Abstract
To improve the spindle thermal error prediction accuracy, the least absolute shrinkage and selection operator (LASSO) is used to directly select the temperature-sensitive point subset to guarantee the prediction performance of the thermal error model built by least squares support vector machines (LS-SVM). Taking a horizontal machining center as a test stand, the thermal error experiments with different spindle speed states are carried out. Then the temperature-sensitive points are selected using LASSO. The number of temperature-sensitive points is reduced from 20 to 7. Afterward, the thermal error model is designed by LS-SVM. The prediction performance and generalization performance of the thermal error model are compared with another two thermal error models using gray model (GM) and multiple linear regression (MLR), respectively. The comparison results indicate that the thermal error model derived from LS-SVM shows better prediction performance and generalization performance than those derived from GM and MLR with the highest prediction accuracy increasing about 74.6 and 54.3%, respectively. Thus, the feasibility and effectiveness of the proposed spindle thermal error robust modeling method are validated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review: part II: thermal errors. Int J Mach Tools Manuf 40(9):1257–1284
Mayr J, Jedrzejewski J, Uhlmann E, Alkan Donmez M, Knapp W, Hartig F, Wendt K, Moriwaki T, Shore P, Schmitt R (2012) Thermal issues in machine tools. CIRP Ann Manuf Technol 61(2):771–791
Li Y, Zhao WH, Lan SH, Ni J, Wu WW, Lu BH (2015) A review on spindle thermal error compensation in machine tools. Int J Mach Tools Manuf 95:20–38
Cao HR, Zhang XW, Chen XF (2016) The concept and progress of intelligent spindles: a review. Int J Mach Tools Manuf 112:21–52
Abdulshahed AM, Longstall AP, Fletcher S (2015) The application of ANFIS prediction models for thermal error compensation on CNC machine tools. Appl Soft Comput 27:158–168
Tan F, Yin GF, Yin Q, Dong GH, Wang L (2016) CNC machine tool thermal error modeling based on GM-LS-SVM hierarchical model. J Central South Univ (Sci and Technol) 12:4028–4034 (in Chinese)
Sun LJ, Ren MJ, Hong HB, Yin YH (2017) Thermal error reduction based on thermodynamics structure optimization method for an ultra-precision machine tool. Int J Adv Manuf Technol 88(5–8):1267–1277
Creighton E, Honegger A, Tulsian A, Mukhopadhyaye D (2010) Analysis of thermal errors in a high-speed micro-milling spindle. Int J Mach Tools Manuf 50(4):386–393
Wang LP, Wang HT, Li TM, Li FC (2015) A hybrid thermal error modeling method of heavy machine tools in z-axis. Int J Adv Manuf Technol 80(1–4):389–400
Holman JP (2010) Heat transfer. McGraw-Hill
Liang RJ, Ye WH, Zhang HY, Yang QF (2012) The thermal error optimization models for CNC machine tools. Int J Adv Manuf Technol 63(9–12):1167–1176
Guo QJ, Yang JG, Wu H (2010) Application of ACO-BPN to thermal error modeling of NC machine tool. Int J Adv Manuf Technol 50(5):667–675
Guo QJ, Xu RF, Yang TY, He L, Cheng X, Li ZY, Yang JG (2016) Application of GRAM and AFSACA-BPN to thermal error optimization modeling of CNC machine tools. Int J Adv Manuf Technol 83(5–8):995–1002
Ma C, Zhao L, Mei XS, Shi H, Yang J (2017) Thermal error compensation of high-speed spindle system based on a modified BP neural network. Int J Adv Manuf Technol 89(9–12):3071–3085
Miao EM, Liu Y, Liu H, Gao ZH, Li W (2015) Study on the effects of changes in temperature-sensitive points on thermal error compensation model for CNC machine tool. Int J Adv Manuf Technol 97:50–59
Wang HT, Wang LP, Li TM, Han J (2013) Thermal sensor selection for the thermal error modeling of machine tool based on the fuzzy clustering method. Int J Adv Manuf Technol 69(1):121–126
Cheng Q, Qi Z, Zhang GJ, Zhao YS, Sun BW, Gu PH (2016) Robust modelling and prediction of thermally induced positional error based on grey rough set theory and neural networks. Int J Adv Manuf Technol 83(5):1–12
Tibshirani R (1996) Regression shrinkage and selection via the lasso. J. R. Statist. Soc. B 58(1):267–288
Friedman J, Hastie T, Tibshirani R (2010) Regularization paths for generalized linear models via coordinate descent. J Statist Soft 33(1):1–22
Zou H, Hastie T (2005) Regularization and variable selection via the elastic net. J R Statist Soc B 67(2):301–320
Suykens J A K, Van Gestel T, De Brabanter J (2002) Least squares support vector machines. World Scientific
Liu SF, Dang YG, Fang ZG (2010) Gray system theory and its application. Science Press, Beijing
Zhang Y, Yang JG, Jiang H (2012) Machine tool thermal error modeling and prediction by grey neural network. Int J Adv Manuf Technol 59(9):1065–1072
ISO 230-3 (2007) Test code for machine tools part 3: determination of thermal effects. ISO copyright office, Geneva
Geisser S (1993) Predictive inference. CRC press
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tan, F., Yin, M., Wang, L. et al. Spindle thermal error robust modeling using LASSO and LS-SVM. Int J Adv Manuf Technol 94, 2861–2874 (2018). https://doi.org/10.1007/s00170-017-1096-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-1096-1