Abstract
In underground engineering practice, the surrounding rocks are subjected to a nonuniform stress field with various radial gradients. In this study, a series of conventional triaxial repetitive impact tests using hollow cylindrical sandstone (HOS) specimens were conducted to reveal the impact waveform features and failure properties of rocks under nonuniform stress conditions. The tests were conducted using a modified large diameter split Hopkinson pressure bar testing system. The confining pressure was set as 5, 10 and 12 MPa. The data of specimens under equilibrium stress states were chosen and analyzed, and the results showed that more applied numbers of cyclic impact loads were needed to break rocks with the increase of confining pressure. Three types of cracks, i.e., ring-shaped cracks around the hole in the center of specimens, axial cracks located in the outer cylindrical surface, and lateral cracks fracturing rock fragments into small pieces appeared in HOS specimens. The failure degrees of HOS specimens could be judged by the waveform features of the reflected wave, and the waveform features of reflected wave are similar in the same failure mode, regardless of the impact velocity and the number of impacts, which only affect the failure degree.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Data availability
The datasets generated for this study are available on request to the corresponding author.
References
Alsayed MI (2000) Utilising the hoek triaxial cell for multiaxial testing of hollow rock cylinders. Int J Rock Mech Min 39(3):355–366. https://doi.org/10.1016/S1365-1609(02)00030-8
Bailly P, Delvare F, Vial J, Hanus JL, Biessy M, Picart D (2011) Dynamic behavior of an aggregate material at simultaneous high pressure and strain rate: SHPB triaxial tests. Int J Impact Eng 38(2–3):73–84. https://doi.org/10.1016/j.ijimpeng.2010.10.005
Brady BHG, Brown ET (2005) Rock mechanics for underground mining. Springer, Dordrecht
Cho TF, Haimson BC (1987) Effect of cyclic loading on circular openings-results of a laboratory simulation. In: Hoerger SF, Young DS (eds) Proc 28th US symposium on rock mechanics, Tucson. A A Balkema, Publ Rotterdam, pp 805–816
Du K, Tao M, Li XB, Zhou J (2016) Experimental study of slabbing and rockburst induced by true-triaxial unloading and local dynamic disturbance. Rock Mech Rock Eng 49(9):3437–3453. https://doi.org/10.1007/s00603-016-0990-4
Du K, Su R, Tao M, Yang CZ, Momeni A, Wang SF (2019) Specimen shape and cross-section effects on the mechanical properties of rocks under uniaxial compressive stress. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-019-01518-x
Du K, Yang CZ, Su R, Tao M, Wang SF (2020) Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress. Int J Rock Mech Min Sci 130:104309. https://doi.org/10.1016/j.ijrmms.2020.104309engfracmech.2019.106577
Eugene B, Robertson C (1966) Experimental study of the strength of rocks. Bull Geol Soc Am 66:1275–1314. https://doi.org/10.1130/0016-7606(1955)66[1275:ESOTSO]2.0.CO;2
François B, Labiouse V, Dizier A, Ferdinando M, Robert C, Frédéric C (2014) Hollow cylinder tests on boom clay: modelling of strain localization in the anisotropic excavation damaged zone. Rock Mech Rock Eng 47(1):71–86. https://doi.org/10.1007/s00603-012-0348-5
Hokka M, Black J, Tkalich D, Fourmeau M, Kane A, Hoang NH, Li CC, Chen WW, Kuokkala VT (2016) Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. Int J Impact Eng 91:183–193. https://doi.org/10.1016/j.ijimpeng.2016.01.010
Khandelwal M, Ranjith PG (2017) Study of crack propagation in concrete under multiple loading rates by acoustic emission. Geomech Geophys Geo-Energy Geo-Resource 3:393–404
Kumari WGP, Beaumont DM, Ranjith PG, Perera MSA, Isaka BLA, Khandelwal M (2019) An experimental study on tensile characteristics of granite rocks exposed to different high-temperature treatments. Geomech Geophys Geo-energ Geo-resour 5:47–64
Labiouse V, Sauthier C, You S (2014) Hollow cylinder simulation experiments of galleries in boom clay formation. Rock Mech Rock Eng 47(1):43–55. https://doi.org/10.1007/s00603-012-0332-0
Lee DH, Juang CH, Chen JW, Lin HM, Shieh WH (1999) Stress paths and mechanical behavior of a sandstone in hollow cylinder tests. Int J Rock Mech Min 36(7):857–870. https://doi.org/10.1016/S0148-9062(99)00063-7
Li XB, Zhou ZL, Lok TS, Hong L, Yin TB (2008) Innovative testing technique of rock subjected to coupled static and dynamic loads. Int J Rock Mech Min 45(5):739–748. https://doi.org/10.1016/j.ijrmms.2007.08.013
Li XB, Zou Y, Zhou ZL (2014) Numerical simulation of the rock SHPB test with a special shape striker based on the discrete element method. Rock Mech Rock Eng 47(5):1693–1709. https://doi.org/10.1007/s00603-013-0484-6
Li XF, Zhang QB, Li HB, Zhao J (2018) Grain-based discrete element method (gb-dem) modelling of multi-scale fracturing in rocks under dynamic loading. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-018-1566-2
Lu YB, Li QM (2011) About the dynamic uniaxial tensile strength of concrete-like materials. Int J Impact Eng 38(4):171–180. https://doi.org/10.1016/j.ijimpeng.2010.10.028
Lv TH, Chen XW, Chen G (2017) Analysis on the waveform features of the split Hopkinson pressure bar tests of plain concrete specimen. Int J Impact Eng 103:107–123. https://doi.org/10.1016/j.ijimpeng.2017.01.004
Peng K, Zhou JQ, Zou QL, Yan FZ (2019a) Deformation characteristics of sandstones during cyclic loading and unloading with varying lower limits of stress under different confining pressures. Int J Fatigue 127:82–100. https://doi.org/10.1016/j.ijfatigue.2019.06.007
Peng K, Zhou JQ, Zou QL, Liu ZP, Mou JH (2019b) Effect of crack angles on energy characteristics of sandstones under a complex stress path. Eng Fract Mech 218:106577
Tao M, Ma A, Cao WZ, Li XB, Gong FQ (2017) Dynamic response of pre-stressed rock with a circular cavity subject to transient loading. Int J Rock Mech Min 99:1–8. https://doi.org/10.1016/j.ijrmms.2017.09.003
Tao M, Zhao HT, Li XB, Li X, Du K (2018) Failure characteristics and stress distribution of pre-stressed rock specimen with circular cavity subjected to dynamic loading. Tunn Undergr Sp Technol 81:1–15. https://doi.org/10.1016/j.tust.2018.06.028
Timoshenko SP, Goodier JN (2003) Theory of elasticity. Tsinghua University Press, Beijing, pp 57–80
Wang SF, Li XB, Du K, Wang SY, Tao M (2018a) Experimental study of the triaxial strength properties of hollow cylindrical granite specimens under coupled external and internal confining stresses. Rock Mech Rock Eng 51:2015–2031. https://doi.org/10.1007/s00603-018-1452-y
Wang SM, Liu YS, Zhou J, Wu QH, Ma S, Zhou Z (2018b) Dynamic compressive characteristics of sandstone under confining pressure and radial gradient stress with the SHPB test. Adv Civ Eng. https://doi.org/10.1155/2018/1387390
Wang SF, Li XB, Yao JR, Gong FQ, Li X, Du K, Tao M, Huang LQ, Du SL (2019a) Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock. Int J Rock Mech Min 122:104063. https://doi.org/10.1016/j.ijrmms.2019.104063
Wang SM, Liu YS, Du K, Zhou J (2019b) Dynamic failure properties of sandstone under radial gradient stress and cyclical impact loading. Front Earth Sc-switz 7:251. https://doi.org/10.3389/feart.2019.00251
Wu QH, Li XB, Weng L, Li QF, Zhu YJ, Luo R (2019) Experimental investigation of the dynamic response of prestressed rockbolt by using an SHPB-based rockbolt test system. Tunn Undergr Sp Technol 93:103088. https://doi.org/10.1016/j.tust.2019.103088
Xia KW, Yao W (2015) Dynamic rock tests using split Hopkinson (Kolsky) bar system—a review. J Rock Mech Geotech Eng 7(1):27–59. https://doi.org/10.1016/j.jrmge.2014.07.008
Yang SQ (2016) Experimental study on deformation, peak strength and crack damage behavior of hollow sandstone under conventional triaxial compression. Eng Geol 213:11–24. https://doi.org/10.1016/j.enggeo.2016.08.012
Zhang QB, Zhao J (2014) A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock Mech Rock Eng 47(4):1411–1478. https://doi.org/10.1007/s00603-013-0463-y
Zhou ZL, Li XB, Ye ZY, Liu KW (2010) Obtaining constitutive relationship for rate-dependent rock in SHPB tests. Rock Mech Rock Eng 43(6):697–706. https://doi.org/10.1007/s00603-010-0096-3
Zhou YX, Xia KW, Li XB, Li HB, Ma GW, Zhao J, Zhou ZL, Dai F (2011) Suggested methods for determining the dynamic strength parameters and Mode-I fracture toughness of rock materials. Int J Rock Mech Min 49(1):105–112. https://doi.org/10.1016/j.ijrmms.2011.10.004
Zhou J, Li X, Shi X (2012) Long-term prediction model of rockburst in underground openings using heuristic algorithms and support vector machines. Saf Sci 50(4):629–644
Zhou JL, Li XB, Mitri HS (2016) Classification of rock burst in underground projects: comparison of ten supervised learning methods. J Comput Civil Eng 30(5):04016003. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000553
Zhou J, Li X, Mitri HS (2018) Evaluation method of rockburst: State-of-the-art literature review. Tunn Undergr Space Tech 81:632–659
Acknowledgements
The work reported here is supported by financial grants from both the National Natural Science Foundation of China (51774326, 41807259, 51604109 51704109). The authors acknowledge financial contribution and appreciation to the organizations that supported this basic research.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, S., Liu, Y., Du, K. et al. Waveform features and failure patterns of hollow cylindrical sandstone specimens under repetitive impact and triaxial confinements. Geomech. Geophys. Geo-energ. Geo-resour. 6, 57 (2020). https://doi.org/10.1007/s40948-020-00183-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40948-020-00183-9