An algorithm for numerical analysis of the elastoplastic stress–strain state of thin shells that deform along small-curvature paths under axisymmetric nonisothermal loading is developed. Repeated plastic strains are taken into account. The stress–strain state of a shell during heating and cooling is numerically analyzed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Variable Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
V. V. Novozhilov, Theory of Thin Shells [in Russian], Sudpromgiz, Leningrad (1962).
Yu. N. Shevchenko and I. V. Prokhorenko, Theory of Elastoplastic Shells under Nonisothermic Loading, Vol. 3 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
Yu. N. Shevchenko and V. G. Savchenko, Thermoviscoplasticity, Vol. 2 of the five-volume series Mechanics of Coupled Fields in Structural Elements [in Russian], Naukova Dumka, Kyiv (1987).
Yu. N. Shevchenko et al., “A method for predicting the operating and limiting states of critical systems in rocketry under repeated thermal and mechanical loadings,” Nauka Innovats., 11, No. 5, 25–36 (2015).
M. E. Babeshko, A. Z. Galishin, A. I. Semenets, and Yu. N. Shevchenko, “Influence of the stress mode on the strength of high-pressure vessels,” Int. Appl. Mech., 51, No. 3, 319–325 (2015).
M. E. Babeshko and Yu. N. Shevchenko, “Studying the axisymmetric thermoviscoelastoplastic deformation of layered shells taking into account the third deviatoric stress invariant,” Int. Appl. Mech., 50, No. 6, 615–626 (2014).
R. Hill, The Mathematical Theory of Plasticity, Clarendon Press, Oxford (1950).
Yu. N. Shevchenko and V. G. Savchenko, “Three-dimensional problems of thermoviscoplasticity: Focus on Ukrainian research (review),” Int. Appl. Mech., 52, No. 3, 217–271 (2016).
P. A. Steblyanko and Yu. N. Shevchenko, “Computational methods in stationary and nonstationary thermal-plasticity problems,” Vol. 2 of the 11-volume Encyclopedia of Thermal Stresses, Springer, New York (2014), pp. 623–630.
M. Zyczkowski, Combined Loadings in the Theory of Plasticity, PWN-Polish Scientific Publishers, Warsaw (1981).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 53, No. 6, pp. 40–48, November–December, 2017.
Rights and permissions
About this article
Cite this article
Babeshko, M.E., Savchenko, V.G. Analyzing Processes of Nonisothermal Loading of Shells of Revolution with Allowance for Repeated Plastic Strains. Int Appl Mech 53, 639–646 (2017). https://doi.org/10.1007/s10778-018-0846-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0846-6