Abstract
In order to improve the practicability of the search engine of cloud manufacturing platform in small- and medium-sized enterprises (SMEs), the paper studied the matching process’ diversity, heterogeneity, and multi-constraints between the intelligent matching engine and cloud manufacturing (CMfg) service, then established an intelligent searching engine of CMfg service in SMEs which is based on ontology language for service (OWL-S), and analyzed its matching degree quantization problems of matching process between ontology concept parameters and constraint parameters. To verify its validity, we have applied it in automobile/motorcycle accessory industry. By combining a quantization method, a matching algorithm and semantic similarity, an automobile/motorcycle accessory ontology database is established. It has fulfilled the semantic inference of the service resources ontology and has realized the valid and rapid intelligent matching of cloud searching.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Huang BQ, Li CH, Yin C, Zhao XP (2013) Cloud manufacturing service platform for small and medium-sized enterprises. Int J Adv Manuf Technol 65(12):1261–1272
Li BH, Zhang L, Chai XD (2010) Introduction t o cloud manufacturing. ZTE Communications 16(4):5–8
Ma CX, Ren L, Teng DX (2012) Ubiquitous human-computer interaction in cloud manufacturing system. Comput Integr Manuf Syst 17(3):504–510
Tao F, Zhang L, Venkatesh VC, Luo Y, Cheng Y (2011) Cloud manufacturing: a computing and service-oriented manufacturing model. J Eng Manuf 225(10):1969–1976
Tao F, Zhang L, Liu YK, Cheng Y, Wang LH, Xu X (2015) Manufacturing service management in cloud manufacturing: overview and future research directions, J Manuf Eng Trans ASME 137(4):040912-1-040912-11
Wu J, Li SB (2014) The hardware resource virtual encapsulation in cloud manufacturing. Mach Des Manuf 7(7):112–115
Tao F, Cheng Y, Zhang L, Nee AYC (2015) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf. doi:10.1007/s10845-015-1042-8
Tao F, Zuo Y, Xu LD, Zhang L (2014) IoT-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Trans Ind Inf 10(2):1547–1557
Tao F, Zhao DM, Hu YF, Zhou ZD (2008) Resource service composition and its optimal-selection based on particle swarm optimization in manufacturing grid system. IEEE Trans Ind Inf 4(4):315–327
Yin C, Xia Q, Li ZW (2012) Semantic matching technique of cloud manufacturing service based on OWL-S. Comput Integr Manuf Syst 7(7):1494–1502
Li XB, Yin C, YFN S (2014) Semantic description and characteristics of machine tool resources in cloud manufacturing environment. Comput Integr Manuf Syst 20(9):2064–2171
Tao F, Li Yuan J (2013) FC-PACO-RM: a parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Trans Ind Inf 9(4):2023–2033
Zhang L, Luo YL, Tao F (2012) Cloud manufacturing: a new manufacturing paradigm. Enterp Inf Syst 8(2):167–187
LI BH, Zhang L, Ren L et al (2011) Further discussion on cloud manufacturing. Comput Integr Manuf Syst 17(3):449–457
KUNAL V, KAAPTHIK S, AMIT S et al (2005) METEOR-SWSDI: scalable P2 infrastructure registries for semantic publication and discovery of web services. J Inf Technol Manag 6(1):17–39
Peng H, ShiI ZZ, Qiu LR et al (2008) Matching algorithm of semantic Web service based on similarity of ontology concepts. Comput Eng 34(15):51–53
Song TX, Liu HM, Wei CM et al (2014) Common engines of cloud manufacturing service platform for SMEs. Int J Adv Manuf Technol 73(1):557–569
Li BH, Zhang L, Wang SL et al (2010) Cloud manufacturing: a new service -oriented networked manufacturing mode. Comput Integr Manuf Syst 16(1):1–7
Valentina D (2014) Description of a semantic-based navigation model to explore document collections in the maritime domain. Procedia Comput Sci 35:1155–1164
Wang RL (2010) SWOT analysis of the financing of SMMs. Mark Modernization 11(27):68–69
Song TX, Zhang CL, Huang BQ (2013) A cloud manufacturing service platform for small and medium enterprises. Comput Integr Manuf Syst 5(5):47–52
Wang XH, Yuan Y, Zhao ZC et al (2014) Patent literature search and its application to patent a static value calculation. Inf Stud Theory Appl 37(12):76–80
Kimura T, Tanaka Y (2010) Research on evaluation technique of patented invention using both technical value and economic value. Technology Management for Global Economic Growth( PICMET). 2010 Proceedings of PICMET'10. IEEE, 2010: 1-7
David Lichtenthal J, Eliaz S (2003) Internet integration in business marketing tactics. Ind Mark Manag 32(1):3–13
SONG TX, Zhang CL, Li CH et al (2013) A cloud manufacturing service platform for small and medium enterprises. Comput Integr Manuf Syst 31(6):1278–1283
Wei CM, Zhang CL, SONG TX, et al (2013) A cloud manufacturing service management model and its implementation. 2013 Int Conf Serv Sci (22):60-63
Meier H, Völker O, Funke B (2011) Industrial product-service system (IPS2) paradigm shift by mutually determined products and services. Int J Adv Manuf Technol 52(9):1175–1191
Chen K, Zheng WM (2009) Cloud computing: system instances and current research. J Softw 20(5):1337–1348
Erkoyuncu JA, Roy R, Shehab E, Cheruvu K (2011) Understanding service uncertainties in industrial product-service system cost estimation. Int J Adv Manuf Technol 52(9):1223–1238
Dai LL, LIU B, XIA YN et al (2008) Measuring semantic similarity between words using HowNet/ / ICCSIT'08: 2008 International Conference on Computer Science and Information Technology Washington, DC. IEEE Comput Soc 2008:601–605
Zhu ZY, Sun JHJ (2013) Improved vocabulary semantic similarity calculation based on How Net. J Comput Appl 33(8):2276–2279
Yu X, Liu JH, He M (2011) Design knowledge retrieval technology based on domain ontology for complex products. Comput Integr Manuf Syst 17(2):225–231
Zhang XW, Wang KQ, Tong SR (2014) Value modeling of customer needs to support value-driven design 20(10): 2340-2347
Keeney R (1993) Decisions with multiple objectives. Cambridge University Press, USA
Huang WD, Wang YY, Xie Q et al (2007) Research on management of design k now ledge based on ontology in the integrated product development. China Mech Eng 18(21):2566–2569
Tao F, Zhang L, Lu K, Zhao D (2012) Study on manufacturing grid resource service optimal-selection and composition framework. Enterp Inf Syst 6(2):237–264
Tao F, Zhang L, Nee AYC (2011) A review of the application of grid technology in manufacturing. Int J Prod Res 49(13):4119–4155
Deif AM (2011) A system model for green manufacturing. J Clean Prod 19(14):1553–1559
Eppler J (2014) Making knowledge visible through intranet knowledge maps: concept, elements cases. http://www.miter.org/news/theedge/april00/damore.html
Marston S, Li Z, Bandyopadhyay S, Zhang J, Ghalsasi A (2011) Cloud computing—the business perspective. Decis Support Syst 51(1):176–189
Fabrizio S (2002) Machine learning in automated text categorization. ACM Comput Surv 34(1):11–12, 32-33
SALTON G, WONG A, YANG CS (1975) A vector space model for automatic indexing. Commun ACM 18(11):613–620
Brandt SC, Morbach J, Michalis M (2008) A ontology-based approach to know ledge management in design processes. Comput Chem Eng 32(1):320–342
Yin S, Yin C, Liu F et al (2011) Outsourcing resources integration service mode and semantic description in cloud manufacturing environment. Comput Intergr Manuf Syst 17(3):526–532
Li HF, Zhang L, Jiang R (2014) Study of manufacturing cloud service matching algorithm based on OWL-S. 26th Chin Control Decis Conf (2014):4155-4160
Zhang BH (2011) A dissertation for the degree of M. eng research on matching algorithm in semantic web services based on group preference. Dissertation, Harbin Engineering University
Wang LH (2013) Machine availability monitoring and machining process planning towards Cloud manufacturing. CIRP J Manuf Sci 6(4):263–273
Kalpakjian S, Schmid S (2006) Manufacturing engineering and technology (5th ed.). Prentice Hall, Englewood Cliffs, p 1192
Li JR, Tao F, Cheng Y, Zhao LJ (2015) Big data in product lifecycle management. Int J Adv Manuf Technol 81:667–684
Zou XF, Tao F, Jiang PL, Gu SX, Qiao K, Xu L (2015) A new approach for data processing in supply chain network based on FPGA. Int J Adv Manuf Technol. doi: 10.1007/s00170-015-7803-x
Tao F, Zhang L, Lu K, Zhao D (2012) Research on manufacturing grid resource service optimal-selection and composition framework. Enterp Inf Syst 6(2):237–264
Tao F, Zhang L, Zhang ZH, Nee AYC (2010) A quantum multi-agent evolutionary algorithm for selection of partners in a virtual enterprise. CIRP Ann Manuf Technol 59(1):485–488
Tao F, Laili YJ, Zhang L, Zhang ZH, Nee AYC (2014) QMAEA: a quantum multi-agent evolutionary algorithm for multi-objective combinatorial optimization. SIMULATION: Transactions of The Society for Modeling and Simulation International 90(2):182–204
Tao F , Li C, Liao TW, Laili YJ (2015) BGM-BLA: a new algorithm for dynamic migration of virtual machines in cloud computing, IEEE Trans Serv Comput. doi: 10.1109/TSC.2015.2416928
Tao F , Zhao DM, Yefa Hu, Zude Zhou (2010) Correlation-aware resource service composition and optimal-selection in manufacturing grid. Eur J Oper Res 201(1):129–143
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sheng, B., Zhang, C., Yin, X. et al. Common intelligent semantic matching engines of cloud manufacturing service based on OWL-S. Int J Adv Manuf Technol 84, 103–118 (2016). https://doi.org/10.1007/s00170-015-7996-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7996-z