The stress problem for layered hollow inhomogeneous cylinders with concave semi-corrugations is solved in spatial statement, and their stress state is studied depending on the stiffness of the core layer. To solve the problem, the analytical methods of variable separation, approximation of functions by discrete Fourier series, and the numerical discrete-orthogonalization method are used. Numerical results are analyzed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. K. Godunov, “Numerical solution of boundary-value problems for systems of linear ordinary differential equations,” Usp. Mat. Nauk, 16, No. 3, 171–174 (1961).
S. K. Golushko and Yu. V. Nemirovskii, Direct and Inverse Problems of the Mechanics of Elastic Composite Plates and Shells of Revolution [in Russian], Fizmatlit, Moscow (2008).
E. I. Grigolyuk and E. A. Kogan, Statics of Layered Elastic Shells [in Russian], NII Mekh. MGU, Moscow (1999).
Ya. M. Grigorenko and L. S. Rozhok, “Analysis of the stress state of hollow cylinders with concave corrugations,” Mat. Met. Fiz.-Mekh. Polya, 58, No. 4, 70–77 (2015).
V. O. Kaledin, S. M. Akul’chenko, A. B. Mitkevich, E. V. Reshetnikova, E. A. Sedova, and Yu. V. Shpakova, Modeling of Statics and Dynamics of Shell Structures Made of Composite Materials [in Russian], Fizmatlit, Moscow (2014).
S. G. Lekhnitskii, Theory of Elasticity of Anisotropic Body [in Russian], Nauka, Moscow (1977).
S. P. Timoshenko, A Course in the Theory of Elasticity [in Russian], Naukova Dumka, Kyiv (1972).
A. De Leo, A. Contento, and A. Di Egidio, “Parametric study of the distribution of the tensile stresses in pavilion structures constituted by four sectors of barrel shells,” Meccanica, 52, No. 10, 2293–2305 (2017).
A. Z. Galishin, A. A. Zolochevskii, and S. N. Sklepus, “Feasibility of shell models for determining the stress–strain state and creep damage of cylindrical shells,” Int. Appl. Mech., 53, No. 4, 398–406 (2017).
A. Ya. Grigorenko, W. H. Muller, Ya. M. Grigorenko, and G. G. Vlaikov, Recent Developments in Anisotropic Heterogeneous Shell Theory: Applications of Refined and Three-Dimensional Theory, IIB, Springer (2016).
K. Hatanaka, S. M. V. Rao, T. Saito, and T. Mizukaki, “Numerical investigations of shock oscillations ahead of a hemispherical shell in supersonic flow,” Shock Waves, 26, No. 3, 299–310 (2016).
G. A. Korn and T. M. Korn, Mathematical Handbook for Scientists and Engineers, MG Graw-Hill, New York (1961).
H. W. Kwon, S. Y. Hong, and J. H. Song, “Vibrational energy flow analysis of coupled cylindrical thin shell structures,” J. Mech. Sci. Tech., 30, No. 6, 4049–4062 (2016).
S. Malek and Chr. Williams, The Equilibrium of Corrugated Plates and Shells, Nexus Netw.J. (2017).
A. V. Marchuk and S. V. Gnidash, “Analysis of the effect of local loads on thick-walled cylindrical shells with different boundary conditions,” Int. Appl. Mech., 52, No. 4, 368–377 (2016).
S. Ya. Sajadi, M. H. Abolbashari, and M. Hosseini, “Geometrically nonlinear dynamic analysis of functionally graded thick hollow cylinders using total Lagrangian MLPG method,” Meccanica, 51, No. 3, 655–672 (2016).
E. A. Storozhuk and A. V. Yatsura, “Exact solutions of boundary-value problems for noncircular cylindrical shells,” Int. Appl. Mech., 52, No. 4, 386–397 (2016).
L. Tokova, A. Yasinskyy, and C. C. Ma, “Effect of the layer inhomogeneity on the distribution of stresses and displacements in an elastic multilayer cylinder,” Acta Mech., 228, No. 8, 2865–2877 (2017).
G. Wrobel, M. Szymiczek, and J. Kaszmarczyk, “Influence of the structure and number of reinforcement layers on the stress state in the shells of tanks and pressure pipes,” Mech. Comp. Mat., 53, No. 2, 165–178 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 54, No. 5, pp. 47–54, September–October, 2018.
Rights and permissions
About this article
Cite this article
Grigorenko, Y.M., Rozhok, L.S. Layered Inhomogeneous Hollow Cylinders with Concave Corrugations Under Internal Pressure. Int Appl Mech 54, 531–538 (2018). https://doi.org/10.1007/s10778-018-0905-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0905-z