Interf Sci 273:102034
Mothey D, Buttaro BA, Piggot PJ (2014) Mucin can enhance growth, biofilm formation and survival of Streptococcus mutans. FEMS Microbiol Lett 350:161–167
Stallard CP, McDonnell KA, Onayemi OD, O’Gara JP, Dowling DP (2012) Evaluation of protein adsorption on atmospheric plasma deposited coatings exhibiting surperhydrophilic to superhydrophobic properties. Biointerphases 7:31–43
Absolom DR, Lamberti FV, Policova Z, Zingg W, van Oss CJ, Neumann AW (1983) Surface thermodynamics of bacterial adhesion. Appl Environ Microbiol 46:90–97
Acknowledgments
This work was funded by the National Natural Science Foundation of China (No.81970974, No.82071162), and Guangdong Financial Fund for High-Caliber Hospital Construction (174-2018-XMZC-0001-03-0125/D-15).
Code Availability
Not applicable.
Author information
Authors and Affiliations
Contributions
Hui Tong: Methodology, Investigation, Writing – Original Draft.
Muzi Liao: Methodology, Investigation, Writing – Original Draft.
Xiangya Huang: Methodology, Writing – Review & Editing.
Fang Liu: Writing – Review & Editing.
Sui Mai: Supervision, Writing – Review & Edition.
Jingwei He: Conceptualization, Supervision, Writing – Review & Edition.
Corresponding authors
Ethics declarations
Ethics Approval
Not applicable.
Consent to Participate
Not applicable.
Consent for Publication
Not applicable.
Conflict of Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tong, H., Liao, M., Huang, X. et al. Physicochemical Properties, Anti-Adhesion Effect against S. mutans, and Resistance to Mucin Adsorption of Dental Resins Contained Synthesized Silicone Methacrylates. Silicon 14, 5835–5845 (2022). https://doi.org/10.1007/s12633-021-01344-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-01344-5