Abstract
A multi-crystalline silicon (mc-Si) ingot was grown by the directional solidification (DS) process for photovoltaic (PV) application. We have numerically investigated shear stress and thermal stress for different annealing time and temperature of the directionally solidified mc-Si ingot after the solidification and also we discuss the melt-crystal (m-c) interface during the solidification. Initially the planar m-c interface is observed during the solidification process, after that a slightly convex m-c interface is obtained for the rest of the solidification process. Maximum shear stress has least value at the center region of the mc-Si ingot for 900 K annealing temperature. Maximum shear stress has least value at the peripheral region of the mc-Si ingot for 700 K annealing temperature. The whole mc-Si ingot has lower thermal stress at 700 K annealing temperature. 5 h annealing time is enough to decrease the internal stress of the mc-Si ingot. Increase of the annealing time beyond 5 h does not further decrease the stress significantly.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Wu Z, Zhong G, Zhang Z, Zhou X, Wang Z, Huang X (2015) Optimization of the high-performance multi-crystalline silicon solidification process by insulation partition design using transient global simulations. J Cryst Growth 426:110–116
Lan CW, Yang YM, Yu A, Wu YC, Hsu B, Hsu WC, Yang A (2015) Recent progress of crystal growth technology for multi-crystalline silicon solar ingot. Solid State Phenom 242:21–29
Anandha Babu G, Isao T, Satoru M, Noritaka U (2016) Improved multicrystalline silicon ingot quality using single layer silicon beads coated with silicon nitride as seed layer. J Cryst Growth 441:124–130
Yeh KM, Hseih CK, Hsu WC, Lan CW (2010) High-quality multi-crystalline silicon growth for solar cells by grain-controlled directional solidification. Prog Photovolt Res Appl 18:265–271
Chen XJ, Nakano S, Liu LJ, Kakimoto K (2008) Study on thermal stress in a silicon ingot during a unidirectional solidification process. J Cryst Growth 310:4330–4335
Xi Y, Lv G, Ma W, Xue H, Chen D (2016) The effect of radiative heat transfer characteristics on vacuum directional solidification process of multicrystalline silicon in the vertical Bridgman system. Appl Therm Eng 93:731–741
Gao B, Nakano S, Harada H, Miyamura Y, Sekiguchi T, Kakimoto K (2012) Reduction of polycrystalline grains region near the crucible wall during seeded growth of monocrystalline silicon in a unidirectional solidification furnace. J Cryst Growth 352:47–52
Black A, Medina J, Pineiro A, Dieguez E (2012) Optimizing seeded casting of mono-like silicon crystals through numerical simulation. J Cryst Growth 353:12–16
Xi Y, Ma W, Lv G, Wei K, Luo T, Chen D (2014) A modified vacuum directional solidification system of multicrystalline silicon based on optimizing for heat transfer. J Cryst Growth 400:7–14
Ma W, Zhong G, Sun L, Yu Q, Huang X, Liu L (2012) Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells. Sol Energy Mater Sol Cells 100:231–238
Nagarajan SG, Srinivasan M, Aravinth K, Ramasamy P (2016) Simulation analysis on impurity distribution in mc-Si grown by directional solidification for solar cell applications. Int J Mater Res 107:1–9
Srinivasan M, Karuppasamy P, Ramasamy P, Barua AK (2016) Numerical modelling on stress and dislocation generation in multi-crystalline silicon during directional solidification for PV applications. Electron Mater Lett 12:431–438
Wu J, Li Y, Ma W, Liu K, Wei K, Xie K, Yang B, Dai Y (2014) Impurities removal from metallurgical grade silicon using gas blowing refining techniques. Silicon 6:79–85
Wu J, Liu K, Chen X, Ma W, Yang B, Dai Y (2013) Prediction of covalent interactions between Si and B, Fe, Al or Ca in metallurgical grade silicon using ab initio molecular dynamic simulations. Silicon 7:253–259
Nguyen THT, Liao S-H, Chen J-C, Chen C-H, Huang Y-H, Yang C-J, Lin H-W, Bich NH (2016) Effects of the hot zone design during the growth of large size multi-crystalline silicon ingots by the seeded directional solidification process. J Cryst Growth 452:27–34
Hao Q, Xie X, Wang B, Liu C (2012) Effect of annealing temperature on the properties of silicon crystal. Adv Mater Res 415–417:1323–1326
Gou X, Li X, Ying X U, Liang X, Zhao Y (2009) Effect of thermal annealing on characteristics of polycrystalline silicon used for solar cells. Mater Res Soc Symp Proc 1123:P03–06
Lan CW, Yang CF, Lan A, Yang M, Yu A, Hsu HP, Hsu B, Hsu C (2016) Engineering silicon crystals for photovoltaics. CrystEngComm 18:1474–1485
Fang HS, Wanga S, Zhou L, Zhou NG, Lin MH (2012) Influence of furnace design on the thermal stress during directional solidification of multicrystalline silicon. J Cryst Growth 346:5– 11
Nakano S, Chen XJ, Gao B, Kakimoto K (2011) Numerical analysis of cooling rate dependence on dislocation density in multicrystalline silicon for solar cells. J Cryst Growth 318:280–282
Ding C, Huang M, Zhong G, Ming L, Huang X (2014) A design of crucible susceptor for the seeds preservation during a seeded directional solidification process. J Cryst Growth 387:73–80
Ding C, Huang M, Zhong G, Liu L, Huang X (2014) Movable partition designed for the seed-assisted silicon ingot casting in directional solidification process. Cryst Res Technol 49:405–413
Teng Y-Y, Chen J-C, Huang B-S, Chang C-H (2014) Numerical simulation of impurity transport under the effect of a gas flow guidance device during the growth of multicrystalline silicon ingots by the directional solidification process. J Cryst Growth 385:1–8
Liu L, Yu Q, Qi X, Zhao W, Zhong G (2015) Controlling solidification front shape and thermal stress in growing quasi-single- crystal silicon ingots: process design for seeded directional solidification. Appl Therm Eng 91:225–233
Lv G, Chen D, Yang X, Ma W, Luo T, Wei K, Zhou Y (2015) Numerical simulation and experimental verification of vacuum directional solidification process for multicrystalline silicon. Vacuum 116:96–103
Takahashi I, Usami N, Kutsukake K, Stokkan G, Morishita K, Nakajima K (2010) Generation mechanism of dislocations during directional solidification of multicrystalline silicon using artificially designed seed. J Cryst Growth 312:897–901
Acknowledgements
This work was supported by the Ministry of New and Renewable Energy (MNRE), the Government of India (Order no: 31/58/2013-2014/PVSE & 15-01-2015).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gurusamy, A., Manickam, S., Karuppanan, A. et al. Simulation Studies of Annealing Effect on a mc-Si Ingot for Photovoltaic Application. Silicon 10, 1021–1033 (2018). https://doi.org/10.1007/s12633-017-9565-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-017-9565-6