Abstract
Unbalance, misalignment, partial rub, looseness and bent rotor are one of the most commonly observed faults in rotating machines. These faults cause breakdowns in rotating machinery and create undesired vibrations while operating. In this study, an approach to detect combined fault of unbalance and bent rotors for advance detection of the features of the fault rotors diagnosis is proposed. Empirical mode decomposition (EMD) is used efficiently to decompose the complex vibration signals of rotating machinery into a known number of intrinsic mode functions so that the fault characteristics of the unbalanced and bowed shaft can be examined in the time-frequency Hilbert spectrum. A test bench of Spectra-Quest has been used for performing experiments to illustrate the unbalance and the bent rotor conditions as well as the healthy rotor condition. Analysis of the results shows the usefulness of proposed approach in diagnosing the unbalance and bowed fault of the shaft in rotating machinery.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. S. Sekhar, Identification of unbalance and crack acting simultaneously in a rotor system: Modal expansion versus reduced basis dynamic expansion, Journal of Vibration and Control, 11 (9) (2005) 1125–1145.
Y. Peng, M. Dong and M. J. Zuo, Current status of machine prognostics in condition-based maintenance: a review, The International Journal of Advanced Manufacturing Technology, 50 (1–4) (2010) 297–313.
N. Bachschmid, P. Pennacchi and A. Vania, Thermally induced vibrations due to rub in real rotors, Journal of Sound and Vibration, 299 (4–5) (2007) 683–719.
A. R. Mohanty, A. S. Sekhar and S. Prabhakar, Vibration analysis of a misaligned rotor-coupling-bearing system passing through the critical speed, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (12) (2001) 1417–1428.
Z. Su, Y. Zhang, M. Jia, F. Xu and J. Hu, Gear fault identification and classification of singular value decomposition based on Hilbert-Huang transform, Journal of Mechanical Science and Technology, 25 (2) (2011) 267–272.
J. K. Dutt and B. C. Nakra, Stability of rotor systems with viscoelastic supports, Journal of Sound and Vibration, 153 (1) (1992) 89–96.
G. Genta and F. De Bona, Unbalance response of rotors: A modal approach with some extensions to damped natural systems, Journal of Sound and Vibration, 140 (1) (1990) 129–153.
S. Edwards, A. W. Lees and M. I. Friswell. The identification of a rotor bend from vibration measurements, Society for Experimental Mechanics, IMAC XVI — 16th International Modal Analysis Conference, 1998 (1998).
S. Edwards, A. Lees and M. Friswell, Fault diagnosis of rotating machinery, Shock and Vibration Digest, 30 (1998) 4–13.
J. C. Nicholas, E. J. Gunter and P. E. Allaire, Effect of residual shaft bow on unbalance response and balancing of a single mass flexible rotor Part I- Unbalance response, J Eng Power Trans ASME, 98 Ser A (1976) 182–189.
J. C. Nicholas, E. J. Gunter and P. E. Allaire, Effect of residual shaft bow on unbalance response and balancing of a single mass flexible rotor Part II -Balancing, J Eng Power Trans ASME, 98 Ser A (1976) 171–181.
A. G. Parkinson, M. S. Darlow and A. J. Smalley, Balancing flexible rotating shafts with an initial bend, AIAA Journal, 22 (5) (1984) 683–689.
W. L. Meacham, P. B. Talbert, H. D. Nelson and N. K. Cooperrider, Complex modal balancing of flexible rotors including residual bow, Journal of Propulsion and Power, 4 (3) (1988) 245–251.
R. D. Flack, J. H. Rooke, J. R. Bielk and E. J. Gunter, Comparison of the unbalance responses of Jeffcott rotors with shaft bow and shaft runout, Journal of Mechanical Design, 104 (1982) 318–328.
D. Salamone and E. Gunter, Synchronous unbalance response of an overhung rotor with disk skew, Journal of Engineering for Power, 102 (1980) 749–755.
C. W. Lee, Vibration analysis of rotors, Kluwer Academic, Dordrecht (1993).
F. F. Ehrich, Handbook of rotor dynamics, McGraw — Hill Inc, New York (1992).
J. S. Rao, A note on Jeffcott warped rotor, Mechanism and Machine Theory, 36 (5) (2001) 563–575.
J. S. Rao and M. Sharma, Dynamic analysis of bowed rotors, Advances in Vibration Engineering, 2 (2) (2003) 1–14.
Y. Ruqiang and R. X. Gao, Hilbert-huang transform-based vibration signal analysis for machine health monitoring, Instrumentation and Measurement, IEEE Transactions on, 55 (6) (2006) 2320–2329.
N. E. Huang, Z. Shen, S. R. Long, M. C. Wu, H. H. Shih, Q. Zheng, N. C. Yen, C. C. Tung and H. H. Liu, The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 454 (1971) (1998) 903–995.
L. Satish, Short-time Fourier and wavelet transforms for fault detection in power transformers during impulse tests, IEE Proceedings: Science, Measurement and Technology, 145 (2) (1998) 77–84.
K. Mori, N. Kasashima, T. Yoshioka and Y. Ueno, Prediction of spalling on a ball bearing by applying the discrete wavelet transform to vibration signals, Wear, 195 (1–2) (1996) 162–168.
W. Changting and R. X. Gao, Wavelet transform with spectral post-processing for enhanced feature extraction [machine condition monitoring], Instrumentation and Measurement, IEEE Transactions on, 52 (4) (2003) 1296–1301.
R. Yan and R. X. Gao, An efficient approach to machine health diagnosis based on harmonic wavelet packet transform, Robotics and Computer-Integrated Manufacturing, 21 (4–5) (2005) 291–301.
P. W. Tse, W.-X. Yang and H. Tam, Machine fault diagnosis through an effective exact wavelet analysis, Journal of Sound and Vibration, 277 (4) (2004) 1005–1024.
N. E. Huang, M.-L.C. Wu, S. R. Long, S. S. P. Shen, W. Qu, P. Gloersen and K. L. Fan, A confidence limit for the empirical mode decomposition and Hilbert spectral analysis, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 459 (2037) (2003) 2317–2345.
H. Hariharan, A. Gribok, M. A. Abidi and A. Koschan, Image fusion and enhancement via empirical mode decomposition, Journal of Pattern Recognition Research, 1 (1) (2006) 16–32.
J. I. Salisbury and M. Wimbush, Using modern time series analysis techniques to predict ENSO events from the SOI time series, Nonlinear Processes in Geophysics, 9 (3/4) (2002) 341–345.
P. A. Hwang, N. E. Huang and D. W. Wang, A note on analyzing nonlinear and nonstationary ocean wave data, Applied Ocean Research, 25 (4) (2003) 187–193.
N. E. Huang, A new spectral representation of earthquake data: Hilbert spectral analysis of station, Bulletin of the Seismological Society of America, 91 (5) (1991) 1310–1338.
S. T. Quek, P. S. Tua and Q. Wang, Detecting anomalies in beams and plate based on the Hilbert-Huang transform of real signals, Smart Materials and Structures, 12 (3) (2003) 447.
H. Huang and J. Pan, Speech pitch determination based on Hilbert-Huang transform, Signal Processing, 86 (4) (2006) 792–803.
Q. Gao, C. Duan, H. Fan and Q. Meng, Rotating machine fault diagnosis using empirical mode decomposition, Mechanical Systems and Signal Processing, 22 (5) (2008) 1072–1081.
T. Y. Wu and Y. L. Chung, Misalignment diagnosis of rotating machinery through vibration analysis via the hybrid EEMD and EMD approach, Smart Materials and Structures, 18 (9) (2009) 095004.
J. Cheng, D. Yu, J. Tang and Y. Yang, Application of frequency family separation method based upon EMD and local Hilbert energy spectrum method to gear fault diagnosis, Mechanism and Machine Theory, 43 (6) (2008) 712–723.
H. Li, Y. Zhang and H. Zheng, Hilbert-Huang transform and marginal spectrum for detection and diagnosis of localized defects in roller bearings, Journal of Mechanical Science and Technology, 23 (2) (2010) 291–301.
H. Dong, K. Qi, X. Chen, Y. Zi, Z. He and B. Li, Sifting process of EMD and its application in rolling element bearing fault diagnosis, Journal of mechanical science and technology, 23 (8) (2009) 2000–2007.
T. H. Patel and A. K. Darpe, Study of coast-up vibration response for rub detection, Mechanism and Machine Theory, 44 (8) (2009) 1570–1579.
B. Ramesh, S. Srikanth and A.S. Sekhar, Hilbert-Huang transform for detection and monitoring of crack in a transient rotor, Mechanical Systems and Signal Processing, 22 (4) (2008) 905–914.
C. Junsheng, Y. Dejie and Y. Yu, A fault diagnosis approach for roller bearings based on EMD method and AR model, Mechanical Systems and Signal Processing, 20 (2) (2006) 350–362.
X. Fan and M. J. Zuo, Gearbox fault detection using Hilbert and wavelet packet transform, Mechanical Systems and Signal Processing, 20 (4) (2006) 966–982.
K. Aharamuthu and E. P. Ayyasamy, Application of discrete wavelet transform and Zhao-Atlas-Marks transforms in non stationary gear fault diagnosis, Journal of Mechanical Science and Technology, 27 (3) (2013) 641–647.
H. Li, Y. Zhang and H. Zheng, Wear detection in gear system using Hilbert-Huang transform, Journal of Mechanical Science and Technology, 20 (11) (2006) 1781–1789.
B. Yang and C. S. Suh, Interpretation of crack-induced rotor non-linear response using instantaneous frequency, Mechanical Systems and Signal Processing, 18 (3) (2004) 491–513.
B. Boashash, Estimating and interpreting the instantaneous frequency of a signal. I. Fundamentals, Proceedings of the IEEE, 80 (4) (1992) 520–538.
D. Donnelly, The fast Fourier and Hilbert-Huang transforms: a comparison. in Computational Engineering in Systems Applications, IMACS Multi conference on, IEEE (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Editor Yeon June Kang
Navin Kumar is an Assistant Professor in the School of Mechanical Materials and Energy Engineering at Indian Institute of Technology (IIT), Ropar, India. Prior to joining IIT Ropar, he was working as a Research Scientist at Stevens Institute of Technology, New Jersey, USA. He did Masters in Mechanical Engineering from Indian Institute of Technology, Kharagpur, India and Ph.D. (Mechanical Engineering). Dr. Navin Kumar’s research interests are related to smart structures and materials, fault diagnosis and condition monitoring.
Sukhjeet Singh is a Research Scholar in the School of Mechanical Materials and Energy Engineering at Indian Institute of Technology, Ropar, India. He received his Bachelor’s (Mech Engg) and Master’s degree (Machine design) from the Punjab Technical University, Jalandhar, Punjab, India. His research interests include experimental aspects of vibration analysis, rotor dynamics, signal processing and machine learning techniques.
Rights and permissions
About this article
Cite this article
Singh, S., Kumar, N. Combined rotor fault diagnosis in rotating machinery using empirical mode decomposition. J Mech Sci Technol 28, 4869–4876 (2014). https://doi.org/10.1007/s12206-014-1107-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-014-1107-1