Abstract
This paper presents a predictive model of a cable-harnessed structure through using the Spectral Element Method (SEM) and this is compared to a finite element approach. SEM is an element-based method that combines the generality of the finite element method with the accuracy of spectral techniques. The exact dynamic stiffness matrices are used as the element matrices in the Finite Element Method (FEM). Thus it is possible to generate the meshes on geometric domains of concern. The spectral element can be assembled in the same terminology of the FEM. After assembly and application of the boundary conditions, the global matrix can be solved for response of model, repeatedly at all discrete frequencies because the dynamic stiffness matrices are computed at each frequency. Here we model a cable-harnessed structure as a double beam system. The presented SEM model can define location and number of connections very conveniently. Comparison is conducted between the FEM and SEM for several cases. The results show that the proposed SEM approach can be used as the exact solution of cable harnessed structures.
Access provided by Autonomous University of Puebla. Download conference paper PDF
Similar content being viewed by others
Keywords
35.1 Introduction
In satellite applications modeling is extremely important in order to predict behavior during launch and in orbit. Today detailed finite element models of satellites are accurate and agree well with experimental data. However once the satellites are hung with cable harnesses the ability to model the system dynamics has eluded modeling engineers. Here we investigate in a simple way the effects of adding cables to a simple structure with the goal of developing an understanding of the physics of cables interacting with a structure. The goal of this research is to obtain the predictive and precise model of the cable harnessed structure.
To obtain a simplified model of cable harnessed structure, the total system can be considered as a double beam system with both beams connected by spring connection at specific locations to emulate the effect of attaching cables to the structure.
The response of single Euler-Bernoulli beam is a classical example of a distributed system. And exact solution of this beam can be obtained in various ways [1]. However, when secondary beam is attached to the main beam by means of several spring connections, obtaining the solution of system can be more complicated. Several authors have investigated double-beam systems elastically combined by a distributed spring in parallel. Seelig and Hoppman II [2], worked out the solution of differential equation of elastically connect parallel beams. Rao [3] considered the free response of several Timoshenko beam systems. Gürgöze [4, 5] dealt with the derivation of the frequency equation of a clamped-free Euler Bernoulli beam with several spring-mass systems attached in mid of span by means of the Lagrange multipliers method. Vu et al. [6] presented an exact method for the vibration of a double-beam system subject to harmonic excitation. The system consists of a main beam with an applied force, and an auxiliary beam, with a distributed spring k and dashpot c in parallel between the two beams. Wu and Chou [7] considered the beam connected with two degrees-of-freedom systems at specific location.
Doyle [8] and Lee [9] describe the spectral element method very well. Doyle introduced the basic formulation of spectral element matrix by Euler-Bernoulli beam. And Lee summarized the various ways to derive the spectral element matrix for structural elements such as Euler beam, Timoshenko beam and plate. Lee also presented several practical applications of SEM. Many authors used the dynamic stiffness approach very closely related to the SEM. Banerjee [10] and Chen [11] used dynamic stiffness matrix for the beam with attached two degree-of-freedoms system. Li and Hua [12, 13] considered elastically connected two and three parallel beams by dynamic stiffness analysis. Jiao et al. [14] investigated the Euler beam with an arbitrary cross section. However, most of papers only considered the clamped-free or fixed-fixed or simply supported boundary conditions. Thus the free-free boundary condition is considered and tried for both single beam and double beam in this paper. And the procedure of modeling the cable-harnessed system with the SEM is presented. Through the SEM approach, we can obtain the extremely high accurate result with a minimum number of DOFs. And it can be considered as a numerical exact solution because the SEM is based on the exact solutions of the governing differential equation of the element. Thus the SEM results are compared with FEM results and exact solution in single Euler Bernoulli beam model to validate the accuracy. Then the SEM approach has extended to double beam system. Furthermore, various connections will be considered by presented SEM model.
35.2 The SEM for Euler-Bernoulli Beam with a Free-Free Boundary Condition
A single beam can be considered as Euler-Bernoulli beam or a long slender beam if width and thickness is 10 times less than length [1]. For Euler beam, the shear deformation can be neglected. Thus we can only consider the transverse displacement. The bending moment of beam and shear force can be defined by
If EI(x) and A are assumed to be constant and the no external force exists, the free vibration of beam is governed by
Assume the solution of Eq. (35.2) in spectral form to be
Substitute Eq. (35.3) into (35.2), then we get the eigenvalue problems at the specific frequency ω = ω n such as
Assume the general solution of Eq. (35.4) as
Substituting Eq. (35.5) into (35.4) yields the following dispersion relation equation by
The nodal displacement and slope at both ends can be expressed by
where \(\{a\} ={ \left [\begin{array}{cccc} A&B &C &D\\ \end{array} \right ]}^{T}\) and
And the transverse shear force and bending moments at the nodal points are given by
where
From the Eqs. (35.8), (35.9) and (35.10), the relation f and d can be obtained such as
Finally, the spectral element matrix of Euler Bernoulli Beam is given by
where
After obtaining the spectral element matrix, we can assemble elements to generate the global spectral matrix. And we apply the boundary conditions to the global system. The global system can be expressed by
Owing to usage of the exact dynamic stiffness matrix to formulate the spectral element matrix, we can solve exactly the system characteristics with minimum number of element matrix. Especially, single Euler-Bernoulli beam with free-free boundary condition case, we can obtain the exact solution with only one element and no application of boundary condition. Now, we can calculate the natural frequencies by solving the eigenvalue problem for spectral element model given by
Similar to the regular eigenvalue problem, we need to consider that determinant of spectral element matrix [S g ] is zero, det(S(ω NAT )) = 0, to find the natural frequencies. However, the spectral element matrix consists of transcendental functions such as sine, cosine, hyperbolic cosine (cosh), and hyperbolic sine (sinh). We cannot use the linear eigensolver such as ‘eig’ in MATLAB. The several approaches to find the eigenvalues are summarized by Lee [9]. The determinant of global stiffness matrix [S g ] can be simplified as
The conventional and spectral beam elements will be compared using a simple example. A free vibration of free-free beam will be analyzed using both types of elements. The material used in the example is aluminum with elastic modulus of 7 ×1010 N∕m2 and density of 2, 700 kg∕m3. The dimensions of beam are 1. 2192 ×0. 0254 ×0. 003175 m. From the characteristic equation of free-free beam [1], cos(βL)cosh(βL) = 1, the exact natural frequencies are calculated. And the root-finding algorithms [15] are used to find the ω n in SEM.
Table 35.1 shows the natural frequencies of free-free beam. The SEM results are identical to exact solution. And the FEM results go closer to SEM and exact solution as the number of elements is increased. This tendency also can be notified by means of the receptance versus frequency graph in Fig. 35.1. In Fig. 35.1a, FEM gives 3 good natural frequencies. The number of elements is increased to 10 in Fig 35.1b. And the 5 natural frequencies are almost identical with SEM frequencies. Considering the high frequency range, the more elements are necessary to obtain the good results.
35.3 The SEM for Double Beam with a Free-Free Boundary Condition
Most of papers considered the double beam such that two beams are connected with distributed spring connections, not in specific location. In this paper, we can define the exact number and locations of connections. Through this approach, the effect of number and locations of connection can also be identified.
Considering the double beam system in Fig. 35.2 each beam is 2N d.o.f system. And the spring connection exists between ith nodes of beam 1 and beam 2. For beam 1 and beam 2, we can formulate the global stiffness matrix by means of Eq. (35.12). From the relation between nodal displacement and force, the combined global stiffness matrix without spring connection can be shown as
where
The global stiffness matrix S g, 1 and S g, 2 are 2N ×2N matrices and the global displacement and force vector d g, 1, d g, 2, f g, 1 and f g, 2 are 2N ×1 vectors. If the force f k is working on between ith nodes of beam 1 and beam 2 due to the spring connection, f k can be given by
The total combined system can be expressed as
Let’s introduce the locator vector {L i } The vector {L i } is 4N ×1 vector correspondent with [d g, 1 d g, 2]T. The 2i − 1th component of {L i } is 1 and the \(2N + 2i-\)1th component of {L i } is -1 and the remainders are zero.
where p is the total number of connections. The FEM and SEM will be compared using a double beam example. A free vibration of free-free double beam will be analyzed for several connection cases. The material properties of both beams are summarized in Table 35.2. And the spring constant k is 105 N∕m. And the root-finding algorithms [15] are utilized to find the ω n in the SEM.
The double beam system with 1, 2, 3, and 5 connections has simulated by means of material properties in Table 35.2. The result from 1st ∼ 11th modes are summarized in Table 35.3. The SEM uses minimum number of element to obtain the exact natural frequencies. As the connections are added, the natural frequencies increase as in Fig. 35.3.
In (a) of Fig. 35.4 ∼ 35.7, the small number of elements are used in the FEM, the difference between the FEM and the SEM goes bigger in higher frequency range. About 10 times more number of elements are used in (b) of Fig. 35.4 ∼ 35.7. Frequencies by the FEM are very close with the SEM results.
35.4 Conclusion
The SEM is presented as the numerical exact solution to predict the response of a cable harnessed structure. The single and double beam cases are considered to validate the exactness of the SEM. In all cases, the comparisons are performed by means of calculated natural frequencies and the receptance graphs. The SEM shows the exact solution, requiring fewer elements than the FEM, with the minimum number of degree-of-freedoms. Moreover, the SEM allows us to define the locations very conveniently. Through this convenience, the effect of number of connections is also investigated. As the number of connections increases, the natural frequencies increase. The effectiveness and accuracy of the proposed SEM are demonstrated with several numerical examples.
References
Inman DJ (2008) Engineering vibration 4th edition Pearson Prentice Hall, Upper Saddle River
Seelig JM, Hoppmann WH II (1964) Normal mode vibrations of systems of elastically connected parallel bars J Acoust Soc Am 36(1):93–99
Rao SS (1974) Natural vibrations of systems of elastically connected Timoshenko beams J Acoust Soc Am 55(6):1232–1237
Gürgöze M (1996) On the eigenfrequencies of a cantilever beam with attached tip mass and a spring-mass system J Sound Vib 190(2):149–162
Gürgöze M (1998) On the alternative formulations of the frequency equation of a Bernoulli-Euler beam to which several spring-mass systems are attached in-span J Sound Vib 217(3):585–595
Vu HV, Ordonez AM Karnopp BH (2000) Vibration of a double-beam system J Sound Vib 229(4):807–822
Wu JS Chou HM (1998) Free vibration analysis of a cantilever beam carrying any number of elastically mounted point masses with the analytical-and-numerical-combined method. J Sound Vib 213(2):317–332
Doyle JF (1997) Wave propagation in structures: spectral analysis using fast discrete Fourier transforms Springer, New York
Lee U (2009) Spectral element method in structural dynamics Wiley, Singapore/Hoboken
Banerjee JR (2003) Dynamic stiffness formulation and its application for a combined beam and a two degree-of-freedom system J Vib Acoust 125(3):351–358
Chen DW (2006) The exact solution for free vibration of uniform beams carrying multiple two-degree-of-freedom spring–mass systems J Sound Vib 295(1–2):342–361
Li J Hua H (2007) Spectral finite element analysis of elastically connected double-beam systems Finite Elem Anal Des 43(15):1155–1168
Li J Hua H (2008) Dynamic stiffness vibration analysis of an elastically connected three-beam system Appl Acoust 69(7):591–600
Jiao S, Li J, Hua H Shen R (2008) A spectral finite element model for vibration analysis of a beam based on general higher-order theory Shock Vib 15(2):179–192
Burden RL Faires JD (2005) Numerical analysis Thomson Brooks/Cole, Belmont
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 The Society for Experimental Mechanics
About this paper
Cite this paper
Choi, J., Inman, D.J. (2014). Spectral Element Method for Cable Harnessed Structure. In: Allemang, R., De Clerck, J., Niezrecki, C., Wicks, A. (eds) Topics in Modal Analysis, Volume 7. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-6585-0_35
Download citation
DOI: https://doi.org/10.1007/978-1-4614-6585-0_35
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-6584-3
Online ISBN: 978-1-4614-6585-0
eBook Packages: EngineeringEngineering (R0)