Abstract
Currently, energy performance indicators for buildings are associated with the primary energy source consumption, CO2 emissions or net energy distribution, which together set the building’s energy efficiency. The evaluation is frequently based on setpoint temperatures and hours of operation. However, these fixed parameters are not suitable for social housing simulation as their performance tends to be in free running, excluding extremely cold or warm conditions. Therefore, a more successful assessment for the efficiency of these buildings is the users’ capability to live within adaptive comfort ranges without air conditioning systems. The aim of this research is to analyze new Chilean standards for sustainable social housing in the context of climate change using the adaptive comfort approach addressed in EN 15251:2007. Using EnergyPlus simulation software, 16 parametric series are analyzed for current conditions and validated against on-site measurements. Meanwhile, a prediction for the climate in 2050 has also been taken into account. The case study is the most widespread low cost dwelling model. The study demonstrates that the period of time within thermal comfort conditions varies substantially if analysis is done using the adaptive comfort standard or the Sustainable Construction Code (CCS) for Chilean housing. Considering climate change, the percentage of time fluctuates from −19.00% to 24.30%. Concluding that the adaptive comfort model has a greater capacity to positively assess indoor temperatures for social housing in Central-Southern Chile. This research also establishes that it is possible to provide homes where standards are improved within comfort conditions without using artificial means, 99.67% of the time currently and 88.89% in the future.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ANSI/ASHRAE (2014). ASHRAE Guideline 14-2014: Measurement of Energy and Demand Savings. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air Conditioning Engineers.
ASHRAE (2013). ASHRAE Standard 55-2013: Thermal Environmental Conditions for Human Occupancy. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air Conditioning Engineers.
Attia S, Carlucci S (2015). Impact of different thermal comfort models on zero energy residential buildings in hot climate. Energy and Buildings, 102: 117–128.
Belcher SE, Hacker JN, Powell DS (2005). Constructing design weather data for future climates. Building Services Engineering Research and Technology, 26: 49–61.
Building Research Establishment (2016). Código de Construcción Sustentable. Available at http://csustentable.minvu.cl/consultapublica. Accessed 12 May 2016.
Bustamante W, Cepeda R, Martínez P, Santa María H (2009). Eficiencia energética en vivienda social: un desafío posible. In: Camino al Bicentenario: Propuestas para Chile. pp. 253–282. (in Spanish).
CEN (2007a). EN 15217:2007 Energy performance of building. Methods for expressing energy performance and for energy certification of building. Brussels: European Committee for Standardization.
CEN (2007b). EN 15251:2007 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor quality, thermal environment, lighting and acoustics. Brussels: European Committee for Standardization.
CEN (2008). EN 15603:2008 Energy performance of building. Overaall energy use and definition of energy ratings. Brussels: European Committee for Standardization.
Chow DHC (2012). The potential impact of climate change on heating and cooling loads for office buildings in the Yangtze River Delta. International Journal of Low-Carbon Technologies, 7: 234–247.
CITEC UBB; DECON UC (2012). Manual de hermeticidad al aire de edificaciones. Concepción, Chile: Fondef. (in Spanish.
Edenhofer O, Pichs-Madruga R, Sokona Y, Agrawala S, Bashmakov IA, et al. (2014). Summary for policymakers. In: Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change.
European Commission (2002). Directive 2002/91/EC of the European Parliament and of the council of 16 December 2002 on the energy performance of buildings. Official Journal of the European Union, L1, 4-1-2003, pp. 65–71.
European Commission (2010). Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings. Official Journal of the European Union, L153, 18-6-2010, pp. 13–35.
Figueroa R, Bobadilla A, Besser D, Días M, Arriagada R, Espinoza R (2013). Air infiltration in Chilean housing—A baseline determination. In: Proceedings of the 29th Conference on Passive-Low Energy Architecture (PLEA): Sustainable Architecture for a Renewable Future, Munich, Germany.
Guan L (2009). Preparation of future weather data to study the impact of climate change on buildings. Building and Environment, 44: 793–800.
Humphreys M (1978). Outdoor temperatures and comfort indoors. Batiment International, Building Research and Practice, 6: 92–92.
Humphreys MA, Rijal HB, Nicol JF (2013). Updating the adaptive relation between climate and comfort indoors; new insights and an extended database. Building and Environment, 63: 40–55.
IEA (2013). World Energy Outlook 2013. Paris: International Energy Agency.
IPCC (2014). Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Available at http://www.ipcc.ch/pdf/assessment-report/ar5/syr/AR5_SYR_FI NAL_SPM.pdf. Accessed 14 May 2016.
ISO (2004). ISO 8996:2004 Ergonomics of the thermal environment—Determination of metabolic rate. Geneva: International Organization for Standardization.
ISO (2007). ISO 9920:2007 Ergonomics of the thermal environment—Estimation of thermal insulation and water vapour resistance of a clothing ensemble. Geneva: International Organization for Standardization.
ISO (2008). EN ISO 13790:2008 Energy performance of buildings—Calculation of energy use for space heating and cooling. Geneva: International Organization for Standardization.
Jentsch MF, Bahaj AS, James PAB (2008). Climate change future proofing of buildings—Generation and assessment of building simulation weather files. Energy and Buildings, 40: 2148–2168.
Jentsch MF, James PAB, Bourikas L, Bahaj AS (2013). Transforming existing weather data for worldwide locations to enable energy and building performance simulation under future climates. Renewable Energy, 55: 514–524.
Kunkel S, Kontonasiou E, Arcipowska A, Mariottini F, Atanasiu B (2015). Indoor air quality thermal comfort and daylight. Analysis of residential building regulations in eight EU member states. Brussels: Buildings Performance Institute Europe (BPIE).
McCartney KJ, Nicol JF (2002). Developing an adaptive control algorithm for Europe. Energy and Buildings, 34: 623–635.
Met Office (2016). UK’s National Weather Service. Available at http://www.metoffice.gov.uk/about-us/contact. Accessed 15 May 2016.
MINVU (1992). Artículo 4.1.10. Exigencias de acondicionamiento térmico de la Ordenanza general de urbanismo y construcciones. In: DS 47 Ordenanza general de la ley general de urbanismo y construcciones. Santiago, Chile: Ministerio de vivienda y urbanismo (MINVU). (in Spanish.
MINVU (2011a). DS 01. REGLAMENTO DEL SISTEMA INTEGRADO DE SUBSIDIO HABITACIONAL. Santiago, Chile: Ministerio de vivienda y urbanismo (MINVU). (in Spanish.
MINVU (2011b). DS 49. REGLAMENTO DEL PROGRAMA FONDO SOLIDARIO DE ELECCIÓN DE VIVIENDA. Santiago, Chile: Ministerio de vivienda y urbanismo (MINVU). (in Spanish.
MINVU (2016a). Estadisticas históricas. Available at http://www.observatoriohabitacional.cl. Accessed 28 Apr 2016.
MINVU (2016b). Viviendas de modalidad Construcción en Sitio Propio con Proyecto Tipo. Available at http://www.minvu.cl/opensite_ 20100902163054.aspx. Accessed 11 May 2016.
Mylona A (2012). The use of UKCP09 to produce weather files for building simulation. Building Services Engineering Research and Technology, 33: 51–62.
Nicol F (2007). Comfort and energy use in buildings—Getting them right. Energy and Buildings, 39: 737–739.
Nicol JF, Humphreys MA (2002). Adaptive thermal comfort and sustainable thermal standards for buildings. Energy and Buildings, 34: 563–572.
Pérez Fargallo A, Flores Alés V, Calama Rodríguez JM (2015). Comparison of Energy-Saving Restoration Costs Based on Spain’s Initial Constraints [Single-Family Zone B4]. Revista de La Construcción, 14(2): 44–50.
Pérez Fargallo A, Calama Rodríguez J, Flores Alés V (2016). Comparativa de resultados de rehabilitación energética para viviendas en función del grado de mejora. Informes de La Construcción, 68(541): e134. (in Spanish).
Programa de Estudios e Investigaciones en Energía (PRIEN) (2008). Estimación del potencial de ahorro de energía, mediante mejoramientos de la eficiencia energética de los distintos sectores. Available at http://old.acee.cl/576/articles-59078_doc_pdf.pdf. Accessed 14 May 2016. (in Spanish)
Royapoor M, Roskilly T (2015). Building model calibration using energy and environmental data. Energy and Buildings, 94: 109–120.
Santamouris M (2016). Innovating to zero the building sector in Europe: Minimising the energy consumption, eradication of the energy poverty and mitigating the local climate change. Solar Energy, 128: 61–94.
UNEP (2012). Building Design and Construction: Forging Resource Efficiency and Sustainable Development. United Nations Environment Programme.
Acknowledgements
The authors belong to the Sustainable Architecture and Construction Research Group (GACS) at the University of the Bío-Bío and would like to acknowledge that this paper is part of the FONDECYT research project 3160806 “Study of the feasible energy improvement standard for social housing in fuel poverty by means of post occupational adaptive comfort assessment and its progressive implementation” funded by the Chilean National Commission for Research in Science and Technology.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rubio-Bellido, C., Pérez-Fargallo, A., Pulido-Arcas, J.A. et al. Application of adaptive comfort behaviors in Chilean social housing standards under the influence of climate change. Build. Simul. 10, 933–947 (2017). https://doi.org/10.1007/s12273-017-0385-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-017-0385-9