An approach to solving spatial problems of the stress–strain state and stability of layered anisotropic cylindrical shells is developed. The anisotropy is characterized by one plane of elastic symmetry. The numerical implementation of the approach is based on the combination of the Bubnov–Galerkin, discrete Fourier transform, and discrete-orthgonalization methods. The results obtained are in good agreement with the solutions of simpler problems. A new stability problem for a sandwich shell is solved.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. A. Ambartsumyan, General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).
V. A. Bazhenov, M. P. Semenyuk, and V. M. Trach, Nonlinear Deformation, Stability, and Postcritical Behavior of Anisotropic Shells [in Ukrainian], Karavela, Kyiv (2010).
G. A. Vanin and N. P. Semenyuk, Stability of Composite Shells with Imperfections [in Russian], Naukova Dumka, Kyiv (1987).
A. S. Vol’mir, Stability of Deformable Systems [in Russian], Nauka, Moscow (1967).
Ya. M. Grigorenko, A,. T. Vasilenko, and N. D. Pankratova, Problems of the Elasticity Theory of Inhomogeneous Bodies [in Russian], Naukova Dumka, Kyiv (1991).
Ya. M. Grigorenko, G. G. Vlaikov, and A. Ya. Grigorenko, Numerical-Analytical Solution of Problems of Shell Mechanics Based on Various Models [in Russian], Akademperiodika, Kyiv (2006).
Ya. M. Grigorenko and N. N. Kryukov, Numerical Solutions of Static Problems for Layered Shells with Variable Parameters [in Russian], Naukova Dumka, Kyiv (1988).
A. N. Guz, Fundamentals of the Spatial Theory of Stability of Deformable Bodies [in Russian], Vyshcha Shkola, Kyiv (1986).
A. N. Guz and I. Yu. Babich, Three-Dimensional Theory of Stability of Deformable Bodies, Vol. 4 of the five-volume series Spatial Problems of Elasticity and Plasticity Theory [in Russian], Naukova Dumka, Kyiv (1985).
A. V. Karmishin, V. A. Lyaskovets, and V. I. Myachenkov, Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1975).
V. I. Korolev, Layered Anisotropic Plates and Shells Made of Reinforced Plastics [in Russian], Mashinostroenie, Moscow (1965).
V. P. Kostromin and V. I. Myachenkov, “Stability of multilayered shells with cylindrical anisotropic inhomogeneous layers,” Sopr. Mater. Teor. Sooruzh., 21, 11–16 (1973).
S. G. Lekhnitskii, Theory of Anisotropic Elasticity [in Russian], Nauka, Moscow (1977).
V. D. Kubenko, A. E. Babaev, E. I. Bespalova, et al., Dynamics of Structural Members [in Russian], Vol. 9 of the twelve-volume series Composite Mechanics, A.S.K, Kyiv (1999).
V. V. Novozhilov, Fundamentals of the Nonlinear Elasticity Theory [in Russian], OGIZ, Leningrad–Moscow (1948).
Ya. M. Grigorenko and N. N. Kryukov, “Solution of boundary-value problems of the theory of plates with variable parameters using periodical B-splines,” Int. Appl. Mech., 54, No. 4, 373–377 (2018).
Ya. M. Grigorenko and L. S. Rozhok, “Layered inhomogeneous hollow cylinders with concave corrugations under internal pressure,” Int. Appl. Mech., 54, No. 5, 531–538 (2018).
G. A. Kardomateas, “Bifurcation of equilibrium in thick orthotropic cylindrical shells under axial compression,” J. Appl. Mech., 62, No. 1, 43–52 (1995).
A. V. Podvornyi, N. P. Semenyuk, and V. M. Trach, “Stability of inhomogeneous cylindrical shells under distributed external pressure in a three-dimensional statement,” Int. Appl. Mech., 53, No. 6, 623–638 (2017).
N. P. Semenyuk and V. M. Trach, “Allowing for rotations about the normal in nonlinear theories of shells,” Int. Appl. Mech., 40, No. 6, 694–701 (2004).
M. P. Semenyuk, V. M. Trach, and A. V. Podvornyi, “Stability of cylindrical anisotropic shells under axial pressure in three-dimensional statement,” Sopr. Mater. Teor. Sooruzh., No. 94, 126–138 (2015).
V. M. Trach, “Stability of cylindrical shells with one plane of elastic symmetry under axial compression and torsion,” Int. Appl. Mech., 42, No. 8, 943–947 (2006).
W. Tracz and M. Choruzyi, “Statecznose osiowo sciskanych cylinddrycznych anizotropowych powlok o sredniej grubosci,” Acta Scientiarum Polonorum. Architektura, 14, No. 3, 21–34 (2015).
P. Weaver, ”Imperfection-insensitive shells using variable stiffness composites,” in: Proc. 3th Conf. on Buckling and Postbuckling Behavior of Composite Laminated Shell Structures with DESICOS Workshop, March 25–26, Braunschweig, Germany (2015).
P. M. Weaver, J. R. Driesen, and P. Roberts, “Anisotropic effects in the compression buckling of laminated composite cylindrical shells,” Comp. Sci. Tech., 62, 91–105 (2002).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 55, No. 2, pp. 113–125, March–April, 2019.
Rights and permissions
About this article
Cite this article
Semenyuk, N.P., Trach, V.M. & Podvornyi, A.V. Spatial Stability of Layered Anisotropic Cylindrical Shells Under Compressive Loads. Int Appl Mech 55, 211–221 (2019). https://doi.org/10.1007/s10778-019-00951-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-019-00951-5