Abstract
In this study, the performance of five-DOF motion in ultra-precision linear stage is evaluated accurately by extending the application of the ISO 230-2 International Standard, which is focused only on the linear displacement motion of a linear stage. The bidirectional accuracy and bidirectional repeatability of positioning in five-DOF motion are calculated by measured geometric errors. Five geometric errors except for the linear displacement error of a linear stage are measured simultaneously using the optimal measurement system, which is designed to enhance the standard uncertainty of the estimated geometric errors. The geometric errors are in good agreement with those from the laser interferometer. In addition, the confidence intervals of the performances are determined by the uncertainties of the equipment used in the experiment.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ISO 230-1, “Test Code for Machine Tools-part 1: Geometric Accuracy of Machines Operating under No-load or Finishing Conditions,” 1996.
Yang, S., Yuan, J., and Ni, J., “Accuracy Enhancement of a Horizontal Machining Center by Real-Time Error Compensation,” Journal of Manufacturing Systems, Vol. 15, No. 2, pp. 113–124, 1996.
Kim, H. S., Lee, K. I., Lee, K. M., and Bang, Y. B., “Fabrication of Free-Form Surfaces using a Long-Stroke Fast Tool Servo and Corrective Figuring with On-Machine Measurement,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 12–13, pp. 991–997, 2009.
Kiridena, V. S. B. and Ferreira, P. M., “Kinematic Modeling of Quasistatic Errors of Three-Axis Machining Centers,” International Journal of Machine Tools and Manufacture, Vol. 34, No. 1, pp. 85–100, 1994.
Yang, S. H., Kim, K. H., Park, Y. K., and Lee, S. G., “Error Analysis and Compensation for the Volumetric Errors of a Vertical Machining Centre using a Hemispherical Helix Ball Bar Test,” International Journal of Advanced Manufacturing Technology, Vol. 23, No. 7–8, pp. 495–500, 2004.
Chen, X. B., Geddam, A., and Yuan, Z. J., “Accuracy Improvement of Three-Axis CNC Machining Centers by Quasi-Static Error Compensation,” Journal of Manufacturing Systems, Vol. 16, No. 5, pp. 323–336, 1997.
Kim, H. S., Kim, E. J., and Song, B. S., “Diamond Turning of Large Off-Axis Aspheric Mirrors using a Fast Tool Servo with On-Machine Measurement,” Journal of Materials Processing Technology, Vol. 146, No. 3, pp. 349–355, 2004.
Dow, T. A., Miller, M. H., and Falter, P. J., “Application of a Fast Tool Servo for Diamond Turning of Nonrotationally Symmetric Surfaces,” Precision Engineering, Vol. 13, No. 4, pp. 243–250, 1991.
Lee, D. M., Zhu, Z., Lee, K. I., and Yang, S. H., “Identification and Measurement of Geometric Errors for a Five-Axis Machine Tool with a Tilting Head using a Double Ball-Bar,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 337–343, 2011.
Lee, K. I. and Yang, S. H., “Robust Measurement Method and Uncertainty Analysis for Position-Independent Geometric Errors of a Rotary Axis using a Double Ball-Bar,” Int. J. Precis. Eng. Manuf., Vol. 14, No. 2, pp. 231–239, 2013.
Lee, D. M. and Yang, S. H., “Mathematical Approach and General Formulation for Error Synthesis Modeling of Multi-Axis System,” International Journal of Modern Physics B, Vol. 24, No. 15–16, pp. 2737–2742, 2010.
Park, S. R. and Yang, S. H., “Design of a 5-axis Machine Tool Considering Geometric Errors,” International Journal of Modern Physics B, Vol. 24, No. 15–16, pp. 2484–2489, 2010.
Fan, K. C., Chen, M. J., and Huang, W. M., “A Six-Degree-of-Freedom Measurement System for the Motion Accuracy of Linear Stages,” International Journal of Machine Tools and Manufacture, Vol. 38, No. 3, pp. 155–164, 1998.
Huang, P. S. and Ni, J., “On-Line Error Compensation of Coordinate Measuring Machines,” International Journal of Machine Tools and Manufacture, Vol. 35, No. 5, pp. 725–738, 1995.
Lee, J. H., Liu, Y., and Yang, S. H., “Accuracy Improvement of Miniaturized Machine Tool: Geometric Error Modeling and Compensation,” International Journal of Machine Tools and Manufacture, Vol. 46, No. 12–13, pp. 1508–1516, 2006.
Lee, K. I., Lee, J. C., and Yang, S. H., “The Optimal Design of a Measurement System to Measure the Geometric Errors of Linear Axes,” International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1–4, pp. 141–149, 2013.
ISO 230-2, “Test Code for Machine Tools-part 2: Determination of Accuracy and Repeatability of Positioning Numerically Controlled Axes,” 2006.
ISO/IEC GUIDE 98-3, “Uncertainty of Measurement-part 3: Guide to the Expression of Uncertainty in Measurement (GUM:1995),” 2008.
ISO/TR 230-9, “Test Code for Machine Tool-Part 9: Estimation of Measurement Uncertainty for Machine Tool Tests according to Series ISO 230, Basic Equation,” 2005.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, KI., Lee, JC. & Yang, SH. Performance evaluation of five-DOF motion in ultra-precision linear stage. Int. J. Precis. Eng. Manuf. 15, 129–134 (2014). https://doi.org/10.1007/s12541-013-0315-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0315-4