The stress–strain state and strength of layered hollow cylinders and layered cylindrical shells under creep conditions are determined. The solution for two-layer shells with different thicknesses ratios of layers found using the straight element hypothesis is collated with spatial solutions for axisymmetrically loaded hollow cylinders. The technique of solving the spatial initial–boundary-value problem is based on the combined application of the Ritz and R-function methods and the Runge–Kutta–Merson method for time integration with automatic time step control. The initial–boundary-value problem for shells is also solved using the Runge–Kutta–Merson method in combination with the Runge–Kutta method and Godunov’s discrete orthogonalization method for solving the boundary-value problem at every time step.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. P. Brusentsov, et al., “Studying the strength of solid oxide fuel cells of plate shape”, in: Solid Oxide Fuel Cells [in Russian], RF YaTs-VNIITF, Snezhink (2003), pp. 233–240.
A. V. Burlakon, G. I. L’vov, and O. K. Morachkovskii, Long-Term Strength of Shells [in Russian], Vyshchaya Shkola, Kharkov (1981).
A. S. Vol’mir, Nonlinear Dynamics of Plates and Shells [in Russian], Nauka, Moscow (1974).
A. Z. Galishyn and S. N. Sklepus, “Application of shell models for determination of creep and damageability of hollow cylinders,” Zb. Nauch. Prats’ Dneprodzerzhinsk. Derzh. Univ., No. 1(26), 60–70 (2015).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Variable Stiffness, Vol 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1981).
V. S. Gudramovich, Creep Theory and Its Applications for Design of Elements of Thin-Walled Structures [in Russian], Naukova Dumka, Kiev (2005).
A. A. Zolochkovskii, A. N. Sklepus, and S. N. Sklepus, Nonlinear Solid Mechanics [in Russian], Biznes Investor Grup, Kharkov (2011).
L. M. Kachanov, Fundamentals of Fracture Mechanics [in Russian], Nauka, Moscow (1974).
V. I. Krylov, V. V. Bobkov, and P. I. Monastyrniy, Numerical Methods [in Russian], Nauka, Moscow (1977).
A. M. Lokoshchenko, Creep and Long-Term Strength of Materials [in Russian], Fizmatgiz, Moscow (2015).
A. M. Lokoshchenko, N. E. Pechenina, and S. A. Shesterikov, “Life of cylindrical shells in pure bending under creep,” Prikl. Mat. Mekh., No. 12, 73–78 (1989).
Yu. N. Rabotnov, Creep of Structural Elements [in Russian], Nauka, Moscow (1966).
A. O. Rasskazov, I. I. Sokolovskaya, and N. A. Shulga, Theory and Design of Layered Orthotropic Plates and Shells [in Russian], Vyshcha Shkola, Kyiv (1986).
V. L. Rvachov, Theory of R-Functions and Some Its Applications [in Russian], Naukova Dumka, Kiev (1982).
Yu. N. Shevchenko, M. E. Babeshko, and R. G. Tereknov, Thermal Viscoelastoplastic Processes in Complex Deformation of Structural Elements [in Russian], Naukova Dumka, Kiev (1992).
H. Altenbach and K. Naumenko, “Shear correction factors in creep-damage analysis of beams, plates and shells,” JSME Int. J. Ser. A , 45, No. 1, 77–83 (2002).
H. Altenbach, K. Morachkovsky, K. Naumenko, and A. Sychov, “Zum Kriechen dunner Rotationsschalen unter Einbeziehung geometrisher Nichtlinearitat sowie der Asymmetrie der Werkstoffeigenschaften,” Forschung im Ingenieurwesen, 62, No. 3, 47–57 (1996).
A. Galishin, A. Zolochevsky, A. Kühhorn, and M. Springmannm, “Transversal shear effect in moderately thick shells from materials with characteristics dependent on the kind of stress state under creep-damage conditions: Numerical modeling,” Techn. Mech., 29, No. 1, 48–59 (2009).
A. Z. Galishin, “Determination of tangential stresses in axisymmetrically loaded layered shells of revolution in inelastic nonisothermal deformation processes,” Int. Appl. Mech., 29, No. 8, 637–644 (1993).
A. Z. Galishin, “Axisymmetric thermoviscoelastoplastic state of thin laminated shells made of a damageable material,” Int. Appl. Mech., 44, No. 4, 431–441 (2008).
K. Naumenko, “On the use of the first order shear deformation models of beams, plates and shells in creep lifetime estimations,” Tech. Mech., 20, No. 3, 215–226 (2000).
Yu. N. Shevchenko and A. Z. Galishin, “Determination of the axially symmetric geometrically nonlinear thermoviscoelastoplastic state of thin layered shells with regard for the damageability of the material,” J. Math. Sci., 162, No. 2, 216–230 (2009).
Yu. N. Shevchenko, A. Z. Galishin, and M. E. Babeshko, “Thermoviscoelastoplastic deformation of compound shells of revolution made of a damageable material,” Int. Appl. Mech., 51, No. 6, 607–613 (2015).
S. M. Sklepus, “Solution of the axisymmetric problem of creep and damage for a piecewise homogeneous body with an arbitrary shape of a meridian section,” J. Math. Sci., 205, No. 5, 644–658 (2015).
A. Zolochevsky, S. Sklepus, A. Galishin, A. Kühhorn, and M. Kober, “A comparison between the 3D and the Kirchhoff–Love solutions for cylinders under creep-damage conditions,” Tech. Mech., 34, No. 2, 104–113 (2014).
A. Zolochevsky, A. Galishin, S. Sklepus, L. Parkhomenko, V. Gnitko, A. Kühhorn, M. Kober, and C. Leyens, “Benchmark creep tests for thermal barrier coating,” Vestnik NTU “KhPI”, No. 23, 159–179 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 54, No. 1, pp. 78–89, January–February, 2017.
Rights and permissions
About this article
Cite this article
Galishin, A.Z., Sklepus, S.N. Estimating the Strength of Layered Cylindrical Shells Under Creep. Int Appl Mech 54, 64–74 (2018). https://doi.org/10.1007/s10778-018-0860-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0860-8