Abstract
This paper proposes a new method for fault detection and isolation of a large-scale system by the bond graph (BG) model and the principal component analysis (PCA) technique in a decentralized architecture. The proposed method is entitled the BG-PCA technique. The main objective is to address the problem of monitoring large-scale system components by fault detection and isolation (FDI) methods. In the modeling framework, the BG model is presented by exploiting its structural and causal properties and the diagnostic bond graph (DBG). In measurement noise and perturbation conditions, the probability density function takes place to generate a clear decision procedure to detect the operating mode. In our approach, we firstly generate the structured residues. Furthermore, with a decentralized architecture, we can locate in what subsystem a fault is first detected. Finally, for isolation, the generation of the structured residues method from PCA is exploited to ensure localization. To validate the suggested BG-PCA algorithm, simulations are computed on a three-tank system to show the efficiency of the proposed FDI method, and satisfactory results are found.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Leonhardt S, Ayoubi M (1997) Methods of fault diagnosis. Control Eng Pract 5(5):683–692
Staroswiecki M (2000) Quantitative and qualitative models for fault detection and isolation. Control Eng Pract 14(3):301–325
Biswas G, Cordier MO, Lunze J, Trave-Massuyes L, Staroswiecki M (2004) Diagnosis of complex systems: Bridging the methodologies of the FDI and DX communities. IEEE Trans Syst Man Cybern B Cybern 34 (5):2159–2162
Zhong M, Zhang L, Ding S, Zhou D (2017) A probabilistic approach to robust fault detection for a class of nonlinear systems. IEEE Trans Ind Electron 64(5):3930–3939
Ferdowsi H, Jagannathan S (2017) Decentralized fault tolerant control of a class of nonlinear interconnected systems. IFAC Proceedings 15(2):527–536
Li W, Gui W, Xie Y, Ding S (2009) Decentralized Fault Detection System Design For Large-scale Interconnected System. IFAC Proceedings 42(8):816–821
Boem F, Ferrari RMG, Parisini T (2011) Distributed fault detection and isolation of continuous-time non-linear systems. Eur J Control 17(5-6):603–620
Reppa V, Polycarpou MM, Panayiotou CG (2015) Decentralized isolation of multiple sensor faults in large-scale interconnected nonlinear systems. IEEE Trans Autom Control 60 (6):1582– 1596
Arrichiello F, Marino A, Pierri F (2015) Observer-based decentralized fault detection and isolation strategy for networked multirobot systems. IEEE Trans Control Syst Technol 23 (4):1465– 1476
Odendaal HM, Jones T (2014) Actuator fault detection and isolation: an optimised parity space approach. Control Eng Pract 26:222–232
Taouali O, Elaissi I, Messaoud H (2012) Online identification of nonlinear system using reduced kernel principal component analysis. Neural Comput & Applic 21(1):161–169
Mulumba T, Afshari A, Yan K, Shen W, Norford LK (2015) Robust model-based fault diagnosis for air handling units. Energy Build 86(1):698–707
Ould Bouamama B, Biswas G, Loureiro R, Merzouki R (2014) Graphical methods for diagnosis of dynamic systems. Annu Rev Control 38(2):199–219
Mojallal A, Lotfifard S (2017) Multi-physics graphical model based fault detection and isolation in wind turbines. IEEE transactions on smart grid
Samantaray AK, Ould Bouamama B (2008) Model-based process supervision: a bond graph approach. Springer Science & Business Media
Biswas G, Simon G, Mahadevan N, Narasimhan S, Ramirez J, Karsai G (2003) A robust method for hybrid diagnosis of complex systems. IFAC Proceedings 36(5):1023–1028
Ould Bouamama B, Medjaher K, Samantaray AK, Staroswiecki M (2006) Supervision of an industrial steam generator. Part I: Bond graph modelling. Control Eng Pract 14(1):71–83
Medjaher K, Zerhouni N (2013) Hybrid prognostic method applied to mechatronic systems. Int J Adv Manuf Technol 69(1-4):823–834
Samantaray AK, Medjaher K, Ould Bouamama B, Staroswiecki M, Dauphin-Tanguy G (2006) Diagnostic bond graphs for online fault detection and isolation. Simul Model Pract Theory 14(3):237–262
Gao Z, Cecati C, Ding SX (2015) A survey of fault diagnosis and fault-tolerant techniques—Part I: Fault diagnosis with model-based and signal-based approaches. IEEE Trans Ind Electron 62(6):3757–3767
Jha MS, Dauphin-Tanguy G, Ould Bouamama B (2016) Particle filter based hybrid prognostics for health monitoring of uncertain systems in bond graph framework. Mech Syst Signal Process 75(6):301–329
Yang S, Bian C, Li X, Tan L, Tang D (2018) Optimized fault diagnosis based on FMEA-style CBR and BN for embedded software system. Int J Adv Manuf Technol 94 (9-12):3441– 3453
Zaidi A, Ould Bouamama B, Tagina M (2012) Bayesian reliability models of Weibull systems: State of the art. Int J Appl Math Comput Sci 22(3):585–600
Gertlert J, Li W, Huang Y, McAvor T (1998) Isolation enhanced principal component analysis. IFAC Proceedings 31(10):185–190
Halligan GR, Jagannathan S (2011) PCA-Based fault isolation and prognosis with application to pump. Int J Adv Manuf Technol 55(5-8):699–707
Chaouch H, Najeh T, Nabli L (2017) Multi-variable process data compression and defect isolation using wavelet PCA and genetic algorithm. Int J Adv Manuf Technol 91(1-4):869–878
Marcondes Filho D, SantAnna AMO (2016) Principal component regression-based control charts for monitoring count data. Int J Adv Manuf Technol 85(5-8):1565–1574
Alcala CF, Qin SJ (2010) Reconstruction-based contribution for process monitoring with kernel principal component analysis. Ind Eng Chem Res 49(17):7849–7857
Guo W, Zhao H, Gao X, Kong L, Li Y (2018) An efficient representative for object recognition in structural health monitoring. Int J Adv Manuf Technol 94(9-12):3239–3250
Jaffel I, Taouali O, Harkat MF, Kong L, Messaoud H (2015) Online process monitoring using a new PCMD index. Int J Adv Manuf Technol 80(5-8):947–957
Gertler J, Li W, Huang Y, McAvoy T (1999) Isolation enhanced principal component analysis. AIChE Journal 45(2):323–334
Zhang Z, Wang Y, Wang K (2013) Intelligent fault diagnosis and prognosis approach for rotating machinery integrating wavelet transform, principal component analysis, and artificial neural networks. Int J Adv Manuf Technol 68 (1-4):763– 773
Touati Y, Merzouki R, Ould Bouamama B (2012) Robust diagnosis to measurement uncertainties using bond graph approach: Application to intelligent autonomous vehicle. Mechatronics 22(8):1148–1160
Playtner H (1961) Analysis and design of engineering systems. MIT, Cambridge
Karnopp DC, Margolis DL, Rosenberg RC (1990) System dynamics: a unified approach
Breedveld PC (1984) Essential gyrators and equivalence rules for 3-port function structures. J Frankl Inst 318(2):77–89
Bouallegue W, Bouslama S, Tagina M (2017) Robust fault detection and isolation in bond graph modelled processes with Bayesian networks. Int J Comput Appl Technol 55(1):46–54
Dhouibi H, Bochra M, Messaoud H, Simeu-Abazi Z (2014) Diagnosis approach using bond graph and timed automata. MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation
Ould Bouamama B (2003) Bond graph approach as analysis tool in thermofluid model library conception. J Frankl Inst 340(1):1–23
Raich A, Çinar A (1996) Process disturbance diagnosis by statistical distance and angle measures. IFAC Proceedings 29(1):6602–6607
MacGregor JF, Kourti T, Nomikos P (1996) Analysis, monitoring and fault diagnosis of industrial processes using multivariate statistical projection methods. IFAC Proceedings 29(1):5941–5946
Jaffel I, Taouali O, Elaissi I, Messaoud H (2013) A new online fault detection method based on PCA technique. IMA J Math Control Inf 31(4):487–499
Fazai R, Taouali O, Harkat MF, Bouguila N (2016) A new fault detection method for nonlinear process monitoring. Int J Adv Manuf Technol 87(9-12):3425–3436
Harkat MF, Mourot G, Ragot J (2006) An improved PCA scheme for sensor FDI: Application to an air quality monitoring networkg. J Process Control 16(6):625–634
Lahdhiri H, Taouali O, Elaissi I, Jaffel I, Harakat MF, Messaoud H (2017) A new fault detection index based on Mahalanobis distance and kernel method. Int J Adv Manuf Technol 91(5-8):2799–2809
Chatti N, Guyonneau R, Hardouin L, Verron S, Lagrange S (2016) Model-based approach for fault diagnosis using set-membership formulation. Eng Appl Artif Intel 55:307–319s
Fazai R, Mansouri M, Taouali O, Harkat MF, Bouguila N (2018) Online reduced kernel principal component analysis for process monitoring. J Process Control 61:1–11
Yin S, Zhu X (2015) Intelligent particle filter and its application to fault detection of nonlinear syste. IEEE Trans Ind Electron 62(6):3852–3861
Harkat MF (2003) Détection et localisation de défauts par analyse en composantes principales. PhD thesis,Institut National Polytechnique de Lorraine-INPL
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Said, M., Fazai, R., Ben Abdellafou, K. et al. Decentralized fault detection and isolation using bond graph and PCA methods. Int J Adv Manuf Technol 99, 517–529 (2018). https://doi.org/10.1007/s00170-018-2526-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2526-4