A technique for numerical analysis of the thermoviscoelastoplastic deformation of thin compound shells made of a damageable material in which a fracture front propagates is described. A procedure for automatic variation in the step of integration of the kinetic damage equation is developed. A two-layer cylindrical shell cooling by convection and subjected to internal pressure and tensile force is analyzed as an example. The numerical data are presented and analyzed
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. O. Anishchenko and O. K. Morachkovskii, “Review of solutions of creep and fracture problems for fir-tree roots of blades of gas turbine engines,” in: Trans. National Polytechnic University “KhPI” [in Russian], Issue 38 (Dynamics and Strength of Machines), NTU “KhPI,” Kharkiv (2007), pp. 8–13.
V. A. Bazhenov, A. I. Gulyar, S. O. Piskunov, and V. P. Andrievskii, “Solving problems of thermoviscoelastoplastic and continuous fracture of prismatic bodies,” Int. Appl. Mech., 45, No. 12, 1331–1343 (2009).
A. Z. Galishin, “Axisymmetric thermoviscoelastoplastic state of thin laminated shells made of a damageable material,” Int. Appl. Mech., 44, No. 4, 431–441 (2008).
A. Z. Galishin, P. A. Steblyanko, and Yu. N. Shevchenko, “Determining nonstationary temperature fields in thin laminated shells of revolution subject to axisymmetric heating,” in: Trans. Dniprodzerzhinsk State Technical University [in Russian], Issue 2(19) (Mathematical Problems of Engineering Mechanics), DDTU, Dniprodzerzhinsk (2012), 3–12.
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells with Variable Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
L. M. Kachanov, Fundamentals of Fracture Mechanics [in Russian], Nauka, Moscow (1974).
O. A. Loginov, “Propagation of a fracture front in a thick-walled pipe under creep,” in: Reliability and Strength of Mechanical Engineering Structures [in Russian], Kuibyshev (1988), pp. 61–67.
A. F. Nikitenko, “Estimation of the fracture front propagation time in structural components,” Strength of Materials, 39, No. 6, 572–580 (2007).
S. O. Piskunov, O. I. Gulyar, and Yu. V. Maksim’yuk, “An algorithm for solving a geometrically nonlinear problem of viscoelastoplasticity for two-dimensional bodies,” in: V. A. Bazhenov (ed.), Strength of Materials and Theory of Structures [in Ukrainian], Issue 83, KNUBA, Kyiv (2009), pp. 25–42.
Y. N. Rabotnov, Creep Problems in Structural Members, North-Holland, Amsterdam (1969).
Yu. N. Shevchenko, R. G. Terekhov, N. S. Braikovskaya, and S. M. Zakharov, “Failure processes of a body element as a result of creep-induced material damage,” Int. Appl. Mech., 30, No. 4, 264–271 (1994).
H. Altenbach, J. Altenbach, and A. Zolochevsky, “A generalized constitutive equation for creep of polymers at multiaxial loading,” Mech. Comp. Mater., 31, No. 6, 511–518 (1995).
J. Betten, Creep Mechanics, Springer-Verlag, Berlin (2002).
J. Betten, S. Sklepus, and A. Zolochevsky, “A creep damage model for initially isotropic materials with different properties in tension and compression,” Eng. Fract. Mech., 59, 623–641 (1998).
J. T. Boyle and J. Spence, Stress Analysis for Creep, Butterworth and Co., London (1983).
G. G. Chen and T. R. Hsu, “The role of plastic strains in creep crack growth,” Eng. Fract. Mech., 39, No. 3, 493–506 (1991).
A. Galishin, A. Zolochevsky, A.Kühhorn, and M. Springmann, “Transversal shear effect in moderately thick shells from materials with characteristics dependent on the kind of stress state under creep-damage conditions: Numerical modeling,” Techn. Mech., 29, No. 1, 48–59 (2009).
D. R. Hayhurst, “Creep rupture under multi-axial states of stress,” J. Mech. Phys. Solids, 20, 381–390 (1972).
D. R. Hayhurst, “The prediction of creep-rupture times of rotating disks using biaxial damage relationships,” Trans. ASME, J. Appl. Mech., No. 4, 915–920 (1973).
M. Kawai, “Constitutive modeling of creep and damage behaviors of the non-Mises type for a class of polycrystalline metals,” Int. J. Damage Mech., No. 11, 223–246 (2002).
L. P. Khoroshun and L. V. Nazarenko, “Deformation and damage of composites with anisotropic components (review),” Int. Appl. Mech., 49, No. 4, 388–455 (2013).
L. P. Khoroshun and E. N. Shikula, “Coupled processes of deformation and long-term damage of physically nonlinear laminated materials,” Int. Appl. Mech., 49, No. 6, 650–657 (2013).
L. P. Khoroshun and E. N. Shikula, “Deformation and long-term damage of physically nonlinear fibrous materials,” Int. Appl. Mech., 50, No. 1, 58–67 (2014).
C. Shin, B. Moran, and T. Nakamura, “Energy release rate along a three-dimensional crack front in a thermally stressed body,” Int. J. Fract., 30, 79–102 (1986).
F. K. G. Odqvist, Mathematical Theory of Creep and Creep Rupture, Oxford University Press, Oxford (1974).
A. Zolochevsky, A. Galishin, S. Sklepus, and G. Z. Voyiadjis, “Analysis of creep deformation and creep damage in thin-walled branched shells from materials with different behavior in tension and compression,” Int. J. Solids Struct., 44, 5075–5100 (2007).
A. Zolochevsky, A. Galishin, A.Kühhorn, and M. Springmann, ”Transversal shear effect in moderately thick shells from materials with characteristics dependent on the kind of stress state under creep-damage conditions: Theoretical framework,” Techn. Mech., 29, No. 1, 38–47 (2009).
A. Zolochevsky, S. Sklepus, A. Galishin, A. Kühhorn, and M. Kober, “A comparison between the 3D and the Kirchhoff–Love solutions for cylinders under creep-damage conditions,” Techn. Mech., 34, No. 2, 104–113 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 51, No. 6, pp. 3–11, November–December 2015.
Rights and permissions
About this article
Cite this article
Shevchenko, Y.N., Galishin, A.Z. & Babeshko, M.E. Thermoviscoelastoplastic Deformation of Compound Shells of Revolution Made of a Damageable Material. Int Appl Mech 51, 607–613 (2015). https://doi.org/10.1007/s10778-015-0717-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-015-0717-3