Abstract
It is generally accepted that the world's reliance on fossil fuels had negative implications, such as a decline in crude oil supply, a drop in air quality, an increase in global temperature, unpredictable weather change, etc. Biofuel production is one of the best options for minimizing the quantity of conventional fuel used. This article presents theoretical and practical methods for process improvement, as well as a brief review of the characteristics of bioethanol production and limitations by using various pre-treatment techniques with wastes such as fruit and lignocellulose biomass to ethanol production using various microbe species. Bioethanol has a variety of applications, including petrol blending, solvent use, and distillery sectors. The pH (4–4.3), temperature (32 °C), and kind of microorganisms all have a significant impact on bioethanol production. Many significant phenolic chemicals and bioactive substances have been extracted from waste during bioethanol manufacturing. The approaches discussed in this study, such as pre-treatment, extraction, and distillation, can enhance the yield of bio-ethanol, which can be beneficial in many ways in the future.
Graphical abstract
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Crude oil is the most significant source of energy. It contributes about 35% of total energy consumption of the world (Dominik and Rainer 2007; Jonathan 2008). After 2010, the demand for crude oil had been increased for multiple applications as per many reports (Ayodele et al. 2020). Petroleum-based goods will remain the dominant source of energy until at least 2030. Despite the expectation for oil reserves, the cost of renewable resources has surely risen, and rural communities have been pushed to boost their economic productivity (Morshabul et al. 2023).
Concerns over conventional fuel depletion (oil, natural gas, and coal), global warming, and the attendant environmental issues have lately spurred academics and politicians to focus on developing alternative energy sources (Izmirlioglu 2016). The dramatic increase in crude oil prices, as well as concerns about its availability, have been cited as major factors driving demand for alternative renewable energy sources that may be cheap and sustainable (Schwab et al. 2016; Robak and Balcerek 2018). India is world’s second-largest producer of sugar cane, maize, pulses, cotton, wheat, millets and oil seeds (Saini et al. 2019). Subsequently India has a great potential in field of biofuel production (Harinikumar et al. 2020; Machineni 2020). Consequently, biofuel development could be considered as an alternative to reduce high dependence on non-renewable energy resources (Derman et al. 2018).
Biofuel have been produced from biodegradable wastes, so that nature wise it is nontoxic, sulfur-free and lower GHG (Greenhouse gases) emitter. Biofuel is mainly categorized in to four generations, first-generation biofuels are produced using oil-based plants, sugar, and starch outputs (Ullah et al. 2017). The first generation of biofuels adds to the dispute between fuel and food, although second generation biofuel produced from sustainable lignocellulosic biomass which reduced food safety issues (Li et al. 2017; Jin et al. 2015). Third generation biofuels derived from algae can be generated on a massive scale, absorb CO2, and are relatively easy to refine, and have received a lot of attention. Engineered cyanobacterial and algal growth is an innovative and rapidly increasing pathway for the fourth generation of biofuels (Adeniyi et al. 2018; Sharma et al. 2020). Biofuels are commonly produced in the form of biodiesel, which is produced from vegetable oils, recycled wax, or animal fats, while bioethanol is produced from plants having sugar and starch through a fermentation process, and biogas, which is produced by anaerobic digestion of biodegradable waste (Xue et al. 2018).
Bioethanol
Any substance that contains sugar molecules such as sugarcane, corn, beetroot, rice straw, sweet sorghum, and algae are able to produce ethanol (Lin and Tanaka 2006). This process is typically divided into three steps: preparing the sugar-containing solution for fermentation; fermenting the sugar-containing solution; and finally recovering the ethanol from the fermented solution (Walker 2010). It should be noted that a number of factors, such as the kind of raw material used and the conversion method, might have an impact on the entire ethanol manufacturing process (Hiben 2013). Bioethanol production, technology, or utilization that have not been well researched or understood yet, these research gaps suggest chances of further research and improvement in this topic (Mukherjee et al. 2016; Melendez et al. 2022). Exploring novel feedstocks and developing efficient conversion technologies could help to enhance the sustainability and economic viability of bioethanol production (Rabbani et al. 2020). The pre-treatment of lignocellulosic biomass and subsequent enzymatic hydrolysis have been observed as critical steps in the conversion of cellulose and hemicellulose into fermentable sugars (Fu et al. 2021). Exploring innovative pre-treatment procedures, discovering superior enzymes, and improving enzymatic efficiency are all topics that need to be researched further to increase the efficiency and cost-effectiveness of bioethanol production (Ingrao et al. 2021). The fermentation process plays a vital role in converting sugars into ethanol, by improving fermentation efficiency using proper microbial strain we can increase ethanol yields. Bioethanol production generates various co-products and by-products such as lignin, distiller grains, and stillage. Developing novel methods and uses for co-products such as lignin valorization, animal feed formulations, or bio-based chemicals can improve the bioethanol industry's overall economic viability and sustainability (Manikandan et al. 2023). Several techniques have been used in the production of bioethanol (Kaya and Karaosmanoglu 2022). The choice of technique depends on the type of feedstock used and the desired end product. Some techniques can directly effects on the yield of ethanol like saccharification using cellulase and hemicellulase enzymes to convert cellulose and hemicellulose into fermentable sugars. Multiple distillation steps may be used to achieve higher ethanol concentrations. Membrane processes such as prevaporation or vapor permeation can be employed to achieve higher purity levels and reduce energy consumption compared to traditional distillation methods. Simultaneous Saccharification and Fermentation (SSF) in which saccharification and fermentation processes occur simultaneously (Saini and Sharma 2021) offers advantages such as reduced process time, increased ethanol yield, and reduced contamination risks. Consolidated Bioprocessing (CBP) technique aims to combine the saccharification and fermentation processes into a single step, involves certain strains of bacteria or fungi, that possess the ability to break down complex carbohydrates and convert sugars to ethanol (Liu et al. 2021). CBP has the potential to simplify the bioethanol production process and reduce costs. These are just a few examples of the techniques which can be used in bioethanol production. Certain modifications in existing bioethanol production processes can boost bioethanol production output including feedstock selection, pre-treatment methods, fermentation efficiency, and overall process integration. Advancements in technologies such as consolidated bioprocessing (CBP), genetic engineering (GE), and the use of non-food feedstocks hold promise for overcoming these limitations and making bioethanol production more sustainable, efficient, and economically viable. In this review mainly focus on biodegradable waste, such as fruit and lignocellulose biomass, and the suitable microorganisms with different type of pre-treatment techniques in purpose to overcome the drawbacks for new bioethanol advances. This may encourage researchers to work more in this field as bioethanol production from waste provides a comprehensive understanding of the potential, challenges, and opportunities associated with utilizing waste materials as a sustainable feedstock for bioethanol production, ultimately contributing to a more sustainable and circular economy for greener future.
Material and methodology
Bioethanol production pathway in case of fruit waste as a starting material
Fruit waste
Fruit waste, which includes seeds, peels, and other wasted fruit components that are unfit for meals, can be separated from household waste. Fruit waste can be used to make bioethanol instead of being thrown or left to decay. Through a fermentation process, the sugars included in the fruit waste are converted into bioethanol. The gathered fruit waste is a great feedstock for bioethanol synthesis, which contributes to a more sustainable and environmentally friendly approach to waste management and renewable energy generation (Chitranshi and Kapoor 2021).
Alkali pre-treatment
Fruit biomass was used at a loading of 5% (w/v), and different concentrations of sodium hydroxide (NaOH) at 1%, 3%, and 5% were applied. Additionally, a control group with 0% NaOH was used for comparison. The alkali pre-treatment process was carried out at a constant temperature (30 °C for 48 h). The pre-treatment was performed in a steady state within an incubator using 250 mL Erlenmeyer flasks. Following the alkali pre-treatment, 1 N HCl was added to the samples to adjust the pH (4.2–4.5) to the desired level based on the designated hydrolysis conditions. This step aimed to optimize the conditions for subsequent hydrolysis. To analyze the pre-treated samples and determine the content of total sugar (TS) and reducing sugar (RS), the researchers performed analytical tests (Sindhu et al. 2014) (Table 1).
Microorganism and inoculum
Fermentation process with novel Wickerhamomyces strain known as Wickerhamomyces sp. UFFS-CE-3.1.2 (GenBank access numbers MF538579 and MF538580). Saccharomyces cerevisiae, commonly known as baker's yeast, remains the foremost yeast strain utilized for industrial-scale ethanol production. Yeast growth medium: Yeast extract, peptone, and dextrose media (YPD) were used to prepare the yeast growth medium. The composition of YPD medium is 1% yeast extract, 2% peptone, 2% glucose, and 2% agar. Agar is commonly used for growing microorganisms in a solid form and solidify the media. Preparing the yeast culture, test tubes containing 10 mL of the YPD medium were inoculated with the Wickerhamomyces sp. UFFS-CE-3.1.2 strain. The tubes were placed in an incubator at 30 °C for 72 h on a solid inclined plane. This step allowed the yeast to grow and form colonies on the solid medium. After the incubation period on the solid medium, the yeast was transferred to tubes containing 10 mL of liquid YPD medium without agar. The liquid YPD medium was then incubated for 24 h at 30 °C. This step allowed the yeast to grow and multiply in the liquid medium. After the 24–48 h incubation of the liquid YPD medium, approximately 10% (v/v) of the liquid medium containing the yeast cells was added to the fermentation broth as inoculation of fermentation broth. The fermentation broth is the medium in which the actual ethanol production takes place. The yeast cells act as inoculants, initiating the fermentation process by converting sugars into ethanol. Table 2 describes ethanol production from several types of microorganisms, including ethanol yield, temperature, pH value, carbon–nitrogen sources, and incubation period.
Ethanol fermentation
In the process of producing bioethanol, anaerobic respiration is most commonly observed after hydrolysis. After producing 2% T. harzianum hydrolysates, these hydrolysates were used to continue the fermentation process. For this purpose, 2% v/v of S. cerevisiae (dry yeast) was injected into the hydrolysates. The fermentation process was initiated by maintaining a temperature 36 °C for 72 h. Samples were collected at 24 h intervals to monitor the production of ethanol. In the study conducted by (Casabar et al. 2019), it was observed that the highest production of bioethanol occurred at 48 h of incubation, resulting in a yield of 5.98 ± 1.01 g/L. At 24 h and 72 h of incubation, the ethanol yields were 5.31 ± 1.76 g/L and 4.5 ± 0.72 g/L, respectively. These findings indicate that the fermentation process using the T. harzianum hydrolysates and S. cerevisiae as the yeast source was most efficient in producing bioethanol at 48 h of incubation. The ethanol yields slightly decreased at 24 h and 72 h, suggesting that the optimal fermentation time for maximum ethanol production was at 48 h. Figure 1 explains production of bioethanol from lignocellulose biomass.
Chemical composition of lignocellulose biomass
Primary and secondary walls exist in plant biomass, each having distinct functions and compositions. The primary wall is high in pectin and low in cellulose, whereas the secondary wall is mostly lignocellulose, which comprises cellulose, hemicellulose, and lignin. These components are critical in establishing the structure and properties of lignocellulosic substrates (Ornaghi et al. 2020; Cristele 2017). The lignocellulosic biomass is mostly composed of three basic biopolymers: cellulose, hemicellulose, and lignin. Each of these components contributes the overall structure and properties of the biomass, and their arrangement as shown in Fig. 2 (Hernandez-Beltran et al. 2019) (Table 3).
Steps of bioethanol production from LCB (lignocellulose biomass)
In the production of bioethanol from Lignocellulosic Biomass (LCBs), the pre-treatment stage is considered the most expensive and limiting step, followed by hydrolysis and fermentation (Satari et al. 2019). However, appropriate pre-treatment techniques can significantly improve the overall process efficiency by increasing the number of fermentable sugars after enzymatic saccharification (Maurya et al. 2015). Figure 3 illustrated the Structure of lignocellulosic biomass and its biopolymers; cellulose, hemicellulose, and lignin. During the pre-treatment stage, reducing sugars like arabinose, galactose, fructose, and mannose are released from LCBs. Overall, Fig. 4 illustrates the entire procedure for producing bioethanol from lignocellulosic biomass, depicting the various stages involved, including pre-treatment, hydrolysis, and fermentation, to ultimately obtain bioenergy in the form of bioethanol (Fig. 5).
Pre-treatment
Pre-treatment is indeed the initial and critical stage in the production of bioethanol from lignocellulosic biomass. It is considered the most important, challenging, and expensive phase of the entire process (Kumar and Sharma 2017). The basic purpose of any pre-treatment procedure is to delignify the lignocellulosic biomass by changing the structure of cellulose and hemicellulose to make them more accessible to hydrolysis and thereby boosting bioethanol output. The pre-treatment procedure might have three major goals: increasing biomass surface area, dissolving hemicellulose and/or lignin, and lowering biomass particle sizes. To meet the objective of pre-treatment, the structure of LCBs can be changed either chemically or physically. The hydrolysis of cellulose is considerably improved by increasing the accessibility of acids or enzymes to the surface of cellulose (Kumari and Singh 2018). Below Fig. 6 likely provides an overview of different pre-treatment techniques for lignocellulosic biomass and their characteristics, helping researchers to select the most suitable method for the bioethanol production process.
In the production of bioethanol, the fermentation technique faces challenges in incorporating lignin-carbohydrate complexes as they are resistant components of the LCB structure (Bhowmick et al. 2018). To address this, delignification becomes a crucial step in the process, involving the removal of lignin from LCB using various enzymatic, chemical, or natural processes (Miranda et al. 2019). Once the recalcitrant compounds, including lignin, have been removed from the biomass, the LCB can be further degraded chemically or biologically (Molaverdi et al. 2019). Fruit waste, for example, has a high lignin component and accounts for the greatest amount of biomass among non-wood biomass wastes, ranging from 17 to 32% (Arni 2018). Efficient delignification process can be increasing the surface area of the biomass (Singh et al. 2014). Lignin removal is especially essential since it reduces the availability of sugars, and remaining lignin can greatly inhibit the conversion of cellulose to bioethanol. A large proportion of recoverable carbs may be recovered by successfully eliminating lignin (Galbe and Zacchi, Pretreatment: The key to efficient utilization of lignocellulosic materials 2012). Not all pre-treatment processes eliminate lignin. Instead, the structure of lignin may be changed in some situations. Surprisingly, raw biomass can be more digestible than pre-treated biomass, although having a same lignin content (Agbor et al. 2011). Figure 5 describes Fractionating LCB to bioethanol production (Table 4).
Hydrolysis
A critical stage in the manufacturing of bioethanol is hydrolysis, which tries to break down cellulose and/or hemicellulose into readily fermentable sugars. Because of its crystalline form, cellulose provides more hydrolysis issues than hemicellulose. As a result, either the use of an acid, known as chemical hydrolysis or the use of specialized enzymes, known as enzymatic hydrolysis, can help in the breakdown of cellulose (also referred to as biochemical hydrolysis or saccharification) (Mazhad et al. 1995).
Chemical hydrolysis
Chemical hydrolysis can be conducted with dilute acid or strong acid. Dilute acid hydrolysis involves the use of sulfuric acid at concentrations of 1–3% for a short duration, typically around 3 min, and temperatures range between 180 to 240 °C (Zhao et al. 2020). However, this approach has drawbacks in that it produces a very low glucose conversion rate of roughly 60% and a considerable amount of pentose sugars are converted into furfuraldehyde, limiting overall efficiency. A two-step hydrolysis technique was devised to overcome these obstacles and improve yields while resolving inhibitor-related concerns. Hemicelluloses are solubilized in the first stage at 140–160 °C, and cellulose is converted in the second step at 160–180 °C. The sugar recovery rate with this method can reach up to 80%. Strong acid hydrolysis, on the other hand, is a two-step process that uses greater acid concentrations of 20–40% and operates at lower temperatures 50–100 °C. This approach has a greater sugar recovery rate of around 90%. However, dealing with acid corrosion and recycling necessitates a larger expenditure. Presently, chemical hydrolysis has become less attractive and less competitive due to the cost of reagents and the production of inhibitors, which may necessitate additional purification steps to obtain the desired bioethanol yield (Hamelinck et al. 2005).
Enzymatic hydrolysis
In enzymatic hydrolysis enzymes, which are big proteins with high molecular weights, operate as effective biological catalysts. This method includes the conversion of cellulose and hemicelluloses into simple sugars with the use of particular enzymes released by microorganisms such as bacteria and fungi. Enzymes are extremely selective and adaptable, allowing for full cellulose to glucose conversion without the production of unwanted by-products or inhibitors. This makes enzymatic hydrolysis a very appealing alternative to chemical hydrolysis, which frequently suffers from partial conversion and inhibitor production. Enzymatic hydrolysis acts at lower temperatures and pH levels (about 50 °C and pH 5), avoiding the corrosion difficulties associated with chemical hydrolysis. Despite its potential, enzymatic hydrolysis remains a significant barrier in the lignocellulosic bioethanol sector due to challenges in extracting sugars from hemicellulose breakdown (Galbe and Zacchi 2007). The cost of producing enzymes and the large quantities required for transforming lignocellulosic materials create hindrances to the development of second-generation bioethanol. To address these issues, research and development efforts are being directed on lowering enzyme manufacturing costs, increasing enzyme activity, and generating novel cellulolytic enzyme combinations (Abo et al. 2011). The objective is to match or come close to the yield and cost levels of enzymatic hydrolysis in amylaceous (starch-based) substrates used in first-generation ethanol production. As pointed out, the economic feasibility of bioethanol from lignocellulosic materials is strongly reliant on advancements in the enzymatic hydrolysis step (Abo et al. 2019).
Different processes of bioethanol conservation
Bioethanol synthesis from lignocellulosic biomass requires a biochemical route involving multiple hydrolysis and fermentation techniques. These procedures might be carried out simultaneously in a single reactor or separately. These methods include Simultaneous Saccharification and Fermentation (SSF), Separate Hydrolysis and Fermentation (SHF), Consolidated Bioprocessing (CBP), Dilute Acid Hydrolysis, Enzymatic Hydrolysis, Fermentation, Distillation, Dehydration, and Rectification. The choice of process is determined by factors like the nature of the feedstock, scale of production, available technology, and economic feasibility. Each method presents its own advantages and challenges in the production of bioethanol from lignocellulosic sources. Table 5 summarizes the various ways of converting lignocellulosic biomass to ethanol.
Simultaneous saccharification and fermentation (SSF)
The most commonly used process for bioethanol production is the SSF method (Zabed et al. 2016). It involves conducting enzymatic hydrolysis and ethanol fermentation together in the same reactor. This approach offers several advantages, including lower investment costs compared to using separate reactors (Balat 2011). Because the sugars are fermented immediately after synthesis, the possibility of enzyme inhibition and contamination by hydrolysis end products (glucose and cellobiose) reduces (Krishna et al. 2001). However, one significant disadvantage of the SSF technique is that the enzymatic yield is not ideal due to the lower temperature employed (less than 37 °C) to maintain the yeasts, which are temperature sensitive (Triwahyuni et al. 2015). Some researchers have employed thermophilic yeasts to progressively increase yield to solve this issue. SSF and SHF are the two primary configurations of lignocellulosic biomass bioethanol manufacturing technologies. Overall, the SSF process has been considered to be superior to the SHF method in terms of ethanol output and concentration several supports the same (Kim et al. 2010; Niklitschek et al. 2010; Rana et al. 2014). However, by optimizing the hydrolysis and fermentation temperatures, some researchers have produced higher yields with the SHF technique. While the SHF process can offer greater yields under certain conditions, the SSF method has shorter processing durations, resulting in higher ethanol production. The decision between SSF and SHF is influenced by process factors, substrate properties, and target ethanol output and productivity (Cantarella et al. 2004).
Separate hydrolysis and fermentation (SHF)
In this method, the hydrolysis and fermentation reactions occur in separate reactors, allowing for optimal conditions for each stage (Ask et al. 2012). The hydrolysis of cellulase, operates at 45–50 °C, while the fermentation takes place at 30–37 °C. Despite the advantages, there are several drawbacks to this approach (Paulova et al. 2015). Cellulase and β-glucosidase inhibition can occur due to the accumulation of cellulose and glucose in the hydrolysate. Additionally, using two reactors can increase the investment required, although a second reactor may not always be necessary if operated in batch mode (Khramtsov et al. 2011). Nevertheless, the SHF process provides the advantage of being able to recycle yeast fermentation, which is not always feasible with other methods (Roca and Olsson 2003).
Direct conversion (Consolidated bioprocessing) (CBP)
Direct conversion is a one-step process that integrates enzyme synthesis, saccharification, and fermentation in a single operation by a specialized microorganism or microbial consortia. Notably, this approach does not need substrate pre-treatment, while some researchers have referred to this technique are needed enzyme addition separately when pre-treatment is not required (Zerva et al. 2014). CBP is intriguing because it eliminates the need for several reactors, simplifies overall operation, and increases the competitiveness of lignocellulosic bioethanol production. However, its effectiveness is dependent on the development of an appropriate and effective microbial organism or consortium, which can be difficult. Although CBP is an efficient one-step method for lignocellulosic bioethanol synthesis, the creation of a suitable microbial system is critical to its effective deployment (Paulova et al. 2015).
Simultaneous saccharification and co-fermentation (SSCF)
Many bioethanol production systems either do not use xylose or need two stages of fermentation. The Simultaneous Saccharification and Co-Fermentation (SSCF) technique is used to overcome this and further minimize investment costs. The SSCF method enables the simultaneous hydrolysis and fermentation of two sugars, glucose, and xylose, in the same reactor. However, bacteria are capable of efficiently absorbing both glucose and xylose with high yields are necessary for successful SSCF. While the yeast S. cerevisiae is well-known for its excellent glucose fermentation, it has a low potential for xylose fermentation. Various attempts to enhance xylose fermentation have resulted in the discovery of microorganisms and systems capable of fermenting both glucose and xylose. Researchers use genetic engineering to add specific metabolic pathways for pentose utilization into yeast strains, which is critical in this attempt. One such study by Ohgren et al. involved using a recombinant TMB3400 strain of S. cerevisiae, which showed a significant increase in ethanol yield from 54 to 64% in a batch reactor without prior detoxification. The study also highlighted that the glucose concentration affects xylose consumption and suggested that the fed-batch mode is advantageous to prevent glucose accumulation. The SSCF process enables simultaneous fermentation of glucose and xylose, but its success relies on the development of microorganisms with improved xylose fermentation capabilities. Genetic engineering plays a crucial role in enhancing these fermentation processes, leading to more efficient bioethanol production from lignocellulosic biomass (Ohgren et al. 2006).
Distillation process
Distillation is a technique used to separate chemicals based on differences in their rates or ease of evaporation to produce bioethanol (Karimi et al. 2021). Before starting the distillation process, the sample is pasteurized by heating it at 80 °C for 10 min to destroy any germs or contaminants. Once pasteurized, the distillation process can activate. During distillation a high-quality bioethanol product will be obtained (Li and Li 2020).
Determination of bioethanol production
Testing the quality of bioethanol involves a range of measurements and assessments to ensure it meets the required standards for various applications. Some of the key quality tests for bioethanol include Density and Content Measurement: The density of bioethanol, which is the mass per unit volume, is measured to determine its concentration and purity. The content of ethanol in the bioethanol sample is also analyzed to ensure its purity. Specific Gravity (SG) and API Gravity: Specific gravity is the ratio of the density of a substance to the density of a reference substance (usually water). API gravity is a specific gravity scale used in the petroleum industry to measure the relative density of liquids. These measurements provide insights into the density and composition of bioethanol. Calorific Value: The calorific value, also known as the heat value or energy content, is determined to assess the energy density of bioethanol. It quantifies the amount of heat energy released during the combustion of bioethanol and is crucial for evaluating its fuel efficiency. Yield Measurement: The yield is calculated as the percentage of bioethanol obtained from the raw material or feedstock used in the production process. It reflects the efficiency of the conversion process and the overall quality of the bioethanol. pH Testing: The pH of bioethanol is checked to ensure it falls within the acceptable range. The pH value affects the stability and reactivity of bioethanol in various applications. Physical Characteristics: The physical properties of bioethanol, such as color, odor, appearance, and clarity, are examined to detect any signs of contamination or impurities.
These tests and assessments play a crucial role in determining the quality of bioethanol and ensuring it meets the required specifications for its intended use, whether it be as a fuel additive, industrial solvent, or other applications. Regular and accurate quality testing is essential to maintain the consistency and safety of bioethanol production.
Determination of ethanol using gas chromatography-flame ionization detection (GC-FID)
In the analysis of ethanol concentration in the supernatant obtained after centrifugation, Gas Chromatography with Flame Ionization Detector (GC-FID) was employed. The GC-FID apparatus used in this study is equipped with a DB-wax column with specific dimensions: 30 m in length, 0.25 mm in internal diameter, and a film thickness of 0.25 μm. The FID detector is utilized for detecting and quantifying the ethanol present in the sample (Sanchez, et al. 2020). The temperature conditions for the column oven during the GC-FID analysis like (a) 40 °C for 4 min, (b) 100 °C with a temperature ramp of 5 °C per minute, and (c) 200 °C at a rate of 10 °C per minute. These temperature conditions are crucial for the separation and detection of ethanol in the sample. The different temperature settings allow for the efficient resolution of ethanol peaks and accurate quantification. To determine the concentration of ethanol in the supernatant, a calibration curve was established using several ethanol standards. These standards were prepared by diluting 99.999% ethanol in various ratios to create a range of known concentrations (Setyo et al. 2020). By comparing the peak areas of the ethanol standards with those of the sample, the ethanol concentration in the supernatant can be identified and quantified accurately. This GC-FID analysis, along with the calibration curve, provides a reliable and precise method for determining the ethanol content in the supernatant, allowing researchers to assess the efficiency of the bioethanol production process (Shah et al. 2019). Fourier transform infrared spectroscopy (FTIR) is a commonly employed technique for identifying functional groups in intricate organic mixtures and for comparing similarities between different substances. The wavenumbers at 3298, 3318, 3275, and 3292 cm−1 in the FTIR spectrum result from vibrations of the -OH groups, which originate from alcohol and pectic acid constituents found in the biomass (Orozco et al. 2014).
Statistical analysis – significance test
The accurate determination of ethanol content is crucial for assessing the efficiency of the bioethanol production process and ensuring the quality of the final product. In the study, the statistical significance of the experimental outcomes was assessed using Origin Pro software. A paired t-test was performed, and a Tukey test with a significance threshold of P less than 0.05 was used to determine the differences in significance between the Control (C), Dewaxed (D), Pre-treated (P), and D + P samples (Trejo et al. 2022). These tests allow researchers to compare the results of different treatments and combinations to identify any significant variations in the data. For the determination of ethanol content in the samples, various techniques can be employed, each has different advantages and limitations. Some of the commonly used methods include Densimetric methods (Lachenmeier et al. 2010), Potassium dichromate (Breisha 2010), Biosensor potentiometry (Rotariu et al. 2003), Gas chromatography (GC) (Wang et al. 2003), Capillary electrophoresis. Additionally, other techniques such as flow injection analysis (Rangel and Toth 2000), high-performance liquid chromatography (HPLC) (Shih and Smith 2009), Raman spectrometry (Oliver et al. 2014), near-infrared spectroscopy (NIR), and electrophoresis (Nosratpour et al. 2018) can also be utilized for ethanol determination. The selection of a specific method depends on factors like the required sensitivity, accuracy, and the nature of the sample matrix. Researchers may choose the most appropriate technique based on their experimental requirements and available resources.
The testing of these properties will be performed using specific ASTM (American Society for Testing and Materials) standard methods, which ensure standardized and reliable measurements (Hadeel et al. 2011). The ASTM standards used for testing the chemical properties are; Ethanol content—ASTM D5501, Methanol content—ASTM D1744, Water content—ASTM D1688, Copper (Cu) concentration—ASTM D512, Chlorine (Cl) concentration—ASTM D2622, Gum content—ASTM D381 (Olugbenga 2023). For the physical properties testing, ASTM standards will be applied like Heating value—ASTM D1613, Density—ASTM D240, Viscosity—ASTM D1298-99, Flashpoint—ASTM D445 and D93 (Tenkolu et al. 2022).
By following the ASTM standards, the analysis of these chemical and physical properties will be conducted with accuracy and consistency. These tests are essential to ensure the quality, safety, and compliance of bioethanol with established standards and regulations (Saleh and Al-Azzawi 2023).
Technology trends and barriers to ethanol production
Many process phases of bioethanol production are currently being improved, including pre-treatment, pentose fermentation, simultaneous saccharification and fermentation (SSF), downstream processing, and by-product reduction (Su et al. 2020). The pre-treatment stage, in particular, is an expensive phase, accounting for several studies 11 to 27% of ethanol production expenses, depending on the pre-treatment method used. It needs to offer high sugar yields for later fermentation, have a low inhibitor concentration to prevent inhibiting fermentation, and successfully separate lignin and hemicellulose for further processing during the pre-treatment stage. Reducing costs in lignocellulosic ethanol production also involves optimizing extraction, washing, and neutralization stages, minimizing energy, reagents, catalysts, and water usage. Steam explosion stands out as one of the most efficient and cost-effective methods, particularly for agricultural residues and lignocellulose biomass. The presence of hemicellulose during hydrolysis results in the creation of pentoses, which are less fermentable than glucose. Because pentose derivatives can account for a large amount of biomass weight, efficient pentose fermentation is critical to lowering ethanol production costs. SSF processes outperform SHF processes in terms of investment costs and cellulase inhibition induced by cellobiose build-up (Broda et al. 2022). However, temperature has a crucial role in saccharification and fermentation. Reducing water usage is also essential to minimize environmental impact, and research is exploring the possibility of fermentation in more concentrated media. The efficient separation of biomass constituents after pre-treatment and the valorization of lignin and hemicellulose are promising research directions (Zabed et al. 2016). The by-product of the fermentation process can be used as animal feed, in biogas plants, various valuable biochemicals, and bioplastics; which adds economic value to the industry. However, the overall cost is affected by challenges related to the use of organic solvents, which can be extracted for the next batch to make the final product cost-effective.
Advantages and future perspective of bioethanol
Bioethanol has major advantages and applications in future as it overcomes the problems occurred by fossil fuels (Himmel et al. 1997). At present, the majority of commercial bioethanol comes from sugarcane and corn. However, these sources alone cannot satisfy the growing demand for bioethanol or can’t replace significant amounts of conventional fuels consumed worldwide. In this study, main focus is to obtain bioethanol from waste or other sources, especially from lignocellulosic biomass. When compared to gasoline, bioethanol has the potential to reduce greenhouse gas emissions significantly and carbon cycle neutral. Bioethanol production can be a boon for rural economies and diversify the agricultural sector. The combustion of bioethanol produces fewer pollutants such as sulfur oxides, particulate matter, and volatile organic compounds compared to conventional gasoline, leading to improved air quality and reduced health risks (Das et al. 2023). Current biofuel technology research and development may result in more efficient production methods, better energy outputs, and enhanced performance of bioethanol blends in current engines. Currently, most bioethanol is produced from starch or sugar-rich crops, but research is ongoing to develop technologies for cellulosic ethanol production. Advancements in biotechnology and fermentation processes could lead to higher conversion efficiencies. More countries are searching for efficient bioethanol production as awareness of climate change and the demand for sustainable energy sources grows, creating a global market for this renewable fuel. The government has set a target of 10% blending (10% bioethanol 90% petrol E10) of bioethanol with petrol by 2022 under the Ethanol Blended Program (EBP). Furthermore, they intend to boost this blending ratio to 20% (20% bioethanol 80% gasolineE20) by 2030 (Dhande et al. 2021). Government policies, incentives, and requirements targeted at boosting renewable energy sources can play an important role in promoting the widespread use of bioethanol and other biofuels.
Conclusion
The depletion of fossil fuels, which has increased greenhouse gas emissions, has motivated the search for alternative energy sources. Bioethanol stands out as a potential and sustainable renewable energy alternative among these. The depletion of fossil fuels, which has increased greenhouse gas emissions, has motivated the search for alternative energy sources. Bioethanol stands out as a potential and sustainable renewable energy alternative among these. The prospects of bioethanol are closely intertwined with advancements in genetic engineering of microorganisms, non-food crops, and waste biomass used in the fermentation process. The main goal of bioethanol is to develop microbes capable of efficiently breaking down lignocellulosic waste biomass or non-food crops into sugars for bioethanol production. Fruit and vegetable residues contain abundant amounts of simple and complex carbohydrates that can serve as raw materials for bioethanol production using microbial cultures. However, there is a rising emphasis on utilizing lignocellulosic biomass to produce bioethanol. To make this process economically viable, significant emphasis has been paid to the development of cellulolytic enzymes, the cost of which accounts for more than half of the total biomass saccharification expenditures. These enzymes can be improved by molecular engineering or genetic engineering of the microorganisms, resulting in lower bioethanol production costs. SHF is preferred optimal conditions independently in the field of bioethanol production and this technique has an advantage compared to SSF. Co-culturing two or more microbes can be employed to achieve a high yield of bioethanol. The study discussions demonstrated that the highest yield of bioethanol can be improved under specific conditions: pH 4, temperature of 32 °C, and using 3 g/L of yeast. Utilizing fruit and vegetable waste biomass have the benefit of being economically feasible and widespread availability, making it an ideal and ecologically beneficial solution for bioethanol production. The study inspires researchers to work further in the field of green chemistry to produce bioethanol at a lower cost.
Data availability
Enquiries about data availability should be directed to the authors.
Change history
08 March 2024
A Correction to this paper has been published: https://doi.org/10.1007/s10098-024-02780-8
Abbreviations
- GHG:
-
Greenhouse gases
- SSF:
-
Simultaneous saccharification and fermentation
- CBP:
-
Consolidated bioprocessing
- SHF:
-
Separate hydrolysis and fermentation
- SSCF:
-
Simultaneous saccharification and co-fermentation
- GE:
-
Genetic engineering
- TS:
-
Total sugar
- YPD:
-
Yeast extract, peptone, and dextrose media
- LCBs:
-
Lignocellulosic biomass
- GC-FID:
-
Gas chromatography-flame ionization detection
- FTIR:
-
Fourier transform infrared spectroscopy
- GC:
-
Gas chromatography
- NIR:
-
Near-infrared spectroscopy
- ASTM:
-
American society for testing and materials
- EBP:
-
Ethanol blended Program
References
Abbi M, Kuhad RC, Singh A (1996) Bioconversion of pentose sugars to ethanol by free and immobilized cells of Candida shehatae (NCL-3501): fermentation behavior. Process Biochem 31(6):555–560. https://doi.org/10.1016/S0032-9592(95)00104-2
Abo BO, Gao M, Wang Y, Wu C, Ma H, Wang Q (2011) Lignocellulosic biomass for bioethanol: an overview on pretreatment, hydrolysis and fermentation processes. Rev Environ Health 34:229–250. https://doi.org/10.1515/reveh-2018-0054/html
Abo BO, Gao M, Wang Y, Chuanfu Wu, Ma H, Wang Q (2019) Lignocellulosic biomass for bioethanol: an overview on pretreatment, hydrolysis and fermentation processes. Rev Environ Health 34(1):57–68. https://doi.org/10.1515/reveh-2018-0054
Adeniyi OM, Azimov U, Burlika A (2018) Algae biofuel: current status and future applications. Renew Sustain Energy Rev 90:316–335. https://doi.org/10.1016/j.rser.2018.03.067
Agbor VB, Cicek N, Sparling R, Berlin A, Levin DB (2011) Biomass pretreatment: fundamentals towasrd application. Biotechnol Adv 29(6):675–685. https://doi.org/10.1016/j.biotechadv.2011.05.005
Ahmed MA, Rehman MSU, Hilares RT, Khalid S, Han J-I (2017) Optimization of twin gear-based pretreatment of rice straw for bioethanol production. Energy Convers Manag 141:120–125. https://doi.org/10.1016/j.enconman.2016.06.022
Akhtar N, Goyal D, Goyal A (2017) Characterization of microwave-alkali-acid pre-treated rice straw for optimization of ethanol production via simultaneous saccharification and fermentation (SSF). Energy Convers Manag 141:133–144. https://doi.org/10.1016/j.enconman.2016.06.081
Alexandropoulou M, Antonopoulou G, Fragkou E, Ntaikou I, Lyberatos G (2017) Fungal pretreatment of willow sawdust and its combination with alkaline treatment for enhancing biogas production. J Environ Manag 203(2):704. https://doi.org/10.1016/j.jenvman.2016.04.006
Alvarez AL, Diaz-Perez AL, Sosa-Aguirre C, Rodriguez LM, Garcia JC (2012) Ethanol yield and volatile compound content in fermentation of agave must Kluyveromyces marxianus UMPe-1 comparing with Saccharomyces cerevisiae baker’s yeast used in tequila production. J Biosci Bioeng 113:614–618. https://doi.org/10.1016/j.jbiosc.2011.12.015
Arni SA (2018) Extraction and isolation methods for lignin separation from sugarcane bagasse: a review. Ind Crops Prod 115:330–339. https://doi.org/10.1016/j.indcrop.2018.02.012
Arora R, Behera S, Sharma NK, Kumar S (2015) A new search for thermotolerant yeasts, its characterization and optimization using response surface methodology for ethanol production. Sec. Microbiotechnol 6:889. https://doi.org/10.3389/fmicb.2015.00889
Arora A, Priya S, Sharma P, Sharma S, Nain L (2016) Evaluating biological pretreatment as a feasible methodology for ethanol production from paddy straw. Biocatal Agric Biotechnol 8:66–72. https://doi.org/10.1016/j.bcab.2016.08.006
Ask M, Olofsson K, Di Felice T, Ruohonen L, Penttila M, Liden G, Olsson L (2012) Challenges in enzymatic hydrolysis and fermentation of pretreated Arundo donax revealed by a comparison between SHF and SSF. Process Biochem 47(10):1452–1459. https://doi.org/10.1016/j.procbio.2012.05.016
Ayodele BV, Alsaffar MA, Mustapa SI (2020) An overview of integration opportunities for sustainable bioethanol production from first- and second-generation sugar-based feedstocks. J Clean Prod 245:118857. https://doi.org/10.1016/j.jclepro.2019.118857
Balat M (2011) Production of bioethanol from lignocellulosic materials via the biochemical pathway: a review. Energy Convers Manag 52(2):858–875. https://doi.org/10.1016/j.enconman.2010.08.013
Barua VB, Goud VV, Kalamdhad AS (2018) Microbial pretreatment of water hyacinth for enhanced hydrolysis followed by biogas production. Renew Energy 126:21–29. https://doi.org/10.1016/j.renen.2018.03.028
Breisha GZ (2010) Production of 16% ethanol from 35% sucrose. Biomass Bioenerg 34(8):1243–1249. https://doi.org/10.1016/j.biombioe.2010.03.017
Broda M, Yelle DJ, Serwanska K (2022) Bioethanol production from lignocellulosic biomass—challenges and solutions. Molecules 27(24):8717. https://doi.org/10.3390/molecules27248717
Cabrera E, Munoz MJ, Martin R, Ildefons C, Curbelo C, Diaz AB (2014) Alkaline and alkaline peroxide pretreatments at mild temperature to enhance enzymatic hydrolysis of rice hulls and straw. Biores Technol 167:1–7. https://doi.org/10.1016/j.biortech.2014.05.103
Campillo M, Diaz NU, Soto O, Barrio E, Rutiaga M, Peaz J (2012) Effect of glucose concentration on the rate of fructose consumption in native strains isolated from the fermentation of Agave duranguensis. World J Microbiol Biotechnol 28:3387–3391. https://doi.org/10.1007/s11274-012-1143-x
Cantarella M, Cantarella L, Gallifuoco A, Spera A, Alfani F (2004) Comparison of different detoxification methods for steam-exploded poplar wood as a substrate for the bioproduction of ethanol in SHF and SSF. Process Biochem 39(11):1533–1542. https://doi.org/10.1016/S0032-9592(03)00285-1
Casabar JT, Unpaprom Y, Ramaraj R (2019) Fermentation of pineapple fruit peel wastes for bioethanol production. Biomass Convers Boiorefin 9:761–765.
Chang Y-H, Chang K-S, Chen C-Y, Hsu C-L, Chang T-C, Jang H-D (2018) Enhancement of the efficiency of bioethanol production by saccharomyces cerevisiae via gradually batch-wise and fed-batch increasing the glucose concentration. Fermentation 4(2):45.
Charnnok B, Sakdaronnarong N, Sakdaronnarong C (2019) Hydrothermal pretreatment with sulfonated bentonite catalyst enhances potassium removal and bioconversion of oil palm empty fruit bunch to sugar and biohydrogen. Biomass Convers Biorefin 9:389–399.
Chen JH, Kun JX, Huang P-L, Sun RC (2016) Effect of alkaline pretreatment on the preparation of regenerated lignocellulose fibers from bamboo stem. Cellulose 23:2727–2739. https://doi.org/10.1007/s10570-016-0983-1
Chitranshi R, Kapoor R (2021) Utilization of over-ripened fruit (waste fruit) for the eco-friendly production of ethanol. Vegetos 34:270–276. https://doi.org/10.1007/s42535-020-00185-8
Cristele D (2017) Plant cell wall: description, role in transport, and effect of electroporation. Handbook of electroporation. Springer, Cham, Switzerland, pp 489–509
Das N, Jena PK, Padhi D, Mohanty MK, Sahoo G (2023) A comprehensive review of characterization, pretreatment and its applications on different lignocellulosic biomass for bioethanol production. Biomass Convers Biorefin 13:1503–1527. https://doi.org/10.1007/s13399-021-01294-3
De Bhowmick G, Sarmah AK, Sen R (2018) Lignocellulosic biorefinery as a model for sustainable development of biofuels and value added products. Biores Technol 247:1144–1155. https://doi.org/10.1016/j.biortech.2017.09.163
de Miranda Rita CM, Neta JV, Ferreira LFR, Junior WAG, do Nascimento CS, Gomes EB, Mattedi S, Soares CMF, Lima AS (2019) Pineapple crown delignification using low-cost ionic liquid based on ethanolamine and organic acids. Carbohydr Polym 206:302–308. https://doi.org/10.1016/j.carbpol.2018.10.112
Derman E, Abdulla R, Marbawi H, Sabullah MK (2018) Oil plam empy fruit bunches as a promising feedstock for bioethanol production in Malaysia. Renew Energy 129:285–298. https://doi.org/10.1016/j.renene.2018.06.003
Dhande DY, Nighot DV, Sinaga N, Dahe KB (2021) Extraction of bioethanol from waste pomegranate fruits as a potential feedstock and its blending effects on a performance of a single cylinder SI engine. Renew Sustain Energy Rev 149:111349. https://doi.org/10.1016/j.rser.2021.111349
Dominik, Rutz, and Janssen Rainer . 2007. Biofuel technology handbook. WIP Renerable Energies.
Dong C, Chen J, Guan R, Li X, Xin Y (2018) Dual-frequency ultrasound combined with alkali pretreatment of corn stalk for enhanced biogas production. Renew Energy 127:444–451. https://doi.org/10.1006/j.renene.2018.03.088
Fonseca BG, Mateo S, Moya AJ, Roberto IC (2018) Biotreatment optimization of rice straw hydrolyzates for ethanolic fermentation with Scheffersomyces stipitis. Biomass Bioenerg 112:19–28. https://doi.org/10.1016/j.biombioe.2018.02.003
Fu J, Du J, Lin G, Jiang D (2021) Analysis of yield potential and regional distribution for bioethanol in China. Energies 14(15):4554. https://doi.org/10.3390/en14154554
Galbe M, Zacchi G (2007) Pretreatment of lignocellulosic materials for efficient bioethanol Production. Advances in biochemical engineering/biotechnology. Springer, Berlin, pp 41–65
Galbe M, Zacchi G (2012) Pretreatment: the key to efficient utilization of lignocellulosic materials. Biomass Bioenerg 46:70–78. https://doi.org/10.1016/j.biombioe.2012.03.026
Hadeel A, Hossain ABMS, Latifa K, Naqeb HAL, Abear J, Norah A (2011) Bioethanol fuel production from rambutan fruit biomass as reducing agent of global warming and greenhouse gases. Afr J Biotech 10(50):10157–10165. https://doi.org/10.5897/AJB11.790
Hamelinck CN, van Hooijdonk G, Faaij APC (2005) Ethanol from lignocellulosic biomass: techno-economnic performance in short-, middle- and long-term. Biomass Bioenergy 28(4):384–410. https://doi.org/10.1016/j.biombioe.2004.09.002
Harinikumar KM, Kudahettige-Nilsson RL, Devadas A, Holmgren M, Sellstedt A (2020) Bioethanol production from four abundant Indian agricultural wastes. Biofuels 11(5):607–613. https://doi.org/10.1080/17597269.2017.1387744
Hernandez-Beltran JU, IO Hernandez-De-Lira, MM Cruz-Santos, A Saucedo-Luevanos, F Harnandez-Teran, and N Balagurusamy. 2019. "Insight in to pretretment Method of Lignocellulosic Biomass to increase Biogas Yeild: Current State, Challenges, Oppertunities." Applied Science (MDPI) 9 (18). doi: https://doi.org/10.3390/app9183721 .
Hiben G, Yacob Y (2013) "Long-term bioethanol shift and transport fuel substitution in Ethiopia. KTH School of Industrial Engineering and Management, Energy Technology EGI-2013-ECS, Division of Energy and Climate Studies, Stockholm
Hilares RT, Kamoei DV, Ahmed MA, da Silva SS, Han J-I, Cesar dos Santos J (2018) A new approach for bioethanol production from sugarcane bagasse using hydrodynamic cavitation assisted-pretreatment and column reactors. Ultrasonics Sonochem 43:219–226. https://doi.org/10.1016/j.ultsonch.2018.01.016
Himmel ME, Adney WS, Baker JO, Elander R, McMillan JD, Nieves RA, Sheehan JJ, Thomas SR, Vinzant TB, Zhang M (1997) Advanced bioethanol production technologies: a perspective. Renew Sustain Energy Rev 666:2–45. https://doi.org/10.1021/bk-1997-0666.ch001
Huang C, Xinxing Wu, Huang Y, Lai C, Li X, Youg Q (2016) Prewashing enhances the liquid hot water pretreatment efficiency of waste wheat straw with high free ash content. Biores Technol 219:583–588. https://doi.org/10.1016/j.biortech.2016.08.018
Imman S, Arnthong J, Burapatana V, Champreda V, Laosiripojana N (2015) Influence of alkaline catalyst addition on compressed liquid hot water pretreatment of rice straw. Chem Eng J 278:85–91. https://doi.org/10.1016/j.cej.2014.12.032
Ingrao C, Matarazzo A, Gorjian S, Adamczyk J, Failla S, Primerano P, Huisingh D (2021) Wheat-straw derived bioethanol production: a review of life cycle assessments. Sci Total Environ 781:146. https://doi.org/10.1016/j.scitotenv.2021.146751
Isikgor FH, Remzi Becer C (2015) Lignocellulose biomass: a sustainable platfrom for the production of biobased chemicals and polymers. R Soc Chem 6:4497–4559. https://doi.org/10.1039/C5PYU00263J
Izmirlioglu G, Demirci A (2016) Improved simultaneous saccharification and fermentation of bioethanol from industrial potato waste with co-culture of Aspergillus niger and Saccharomyces cerevisiae by medium optimization. Fuel 185:684–691. https://doi.org/10.1016/j.fuel.2016.08.035
Jacobus AP, Gross J, Evans JH, Ceccato-Antonini SR, Gombert AK (2021) Saccharomyces cerevisiae strains used industrially for bioethanol production. Essays Biochem 65(2):147–161. https://doi.org/10.1042/EBC20200160
Jaing D, Ge X, Zhang Q, Li Y (2016) omparison of liquid hot water and alkaline pretreatments of giant reed for improved enzymatic digestibility and biogas energy production. Biores Technol 216:60–68. https://doi.org/10.1016/j.biortech.2016.05.025
Jeppsson H, Yu S, Hahn-Hagerdal B (1996) Xylulose and glucose fermentation by saccharomyces cerevisiae in chemostat culture. Appl Environ Microbiol 62(5):1705. https://doi.org/10.1128/aem.62.5.1705-1709.1996
Jin M, Slininger JP, Dien BS, Waghmode S, Moser BR, Orjuela A, de Costa-Sousa L, Balan V (2015) Microbial lipid-based lignocellulosic biorefinery: feasibility and challenges. Cellpress 33:43–54. https://doi.org/10.1016/j.tibtech.2014.11.005
Jinkun Xu, Bingchuan L, Huijie H, Jingping Hu (2017) Pretreatment of eucalyptus with recycled ionic liquids for low-cost biorefinery. Bioresour Technol 234:406–416. https://doi.org/10.1016/j.biotech.2017.03.081
Jonathan G (2008) Transgenics are imperative for biofuel crops. Plant Sci 174(3):246–263. https://doi.org/10.1016/j.plantsci.2007.11.009
Juunchen Lu, Irfan M, Lin F (2012) Bioconversion of agricultural waste to ethanol : apotential source of energy. Arch Sci 65:626–642
Kandasamy M, Hamawand I, Bowtell L, Seneweera S, Chakrabarty S, Yusaf T, Shakoor Z, Algayyim S, Eberhard F (2017) Investigation of ethanol production potential from lignocellulosic material without enzymatic hydrolysis using the ultrasound technique. Energies 10(1):62. https://doi.org/10.3390/en10010062
Kang KE, Chung DP, Kim Y, Chung BW, Choi GW (2015) High-titer ethanol production from simultaneous saccharification and fermentation using a continuous feeding system. Fuel 145:18–24. https://doi.org/10.1016/j.fuel.2014.12.052
Karimi S, Karri RR, Yaraki MT, Koduru JR (2021) Processes and separation technologies for the production of fuel-grade bioethanol: a review. Environ Chem Lett 19:2873–2890. https://doi.org/10.1007/s10311-021-01208-9
Katsimpouras C, Zacharopoulou M, Matsakas L, Rova U, Christakopoulos P, Topakas E (2017) Sequential high gravity ethanol fermentation and anaerobic digestion of steam explosion and organosolv pretreated corn stover. Biores Technol 244:1129–1136. https://doi.org/10.1016/j.biortech.2017.08.112
Kaya AI, Karaosmanoglu F (2022) Life cycle assessment of safflower and sugar beet molasses-based biofuels. Renew Energy 201:1127–1138. https://doi.org/10.1016/j.renene.2022.11.041
Khatri S, Wu S, Kizito S, Zhang W, Li J, Dong R (2015) Synergistic effect of alkaline pretreatment and Fe dosing on batch anaerobic digestion of maize straw. Appl Energy 158:55–64. https://doi.org/10.1016/j.apenergy.2015.08.045
Khramtsov N, McDade L, Amerik A, Esther Yu, Divatia K, Tikhonov A, Minto M et al (2011) Industrial yeast strain engineered to ferment ethanol from lignocellulosic biomass. Bioresour Technol 102(17):8310–8313. https://doi.org/10.1016/j.biortech.2011.05.075
Kim SR, Lee K-S, Choi J-H, Ha S-J, Kweon D-H, Seo J-H, Jin Y-S (2010) Repeated-batch fermentations of xylose and glucose–xylose mixtures using a respiration-deficient Saccharomyces cerevisiae engineered for xylose metabolism. J Biotechnol 150(3):404–407. https://doi.org/10.1016/j.jbiotec.2010.09.962
Kim JS, Lee YY, Kim TH (2016a) A review on alkaline pretreatment technology for bioconversion of lignocellulosic biomass. Biores Technol 199:42–48. https://doi.org/10.1016/j.biortech.2015.08.085
Kim SM, Dien BS, Tumbleson ME, Rausch KD, Singh V (2016b) Improvement of sugar yields from corn stover using sequential hot water pretreatment and disk milling. Biores Technol 216:706–713. https://doi.org/10.1016/j.biortech.2016.06.003
Krishna SH, Reddy TJ, Chowdary GV (2001) Simultaneous saccharification and fermentation of lignocellulosic wastes to ethanol using a thermotolerant yeast. Bioresour Technol 77(2):193–196. https://doi.org/10.1016/S0960-8524(00)00151-6
Kumar AK, Sharma S (2017) Recent updates on different methods of pretreatment of lignocellulosic feedstocks: a review. Bioresour Bioprocess 4(1):7. https://doi.org/10.1186/s40643-017-0137-9
Kumari D, Singh R (2018) Pretreatment of lignicellulosic wastes for biofuels production: a critical review. Renew Sustain Energy Rev 90:877–891. https://doi.org/10.1016/j.rser.2018.03.111
Lachenmeier DW, Godelmann R, Steiner M, Anasy B, Weigel J, Krieg G (2010) Rapid and mobile determination of alcoholic strength in wine, beer and spirits using a flow-through infrared sensor. Chem Cent J 4:1–10. https://doi.org/10.1186/1752-153X-4-5
Li H, Li S (2020) Optimization of continuous solid-state distillation process for cost-effective bioethanol production. Energies 13(4):854. https://doi.org/10.3390/en13040854x
Li H, Kim NJ, Jiang M, Kang JW, Chang HN (2009) Simultaneous saccharification and fermentation of lignocellulosic residues pretreated with phosphoric acid–acetone for bioethanol production. Bioresour Techno 100(13):3245–3251. https://doi.org/10.1016/j.biortech.2009.01.021
Li M, Luo N, Yi Lu (2017) Biomass energy technological paradigm (BETP) trenda in this sector. Sustainability (MDPI) 9:1–28. https://doi.org/10.3390/su9040567
Lin Y, Tanaka S (2006) Ethanol fermentation from biomass resources: current state and prospects. Appl Microbiol Biotechnol 69:627–642. https://doi.org/10.1007/s00253-005-0229-x
Lin TH, Guo GL, Hwang WS, Huang SL (2016) The addition of hydrolyzed rice straw in xylose fermentation by Pichia stipitis to increase bioethanol production at the pilot-scale. Biomass Bioenerg 91:204–209. https://doi.org/10.1016/j.biombioe.2016.05.012
Liu R, Shen F (2008) Impacts of main factors on bioethanol fermentation from stalk juice of sweet sorghum by immobilized Saccharomyces cerevisiae (CICC 1308). Biores Technol 99(4):847–854. https://doi.org/10.1016/j.biortech.2007.01.009
Liu Y, Tang Y, Gao H, Zhang W, Jiang Y, Xin F, Jiang M (2021) Challenges and future perspectives of promising biotechnologies for lignocellulosic biorefinery. Molecules 26(17):5411. https://doi.org/10.3390/molecules26175411
Loow Y-L, Ta Yeong Wu, Jahim JM, Mohammad AW, Teoh WH (2016) Typical conversion of lignocellulosic biomass into reducing sugars using dilute acid hydrolysis and alkaline pretreatment. Cellulose 23(3):1491–1520. https://doi.org/10.1007/s10570-016-0936-8
Luo M, Dong T, Shen F, Hu J, Hu Y (2019) A comparative investigation of H2O2-involved pretreatments on lignocellulosic biomass for enzymatic hydrolysis. Biomass Convers Biorefin 9:321–331. https://doi.org/10.1007/s13399-018-0364-0
Machineni L (2020) Lignocellulose biofuel production: review of alternatives. Biomass Conver Biorefin 10:779–791. https://doi.org/10.1007/s13399-019-00445-x
Manikandan S, Vickram S, Sirohi R, Subbaiya R, Krishnan RY, Karmegam N, Sumathijones C et al (2023) Critical review of biochemical pathways to transformation of waste and biomass into bioenergy. Bioresour Technol 372:128679. https://doi.org/10.1016/j.biortech.2023.128679
Mardawati E, Febrianti EA, Fitriana HN, Yuliana T, Putriana NA, Suhartini S, Kasbawati (2022) An intregrated process for the xylitol and ethanol production from oil plam empty fruit bunch using debaryomyces hansenii and Saccharomyces cerevisiae. Microorganisms (MDPI) 10:2–11. https://doi.org/10.3390/microoganisms10102036
Martines-Patino JC, Lu-Chau TA, Gullon B, Ruiz E, Inmaculada R, Castro E, Lema JM (2018) Application of a combined fungal and diluted acid pretreatment on olive tree biomass. Ind Crops Prod 121:10–17. https://doi.org/10.1016/j.indcrop.2018.04.078
Maurya DP, A Singla, and S Negi. 2015. "An overview of key pretreatment processes for biological conversion of lignocellulosic biomass to bioethanol." biotech 5(5): 597–609. https://doi.org/10.1007/s13205-015-0279-4.
Mazhad MM, Ramos LP, Paszner L, Saddler JN (1995) Structural constraints affecting the initial enzymatic hydrolysis of recycled paper. Enzym Microb Technol 17(1):68–74. https://doi.org/10.1016/0141-0229(94)00057-X
Melendez JR, Matyas B, Hena S, Lowy DA, El Salous A (2022) Perspectives in the production of bioethanol: a review of sustainable methods, technologies, and bioprocesses. Renew Sustain Energy Rev 160:112260. https://doi.org/10.1016/j.rser.2022.112260
Merino O, Almazan V, Martiner-Palou R, Aburto J (2017) Screening of ionic liquids for pretreatment of taiwan grass in Q-Tube minireactors for improving bioethanol production. Waste Biomass Valoriz 8:733–742. https://doi.org/10.1007/S12649-016-9612-3
Mikulski D, Klosowski G, Menka A, Koim Puchowska B (2019) Microwave-assisted pretreatment of maize distillery stillage with the use of dilute sulfuric acid in the production of cellulosic ethanol. Biores Technol 278:318–328. https://doi.org/10.1016/j.biortech.2019.01.068
Mohammad JN, Keikhosro K, Morteza S (2018) Improvment of ethanol and biogas production from sugarcane bagasse using sodium alkaline pretreatments. J Environ Manag 226:329–339. https://doi.org/10.1016/j.jenvman.2018.08.058
Molaverdi M, Karimi K, Mirmohamadsadeghi S (2019) Improvement of dry simultaneous saccharification and fermentation of rice straw to high concentration ethanol by sodium carbonate pretreatment. Energy 167(15):654–660. https://doi.org/10.1016/j.energy.2018.11.017
Monschein M, Nidetzky B (2016) Effect of pretreatment severity in continuous steam explosion on enzymatic conversion of wheat straw: evidence from kinetic analysis of hydrolysis time courses. Biores Technol 200:287–296. https://doi.org/10.1016/j.biortech.2015.10.020
Morshabul H, Abedin MZ, Amin MB, Nekmahmud M, Olah J (2023) Sustainable biofuel economy: amapping through bibliometric research. J Environ Manag 336:11764. https://doi.org/10.1016/j.envman.2023.117644
Mukherjee A, Mandal T, Ganguly A, Chatterjee PK (2016) Lignin degradation in the production of bioethanol–a review. Chembioeng Rev 3(2):89–96. https://doi.org/10.1002/cben.201500016
Mustafa MA, Poulsen GT, Kuichuan S (2016) Fungal pretreatment of rice straw with Pleurotus ostreatus and Trichoderma reesei to enhance methane production under solid-state anaerobic digestion. Appl Energy 108:661–671. https://doi.org/10.1016/j.apenergy.2016.07.135
Niklitschek T, Salazar O, Carmona R, Garcia A, Lienqueo ME (2010) Comparison of SHF and SSF processes from forest residues pretrated with ionic liquid to obtain bioethanol. J Biotechnol 150:181–181. https://doi.org/10.1016/j.jbiotec.2010.08.472
Noelia PR, Bernet GD, Dominguez MJ (2017) Extrusion and enzymatic hydrolysis as preteatment on corn cob for biogas production. Renew Energy 107:597–603. https://doi.org/10.1016/j.renene.2017.02.030f
Nosratpour MJ, Karimi K, Sadeghi M (2018) Improvement of ethanol and biogas production from sugarcane bagasse using sodium alkaline pretreatments. J Environ Manag 226:329–339. https://doi.org/10.1016/j.jenvman.2018.08.058
Ohgren K, Bengtsson O, Gorwa-Grauslunda MF, Galbe M, Hagerdal BH, Zacch G (2006) Simultaneous saccharification and co-fermentation of glucose and xylose in steam-pretreated corn stover at high fiber content with Saccharomyces cerevisiae TMB3400. J Biotechnol 126(4):488–498. https://doi.org/10.1016/j.jbiotec.2006.05.001
Oliver JD, Gaborieau M, Castignolles P (2014) Ethanol determination using pressure mobilization and free solution capillary electrophoresis by photo-oxidation assisted ultraviolet detection. J Chromatogr A 1348(27):150–157. https://doi.org/10.1016/j.chroma.2014.04.076
Olofsson K, Wiman M, Liden G (2010) Controlled feeding of cellulases improves conversion of xylose in simultaneous saccharification and co-fermentation for bioethanol production. J Biotechnol 145(2):168–175. https://doi.org/10.1016/j.jbiotec.2009.11.001
Olugbenga AG (2023) Cost determination of using bioethanol to improve properties of Nigerian gasoline. Case Stud Chem Environ Eng 7:100358. https://doi.org/10.1016/j.cscee.2023.100358
Ornaghi HL Jr, Ornaghi FG, Neves RM, Monticeli F, Bianchi O (2020) Mechanisms involved in thermal degradation of lignocellulosic fibers: a survey based on chemical composition. Cellulose 27:4949–4961. https://doi.org/10.1007/s10570-020-03132-7
Orozco RS, Hernandez PB, Morales GR, Nunez FU, Villafuerte JO, Lugo VL, Ramirez NF, Diaz CEB, Vazquez PC (2014) Characterization of lignocellulosic fruit waste as an alternative feedstock for bioethanol production. Bioresources 9(2):1873–1885
Panagiotis T, Panagiotis KG, Angelidaki I (2018) Mechanical pretreatment for increased biogas production from lignecellulose biomass; predicting the methane yield from structural plant components. Waste Manag 78:903–910. https://doi.org/10.1016/j.wasman.2018.07.017
Pattanakittivorakul S, Tsuzuno T, Kosaka T, Murata M, Kanesaki Y, Yoshikawa H, Limtong S, Yamada M (2022) Evolutionary adaptation by repetitive long-term cultivation with gradual increase in temperature for acquiring multi-stress tolerance and high ethanol productivity in Kluyveromyces marxianus DMKU 3–1042. Microorganisms 10(4):798. https://doi.org/10.3390/microorganisms10040798
Paulova L, Patakova P, Branska B, Rychtera M, Melzoch K (2015) Lignocellulosic ethanol: technology design and its impact on process efficiency. Biotechnol Adv 33(6):1091–1107. https://doi.org/10.1016/j.biotechadv.2014.12.002
Pejo ET, Oliva JM, Ballesteros M, Olsson L (2008) Comparison of SHF and SSF processes from steam-exploded wheat straw for ethanol production by xylose-fermenting and robust glucose-fermentation Saccharomyces cerevisiae strains. Biotechnol Bioeng 100(6):1122–1131. https://doi.org/10.1002/bit.2849
Pinal L, Cedeno M, Gutierrez H, Jacobs JA (1997) Fermentation parameters influencing higher alcohol production in the tequila process. Biotechnol Lett 19(1):45–47. https://doi.org/10.1023/A:1018362919846
Prasad S, Malav MK, Kumar S, Singh A, Pant D, Radhakrishnan S (2018) Enhancement of bio-ethanol production potential of wheat straw by reducing furfural and 5-hydroxymethylfurfural (HMF). Bioresour Technol Rep 4:50–56. https://doi.org/10.1016/j.biteb.2018.09.007
Rabbani M, Momen S, Akbarian-Saravi N, Farrokhi Asl H, Ghlinchi Z (2020) Optimal design for sustainable bioethanol supply chain considering the bioethanol production strategies: a case study. Comput Chem Eng 134:106720. https://doi.org/10.1016/j.compchemeng.2019.106720
Rana V, Eckard AD, Ahring BK (2014) Comparison of SHF and SSF of wet exploded corn stover and loblolly pine using in-house enzymes produced from T. reesei RUT C30 and A. saccharolyticus. J Korean Phys Soc 3(1):1–13. https://doi.org/10.1186/2193-1801-3-516
Rangel AOSS, Toth IV (2000) Enzymatic determination of ethanol and glycerol by flow injection parallel multi-site detection. Anal Chim Acta 416(2):205–210. https://doi.org/10.1016/S0003-2670(00)00905-3
Robak K, Balcerek M (2018) Review of second generation bioethanol production from residual biomass. Food Technol Biotechnol 56(2):174–187. https://doi.org/10.17113/ftb.56.02.18.5428
Roca C, Olsson L (2003) Increasing ethanol productivity during xylose fermentation by cell recycling of recombinant Saccharomyces cerevisiae. Appl Microbiol Biotechnol 60(5):560–563. https://doi.org/10.1007/s00253-002-1147-9
Rotariu L, Bala C, Magearu V (2003) New potentiometric microbial biosensor for ethanol determination in alcoholic beverages. Anal Chim Acta 513(1):119–123. https://doi.org/10.1016/j.aca.2003.12.048
Saini S, Sharma KK (2021) Fungal lignocellulolytic enzymes and lignocellulose: a critical review on their contribution to multiproduct biorefinery and global biofuel research. Int J Biol Macromol 193:2304–2319. https://doi.org/10.1016/j.ijbiomac.2021.11.063
Saini BL, Gaur NR, Sahoo NR, Naha BC, Baranwal A (2019) Assessment of meat quality defect genes in indigenous pigs of Bareilly region. Trop Anim Health Prod 51:1329–1335. https://doi.org/10.1007/s11250-018-01795-w
Saleh SM, Al-Azzawi AGS (2023) Optimizing bioethanol production for high octane bioethanol-gasoline. J Turk Chem Soc 10(2):475–486. https://doi.org/10.18596/jotcsa.1250955
Salehian P, Keikhosro K, Hamid Z, Azam J (2013) Improvement of biogas production from pine wood by alkali pretreatment. Fuel 106:484–489. https://doi.org/10.1016/j.fuel.2012.12.092
Sanchez S, Bravo V, Castro E, Moya AJ, Camacho F (2002) The fermentation of mixtures of D-glucose and D-xylose by Candida shehatae, Pichia stipitis or Pachysolen tannophilus to produce ethanol. J Chem Technol Biotechnol 77(6):641–648. https://doi.org/10.1002/jctb.622
Sanchez C, Santos S, Sanchez R, Lienemann CP, Todoli JL (2020) Profiling of organic compounds in bioethanol samples of different nature and the related fractions. Am Chem Soc 5(33):20912–20921. https://doi.org/10.1021/acsomega.0c02360
Satari B, Karimi K, Kumar R (2019) Cellulose solvent-based pretreatment for enhanced second-generation biofuel production: a review. Sustain Energy Fuels 3(1):11–62. https://doi.org/10.1039/C8SE00287H
Schwab C, Tveit AT, Schleper C, Urich T (2016) Gene expression of lactobacilli in murine forestomach biofilms. Microbl biotechnol 9(4):436–440. https://doi.org/10.1111/1751-7915.12126
Setyo WC, Setiady NI, Masuku M, Hamzah A, Fedori I, Maymuchar, Nugroho YS, Bambang S (2020) The performance of a spark ignition engine using 92 RON gasoline with varying blends of bioethanol (E40, E50, E60) measured using a dynamometer test. Int J Technol 11(7):1380–1387
Shah AT, Ullah R (2019) Pretreatment of wheat straw with ligninoytic fungi for increased biogas productivity. Int J Environ Sci Technol 16:7497–7508. https://doi.org/10.1007/s13762.019-02277-8
Shah KR, Vyas R, Patel G (2019) Bioethanol production from pulp of fruits. Biotechnol Commun 12:464–471. https://doi.org/10.21786/bbrc/12.2/32
Sharma S, Basu S, Shetti NP, Aminabhavi TM (2020) Waste-to-energy nexus for circular economy and environment protection: Recent trends in hydrogen energy. Sci Total Environ 713:1–13. https://doi.org/10.1016/j.scitotenv.2020.136633
Shih CJ, Smith EA (2009) Determination of glucose and ethanol after enzymatic hydrolysis and fermentation of biomass using Raman spectroscopy. Anal Chim Acta 653(2):200–206. https://doi.org/10.1016/j.aca.2009.09.012
Sindhu R, Kuttiraja M, Binod P, Sukumaran RK, Ashok P (2014) Bioethanol production from dilute acid pretreated Indian bamboo variety (Dendrocalamus sp.) by separate hydrolysis and fermentation. Ind Crops Prod 52:169–176. https://doi.org/10.1016/j.indcrop.2013.10.021
Singh R, Shukla A, Tiwari S, Srivastava M (2014) A review on delignification of lignocellulosic biomass for enhancement of ethanol production potential. Renew Sustain Energy Rev 32:713–728. https://doi.org/10.1016/j.rser.2014.01.051
Singh J, Suhag M, Dhaka A (2015) Augmented digestion of lignocellulose by steam explosion, acid and alkaline pretreatment methods: a review. Carbohyd Polym 117:624–631. https://doi.org/10.1016/j.carbpol.2014.10.012
Smuga K, Kazimiera Z, Daria PS (2016) Influence of the crystalline structure of cellulose on the production of ethanol from lignocellulose biomass. Int Agrophys 30:83–88. https://doi.org/10.1515/intag-2015-0072
Solarte-Toro JC, Romero-Garcia JM, Martinez-Patino JC, Ruiz-Ramos E, Castro-Galiano E, Cardona-Alzate CA (2019) Acid pretreatment of lignocellulosic biomass for energy vectors production: a review focused on operational conditions and techno-economic assessment for bioethanol production. Renew Sustain Energy Rev 107:587–601. https://doi.org/10.1016/j.rser.2019.02.024
Song Z, Gaihe Y, Xiaofeng L, Zhiying Y, Yuexiang Y, Liao Y (2014) Comparison of seven chemical pretretment of corn straw for improving methane yeild by anaerobic digestion. PLOS ONE 9(6):456. https://doi.org/10.1371/journal.pone.0101617
Sreemahadevan S, Roychoudhury PK, Thankamani V, Ahammad SZ (2018) Biological pretreatment of rice straw using an alkalophilic fungus MVI.2011 for enhanced enzymatic hydrolysis yield. Sustain Energy Technol Assess 30:304–313. https://doi.org/10.1016/j.seta.2018.10.015
Su T, Zhao D, Khodadadi M, Len C (2020) Lignocellulosic biomass for bioethanol: recent advances, technology trends, and barriers to industrial development. Current Opin Green Sustain Chem 24:56–60. https://doi.org/10.1016/j.cogsc.2020.04.005
Tanaka K, Hilary ZD, Ishizaki A (1999) Investigation of the utility of pineapple juice and pineapple waste material as low-cost substrate for ethanol fermentation by Zymomonas mobilis. J Biosci Bioeng 87(5):642–646. https://doi.org/10.1016/S1389-1723(99)80128-5
Tavva SSMD, Deshpande A, Durbha SR, Palakollu VAR, Goparaju AU, Yechuri VR, Muktinutalapati VR, Muktinutalapati VSR (2016) Bioethanol production through separate hydrolysis and fermentation of Parthenium hysterophorus biomass. Renew Energy 86:1317–1323. https://doi.org/10.1016/j.renene.2015.09.074
Tenkolu GA, Kuffi KD, Gindaba GT (2022) Optimization of fermentation condition in bioethanol production from waste potato and product characterization. Biomass Convers Biorefin 45:1–19. https://doi.org/10.1007/s13399-022-02974-4
Thomas HL, Arnoult S, Hulmel MB, Carrere H (2019) Methane production variability according to miscanthus genotype and alkaline pretreatments at high solid content. Bioenergy Res 12:335–337. https://doi.org/10.1007/s12155-018-9957-5
Torreiro MG, Lopez Abelairas M, Lu Chau TA, Lema JM (2016) Fungal pretreatment of agricultural residues for bioethanol production. Ind Crops Prod 89:486–492. https://doi.org/10.1016/j.indcrop.2016.05.036
Tovar FG, Celis LB, Flores ER, Mondragon FA (2012) Chemical and enzymatic sequential pretreatment of oat straw for methane production. Biores Technol 116:372–378. https://doi.org/10.1016/j.biortech.2012.03.109
Trejo M, Bhuyar P, Unpaprom Y, Dussadee N, Ramaraj R (2022) Advancement of fermentable sugars from fresh elephant ear plant weed for efficient bioethanol production. Environ Dev Sustain 24(5):7377–7387. https://doi.org/10.1007/s10668-021-01753-x
Triwahyuni E, Muryanto YS, Abimanyu H (2015) The effect of substrate loading on simultaneous saccharification and fermentation process for bioethanol production from oil palm empty fruit bunches. Energy Procedia 68:138–146. https://doi.org/10.1016/j.egypro.2015.03.242
Tsegaye B, Balomajumder C, Roy P (2019) Optimization of microwave and NaOH pretreatments of wheat straw for enhancing biofuel yield. Energy Convers Manag 186:82–92. https://doi.org/10.1016/j.enconman.2019.02.049
Ullah K, Sharma VK, Ahmad M, Lv P, Krahi J, Wang Z, Sofia S (2017) The insight views of advanced technologies and its application in bio-origin fuel synthesis from lignocellulose biomasse waste, a review. Renew Sustain Energy Rev 82:1364–0321. https://doi.org/10.1016/j.rser.2017.074
Usmani Z, Sharma M, Gupta P, Karpichev Y, Gathergood N, Bhat R, Gupta VK (2020) Ionic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion. Biores Technol 304:123003. https://doi.org/10.1016/j.biortech.2020.123003
Vallet C, Said R, Rabiller C, Martin ML (1996) Natural Abundance isotopic fractionation in the fermentation reaction: influence of the nature of the yeast. Bioorg Chem 24(4):319–330. https://doi.org/10.1006/bioo.1996.0028
Vergara P, Ladero M, Garcia-Ochoa F, Villlar JC (2018) Pre-treatment of corn stover, Cynara cardunculus L. stems and wheat straw by ethanol-water and diluted sulfuric acid: comparison under different energy input conditions. Bioresour. Technol. 270:449–456. https://doi.org/10.1016/j.bioetech.2018.09.058
Walker GM (2010) Bioethanol: science and technology of fuel alcohol. Ventus Publishing ApS, Telluride
Wang ML, Choong YM, Su NW, Lee MS (2003) A rapid method for determination of ethanol in alcoholic beverages using capillary gas chromatography. J Food Drug Anal 11(2):133–140. https://doi.org/10.38212/2224-6614.2710
Wayman M, Parekh SR (1990) Biotchnology of biomass consevation. Open University Press, Maidenhead
Wu X, Zhang J, Erni Xu, Liu Y, Cheng Y, Addy M, Zhou W, Griffith R, Chen P, Ruan R (2016) Microbial hydrolysis and fermentation of rice straw for ethanol production. Fuel 180:679–686. https://doi.org/10.1016/j.fuel.2016.04.087
Xue SJ, Chi Z, Zhang Y, Li Y-F, Liu G-L, Jiang H, Hu Z, Chi Z-M, Chi ZM (2018) Fatty acids from oleaginous yeasts and yeast-like fungi and their potential applications. Crit Rev Biotechnol 38:1049. https://doi.org/10.1080/0738855102018.1428167
Yang H, Shi Z, Gaofeng Xu, Qin Y, Deng J, Yang J (2019) Bioethanol production from bamboo with alkali-catalyzed liquid hot water pretreatment. Biores Technol 274:261–266. https://doi.org/10.1016/j.biortech.2018.11.088
Yang P, Jiang S, Shuhua Lu, Jiang S, Jiang S, Deng Y, Jiuling Lu, Wang Hu, Zhou Y (2022) Ethanol yield improvement in Saccharomyces cerevisiae GPD2 Delta FPS1 Delta ADH2 Delta DLD3 Delta mutant and molecular mechanism exploration based on the metabolic flux and transcriptomics approaches. Microb Cell Fact 21(1):1–14. https://doi.org/10.1186/s12934-022-01885-3
Ye C, Mark SA, Yongming Z, Jason H, Hui Xu (2013) Understanding of alkaline pretreatment parameters for corn stover enzymatic saccharification. Biotechnol Biofuels 6(8):1–10. https://doi.org/10.1186/1754-6834-6-8
Yuan X, Ma L, Wan B, Zhou D, Kuang M, Yang W, Cui Z (2016) Enhancing anaeribic digestion of cotton satalk by pretretment with a microbial consortium (MC1). Biores Technol 207:293–301. https://doi.org/10.1016/j.biotech.2016.02.037
Yuan Z, Wen Y, Li G (2018a) Production of bioethanol and value added compounds from wheat straw through combined alkaline/alkaline-peroxide pretreatment. Bioresour Technol 259:228–236. https://doi.org/10.1016/j.biortech.2018.03.044
Yuan Z, Wen Y, Kapu NS (2018b) Ethanol production from bamboo using mild alkaline pre-extraction followed by alkaline hydrogen peroxide pretreatment. Bioresour Technol 247:242–249. https://doi.org/10.1016/j.biortech.2017.09.080
Yuan Z, Wen Y, Li G (2018c) Production of bioethanol and value added compounds from wheat straw through combined alkaline/alkaline-peroxide pretreatment. Biores Technol 259:228–236. https://doi.org/10.1016/j.biortech.2018.03.044
Yuangsaar N, Yongmanitchai W, Yamada M, Limtong S, van Leeuwenhoek A (2013) Selection and characterization of a newly isolated thermotolerant Pichia kudriavzevii strain for ethanol production at high temperature from cassava starch hydrolysate. Antonie Leeuwenhoek 103:577–588. https://doi.org/10.1007/s10482-012-9842-8
Zabed H, Sahu JN, Boyce AN, Faruq G (2016) Fuel ethanol production from lignocellulose biomass: an overview on feedstocks and technological approaches. Renew Sustain Energy Rev 66:751–774. https://doi.org/10.1016/j.rser.2016.08.038
Zabed HM, Akter S, Yun J, Zhang G, Awad FN, Qi X, Sahu JN (2019) Recent advances in biological pretreatment of microalgae and lignocellulosic biomass for biofuel production. Renew Sustain Energy Rev 105:105–128. https://doi.org/10.1016/j.rser.2019.01.048
Zerva A, Savvides AL, Katsifas EA, Karagouni AD, Hatzinikolaou DG (2014) Evaluation of Paecilomyces variotii potential in bioethanol production from lignocellulose through consolidated bioprocessing. Biores Technol 162:249–299. https://doi.org/10.1016/j.biortech.2014.03.137
Zhang H, Zhang P, Ye J, Yan Wu, Liu J, Fang W, Dong Xu, Wang B, Yan Li, Zeng G (2018) Comparison of various pretreatments for ethanol production enhancement from solid residue after rumen fluid digestion of rice straw. Biores Technol 247:147–156. https://doi.org/10.1016/j.biortech.2017.09.065
Zhao X, Cheng K, Liu D (2009) Organosolv pretreatment of lignocellulosic biomass for enzymatic hydrolysis. Appl Microbiol Biotechnol 82(5):815. https://doi.org/10.1007/s00253-009-1883-1
Zhao C, Qiao X, Shao Q, Hassan M, Ma Z (2020) Evolution of the lignin chemical structure during the bioethanol production process and its inhibition to enzymatic hydrolysis. Am Chem Soc 34(5):5938–5947. https://doi.org/10.1021/acs.energyfuels.0c00293
Acknowledgements
The authors are thankful to the Department of Environment Science and the Department of Chemistry, Gujarat University for providing access to e-sources facilities.
Funding
One of the authors, Shreya J Chauhan, acknowledges the support of the Education Department, Government of Gujarat, under the SHODH - Scheme of Developing High-Quality Research, reference number 2022013896. Additionally, Bimalkumar Patel is grateful for the support from the DST Inspire Fellowship, with grant ID 220066.
Author information
Authors and Affiliations
Contributions
Shreya J Chauhan significantly contributed through formal analysis, investigation, methodology, and authoring the initial draft. Bimalkumar Patel provided essential conceptual input and resources. Bhargav Devliya created the graphical abstract and provided other technical support. Dr. Hitesh D Patel and Dr. Hitesh Solanki guided and supervised with technical assistance and access to library resources.
Corresponding author
Ethics declarations
Conflict of interest
The authors declared that there are no known competing financial interests or personal relationships that could influence the work reported in this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The original online version of this article was revised: Author contribution and funding section are updated.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chauhan, S.J., Patel, B., Devliya, B. et al. Recent advancement in production of bioethanol from waste biomass: a review. Clean Techn Environ Policy (2023). https://doi.org/10.1007/s10098-023-02710-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10098-023-02710-0