Abstract
It is well known that the passive strategies applying in traditional buildings respond satisfactory to climatic requirements and succeed to provide maximum indoor comfort with minimum energy consumption. From this point of view, it is interesting to quantitatively assess the effectiveness of the vernacular strategies to improve the environmental performance of the building’s envelope under desert climate conditions. The research tries to address this issue and was undertaken in southern Algeria where a very hot and arid climate prevails. The effect of some selected passive cooling strategies on enhancing the building’s envelope climate performance was examined. These strategies are inspired from the local vernacular architecture, and they are expected to provide satisfactory indoor thermal comfort for users and to reduce the energy cooling demand from residential buildings. Applying field and computational investigations, two existing residential buildings were tested: a typical residential unit and a contemporary vernacular (neo-vernacular) building. In the latter, climate responsive strategies inspired from vernacular architecture were applied. A comparison based on site measurements was carried out on the two selected buildings which differ from their envelope design properties and components.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Alrashed F, Asif M, Burek S (2017). The role of vernacular construction techniques and materials for developing zero-energy homes in various desert climates. Buildings, 7(4): 17.
Al-Sallal KA, Rahmani M (2019). Vernacular architecture in the MENA region: Review of bioclimatic strategies and analysis of case studies. In: Sayigh A (ed), Sustainable Vernacular Architecture. Cham, Switzerland: Springer.
Ameur M, Kharbouch Y, Mimet A (2020). Optimization of passive design features for a naturally ventilated residential building according to the bioclimatic architecture concept and considering the northern Morocco climate. Building Simulation, 13: 677–689.
ANIREF (n.d.). EL Oued’s Monograph. National Agency for Land Intermediation and Regulation. (in French)
ANSI/ASHRAE (2014). ASHRAE Guideline 14-2014: Measurement of Energy, Demand, and Water Savings. Atlanta, GA, USA: American Society of Heating Refrigerating and Air-Conditioning Engineers.
Bekkouche SMA, Benouaz T, Cherier MK, et al. (2014). Thermal resistances of local building materials and their effect upon the interior temperatures case of a building located in Ghardaïa region. Construction and Building Materials, 52: 59–70.
Benchekroun M, Chergui S, Ruggiero F, et al. (2019). Indoor microclimate conditions and the impact of transformations on hygrothermal comfort in the old ottoman houses in Algiers. International Journal of Architectural Heritage, 14: 1296–1319.
Bienvenido-Huertas D, Sanchez-García D, Pérez-Fargallo A, et al. (2020). Optimization of energy saving with adaptive setpoint temperatures by calculating the prevailing mean outdoor air temperature. Building and Environment, 170: 106612.
Bodach S, Lang W, Hamhaber J (2014). Climate responsive building design strategies of vernacular architecture in Nepal. Energy and Buildings, 81: 227–242.
Born FJ, Clarke JA, Johnstone CM (2001). Development and demonstration of a renewable energy based energy demand/supply decision support tool for the building design profession. In: Proceedings of the 7th International IBPSA Building Simulation Conference, Rio de Janeiro, Brazil.
Bouchair A, Tebbouche H, Hammouni A, et al. (2013). Compact cities as a response to the challenging local environmental constraints in hot arid lands of Algeria. Energy Procedia, 42: 493–502.
Dubois MC (2001). Impact of shading devices on daylight quality in offices. PhD thesis, Lund University, Sweden.
El Jaouhari K, Amhamdi L, Bouayad L, et al. (2019). De la fenêtre traditionnelle à la facade intelligente: Transcription du Moucharabieh en architecture contemporaine. African and Mediterranean Journal of Architecture and Urbanism, 1: 67–79. (in French)
EN ISO 7726 (2001). Ergonomics of the Thermal Environment Instruments for Measuring Physical Quantities. Geneva: International Standardisation Organisation.
Faghih AK, Bahadori MN (2011). Thermal performance evaluation of domed roofs. Energy and Buildings, 43: 1254–1263.
Fathy H (1973). Architecture for the Poor: An Experiment in Rural Egypt. Chicago: University of Chicago Press.
Givoni B (1978). L’homme, l’architecture et le climat. Paris: Editions du moniteur.
Hadavand M, Yaghoubi M, Emdad H (2008). Thermal analysis of vaulted roofs. Energy and Buildings, 40: 265–275.
Harvey LDD (2009). Reducing energy use in the buildings sector: measures, costs, and examples. Energy Efficiency, 2: 139–163.
Hong T, Langevin J, Sun K (2018). Building simulation: Ten challenges. Building Simulation, 11: 871–898.
Huang L, Zhai ZJ (2020). Critical review and quantitative evaluation of indoor thermal comfort indices and models incorporating solar radiation effects. Energy and Buildings, 224: 110204.
Huerto-Cardenas HE, Leonforte F, Aste N, et al. (2020). Validation of dynamic hygrothermal simulation models for historical buildings: State of the art, research challenges and recommendations. Building and Environment, 180: 107081.
Hussain S, Oosthuizen PH (2012). Validation of numerical modeling of conditions in an atrium space with a hybrid ventilation system. Building and Environment, 52: 152–161.
Kersenna S, Chaouche S (2018). When the neo-vernacular architecture inspires the contemporary conception. In: Proceedings of SosTierra 2017, Valencia, Spain.
Koch-Nielsen H (2013). Stay Cool: A Design Guide for the Built Environment in Hot Climates. New York: Routledge.
Konya A (1980). Design Primer for Hot Climate. London: Architectural Press.
Leo Samuel DG, Dharmasastha K, Shiva Nagendra SM, et al. (2017). Thermal comfort in traditional buildings composed of local and modern construction materials. International Journal of Sustainable Built Environment, 6: 463–475.
Li Z, Chowb DHC, Yao J, et al. (2019). The effectiveness of adding horizontal greening and vertical greening to courtyard areas of existing buildings in the hot summer cold winter region of China: A case study for Ningbo. Energy and Buildings, 196: 227–239.
Liébard A, De Herde A (2006). Traité D’architecture et D’urbanisme Bioclimattiques: Concevoir, édifier et aménager avec le développement durable. Observ’ER (Observatoire des énergies renouvelables). (in French)
Mahar WA, Verbeeck G, Singh MK, et al. (2019). An investigation of thermal comfort of houses in dry and semi-arid climates of Quetta, Pakistan. Sustainability, 11: 5203.
Maile T, Bazjanac V, Fischer M (2012). A method to compare simulated and measured data to assess building energy performance. Building and Environment, 56: 241–251.
Mohamed E, Riffat S, Omer S (2017). Low-temperature solar-plate-assisted heat pump: a developed design for domestic applications in cold climate. International Journal of Refrigeration, 81: 134–150.
Mwasha A, Williams RG, Iwaro J (2011). Modeling the performance of residential building envelope: The role of sustainable energy performance indicators. Energy and Buildings, 43: 2108–2117.
Najafi SMA, Yaghoubi M (2015). Thermal study of a cistern’s dome (the case of Motamed cistern in Lar, Iran). Energy and Buildings, 102: 453–466.
Rais M, Boumerzoug A, Halada M, et al. (2019). Optimizing the cooling energy consumption by the passive traditional facade strategies in hot dry climate. Pollack Periodica, 14: 177–188.
Sadineni SB, Madala S, Boehm RF (2006). Passive building energy savings: A review of building envelope components. Building and Environment, 41: 268–276.
Salama A (2001). On-site Technical Review Report: 400 Units Housing Project El Oued, Algeria. 2001 Technical Review Summary.
Samy L, Hamid M, Bert B, et al. (2019). Impact of exterior convective heat transfer coefficient models on the energy demand prediction of buildings with different geometry. Building Simulation, 12: 797–816.
Semahi S, Zemmouri N, Singh M, et al. (2019). Comparative bioclimatic approach for comfort and passive heating and cooling strategies in Algeria. Building and Environment, 161: 106271.
Sghiouri H, Charai M, Mezrhab A, et al. (2020). Comparison of passive cooling techniques in reducing overheating of clay-straw building in semi-arid climate. Building Simulation, 13: 65–88.
Stazi F, Tomassoni E, Bonfigli C, et al. (2014). Energy, comfort and environmental assessment of different building envelope techniques in a Mediterranean climate with a hot dry summer. Applied Energy, 134: 176–196.
Stefanizzi P, Fato I, di Turi SD (2016). Energy and environmental performance of Trullo stone building. An experimental and numerical survey. International Journal of Heat and Technology, 34: S396–S402.
Tang R, Meir IA, Wu T (2006). Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs. Building and Environment, 41: 268–276.
Tindale A (2015). DesignBuilder and EnergyPlus. DesignBuilder Software Ltd, Building Simulation User News 25.
Wasilowski HA, Reinhart CF (2009). Modelling an existing building in DesignBuilder/EnergyPlus: Custom versus default inputs. In: Proceedings of the 11th International IBPSA Building Simulation Conference, Glasgow, UK.
Williamson TY (1995). A confirmation technique for thermal performance simulation models. In: Proceedings of the 4th International IBPSA Building Simulation Conference, Madison, WI, USA.
Zeinelabdein R, Siddig O, Mohamed E, et al. (2017). Free cooling based phase change material for domestic buildings in hot arid climate. In: Proceeidngs of the 16th International Conference on Sustainable Energy Technologies, Bologna, Italy.
Zeinelabdein R, Omer S, Gan G (2019). Experimental performance of latent thermal energy storage for sustainable cooling of buildings in hot-arid regions. Energy and Buildings, 186: 169–185.
Zhang L (2014). Simulation analysis of built environment based on design builder software. Applied Mechanics and Materials, 580–583: 3134–3137.
Zhang J, Liu N, Wang S (2020). A parametric approach for performance optimization of residential building design in Beijing. Building Simulation, 13: 223–235.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Amraoui, K., Sriti, L., Di Turi, S. et al. Exploring building’s envelope thermal behavior of the neo-vernacular residential architecture in a hot and dry climate region of Algeria. Build. Simul. 14, 1567–1584 (2021). https://doi.org/10.1007/s12273-021-0764-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-021-0764-0