Abstract
Oliver Pharr method may overestimate the hardness because of the effect of pile up. In this paper, the mechanical properties of oxide fuel cell, such as hardness and elastic modulus, are determined by a work of indentation, then a reverse analysis algorithms is followed to analyze the yield strength. From the nanoindentation tests carried out for the half-cell structure of solid oxide fuel cells (SOFCs), the typical mechanical properties are derived by the work of indentation and the reverse analysis algorithms. Due to the differences of Young’s modulus and the mismatch of thermal expansion coefficients in the half-cell structure (NiO-YSZ/YSZ), the residual stress, which has effects on the fuel cell’s performance, is aroused during sintering. Numerical results show that the load-displacement curve is agreement with the experimental curve if the residual stress was considered.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
X. Zhao, F. Wang, J. Hang and T. Liu, J. Power. Sources 201 (2012) 231.
K.N. Grew and W.K.S. Chiu. J. Power. Sources 199 (2012) 1.
M.H. Zhao, Y. Xiang and J. Xu, Thin Solid Films 516 (2008) 7571.
W.C. Oliver and G.M. Pharr, J. Mater. Res. 7 (1992) 1564.
W.C. Oliver and G.M. Pharr, J. Mater. Res. 19 (2004) 3.
M.W. Bai, K. Kato, N. Umehara and Y. Miyake, Thin Solid Films 377–378 (2000) 138.
Y.C. Huang, S.Y. Chang and C.S. Chang, Thin Solid Films 517 (2009) 4857.
J.R. Tuck, A.M. Korsunsky, S.J. Bull and R.I. Davidson, Surf. Coat. Technol. 137 (2001) 217.
D. Beegan, S. Chowdhury and M.T. Laugier, Surf. Coat. Technol. 192 (2005) 57.
M.T. Attaf, Mater. Lett. 57 (2003) 4627.
M.T. Attaf, Mater. Lett. 58 (2004) 889.
L. Zhou and Y.X. Yao, Mater. Sci. Eng. A 460–461 (2007) 95.
X. Zhao, F. Wang, X. Wang and Z. Liu, J. Inorg. Mater. 26 (2011) 393.
M.H. Zhao, X. Chen and Y. Xiang, Acta Mater. 55(18) (2007) 6260.
F.H. Wang and Y.L. Zhao, ICEM 2008: International Conference on Experimental Mechanics 2008, Proc. SPIE 7375, Nanjing, China, 2009.
J. Johnson and J.M. Qu, J. Power. Sources 181 (2008) 85.
A.J. Bushby, M.V. Swain, R.C. Bradt, C.A. Brooks and J.L. Roubort, Plastic Deformation of Ceramics, Plenum Press, New York, 1995 p. 231.
M. Lichinchi, C. Lenardi, J. Haupt and R. Vitali, Thin Solid Films 312 (1998) 240.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, X., Wang, F. Elastoplastic properties of solid oxide fuel cell before and after reduction. ACTA METALL SIN 26, 137–142 (2013). https://doi.org/10.1007/s40195-012-0157-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-012-0157-6