Abstract
Studies on determining and analyzing the crushing response of tubular structures are of significant interest, primarily due to their relation to safety. Several aspects of tubular structures, such as geometry, material, configuration, and hybrid structure, have been used as criteria for evaluation. In this review, a comprehensive analysis of the important findings of extensive research on understanding the crushing response of thin-walled tubular structures is presented. Advancements in thin-walled structures, including multi-cell tube, honeycomb and foam-filled, multi wall, and functionally graded thickness tubes, are also discussed, focusing on their energy absorption ability. An extensive review of experimentation and numerical analysis used to extract the deformation behavior of materials, such as aluminum and steel, against static and dynamic loadings are also provided. Several tube shapes, such as tubes of uniform and nonuniform (tapered) cross sections of circular, square, and rectangular shapes, have been used in different studies to identify their efficacy. Apart from geometric and loading parameters, the effects of fabrication process, heat treatment, and triggering mechanism on initiating plastic deformation, such as cutouts and grooves, on the surface of tubular structures are discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Hanssen A G, Langseth M, Hopperstad O S. Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler. International Journal of Impact Engineering, 2000, 24(5): 475–507
Baroutaji A, Sajjia M, Olabi A G. On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments. Thin-Walled Structures, 2017, 118: 137–163
Livermore Software Technology Corporation. LS-DYNA Keyword User’s Manual. 2007
Clausen A H, Hopperstad O S, Langseth M. Sensitivity of model parameters in stretch bending of aluminium extrusions. International Journal of Mechanical Sciences, 2001, 43(2): 427–453
Tarigopula V, Langseth M, Hopperstad O S, et al. Axial crushing of thin-walled high-strength steel sections. International Journal of Impact Engineering, 2006, 32(5): 847–882
Abramowicz W, Jones N. Dynamic axial crushing of square tubes. International Journal of Impact Engineering, 1984, 2(2): 179–208
Abramowicz W, Jones N. Dynamic progressive buckling of circular and square tubes. International Journal of Impact Engineering, 1986, 4(4): 243–270
Alexander J. An approximate analysis of the collapse of thin cylindrical shells under axial loading. Quarterly Journal of Mechanics and Applied Mathematics, 1960, 13(1): 10–15
Abramowicz W, Jones N. Dynamic axial crushing of circular tubes. International Journal of Impact Engineering, 1984, 2(3): 263–281
Hong W, Jin F, Zhou J, et al. Quasi-static axial compression of triangular steel tubes. Thin-Walled Structures, 2013, 62: 10–17
Wierzbicki T, Abramowicz W. On the crushing mechanics of thin-walled structures. Journal of Applied Mechanics, 1983, 50(4a): 727–734
Abramowicz W, Wierzbicki T. Axial crushing of multi corner sheet metal columns. Journal of Applied Mechanics, 1989, 56(1): 113–120
Sun F, Fan H. Inward-contracted folding element for thin-walled triangular tubes. Journal of Constructional Steel Research, 2017, 130: 131–137
Jones N. Energy-absorbing effectiveness factor. International Journal of Impact Engineering, 2010, 37(6): 754–765
Luo X, Xu J, Zhu J, et al. A new method to investigate the energy absorption characteristics of thin-walled metal circular tube using finite element analysis. Thin-Walled Structures, 2015, 95: 24–30
Abramowicz W, Jones N. Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically. International Journal of Impact Engineering, 1997, 19(5–6): 415–437
Moalem D, Sideman S. Theoretical analysis of a horizontal condenser-evaporator tube. International Journal of Heat and Mass Transfer, 1976, 19(3): 259–270
Pugsley A. The large-scale crumpling of thin cylindrical columns. Quarterly Journal of Mechanics and Applied Mathematics, 1960, 13(1): 1–9
Wierzbicki T, Bhat S U, Abramowicz W, et al. Alexander revisited—A two folding elements model of progressive crushing of tubes. International Journal of Solids and Structures, 1992, 29 (24): 3269–3288
Singace A A, Elsobky H, Reddy T Y. On the eccentricity factor in the progressive crushing of tubes. International Journal of Solids and Structures, 1995, 32(24): 3589–3602
Gupta N, Gupta S. Effect of annealing, size and cut-outs on axial collapse behavior of circular tubes. International Journal of Mechanical Sciences, 1993, 35(7): 597–613
Gupta N. Some aspects of axial collapse of cylindrical thin-walled tubes. Thin-Walled Structures, 1998, 32(1–3): 111–126
Daneshi G, Hosseinipour S. Elastic-plastic theory for initial buckling load of thin-walled grooved tubes under axial compression. Journal of Materials Processing Technology, 2002, 125–126: 826–832
Daneshi G, Hosseinipour S. Grooves effect on crashworthiness characteristics of thin-walled tubes under axial compression. Materials & Design, 2002, 23(7): 611–617
Mokhtarnezhad F, Salehghaffari S, Tajdari M. Improving the crashworthiness characteristics of cylindrical tubes subjected to axial compression by cutting wide grooves from their outer surface. International Journal of Crashworthiness, 2009, 14(6): 601–611
Karagiozova D, Jones N. Dynamic effects on buckling and energy absorption of cylindrical shells under axial impact. Thin-Walled Structures, 2001, 39(7): 583–610
Wang B, Lu G. Mushrooming of circular tubes under dynamic axial loading. Thin-Walled Structures, 2002, 40(2): 167–182
Tabiei A, Nilakantan G. Axial crushing of tubes as an energy dissipating mechanism for the reduction of acceleration induced injuries from mine blasts underneath infantry vehicles. International Journal of Impact Engineering, 2009, 36(5): 729–736
Huang M, Tai Y, Hu H. Dynamic crushing characteristics of high strength steel cylinders with elliptical geometric discontinuities. Theoretical and Applied Fracture Mechanics, 2010, 54(1): 44–53
Isaac C W, Oluwole O. Energy absorption improvement of circular tubes with externally press-fitted ring around tube surface subjected under axial and oblique impact loading. Thin-Walled Structures, 2016, 109: 352–366
Vinayagar K, Kumar A S. Crashworthiness analysis of double section bi-tubular thin-walled structures. Thin-Walled Structures, 2017, 112: 184–193
Chen D, Ozaki S. Numerical study of axially crushed cylindrical tubes with corrugated surface. Thin-Walled Structures, 2009, 47(11): 1387–1396
Eyvazian A, Habibi M K, Hamouda A M, et al. Axial crushing behavior and energy absorption efficiency of corrugated tubes. Materials & Design (1980-2015), 2014, 54: 1028–1038
Salehghaffari S, Tajdari M, Panahi M, et al. Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading. Thin-Walled Structures, 2010, 48(6): 379–390
Nia A A, Khodabakhsh H. The effect of radial distance of concentric thin-walled tubes on their energy absorption capability under axial dynamic and quasi-static loading. Thin-Walled Structures, 2015, 93: 188–197
Ghamarian A, Abadi M T. Axial crushing analysis of end-capped circular tubes. Thin-Walled Structures, 2011, 49(6): 743–752
Kumar A P, Mohamed M N, Jusuf A, et al. Axial crash performance of press formed open and end-capped cylindrical tubes—A comparative analysis. Thin-Walled Structures, 2018, 124: 468–488
Airoldi A, Janszen G. A design solution for a crashworthy landing gear with a new triggering mechanism for the plastic collapse of metallic tubes. Aerospace Science and Technology, 2005, 9(5): 445–455
Zhang X, Tian Q, Yu T. Axial crushing of circular tubes with buckling initiators. Thin-Walled Structures, 2009, 47(6–7): 788–797
Liu Y, Day M L. Bending collapse of thin-walled circular tubes and computational application. Thin-Walled Structures, 2008, 46(4): 442–450
Zhan Z, Hu W, Meng Q, et al. Continuum damage mechanics-based approach to the fatigue life prediction for 7050-T7451 aluminium alloy with impact pit. International Journal of Damage Mechanics, 2016, 25(7): 943–966
Galib D A, Limam A. Experimental and numerical investigation of static and dynamic axial crushing of circular aluminium tubes. Thin-Walled Structures, 2004, 42(8): 1103–1137
Yamashita M, Kenmotsu H, Hattori T. Dynamic axial compression of aluminium hollow tubes with hat cross-section and buckling initiator using inertia force during impact. Thin-Walled Structures, 2012, 50(1): 37–44
Lu G, Ong L, Wang B, et al. An experimental study on tearing energy in splitting square metal tubes. International Journal of Mechanical Sciences, 1994, 36(12): 1087–1097
Huang X, Lu G, Yu T X. Energy absorption in splitting square metal tubes. Thin-Walled Structures, 2002, 40(2): 153–165
Han D, Park S. Collapse behavior of square thin-walled columns subjected to oblique loads. Thin-Walled Structures, 1999, 35(3): 167–184
DiPaolo B, Monteiro P, Gronsky R. Quasi-static axial crush response of a thin-wall, stainless steel box component. International Journal of Solids and Structures, 2004, 41(14): 3707–3733
Xu F, Sun G, Li G, et al. Experimental study on crashworthiness of tailor-welded blank (TWB) thin walled high-strength steel (HSS) tubular structures. Thin-Walled Structures, 2014, 74: 12–27
Otubushin A. Detailed validation of a non-linear finite element code using dynamic axial crushing of a square tube. International Journal of Impact Engineering, 1998, 21(5): 349–368
Rusinek A, Zaera R, Forquin P, et al. Effect of plastic deformation and boundary conditions combined with elastic wave propagation on the collapse site of a crash box. Thin-Walled Structures, 2008, 46(10): 1143–1163
Gümrük R, Karadeniz S. A numerical study of the influence of bump type triggers on the axial crushing of top hat thin-walled sections. Thin-Walled Structures, 2008, 46(10): 1094–1106
Zhang X, Huh H. Energy absorption of longitudinally grooved square tubes under axial compression. Thin-Walled Structures, 2009, 47(12): 1469–1477
Langseth M, Hopperstad O. Static and dynamic axial crushing of square thin-walled aluminium extrusions. International Journal of Impact Engineering, 1996, 18(7–8): 949–968
Langseth M, Hopperstad O, Berstad T. Crashworthiness of aluminium extrusions: Validation of numerical simulation, effect of mass ratio and impact velocity. International Journal of Impact Engineering, 1999, 22(9–10): 829–854
Jensen Ø, Langseth M, Hopperstad O. Experimental investigations on the behavior of short to long square aluminium tubes subjected to axial loading. International Journal of Impact Engineering, 2004, 30(8–9): 973–1003
Stronge W, Yu T, Johnson W. Long stroke energy dissipation in splitting tubes. International Journal of Mechanical Sciences, 1983, 25(9–10): 637–647
Reyes A, Langseth M, Hopperstad O S. Square aluminium tubes subjected to oblique loading. International Journal of Impact Engineering, 2003, 28(10): 1077–1106
Nia A A, Fallah Nejad K, Badnava H, et al. Effects of buckling initiators on mechanical behavior of thin-walled square tubes subjected to oblique loading. Thin-Walled Structures, 2012, 59: 87–96
Zhang X, Cheng G, You Z, et al. Energy absorption of axially compressed thin-walled square tubes with patterns. Thin-Walled Structures, 2007, 45(9): 737–746
Arnold B, Altenhof W. Experimental observations on the crush characteristics of AA6061 T4 and T6 structural square tubes with and without circular discontinuities. International Journal of Crashworthiness, 2004, 9(1): 73–87
Cheng Q, Altenhof W, Li L. Experimental investigations on the crush behavior of AA6061-T6 aluminium square tubes with different types of through-hole discontinuities. Thin-Walled Structures, 2006, 44(4): 441–454
Zhang X, Zhang H. Crush resistance of square tubes with various thickness configurations. International Journal of Mechanical Sciences, 2016, 107: 58–68
Fyllingen Ø, Hopperstad O, Langseth M. Stochastic simulations of square aluminium tubes subjected to axial loading. International Journal of Impact Engineering, 2007, 34(10): 1619–1636
Mamalis A, Johnson W. The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression. International Journal of Mechanical Sciences, 1983, 25(9–10): 713–732
Mamalis A, Manolakos D, Saigal S, et al. Extensible plastic collapse of thin-wall frusta as energy absorbers. International Journal of Mechanical Sciences, 1986, 28(4): 219–229
Reid S, Reddy T. Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section. International Journal of Mechanical Sciences, 1986, 28(9): 623–637
Nagel G, Thambiratnam D. Computer simulation and energy absorption of tapered thin-walled rectangular tubes. Thin-Walled Structures, 2005, 43(8): 1225–1242
El-Sobky H, Singace A, Petsios M. Mode of collapse and energy absorption characteristics of constrained frusta under axial impact loading. International Journal of Mechanical Sciences, 2001, 43(3): 743–757
Alghamdi A, Aljawi A, Abu-Mansour T N. Modes of axial collapse of unconstrained capped frusta. International Journal of Mechanical Sciences, 2002, 44(6): 1145–1161
Alghamdi A. Folding-crumpling of thin-walled aluminium frusta. International Journal of Crashworthiness, 2002, 7(1): 67–78
Gupta N, Prasad G E, Gupta S. Plastic collapse of metallic conical frusta of large semi-apical angles. International Journal of Crashworthiness, 1997, 2(4): 349–366
Prasad G E, Gupta N. An experimental study of deformation modes of domes and large-angled frusta at different rates of compression. International Journal of Impact Engineering, 2005, 32(1–4): 400–415
Niknejad A, Tavassolimanesh A. Axial compression of the empty capped-end frusta during the inversion progress. Materials & Design, 2013, 49: 65–75
Chahardoli S, Nia A A. Experimental and numerical investigations on collapse properties of capped-end frusta tubes with circular triggers under axial quasi-static loading. International Journal of Mechanical Sciences, 2017, 134: 545–561
Mamalis A, Johnson W, Viegelahn G. The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: Some experimental results. International Journal of Mechanical Sciences, 1984, 26(11–12): 537–547
Nagel G, Thambiratnam D. A numerical study on the impact response and energy absorption of tapered thin-walled tubes. International Journal of Mechanical Sciences, 2004, 46(2): 201–216
Nagel G, Thambiratnam D. Dynamic simulation and energy absorption of tapered tubes under impact loading. International Journal of Crashworthiness, 2004, 9(4): 389–399
Nagel G M, Thambiratnam D P. Dynamic simulation and energy absorption of tapered thin-walled tubes under oblique impact loading. International Journal of Impact Engineering, 2006, 32(10): 1595–1620
Taştan A, Acar E, Güler M, et al. Optimum crashworthiness design of tapered thin-walled tubes with lateral circular cutouts. Thin-Walled Structures, 2016, 107: 543–553
Mamalis A, Robinson M, Manolakos D, et al. Crashworthy capability of composite material structures. Composite Structures, 1997, 37(2): 109–134
Shin K C, Lee J J, Kim K H, et al. Axial crush and bending collapse of an aluminium/GFRP hybrid square tube and its energy absorption capability. Composite Structures, 2002, 57(1–4): 279–287
Ramakrishna S, Hull D. Energy absorption capability of epoxy composite tubes with knitted carbon fibre fabric reinforcement. Composites Science and Technology, 1993, 49(4): 349–356
Solaimurugan S, Velmurugan R. Influence of fibre orientation and stacking sequence on petalling of glass/polyester composite cylindrical shells under axial compression. International Journal of Solids and Structures, 2007, 44(21): 6999–7020
Kim J S, Yoon H J, Shin K B. A study on crushing behaviors of composite circular tubes with different reinforcing fibers. International Journal of Impact Engineering, 2011, 38(4): 198–207
Hamada H, Ramakrishna S, Satoh H. Crushing mechanism of carbon fibre/PEEK composite tubes. Composites, 1995, 26(11): 749–755
Song H W, Wan Z M, Xie Z M, et al. Axial impact behavior and energy absorption efficiency of composite wrapped metal tubes. International Journal of Impact Engineering, 2000, 24(4): 385–401
Mirzaei M, Shakeri M, Sadighi M, et al. Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load. Composite Structures, 2012, 94(6): 1959–1966
Mahdi E, Sultan H, Hamouda A, et al. Experimental optimization of composite collapsible tubular energy absorber device. Thin-Walled Structures, 2006, 44(11): 1201–1211
Thuis H, Metz V. The influence of trigger configurations and laminate lay-up on the failure mode of composite crush cylinders. Composite Structures, 1994, 28(2): 131–137
Siromani D, Henderson G, Mikita D, et al. An experimental study on the effect of failure trigger mechanisms on the energy absorption capability of CFRP tubes under axial compression. Composites. Part A, Applied Science and Manufacturing, 2014, 64: 25–35
Huang J, Wang X. Numerical and experimental investigations on the axial crushing response of composite tubes. Composite Structures, 2009, 91(2): 222–228
Chiu L N, Falzon B G, Ruan D, et al. Crush responses of composite cylinder under quasi-static and dynamic loading. Composite Structures, 2015, 131: 90–98
Mahdi E, Mokhtar A, Asari N, et al. Nonlinear finite element analysis of axially crushed cotton fibre composite corrugated tubes. Composite Structures, 2006, 75(1–4): 39–48
Abdewi E F, Sulaiman S, Hamouda A, et al. Effect of geometry on the crushing behavior of laminated corrugated composite tubes. Journal of Materials Processing Technology, 2006, 172(3): 394–399
Abdewi E F, Sulaiman S, Hamouda A, et al. Quasi-static axial and lateral crushing of radial corrugated composite tubes. Thin-Walled Structures, 2008, 46(3): 320–332
Mamalis A, Manolakos D, Demosthenous G, et al. The static and dynamic axial crumbling of thin-walled fibreglass composite square tubes. Composites. Part B, Engineering, 1997, 28(4): 439–451
Mamalis A G, Manolakos D, Ioannidis M, et al. Crashworthy characteristics of axially statically compressed thin-walled square CFRP composite tubes: Experimental. Composite Structures, 2004, 63(3–4): 347–360
Mamalis A, Manolakos D, Ioannidis M, et al. On the experimental investigation of crash energy absorption in laminate splaying collapse mode of FRP tubular components. Composite Structures, 2005, 70(4): 413–429
Mamalis A, Manolakos D, Ioannidis M, et al. The static and dynamic axial collapse of CFRP square tubes: Finite element modelling. Composite Structures, 2006, 74(2): 213–225
Zarei H, Kröger M, Albertsen H. An experimental and numerical crashworthiness investigation of thermoplastic composite crash boxes. Composite Structures, 2008, 85(3): 245–257
Bambach M R, Elchalakani M, Zhao X L. Composite steel-CFRP SHS tubes under axial impact. Composite Structures, 2009, 87(3): 282–292
Bambach M R, Jama H H, Elchalakani M. Static and dynamic axial crushing of spot-welded thin-walled composite steel-CFRP square tubes. International Journal of Impact Engineering, 2009, 36(9): 1083–1094
Bambach M R, Elchalakani M. Plastic mechanism analysis of steel SHS strengthened with CFRP under large axial deformation. Thin-Walled Structures, 2007, 45(2): 159–170
Bambach M. Axial capacity and crushing behavior of metal-fiber square tubes-Steel, stainless steel and aluminium with CFRP. Composites. Part B, Engineering, 2010, 41(7): 550–559
Bambach M. Axial capacity and crushing of thin-walled metal, fibre-epoxy and composite metal-fibre tubes. Thin-Walled Structures, 2010, 48(6): 440–452
Zheng Z, Liu Y, Yu J, et al. Dynamic crushing of cellular materials: Continuum-based wave models for the transitional and shock modes. International Journal of Impact Engineering, 2012, 42: 66–79
Zheng Z, Yu J, Wang C, et al. Dynamic crushing of cellular materials: A unified framework of plastic shock wave models. International Journal of Impact Engineering, 2013, 53: 29–43
Liu Y, Schaedler T A, Chen X. Dynamic energy absorption characteristics of hollow microlattice structures. Mechanics of Materials, 2014, 77: 1–13
Reid S, Reddy T, Gray M. Static and dynamic axial crushing of foam-filled sheet metal tubes. International Journal of Mechanical Sciences, 1986, 28(5): 295–322
Reid S, Reddy T. Axial crushing of foam-filled tapered sheet metal tubes. International Journal of Mechanical Sciences, 1986, 28(10): 643–656
Reddy T, Wall R. Axial compression of foam-filled thin-walled circular tubes. International Journal of Impact Engineering, 1988, 7(2): 151–166
Seitzberger M, Rammerstorfer F G, Gradinger R, et al. Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam. International Journal of Solids and Structures, 2000, 37(30): 4125–4147
Güden M, Kavi H. Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and aluminium foam-filled aluminium multi-tubes. Thin-Walled Structures, 2006, 44(7): 739–750
Abramowicz W, Wierzbicki T. Axial crushing of foam-filled columns. International Journal of Mechanical Sciences, 1988, 30 (3–4): 263–271
Seitzberger M, Rammerstorfer F G, Degischer H P, et al. Crushing of axially compressed steel tubes filled with aluminium foam. Acta Mechanica, 1997, 125(1–4): 93–105
Guillow S, Lu G, Grzebieta R. Quasi-static axial compression of thin-walled circular aluminium tubes. International Journal of Mechanical Sciences, 2001, 43(9): 2103–2123
Hanssen A, Langseth M, Hopperstad O. Static crushing of square aluminium extrusions with aluminium foam filler. International Journal of Mechanical Sciences, 1999, 41(8): 967–993
Hanssen A G, Langseth M, Hopperstad O S. Static and dynamic crushing of square aluminium extrusions with aluminium foam filler. International Journal of Impact Engineering, 2000, 24(4): 347–383
Santosa S P, Wierzbicki T, Hanssen A G, et al. Experimental and numerical studies of foam-filled sections. International Journal of Impact Engineering, 2000, 24(5): 509–534
Kavi H, Toksoy A K, Guden M. Predicting energy absorption in a foam-filled thin-walled aluminium tube based on experimentally determined strengthening coefficient. Materials & Design, 2006, 27(4): 263–269
Mirfendereski L, Salimi M, Ziaei-Rad S. Parametric study and numerical analysis of empty and foam filled thin-walled tubes under static and dynamic loadings. International Journal of Mechanical Sciences, 2008, 50(6): 1042–1057
Ahmad Z, Thambiratnam D, Tan A. Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. International Journal of Impact Engineering, 2010, 37(5): 475–488
Meguid S, Attia M, Monfort A. On the crush behavior of ultralight foam-filled structures. Materials & Design, 2004, 25(3): 183–189
Santosa S, Wierzbicki T. Crash behavior of box columns filled with aluminium honeycomb or foam. Computers & Structures, 1998, 68(4): 343–367
Zhang Z, Liu S, Tang Z. Comparisons of honeycomb sandwich and foam-filled cylindrical columns under axial crushing loads. Thin-Walled Structures, 2011, 49(9): 1071–1079
Yin H, Wen G, Hou S, et al. Crushing analysis and multiobjective crash/worthiness optimization of honeycomb-filled single and bitubular polygonal tubes. Materials & Design, 2011, 32(8–9): 4449–4460
Hussein R D, Ruan D, Lu G, et al. Crushing response of square aluminium tubes filled with polyurethane foam and aluminium honeycomb. Thin-Walled Structures, 2017, 110: 140–154
Mamalis A, Manolakos D, Ioannidis M, et al. Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section. Thin-Walled Structures, 2003, 41(10): 891–900
Rossi A, Fawaz Z, Behdinan K. Numerical simulation of the axial collapse of thin-walled polygonal section tubes. Thin-Walled Structures, 2005, 43(10): 1646–1661
Zhang X, Huh H. Crushing analysis of polygonal columns and angle elements. International Journal of Impact Engineering, 2010, 37(4): 441–451
Zhang X, Cheng G, Zhang H. Theoretical prediction and numerical simulation of multi-cell square thin-walled structures. Thin-Walled Structures, 2006, 44(11): 1185–1191
Tran T, Hou S, Han X, et al. Theoretical prediction and crashworthiness optimization of multi-cell square tubes under oblique impact loading. International Journal of Mechanical Sciences, 2014, 89: 177–193
Tran T, Hou S, Han X, et al. Theoretical prediction and crashworthiness optimization of multi-cell triangular tubes. Thin-Walled Structures, 2014, 82: 183–195
Zheng G, Pang T, Sun G, et al. Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness. International Journal of Mechanical Sciences, 2016, 118: 283–297
Zhang X, Zhang H. Energy absorption of multi-cell stub columns under axial compression. Thin-Walled Structures, 2013, 68: 156–163
Tang Z, Liu S, Zhang Z. Analysis of energy absorption characteristics of cylindrical multi-cell columns. Thin-Walled Structures, 2013, 62: 75–84
Yin H, Wen G, Liu Z, et al. Crashworthiness optimization design for foam-filled multi-cell thin walled structures. Thin-Walled Structures, 2014, 75: 8–17
Hong W, Fan H, Xia Z, et al. Axial crushing behaviors of multi-cell tubes with triangular lattices. International Journal of Impact Engineering, 2014, 63: 106–117
Tabacu S. Analysis of circular tubes with rectangular multi-cell insert under oblique impact loads. Thin-Walled Structures, 2016, 106:129–147
Chirwa E. Theoretical analysis of tapered thin-walled metal inverbucktube. International Journal of Mechanical Sciences, 1993, 35(3–4): 325–351
Li G, Zhang Z, Sun G, et al. Comparison of functionally-graded structures under multiple loading angles. Thin-Walled Structures, 2015, 94: 334–347
Zhang X, Zhang H, Wen Z. Axial crushing of tapered circular tubes with graded thickness. International Journal of Mechanical Sciences, 2015, 92: 12–23
Li G, Xu F, Sun G, et al. A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading. International Journal of Impact Engineering, 2015, 77: 68–83
Zhang X, Wen Z, Zhang H. Axial crushing and optimal design of square tubes with graded thickness. Thin-Walled Structures, 2014, 84: 263–274
An X, Gao Y, Fang J, et al. Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets. Thin-Walled Structures, 2015, 91: 63–71
Gupta P. A study on mode of collapse of varying wall thickness metallic frusta subjected to axial compression. Thin-Walled Structures, 2008, 46(5): 561–571
Zhang X, Zhang H. Relative merits of conical tubes with graded thickness subjected to oblique impact loads. International Journal of Mechanical Sciences, 2015, 98: 111–125
Zhang H, Zhang X. Crashworthiness performance of conical tubes with nonlinear thickness distribution. Thin-Walled Structures, 2016, 99: 35–44
Fang J, Gao Y, Sun G, et al. Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness. International Journal of Mechanical Sciences, 2015, 103: 63–73
Sun G, Xu F, Li G, et al. Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness. International Journal of Impact Engineering, 2014, 64: 62–74
Haghi Kashani M, Shahsavari Alavijeh H, Akbarshahi H, et al. Bitubular square tubes with different arrangements under quasistatic axial compression loading. Materials & Design, 2013, 51: 1095–1103
Sharifi S, Shakeri M, Fakhari H E, et al. Experimental investigation of bitubal circular energy absorbers under quasi-static axial load. Thin-Walled Structures, 2015, 89: 42–53
Goel M D. Deformation, energy absorption and crushing behavior of single-, double- and multi-wall foam filled square and circular tubes. Thin-Walled Structures, 2015, 90: 1–11
Azimi M B, Asgari M. A new bi-tubular conical-circular structure for improving crushing behavior under axial and oblique impacts. International Journal of Mechanical Sciences, 2016, 105: 253–265
Nia A A, Chahardoli S. Mechanical behavior of nested multi-tubular structures under quasi-static axial load. Thin-Walled Structures, 2016, 106: 376–389
Estrada Q, Szwedowicz D, Rodriguez-Mendez A, et al. Effect of radial clearance and holes as crush initiators on the crashworthiness performance of bi-tubular profiles. Thin-Walled Structures, 2019, 140: 43–59
Sun F, Lai C, Fan H, et al. Crushing mechanism of hierarchical lattice structure. Mechanics of Materials, 2016, 97: 164–183
Sun F, Lai C, Fan H. In-plane compression behavior and energy absorption of hierarchical triangular lattice structures. Materials & Design, 2016, 100: 280–290
Luo Y, Fan H. Energy absorbing ability of rectangular self-similar multi-cell sandwich-walled tubular structures. Thin-Walled Structures, 2018, 124: 88–97
Li W, Luo Y, Li M, et al. A more weight-efficient hierarchical hexagonal multi-cell tubular absorber. International Journal of Mechanical Sciences, 2018, 140: 241–249
Fan H, Luo Y, Yang F, et al. Approaching perfect energy absorption through structural hierarchy. International Journal of Engineering Science, 2018, 130: 12–32
Chen Y, Qiao C, Qiu X, et al. A novel self-locked energy absorbing system. Journal of the Mechanics and Physics of Solids, 2016, 87: 130–149
Yang K, Qin Q, Zhai Z, et al. Dynamic response of self-locked energy absorption system under impact loadings. International Journal of Impact Engineering, 2018, 122: 209–227
Yang K, Chen Y, Zhang L, et al. Shape and geometry design for self-locked energy absorption systems. International Journal of Mechanical Sciences, 2019, 156: 312–328
Baroutaji A, Gilchrist M, Olabi A G J T W S. Quasi-static, impact and energy absorption of internally nested tubes subjected to lateral loading. Thin-Walled Structures, 2016, 98: 337–350
Olabi A G, Morris E, Hashmi M, et al. Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 2008, 35(1): 10–26
Olabi A G, Morris E, Hashmi M, et al. Optimised design of nested circular tube energy absorbers under lateral impact loading. International Journal of Mechanical Sciences, 2008, 50(1): 104–116
Wang H, Yang J, Liu H, et al. Internally nested circular tube system subjected to lateral impact loading. Thin-Walled Structures, 2015, 91: 72–81
Tarlochan F, Ramesh S. Composite sandwich structures with nested inserts for energy absorption application. Composite Structures, 2012, 94(3): 904–916
Reddy T, Reid S. Axial splitting of circular metal tubes. International Journal of Mechanical Sciences, 1986, 28(2): 111–131
Zhang X, Yu T. Energy absorption of pressurized thin-walled circular tubes under axial crushing. International Journal of Mechanical Sciences, 2009, 51(5): 335–349
Chen W, Wierzbicki T. Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption. Thin-Walled Structures, 2001, 39(4): 287–306
Ahmad Z, Thambiratnam D. Crushing response of foam-filled conical tubes under quasi-static axial loading. Materials & Design, 2009, 30(7): 2393–2403
Alavi Nia A, Haddad Hamedani J. Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries. Thin-Walled Structures, 2010, 48(12): 946–954
Zhang X, Cheng G. A comparative study of energy absorption characteristics of foam-filled and multicell square columns. International Journal of Impact Engineering, 2007, 34(11): 1739–1752
Acknowledgements
This study was partially supported by SERB/DST under project number DST/SERB ECR/2016/001440 for providing resources. We thank our colleagues from Visvesvaraya National Institute of Technology, India who provided insight and expertise that greatly assisted the research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Patel, V., Tiwari, G. & Dumpala, R. Review of the crushing response of collapsible tubular structures. Front. Mech. Eng. 15, 438–474 (2020). https://doi.org/10.1007/s11465-019-0579-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-019-0579-1