Abstract
Understanding of brittle and ductile behavior in low permeability shale formation is essential for optimizing the completion and stimulation treatment in a shale play. For the quantification of brittleness in shale, several methods for estimating fracability index have been proposed in the literature. However, uncertainties still exist in the interpretation of fracability to decide where to place perforation clusters, what magnitude of fracability index mean to hydraulic fracture initiation and propagation, and how brittleness is best defined. This study aims to clarify these unresolved issues by introducing improved fracturing-index (FI) model after modifying Yuan et al. (SPE J 2017:1–9, 2007) fracability-evaluation model (Frac). Comparing with the use of Frac, the improved FI accurately predicts the brittle and ductile regions and provide a comparatively better idea about favorable fracturing sweet spots at TOC rich zones with added advantages of estimating efficient fracture initiation and propagation, and resistant to proppant embedment. In this study, mechanical rock properties were derived through acoustic logging data to develop mechanical earth models and designed brittleness templates for differentiating brittle and ductile regions in Longmaxi gas shale reservoir. The effectiveness of designed brittleness templates was verified through improved FI evaluation model and pre-existing fractures. The obtained result revealed that the points of high FI fall exactly into the predicted brittle regions and the points of low FI fall exactly into the predicted ductile regions. The applicability of the designed brittleness templates was further verified through the data from offset Well J-3, laboratory testing of several outcrop samples, and shale sample from different origin with varying composition.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Abbreviations
- TOC:
-
Total organic carbon
- BI:
-
Brittleness index
- BIm :
-
Mineralogy based brittleness index
- FI:
-
Fracturing index
- Frac:
-
Fracability-evaluation model
- XRD:
-
X-ray diffraction
- ECS:
-
Elemental capture spectroscopy
- FE-SEM:
-
Field emission scanning electron microscopy
- E:
-
Young’s modulus
- ν:
-
Poisson’s ratio
- G:
-
Shear modulus
- K:
-
Bulk modulus
- σt :
-
Tensile strength
- KIC :
-
Mode-1 fracture toughness
- KIIC :
-
Mode-II fracture Toughness
- σh :
-
Minimum horizontal stress
- λ:
-
Lamè’s parameters
- µ:
-
Lamè’s parameters
References
Al-Shayea NA, Khan K, Abduljauwad SN (2000) Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock. Int J Rock Mech Min Sci 37(4):629–643
Alzate B, Devegowda D (2013) Integration of surface seismic, microseismic and production logs for shale gas characterization: methodology and field applications. Interpretation 1:SB37–SB49
Berard T, Liu Q, Dubost FX, Jing B (2012) A screening process for shale gas prospecting. SPE Pap 154736:19
Brown GJ, Reddish DJ (1997) Experimental relation between rock fracture toughness and density. Int J Rock Mech Min Sci 34(1):153–155
Chang C, Zoback MD, Khaksar A (2006) Emprical relations between rock strength and physical properties in sedimentary rocks. J Pet Sci Eng 51:223–227
Chen M, Zhang G (2004) Laboratory measurement and interpretation of the fracture toughness of formation rocks at great depth. J Petrol Sci Eng 41(1–3):221–231
Dai J, Zou C, Liao S et al (2014) Geochemistry of the extremely high thermal maturity longmaxi shale gas, Southern Sichuan Basin. Org Geochem 74:3–12
Deng JG, Chen ZR, Geng YN et al (2013) Prediction model for in situ formation stress in shale reservoir. J China Univ Petrol 37(6):59–64
Dutta J, Bhardwaj N, Kumar A (2018) Integration of mini-frac stress results with core data to identify ductile behavior of overpressured sandstone reservoir in deep-water offshore Krishna-Godavari basin, India. Geomech Geophys Geo-Energy Geo-Resour 4:11–28
Dwivedi RD, Soni AK (2000) Fracture toughness of rocks under sub-zero temperature conditions. Int J Rock Mech Min Sci 37:1267–1275
Economides MJ, Nolte KG (2000) Reservoir simulation, 3rd edn. Wiley, New York
EIA, Energy Information Administration (2013) Technically recoverable shale oil and shale gas resources: an assessment of 137 shale formations in 41 countries outside the United States
Fang J, Chen Q, Melchin MJ (2013) Quantitative Stratigraphy of the Wufeng and Lungmachi black shales and graptolite evolution during and after the late ordovician mass extinction. Palaeogeogr Palaeoclimatol Palaeoecol 389:96–114
Fjaer E, Holt RM, Horsrud P et al (2008) Petroleum related rock mechanics, vol 53, 2nd edn. Elsevier, Amsterdam
Gholami R, Rasouli V (2014) Mechanical and elastic properties of transversely isotropic shale. Rock Mech Rock Eng 47:1763–1773
Glorioso JC, Rattia A (2012) Unconventional reservoirs: basic petrophysical concepts for shale gas. SPE Pap 153004:38
Goodway B, Perez M, Varsek J, Abaco C (2010) Seismic petrophysics and isotropic -anisotropic AVO methods for unconventional gas exploration. Lead Edge 29:1500–1580
Grieser B, and Bray J (2007) Identification of production potential in unconventional reservoirs. In: SPE production and operations symposium, SPE #106623
Hamidi F, Scheuermann A, Galindo-Torres SA, Pedroso D, Li L (2018) Synthetic low-strength materials as rock substitutes for physical model studies. Geomech Geophys Geo-Energy Geo-Resour. https://doi.org/10.1007/s40948-018-0083-9
Han S, Zhang J, Yang C, Bai S, Huang L, Dang W, Wang C (2016) Well log evaluation of shale gas reservoirs and preservation conditions of Lower Cambrian shale succession in Cengong Block of southeast Sichuan basin, south China. J Nat Gas Sci Eng 33:337–346
Han Y, Lai B, Liu H, Li H (2018) Measurement of elastic properties in Brazilian disc test: solution derivation and numerical verification. Geomech Geophys Geo-Energy Geo-Resour 4:63–77
Holt RM, Fjaer E, Stenebråten JF, Nes OM (2015) Brittleness of shales: relevance to borehole collapse and hydraulic fracturing. J Pet Sci Eng 131:200–209
Horsrud P (2001) Estimating mechanical properties of shale from empirical correlations. SPE Pap 56017:68–73
Hu Y, Perdomo G, Wu K, Chen Z, Zhang K (2015b) New models of brittleness index for shale gas reservoir: weights of brittle minerals and rock mechanics parameters. Paper SPE 177010 presented at the SPE Asia Pacific unconventional resources conference and exhibition, brisbane, Australia, 9–11 Nov 2015
Huang JL, Zou CN, Li JZ (2012) Shale gas generation and potential of the lower Cambrian Qiongzhusi formation in the Southern Sichuan Basin, China. Petrol Explor Dev 39(1):75–81
Ibanez WD, Kronenberg AK (1993) Experimental deformation of shale: mechanical properties and microstructural indicators of mechanisms. Int J Rock Mech Min Sci Geomech Abstr 30:723–734
Islam MdA, Skalle P (2013) An experimental investigation of shale mechanical properties through drained and undrained test mechanisms. Rock Mech Rock Eng 46:1391–1413
Jarvie DM, Hill RJ, Ruble TE, Pollastro RM (2007) Unconventional shale-gas systems: the Mississippian Barnett Shale of North-Central Texas as one model for thermogenic shale-gas assessment. AAPG Bull 91:475–499
Jin ZH, Johnson SE (2017) Effects of elastic anisotropy on primary petroleum migration through buoyancy-driven crack propagation. Geomech Geophys Geo-Energy Geo-Resour 3:365–378
Jin XC, Shah SN, Roegiers JC, Zhang B (2014a) Fracability evaluation in shale reservoirs-an integrated petrophysics and geomechanics approach. In: SPE hydraulic fracturing technology conference SPE, pp 168–589
Jin XC, Shah SN, Truax J, Roegiers JC (2014b) A practical petrophysical approach for brittleness prediction from porosity and sonic logging in shale reservoirs. In: SPE annual technical conference and exhibition, SPE, p 170972
Jin X, Shah SN, Roegiers JC (2015) An integrated petrophysics and geomechancis approach for fracability evaluation in shale reservoirs. SPE J 20:518–526
Khandelwal M, Ranjith PG (2010) Correlating index properties of rocks with P-wave measurements. J Appl Geophys 71(1):1–5
Kuila U, Dewhurst DN, Siggins AF, Raven MD (2011) Stress anisotropy and velocity anisotropy in low porosity shale. Tectonophysics 503:34–44
Kwon O, Kronenberg AK (1994) Deformation of wilcox shale: undrained strength and effects on strain rate. ARMA Pap 1994–0757:9
Lai FQ, Sun JM, Su YD et al (2007) Prediction of fracture pressure using multi-pole array acoustic logging. Prog Explor Geophys 30(1):39–42
Lai J, Wang G, Huang L, Li W, Ran Y, Wang D, Zhou Z, Chen J (2015) Brittleness index estimation in a tight shaly sandstone reservoir using well logs. J Nat Gas Sci Eng 27:1536–1545
Lashkaripour GR, Rastegarnia A, Ghafoori M (2018) Assessment of brittleness and empirical correlations between physical and mechanical parameters of the Asmari limestone in Khersan 2 dam site, in southwest of Iran. J Afr Earth Sci 138:124–132
Li Y, Wang X, Wu B, Li G, Wang D (2016) Sedimentary facies of marine shale gas formations in Southern China: the lower Silurian longmaxi formation in the Southern Sichuan Basin. J f Earth Sci 27(5):807–822
Li Z, Lib L, Lic M, Zhang L, Zhang Z, Huang B, Tang C (2018) A numerical investigation on the effects of rock brittleness on the hydraulic fractures in the shale reservoir. J Nat Gas Sci Eng 50:22–32
Liang C, Jiang ZX, Yang YT, Wei XJ (2012) Shale lithofacies and reservoir space of the Wufeng Longmaxi Formation, Sichuan Basin,China. Petrol Explor Dev 39(6):736–743
Liu S, Deng B, Li Z (2012) Architecture of basin-mountain systems and their influences on gas distribution. A case study from the Sichuan Basin, South China. J Asian Earth Sci 47:204–215
Masri M, Sibai M, Shao JF, Mainguy M (2014) Experimental investigation of the effect of temperature on the mechanical behavior of Tournemire shale. Int J Rock Mech Min Sci 70:185–191
Meier T, Rybacki E, Backers T, Dresen G (2015) Influence of bedding angle on borehole stability: a laboratory investigation of transverse isotropic oil shale. Rock Mech Rock Eng 48:1535–1546
Nasseri MHB, Schubnel A, Young RP (2007) Coupled evolution of fracture toughness and elastic wave velocities at high crack density in thermally treated westerly Granite. Int J Rock Mech Min Sci 44(4):601–616
Naumann M, Hunsche U, Schulze O (2007) Experimental investigations on anisotropy in dilatancy, failure and creep of Opalinus clay. Phys Chem Earth 32:889–895
Nie X, Zou C, Pan L, Huang Z, Liu D (2013) Fracture analysis and determination of in situ stress direction from resistivity and acoustic image logs and core data in the Wenchuan Earthquake Fault Scientific Drilling Borehole-2 (50–1370 m). Tectonophysics 593:161–171
Ozfırat MK, Hayati Y, Ferhan S, Olgay Y (2016) A new approach to rock brittleness and its usability at prediction of drillability. J Afr Earth Sc 119:94–101
Perez R, Marfurt K (2014) Mineralogy based brittleness prediction from surface seismic data: application to the Barnett Shale. Interpretation 2:T255–T271
Perez R, Marfurt K (2015) Identification of brittle/ductile areas in unconventional reservoirs using seismic and microseismic data: application to the Barnett Shale. Interpretation 3:T233–T243
Rickman R, Mullen MJ, Petre JE, Grieser WV, Kundert D (2008) A practical use of shale petrophysics for stimulation design optimization: all shale plays are not clones of the Barnett shale. Presented at the SPE annual technical conference and exhibition, Denver, Colorado, USA, 21–24 Sept 2008, SPE 115258
Ruyue W, Wenlon D, Dajian G (2015) Logging evaluation method and its application for total organic carbon content in shale: a case study on the lower Cambrian Niutitang formation in Cengong block, Guizhou Province. Journal of China Coal Society 40(12):2874–2883
Shao CR, Cao XJ, Chen GX et al (2013) A fast forward algorithm for LWD gamma-ray response and its geosteering application. Chin J Geophys 56(11):3932–3942 (in Chinese)
Sharma RK and Chopra S (2013) New Attribute for determination of lithology and brittleness. In: AAPG annual convention and exhibition, Long Beach, California, USA, 22–25 Apr, 2012: Search and Discovery Article #41155
Sondergeld CH, Newsham KE, Comisky JT, Rice MC, Rai CS (2010) Petrophysical considerations in evaluating and producing shale gas resources. SPE Pap 131768:34
Sone H, Zoback M (2013) Mechanical properties of shale gas reservoir rocks—part 1: static and dynamic elastic properties and anisotropy. Geophysics 78(5):D381–D392
Speight JG (2013) Shale gas production processes. Elsevier, Oxford, p 170
Tingay M, Reinecker J, & Müller B (2008) Borehole breakout and drilling-induced fracture analysis from image logs. World Stress Map Pro Stress anal guidel 1–8
Wang G, Carr TR (2012) Methodology of organic-rich shale lithofacies identification and prediction: a case study from Marcellus Shale in the Appalachian basin. Comput Geosci 49:151–163
Wang FP, Gale JF (2009) Screening criteria for shale-gas systems. Gulf Coast Assoc Geol Soc Trans 59:779–793
Warpinski NR, Mayerhofer MJ, Vincent MC, Cipolla CL, Lolon EP (2008) Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity. SPE Pap 114173:19
Weicht D (2015) 3D seismic mechanical stratigraphy and petrophysical analysis of the Marcellus Shale in Taylor County, WV: thesis, West Virginia University, 88
Wu Y, Li X, He J, Zheng B (2016) Mechanical properties of longmaxi black organic-rich shale samples from South China under uniaxial and triaxial compression states. Energies 9:1088
Wu J, Zhang S, Cao H, Zheng M, Sun P, Luo X (2018) Fracability evaluation of shale gas reservoir—a case study in the lower Cambrian Niutitang formation, northwestern Hunan, China. J Petrol Sci Eng 164:675–684
Yang Y, Hiroki S, Hows A, Zoback MD (2013) Comparison of brittleness indices in organic-rich shale formations. Paper ARMA 13-403 presented at the 47th US Rock Mechanics/Geomechanics Symposium, San Francisco, California, USA, 23–26 June 2013
Yang Y, Ju Y, Sun Y, Zhang D (2015) Numerical study of the stress field during crack growth in porous rocks. Geomech Geophys Geo-Energy Geo-Resour 1:91–101
Yasin Q, Du Q, Sohail GM, Ismail A (2017a) Impact of organic contents and brittleness indices to differentiate the brittle-ductile transitional zone in shale gas reservoir. Geosci J 21(5):779–789
Yasin Q, Du Q, Sohail GM, and Hawaks C (2017b) Brittleness prediction based on mechanical properties-application to longmaxi shale. Presented at 137th (2017 FALL) SEGJ conference, Tokyo Institute of Technology, Kanagawa, Japan
Yuan J, Zhou J, Liu S, Feng Y, Deng J, Xie Q, Lu Z (2007) An Improved fracability evaluation method for shale reservoirs based on new fracture toughness-prediction models. SPE J 2017:1–9
Zhang D, Ranjith PG, Perera MSA (2016) The brittleness indices used in rock mechanics and their application in shale hydraulic fracturing: a review. J Petrol Sci Eng 143:2016
Zhang B, Ji B, Liu W (2017) The study on mechanics of hydraulic fracture propagation direction in shale and numerical simulation. Geomech Geophys Geo-Energy Geo-Resour 1:91–101
Zheng H, Hu Z (2010) Atlas of tectonic and lithofacies palaeogeography in pre-mesozoic in China. Geology Press, Beijing, pp 1–194
Zou CN, Zhu RK, Bai B, Yang Z, Su L, Dong DZ, Li XJ (2011) First discovery of nano-pore throat in oil and gas reservoir in China and its scientific value. Acta Petrol Sin 27(6):1857–1865
Acknowledgements
We greatly appreciate the support of National key research & development plan programs (2017YFB0202900), the National Science Foundation of China (41574125, 41774139) and the Strategic Priority Research of the Chinese Academy of Sciences (XDA14010303). We also acknowledge school of Geosciences, China University of Petroleum (East China) and Rock Mechanic Laboratory, University of Saskatchewan, Saskatoon, Canada for providing lab facilities and technical support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yasin, Q., Du, Q., Sohail, G.M. et al. Fracturing index-based brittleness prediction from geophysical logging data: application to Longmaxi shale. Geomech. Geophys. Geo-energ. Geo-resour. 4, 301–325 (2018). https://doi.org/10.1007/s40948-018-0088-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40948-018-0088-4