Abstract
This paper addresses the robot-assisted rehabilitation of back pain, an epidemic health problem affecting a large portion of the population. The design is composed of two springs in series connected to an end-effector via a pair of antagonistic cables. The spring and cable arrangement forms an elastic coupling from the actuator to the output shaft. An input-output torque model of the series-elastic mechanism is established and studied numerically. The study also illustrates the variation of the mechanism’s effective stiffness by changing the springs’ position. In addition, we built a prototype of the robotic mechanism and design experiments with a robotic manipulator to experimentally investigate its dynamic characteristics. The experimental results confirm the predicted elasticity between the input motion and the output torque at the end-effector. We also observe an agreement between the data generated by the torque model and data collected from the experiments. An experiment with a full-scale robot and a human subject is carried out to investigate the human-robot interaction and the mechanism behavior.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Friedly, C. Standaert, and L. Chan, “Epidemiology of spine care: the back pain dilemma,” Physical Medicine and Rehabilitation Clinics, vol. 21, no. 4, pp. 659–677, 2010.
R. van den Berg, M. de Hooge, F. van Gaalen, M. Reijnierse, T. Huizinga, and D. van der Heijde, “Percentage of patients with Spondylarthritis in patients referred because of chronic back pain and performance of classification criteria: experience from the spondyloarthritis caught early (space) cohort,” Rheumatology, vol. 52, no. 8, pp. 1492–1499, 2013.
F. Hofmann, U. Stossel, M. Michaelis, M. Nubling, and A. Siegel, “Low back pain and lumbago-sciatica in nurses and a reference group of clerks: results of a comparative prevalence study in germany,” Proc. of In’l Archives of Occupational and Environmental Health, vol. 75, no. 7, pp. 484–490, 2002.
T. Vos, A. D. Flaxman, M. Naghavi, R. Lozano, C. Michaud, M. Ezzati, et al., “Years lived with disability (ylds) for 1160 sequelae of 289 diseases and injuries 1990–2010: A systematic analysis for the global burden of disease study 2010,” The Lancet, vol. 380, no. 9859, pp. 2163–2196, 2012.
T. M. Manini, S. L. Hong, and B. C. Clark, “Aging and muscle: a neuron’s perspective,” Current Opinion in Clinical Nutrition and Metabolic Care, vol. 16, no. 1, pp. 21–26, 2013.
W. E. Garrett Jr., “Muscle strain injuries,” The American Journal of Sports Medicine, vol. 24, no. 6, pp. S2–S8, 1996.
M. Gore, A. Sadosky, B. R. Stacey, K.-S. Tai, and D. Leslie, “The burden of chronic low back pain: clinical comorbidities, treatment patterns, and health care costs in usual care settings,” Spine, vol. 37, no. 11, pp. 668–677, 2012.
B. I. Martin, R. A. Deyo, S. K. Mirza, J. A. Turner, B. A. Comstock, W. Hollingworth, and S. D. Sullivan, “Expenditures and health status among adults with back and neck problems,” Jama, vol. 299, no. 6, pp. 656–664, 2008.
P. C. Coyte, C. V. Asche, R. Croxford, and B. Chan, “The economic cost of musculoskeletal disorders in canada,” Arthritis and Rheumatism, vol. 11, no. 5, pp. 315–325, 1998.
B. Walker, R. Muller, and W. Grant, “Low back pain in australian adults: the economic burden,” Asia Pacific Journal of Public Health, vol. 15, no. 2, pp. 79–87, 2003.
Y. Henchoz, C. Tetreau, J. Abboud, M. Piche, and M. Descarreaux, “Effects of noxious stimulation and pain expectations on neuromuscular control of the spine in patients with chronic low back pain,” The Spine Journal, vol. 13, no. 10, pp. 1263–1272, 2013.
N. S. Ward and L. G. Cohen, “Mechanisms underlying recovery of motor function after stroke,” Archives of Neurology, vol. 61, no. 12, pp. 1844–1848, 2004.
S. M. McGill, “Low back exercises: evidence for improving exercise regimens,” Physical Therapy, vol. 78, no. 7, pp. 754–765, 1998.
C. Liebenson, Rehabilitation of the Spine a Practitioners Manual, Lippincott Williams and Wilkins, 2007.
N. Schweighofer, Y. Choi, C. Winstein, and J. Gordon, “Task-oriented rehabilitation robotics,” American Journal of Physical Medicine and Rehabilitation, vol. 91, no. 11, pp. S270–S279, 2012.
I. Diaz, J. J. Gil, and E. Sanchez, “Lower-limb robotic rehabilitation: literature review and challenges,” Journal of Robotics, vol. 2011, 2011.
W. Choi, J. Won, H. Cho, and J. Park, “A rehabilitation exercise robot for treating low back pain,” Proc. of IEEE Int’l Conference on Robotics and Automation, pp. 482–489, 2017.
J. Stein, “Robotics in rehabilitation: technology as destiny,” American Journal of Physical Medicine & Rehabilitation, vol. 91, no. 11, pp. S199–S203, 2012.
B. Vanderborght, A. Albu-Schaeffer, A. Bicchib, E. Burdet, D. G. Caldwell, R. Carloni, M. Catalano, O. Eiberger, W. Friedl, G. Ganesh, M. Garabini, M. Grebenstein, G. Grioli, S. Haddadin, H. Hoppner, A. Jafari, M. Laffranchi, D. Lefeber, F. Petit, S. Stramigioli, N. Tsagarakis, M. van Damme, R. van Ham, L. C. Visser, and S. Wolf, “Variable impedance actuators: A review,” Robotics and Autonomous Systems, vol. 61, no. 12, pp. 1601–1614, 2013.
N. Paine, S. Oh, and L. Sentis, “Design and control considerations for high-performance series elastic actuators,” IEEE/ASME Transactions on Mechatronics, vol. 19, no. 3, pp. 1080–1091, 2013.
C. Lee and S. Oh, “Configuration and performance analysis of a compact planetary geared elastic actuator,” Proc. of IEEE Industrial Electronics Society Conf., pp. 6391–6396, 2016.
M. Plooij, M. van Nunspeet, M. Wisse, and H. Vallery, “Design and evaluation of the bi directional clutched parallel elastic actuator (bic-pea),” Proc. of IEEE Int’l Conference on Robotics and Automation, pp. 1002–1009, 2015.
K. Kong, J. Bae, and M. Tomizuka, “A compact rotary series elastic actuator for human assistive systems,” IEEE/ASME Transactions on Mechatronics, vol. 17, no. 2, pp. 288–297, 2011.
B.-S. Kim and J.-B. Song, “Design and control of a variable stiffness actuator based on adjustable moment arm,” IEEE Transactions on Robotics, vol. 28, no. 5, pp. 1145–1151, 2012.
Y. Xin, Z. C. Qin, and J. Q. Sun, “Robust experimental study of data-driven optimal control for an underactuated rotary flexible joint,” International Journal of Control, Automation and Systems, vol. 18, no. 1, pp. 1–13, 2019.
S. Fasoli, H. Krebs, and N. Hogan, “Robotic technology and stroke rehabilitation: translating research into practice,” Topics in Stroke Rehabilitation, vol. 11, no. 4, pp. 11–19, 2004.
P. Lum, D. Reinkensmeyer, and R. Mahoney, “Robotic devices for movement therapy after stroke: current status and challenges to clinical acceptance,” Topics in Stroke Rehabilitation, vol. 8, no. 4, pp. 40–53, 2002.
C. A. Stanger, C. Anglin, W. S. Harwin, “Devices for assisting manipulation: a summary of user task priorities,” IEEE Transactions on Rehabilitation Engineering, vol. 2, no. 4, pp. 256–265, 1994.
Z. Shen, Y. Zhuang, J. Zhou, J. Gao, and R. Song, “Design and test of admittance control with inner adaptive robust position control for a lower limb rehabilitation robot,” International Journal of Control, Automation and Systems, vol. 18, no. 1, pp. 134–142, 2020.
M. Lee, M. Rittenhouse, and H. A. Abdullah “Design issues for therapeutic robot systems: results from a survey of physiotherapists,” Journal of Intelligent and Robotic Systems, vol. 42, no. 3, pp. 239–252, 2005.
B. Kim, “Analysis on effective rehabilitation of human arms using compliant strap,” Int’l Journal of Control, Automation and Systems, vol. 16, no. 6, pp. 2958–2965, 2018.
C. Larivière, R. da Silva, A. B. Arsenault, S. Nadeau, A. Plamondon, and R. Vadeboncoeur, “Specificity of a back muscle exercise machine in healthy and low back pain subjects,” Medicine and Science in Sports and Exercise, vol. 42, no. 3, pp. 592–599, 2010.
W. Choi, J. Won, H. Cho, and J. Park, “A rehabilitation exercise robot for treating low back pain.” Proc. of IEEE Int’l Conference on Robotics and Automation, pp. 482–489, 2017.
J. M. Hart, J. M. Fritz, D. C. Kerrigan, E. N. Saliba, B. M. Gansneder, and C. D. Ingersoll, “Quadriceps inhibition after repetitive lumbar extension exercise in persons with a history of low back pain,” J. Athletic Training, vol. 41, no. 3, pp. 264–269, 2006.
N. Kofotolis, E. Kellis, S. P. Vlachopoulos, I. Gouitas, and Y. Theodorakis “Effects of Pilates and trunk strengthening exercises on health-related quality of life in women with chronic low back pain,” Journal of Back and Musculoskeletal Rehabilitation, vol. 29, no. 4, pp. 649–659, 2016.
R. van Ham, M. van Damme, B. Vanderborght, B. Verrelst, and D. Lefeber, “Maccepa: The mechanically adjustable compliance and controllable equilibrium position actuator,” Proceedings of CLAWAR, pp. 196–203. 2006.
M. M. R. Hutten and H. J. Hermens “Reliability of lumbar dynamometry measurements in patients with chronic low back pain with test-retest measurements on different days,” European Spine Journal, vol. 6, no. 1, pp. 54–62, 1997.
B. Hwang and D. Jeon “Estimation of the user’s muscular torque for an over-ground gait rehabilitation robot using torque and insole pressure sensors,” Journal of Control, Automation and Systems, vol. 16, no. 1, pp. 275–283, 2018.
P. Cordo, V. S. Gurfinkel, T. C. Smith, P. W. Hodges, S. M. P. Verschueren, and S. Brumagne, “The sit-up: complex kinematics and muscle activity in voluntary axial movement,” J. Electromyography and Kinesiology, vol. 13, no. 3, pp. 239–252, 2003.
Z. Li, C. Y. Su, G. Li, and H. Su “Fuzzy approximation-based adaptive backstepping control of an exoskeleton for human upper limbs,” IEEE Transactions on Fuzzy Systems, vol. 23, no. 3, pp. 555–566, 2014.
H. Su, J. Sandoval, P. Vieyres, G. Poisson, G. Ferrigno, and E. de Momi, “Safety-enhanced collaborative framework for tele-operated minimally invasive surgery using a 7-DoF torque-controlled robot,” International Journal of Control, Automation and Systems, vol. 16, no. 6, pp. 2915–2923, 2018.
K. D. Nguyen and H. Dankowicz, “Cooperative control of networked robots on a dynamic platform in the presence of communication delays,” Journal of Robust and Nonlinear Control, vol. 27, no. 9, pp. 1433–1461, 2017.
K. D. Nguyen, Y. Li, and H. Dankowicz, “Delay robustness of an L1 adaptive controller for a class of systems with unknown matched nonlinearities,” IEEE Trans. on Automatic Control, vol. 63, no. 10, pp. 5485–5491, 2017.
K. D. Nguyen, “A predictor-based model reference adaptive controller for time-delay systems,” IEEE Trans. on Automatic Control, vol. 63, no. 12, pp. 4375–4382, 2018.
K. D. Nguyen and H. Dankowicz, “Input-delay compensation in a robust adaptive control framework,” IET Control Theory & Applications, vol. 13, no. 11, pp. 1718–1727, 2019.
K. D. Nguyen, “Uniform continuity and delay robustness of an adaptive controller for Lagrangian systems,” IMA J. of Mathematical Control and Information, vol. 37, no. 2, pp. 555–584, 2020.
K. D. Nguyen, “An adaptive compensator for uncertain nonlinear systems with multiple time delays” Automatica, vol. 117, 108976, 2020.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Recommended by Associate Editor Yangmin Li under the direction of Editor Doo Yong Lee. This work is supported by the FY20 Competitive Research Grant Program of South Dakota Board of Regents.
ElHussein Shata received his B.S. and M.S. degrees in mechanical engineering from South Dakota State University (SDSU), USA, in 2016 and 2020, respectively. His research interests include variable stiffness actuators, classical control systems, and machine design.
Kim-Doang Nguyen is an Assistant Professor in the Department of Mechanical Engineering at SDSU. He received his Ph.D. degree in mechanical engineering from the University of Illinois at Urbana Champaign (UIUC) in 2015. Between 2015 and 2017, he was a postdoctoral scientist at UIUC and the University of Technology Sydney, Australia. His research interests include control theory, time-delay systems, and robotics.
Praneel Acharya received his B.E. degree from Nanjing University of Aeronautics and Astronautics in 2017. He is currently pursuing a Ph.D. degree in mechanical engineering at SDSU. His research interests include robotic manipulation, motion planning, control, and computer vision.
Jeffrey Doom received his Ph.D. degree from University of Minnesota in 2009. He is currently an Assistant Professor in mechanical engineering at SDSU. His research interests include computational fluid dynamics, fluid mechanics, and modeling and simulation.
Rights and permissions
About this article
Cite this article
Shata, E., Nguyen, KD., Acharya, P. et al. A Series-elastic Robot for Back-pain Rehabilitation. Int. J. Control Autom. Syst. 19, 1054–1064 (2021). https://doi.org/10.1007/s12555-019-0859-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12555-019-0859-x