The stress–strain state of an inhomogeneous hollow cylinder with different boundary conditions at the ends is analyzed using the three-dimensional theory of elasticity. Spline collocation is used to reduce the two-dimensional boundary-value problem to a boundary-value problem for a system of ordinary differential equations of high order with respect to the radial coordinate, which is solved with the stable discrete-orthogonalization method. The results obtained using the spline-collocation, Fourier-series, and finite-element methods are compared
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
O. C. Zienkiewicz, The Finite-Element Method in Engineering Science, McGraw-Hill, New York (1971).
V. I. Kozlov and S. N. Yakimenko, “Thermomechanical behavior of viscoelastic solids of revolution during axisymmetric harmonic deformation,” Int. Appl. Mech., 25, No. 5, 443–448 (1989).
V. Birman and L. W. Byrd, “Modeling and analysis of functionally graded materials and structures,” Appl. Mech. Rev., 60, 195–215 (2009).
E. Ghafoori and M. Asghari, “Three-dimensional elasticity analysis of functionally graded rotating cylinders with variable thickness profile,” in: Proc. Institute of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 226, No. 3, 585–594 (2012).
A. Ya. Grigorenko, A. S. Bergulev, and S. N. Yaremchenko, “Numerical solution of bending problems for rectangular plates,” Int. Appl. Mech., 49, No. 1, 81–94 (2013).
Ya. M. Grigorenko and A. Ya. Grigorenko, “Static and dynamic problems for anisotropic inhomogeneous shells with variable parameters and their numerical solution (review),” Int. Appl. Mech., 49, No. 2, 123–193 (2013).
A. Ya. Grigorenko, W. H. Muller, R. Wille, and S. N. Yaremchenko, “Numerical solution of the problem on the stress-strain state in hollow cylinders using spline-approximations,” J. Math. Sci., 180, No. 2, 135–145 (2012).
A. Ya. Grigorenko, O. V. Vovkodav, and S. N. Yaremchenko, “Stress–strain state of nonthin spherical shells of variable thickness under localized loads,” Int. Appl. Mech., 49, No. 3, 315–321 (2013).
Ya. M. Grigorenko, A. Ya. Grigorenko, and G. G. Vlaikov, Problems of Mechanics for Anisotropic Inhomogeneous Shells on the Basis of Different Models [in Russian], Akademperiodika, Kyiv (2009).
M. Kashtalyan, “Three-dimensional elasticity solution for bending of functionally graded rectangular plates,” Europ. J. Mech.- A/ Solids, 23, No. 5, 853–864 (2004).
M. Koizumi, “The concept of FGM ceramic transactions,” Funct. Gradient. Mater., 34, 3–10 (1993).
Y. Miyamoto, W. A. Kaysser, B. H. Rabin, A. Kawasaki, and R. G. Ford, Functionally Graded Materials, Design, Processing and Applications, Kluwer Academic Publishers, Boston (1999).
S. Suresh and A. Mortensen, Fundamentals of Functionally Graded Materials, Maney, London (1998).
B. Woodward and M. Kashtalyan, “Three-dimensional elasticity solution for bending of transversely isotropic functionally graded plates, Europ. J. Mech.- A/Solids, 30, No. 5, 705–718 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 52, No. 4, pp. 16–24, July–August, 2016.
Rights and permissions
About this article
Cite this article
Grigorenko, A.Y., Yaremchenko, S.N. Analysis of the Stress–Strain State of Inhomogeneous Hollow Cylinders. Int Appl Mech 52, 342–349 (2016). https://doi.org/10.1007/s10778-016-0757-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-016-0757-3