Abstract
In this paper, we design an optimal control system for a quadrotor to carry a cable-suspended load flying through a window. As the window is narrower than the length of the cable, it is very challenging to design a practical control system to pass through it. Our solution includes a system identification component, a trajectory generation component, and a trajectory tracking control component. The exact dynamic model that usually derived from the first principles is assumed to be unavailable. Instead, a model identification approach is adopted, which relies on a simple but effective low order equivalent system (LOES) to describe the core dynamical characteristics of the system. After being excited by some specifically designed manoeuvres, the unknown parameters in the LOES are obtained by using a frequency based least square estimation algorithm. Based on the estimated LOES, a numerical optimization algorithm is then utilized for aggressive trajectory generation when relevant constraints are given. The generated trajectory can lead to the quadrotor and load system passing through a narrow window with a cascade PD trajectory tracking controller. Finally, a practical flight test based on an Astec Hummingbird quadrotor is demonstrated and the result validates the proposed approach.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Mathew, N., Smith, S.L., Waslander, S.L.: Planning paths for package delivery in heterogeneous multirobot teams. IEEE Trans. Autom. Sci. Eng. 12(4), 1298–1308 (2015)
Zhan, P., Yu, K., Swindlehurst, A.L.: Wireless relay communications with unmanned aerial vehicles: Performance and optimization. IEEE Trans. Aerosp. Electron. Syst. 47(3), 2068–2085 (2011)
DeBusk, W.M.: Unmanned aerial vehicle systems for disaster relief: Tornado alley. In: Infotech@ Aerospace Conferences (2010)
Zhang, C., Hu, H., Gu, D., Wang, J.: Cascaded control for balancing an inverted pendulum on a flying quadrotor. Robotica 35(6), 1263–1279 (2017)
Lindsey, Q., Mellinger, D., Kumar, V.: Construction of Cubic Structures with Quadrotor Teams. In: Proc. Robotics: Science & Systems VII (2011)
Thomas, J, Polin, J, Sreenath, K, Kumar, V: Avian-inspired grasping for quadrotor micro UAVs. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, pp. V06AT07A014–V06AT07A014 (2013)
Ritz, R., D’Andrea, R.: Carrying a flexible payload with multiple flying vehicles. In: 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 3465–3471. IEEE (2013)
Tang, S., Sreenath, K., Kumar, V.: Aggressive maneuvering of a quadrotor with a cable-suspended payload. In: Robotics: Science and Systems, Workshop on Women in Robotics. Citeseer (2014)
Cruz, P., Fierro, R.: Autonomous lift of a cable-suspended load by an unmanned aerial robot. In: 2014 IEEE Conference on Control Applications (CCA). pp. 802–807. IEEE (2014)
Alothman, Y., Jasim, W., Gu, D.: Quad-rotor lifting-transporting cable-suspended payloads control. In: 2015 21st International Conference on Automation and Computing (ICAC), pp. 1–6. IEEE (2015)
Dai, S., Lee, T., Bernstein, D.S.: Adaptive control of a quadrotor UAV transporting a cable-suspended load with unknown mass. In: 2014 IEEE 53rd Annual Conference on Decision and Control (CDC), pp. 6149–6154. IEEE (2014)
Faust, A., Palunko, I., Cruz, P., Fierro, R., Tapia, L.: Learning swing-free trajectories for UAVs with a suspended load. In: 2013 IEEE International Conference on Robotics and Automation (ICRA), pp. 4902–4909. IEEE (2013)
Palunko, I., Fierro, R., Cruz, P.: Trajectory generation for swing-free maneuvers of a quadrotor with suspended payload: A dynamic programming approach. In: 2012 IEEE International Conference on Robotics and Automation (ICRA), pp. 2691–2697. IEEE (2012)
Sreenath, K., Lee, T., Kumar, V.: Geometric control and differential flatness of a quadrotor UAV with a cable-suspended load. In: 2013 IEEE 52nd Annual Conference on Decision and Control (CDC), pp. 2269–2274. IEEE (2013)
Sreenath, K., Kumar, V.: Dynamics, control and planning for cooperative manipulation of payloads suspended by cables from multiple quadrotor robots. rn 1(r2), r3 (2013)
De Crousaz, C., Farshidian, F., Buchli, J.: Aggressive optimal control for agile flight with a slung load. In: IROS 2014 Workshop on Machine Learning in Planning and Control of Robot Motion Citeseer (2014)
Tang, S., Kumar, V.: Mixed integer quadratic program trajectory generation for a quadrotor with a cable-suspended payload. In: 2015 IEEE International Conference on Robotics and Automation (ICRA), pp. 2216–2222. IEEE (2015)
Klein, V., Morelli, E.A.: Aircraft system identification: theory and practice. American Institute of Aeronautics and Astronautics Reston, Va USA (2006)
Tischler, M.B., Remple, R.K.: Aircraft and rotorcraft system identification. AIAA education series (2006)
Hoffer, N.V., Coopmans, C., Jensen, A.M., Chen, Y.: A survey and categorization of small low-cost unmanned aerial vehicle system identification. J. Intell. Robot. Syst. 74(1-2), 129 (2014)
Park, S.: Modeling with vortex lattice method and frequency sweep flight test for a fixed-wing UAV. Control. Eng. Pract. 21(12), 1767–1775 (2013)
Dorobantu, A., Murch, A., Mettler, B., Balas, G.: System identification for small, low-cost, fixed-wing unmanned aircraft. J. Aircr. 50(4), 1117–1130 (2013)
Ghosh, A., Raisinghani, S.: Frequency-domain estimation of parameters from flight data using neural networks. J. Guid. Control. Dyn. 24(3), 525–530 (2001)
Shamsudin, S.S., Chen, X.: Identification of an unmanned helicopter system using optimised neural network structure. Int. J. Model. Identif. Control. 17(3), 223–241 (2012)
Puttige, V.R., Anavatti, S.G.: Real-time system identification of unmanned aerial vehicles: a multi-network approach. JCP 3(7), 31–38 (2008)
Chen, S., Billings, S.: Neural networks for nonlinear dynamic system modelling and identification. Int. J. Control. 56(2), 319–346 (1992)
Theodore, C.R., Tischler, M.B., Colbourne, J.D.: Rapid frequency-domain modeling methods for unmanned aerial vehicle flight control applications. J. Aircr. 41(4), 735–743 (2004)
Gremillion, G., Humbert, J.: System identification of a quadrotor micro air vehicle. In: AIAA Atmospheric Flight Mechanics Conference, pp. 7644 (2010)
Holzel, M.S., Morelli, E.A.: Real-time frequency response estimation from flight data. J. Guid. Control. Dyn. 35(5), 1406–1417 (2012)
Grauer, J., Morelli, E.: Method for real-time frequency response and uncertainty estimation. J. Guid. Control. Dyn. 37(1), 336–344 (2013)
Morelli, E.A., Smith, M.S.: Real-time dynamic modeling: data information requirements and flight-test results. J. Aircr. 46(6), 1894–1905 (2009)
Morelli, E.A.: Real-time parameter estimation in the frequency domain. J. Guid. Control. Dyn. 23(5), 812–818 (2000)
Hehn, M., D’Andrea, R.: Quadrocopter trajectory generation and control. IFAC Proceedings Volumes 44 (1), 1485–1491 (2011)
Hehn, M., Ritz, R., D’Andrea, R.: Performance benchmarking of quadrotor systems using time-optimal control. Auton. Robot. 33(1-2), 69–88 (2012)
Tomić, T., Maier, M., Haddadin, S.: Learning quadrotor maneuvers from optimal control and generalizing in real-time. In: 2014 IEEE International Conference on Robotics and Automation (ICRA), pp 1747–1754, IEEE (2014)
Guo, M., Su, Y., Gu, D.: System identification of the quadrotor with inner loop stabilisation system. Int. J. Model. Identif. Control. 28(3), 245–255 (2017)
Ascending technologies. [Online]. Available: http://www.asctec.de
Kelly, M.P.: Transcription methods for trajectory optimization (2015)
Mellinger, D., Kumar, V.: Minimum snap trajectory generation and control for quadrotors. In: 2011 IEEE International Conference on Robotics and Automation (ICRA), pp. 2520–2525, IEEE (2011)
Kelly, M.P.: An introduction to trajectory optimization: How to do your own direct collocation. SIAM Review, pp. 2520–2525 (2016)
Acknowledgments
The authors would like to thank Yaser Alothman, Robin Dowling and Ian Dukes at the University of Essex for their technical support and M. P. Kelly from Cornell University for sharing his Matlab library of OptimTraj.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
(MP4 12.7 MB)
Rights and permissions
About this article
Cite this article
Guo, M., Gu, D., Zha, W. et al. Controlling a Quadrotor Carrying a Cable-Suspended Load to Pass Through a Window. J Intell Robot Syst 98, 387–401 (2020). https://doi.org/10.1007/s10846-019-01038-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10846-019-01038-6