Abstract
This work deals with the identification of constitutive parameters by inverse methodology. Two different approaches are presented and analysed: the single-point and FE analysis. The use of these two different methodologies for the evaluation of objective functions in the identification process is still an open question and the interest in this field has been increasing among the metal forming community. To discuss this issue, two different constitutive models suitable for metals were used, i.e. an elastoplastic hardening model and an elastoplastic model with isotropic and kinematic hardening. The determined material parameters for the two models, the respective objective function values and the CPU time required to perform the simulations are presented and discussed.
Article PDF
Avoid common mistakes on your manuscript.
References
J. Ponthot, J. Kleinermann, A cascade optimization methodology for automatic parameter identification and shape/process optimization in metal forming simulation, Comp. Methods in Applied Mechanics and Engineering. Vol 195 (41-43), 5472-5508, 2006.
A. Andrade-Campos, P. Pilvin, F. Teixeira-Dias, J. Simões, Determinação dos parâmetros constitutivos atraves de metodologias de optimização em cascata, Proc. of CMNE/CILAMCE, Portugal, a1063, 2007.
R. de-Carvalho, R.A.F. Valente and A. Andrade-Campos, Optimization Strategies for Non-Linear Material Parameters Identification in Metal Forming Problems, Proc. of ESMC2009,7-11 Setembro, IST, Lisbon, 2009.
A. Andrade-Campos, P. Pilvin, J. Simões, F. Teixeira-Dias, Software development for inverse determination of constitutive model parameters, Software Engineering: New Research, Nova Science Publishers, Inc.
S. Thuillier, P. Manach, Comparison of the work-hardening of metallic sheets using tensile and shear strains paths, International Journal of Plasticity, 733-751, 2009.
J. Lemaitre, J. Chaboche, Mécanique des matériaux solides, Editions Dunod, Paris-France, 1996.
Abaqus, 2007. Abaqus v6.7 (2007) Simulia Inc, Dassault Systémes.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
de-Carvalho, R., Valente, R.A.F. & Andrade-Campos, A. On the Objective Function Evaluation in Parameter Identification of Material Constitutive Models - Single-point or FE Analysis. Int J Mater Form 3 (Suppl 1), 33–36 (2010). https://doi.org/10.1007/s12289-010-0700-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-010-0700-9