Abstract
Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) is a biodegradable, biocompatible, and non-toxic biopolymer. The biopolymer properties can be improved using cellulosic-based materials, often derived from agro-industrial residues, and promoting reuse/re-significance of a by-product for bone tissue engineering applications. Biocomposites of PHBV filled with bleached fibers of palm residues (BFPR) (0–10 % wt/wt) for 3D-printing were prepared. The scaffolds were obtained by additive manufacturing (fused deposition modeling (FDM)). The samples were characterized by stereomicroscopy, SEM, TGA, nanohardness, wettability, FTIR, and biocompatibility. Biocomposites filaments revealed homogeneous diameters, suitable for FDM. Composite filaments had thermal stability at 100–250 °C (processing did not degrade the material). The -OH groups of cellulose (enhanced by bleaching treatment) BFPR added to PHBV had advantages: optimal cell viability, wettability improvement, and slight nanohardness increase. PHBV/BFPR1 % scaffolds had an interconnected porous structure with a pore size of ~900 µm and 60 % filling.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
C. Meng, J. Zhao, Y. Yin, J. Luo, L. Zhao, W. Jiang, and J. Feng, Fiber. Polym., 21, 709 (2020).
E. L. Cyphert, M. Bil, H. A. von Recum, and W. Święszkowski, J. Biomed. Mater. Res. — Part A, 108, 1144 (2020).
S. Radhakrishnan, S. Nagarajan, M. Bechelany, and S. N. Kalkura in “Processes and Phenomena on the Boundary Between Biogenic and Abiogenic Nature” (O. Frank-Kamenetskaya, D. Vlasov, E. Panova, and S. Lessovaia Eds.), pp.3–19, Springer, Cham, 2020.
V. K. Balla, K. H. Kate, J. Satyavolu, P. Singh, and J. G. D. Tadimeti, Compos. Part B Eng., 174, 106956 (2019).
G. Choi and S. Kim, Fiber. Polym., 17, 977 (2016).
S. Xia, Z. Song, P. Jeyakumar, S. M. Shaheen, J. Rinklebe, Y. S. Ok, N. Bolan, and H. Wang, Crit. Rev. Environ. Sci. Technol., 49, 1027 (2019).
A. I. Aghmiuni, M. S. Baei, S. H. Keshel, and A. A. Khiyavi, Fiber. Polym., 21, 33 (2020).
G. R. de Almeida Neto, M. V. Barcelos, M. E. A. Ribeiro, M. M. Folly, and R. J. S. Rodriguez, Mater. Sci. Eng. C, 104, 110004 (2019).
T. L. de A. Montanheiro, F. H. Cristóvan, J. P. B. Machado, D. B. Tada, N. Durán, and A. P. Lemes, J. Mater. Res., 30, 55 (2014).
M. L. Tebaldi, A. L. C. Maia, F. Poletto, F. V. de Andrade, and D. C. F. Soares, J. Drug Deliv. Sci. Technol., 51, 115 (2019).
S. H. Diermann, M. Lu, G. Edwards, M. Dargusch, and H. Huang, J. Biomed. Mater. Res. — Part A, 107, 154 (2019).
A. Anžlovar, A. Kržan, and E. Žagar, Arab. J. Chem., 11, 343 (2018).
L. J. Vandi, C. M. Chan, A. Werker, D. Richardson, B. Laycock, and S. Pratt, Polym. Degrad. Stab., doi: https://doi.org/10.1016/j.polymdegradstab.2018.10.015 (2019).
E. Diabor, P. Funkenbusch, and E. E. Kaufmann, Fiber. Polym., 20, 217 (2019).
L. N. Ludueña, A. Vecchio, P. M. Stefani, and V. A. Alvarez, Fiber. Polym., 14, 1118 (2013).
C. C. Hernandez, F. F. Ferreira, and D. S. Rosa, Carbohydr. Polym., 193, 39 (2018).
R. J. Hickey and A. E. Pelling, Front. Bioeng. Biotechnol., doi: https://doi.org/10.3389/fbioe.2019.00045 (2019).
X. Zhang, C. Wang, M. Liao, L. Dai, Y. Tang, H. Zhang, P. Coates, F. Sefat, L. Zheng, and J. Song, Carbohydr. Polym., 213, 27 (2019).
N. O’Donnell, I. A. Okkelman, P. Timashev, T. I. Gromovykh, D. B. Papkovsky, and R. I. Dmitriev, Acta Biomater., 80, 85 (2018).
B. Pei, W. Wang, Y. Fan, X. Wang, F. Watari, and X. Li, Regen. Biomater., 4, 257 (2017).
N. T. Lam, R. Chollakup, W. Smitthipong, T. Nimchua, and P. Sukyai, Ind. Crops Prod., 100, 183 (2017).
S. Ventura-Cruz, N. Flores-Alamo, and A. Tecante, Int. J. Biol. Macromol., 155, 324 (2020).
I. Gulati, J. Park, S. Maken, and M. G. Lee, Fiber. Polym., 15, 680 (2014).
D. C. Marin, A. Vecchio, L. N. Ludueña, D. Fasce, V. A. Alvarez, and P. M. Stefani, Fiber. Polym., 16, 285 (2015).
W. A. Paixão, L. S. Martins, N. C. Zanini, and D. R. Mulinari, J. Inorg. Organomet. Polym. Mater., 30, 2591 (2019).
I. R. Dantas, N. C. Zanini, J. P. Cipriano, M. R. Capri, and D. R. Mulinari in “Advances in Natural Fibre Composites” (R. Fangueiro and S. Rana Eds.), pp.51–59, Springer, Cham, 2018.
J. Guedes, W. M. Florentino, and D. R. Mulinari, “Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems”, pp.55–73, Elsevier Inc., Amsterdam, 2016.
L. D. E. Araujo, N. G. Pimenta, M. F. Bergmann, A. V. Pinto, R. Battisti, and E. C. Leopoldino, Rev. Técnico Científica do IFSC, 2.9, 11 (2020).
R. D. S. Zenni, C. V. Helm, and L. B. B. Tavares, Rev. Gestão Sustentabilidade Ambient., 7, 276 (2018).
V. Narayanamurthy, F. Samsuri, A. Y. F. Khan, H. A. Hamzah, M. B. Baharom, T. Kumary, A. Kumar, and D. K. Raj, Bioinspiration Biomimetics, 15, 016002 (2019).
P. Slepička, J. Siegel, O. Lyutakov, N. S. Kasálková, Z. Kolská, L. Bačáková, and V. Švorčík, Biotechnol. Adv., 36, 839 (2018).
M. Gandara, D. R. Mulinari, F. M. Monticeli, M. R. Capri, D. R. Mulinari, and F. M. Monticeli, J. Nat. Fibers, https://doi.org/10.1080/15440478.2019.1710653 (2020).
G. Basu, L. Mishra, and A. K. Samanta, J. Nat. Fibers, 16, 442 (2019).
A. S. Fonseca, S. Panthapulakkal, S. K. Konar, M. Sain, L. Bufalino, J. Raabe, I. P. A. Miranda, M. A. Martins, and G. H. D. Tonoli, Ind. Crops Prod., 131, 203 (2019).
L. Hilliou, P. F. Teixeira, D. Machado, J. A. Covas, C. S. S. Oliveira, A. F. Duque, and M. A. M. Reis, Polym. Degrad. Stab., 128, 269 (2016).
S. I. Atsani and H. Mastrisiswadi, IOP Conf. Ser. Mater. Sci. Eng., 722, 012022 (2020).
Z. Hu, Q. Shao, Y. Huang, L. Yu, D. Zhang, X. Xu, J. Lin, H. Liu, and Z. Guo, Nanotechnology, 29, 185602 (2018).
M. Kathirselvam, A. Kumaravel, V. P. Arthanarieswaran, and S. S. Saravanakumar, Carbohydr. Polym., 217, 178 (2019).
O. A. Adeyeye, E. R. Sadiku, A. B. Reddy, A. S. Ndamase, G. Makgatho, P. S. Sellamuthu, A. B. Perumal, R. B. Nambiar, V. O. Fasiku, and I. D. Ibrahim in “Green Biopolymers and Their Nanocomposites” (D. Gnanasekaran Eds.), pp.221–231, Springer, Singapore, 2019.
A. Hassan, M. R. M. Isa, and Z. A. M. Ishak, BioResources, 14, 3101 (2019).
T. Zheng, Z. Zhang, S. Shukla, S. Agnihotri, C. M. Clemons, and S. Pilla, Carbohydr. Polym., 205, 27 (2019).
K. Yorseng, N. Rajini, S. Siengchin, N. Ayrilmis, and V. Rajulu, Process Saf. Environ. Prot., 124, 187 (2019).
M. J. Halimatul, S. M. Sapuan, M. Jawaid, M. R. Ishak, and R. A. Ilyas, Polimery/Polymers, 64, 596 (2019).
S. M. Izwan, S. M. Sapuan, M. Y. M. Zuhri, and A. R. Mohamed, J. Mater. Res. Technol., 9, 5805 (2020).
N. Thakor, U. Trivedi, and K. C. Patel, Bioresour. Technol., 96, 1843 (2005).
W. Frącz and G. Janowski, Mechanika, 90, 441 (2018).
A. B. Pillai, A. J. Kumar, and H. Kumarapillai, 3 Biotech, doi: https://doi.org/10.1007/s13205-019-2017-9 (2020).
N. Israni, P. Venkatachalam, B. Gajaraj, K. N. Varalakshmi, and S. Shivakumar, J. Environ. Manage., 255, 109884 (2020).
M. L. Latour, M. Tarar, R. J. Hickey, C. M. Cuerrier, I. Catelas, A. E. Pelling, and G. Hall, bioRxiv, https://doi.org/10.1101/2020.01.15.906677 (2020).
S. Gorgieva, L. Girandon, and V. Kokol, Mater. Sci. Eng. C, 73, 478 (2017).
G. Mutlu, S. Calamak, K. Ulubayram, and E. Guven, J. Drug Deliv. Sci. Technol., 43, 185 (2018).
N. F. Braga, D. A. Vital, L. M. Guerrini, A. P. Lemes, D. M. D. Formaggio, D. B. Tada, T. M. Arantes, and F. H. Cristovan, Biopolymers, doi: https://doi.org/10.1002/bip.23120 (2018).
J. Wangler and R. Kohlus, Chem. Eng. Technol., 40, 1552 (2017).
T. L. de A. Montanheiro, L. S. Montagna, V. Patrulea, O. Jordan, G. Borchard, R. G. Ribas, T. M. B. Campos, G. P. Thim, and A. P. Lemes, Polym. Test., 79, 106079 (2019).
K. Nisogi, O. Satoshi, S. Kobayashi, K. Kuroda, and T. Okamoto, Mater. Sci. Forum, 985, 64 (2020).
M. Kouhi, M. Fathi, M. P. Prabhakaran, M. Shamanian, and S. Ramakrishna, Appl. Surf. Sci., 457, 616 (2018).
R. S. Ambekar and B. Kandasubramanian, Ind. Eng. Chem. Res., 58, 6163 (2019).
H. Tohidlou, S. S. Shafiei, S. Abbasi, M. Asadi-Eydivand, and M. Fathi-Roudsari, Fiber. Polym., 20, 1869 (2019).
A. P. M Madrid, S. M. Vrech, M. A. Sanchez, and A. P. Rodriguez, Mater. Sci. Eng. C, 100, 631 (2019).
S. Saska, L. C. Pires, M. A. Cominotte, L. S. Mendes, M. F. de Oliveira, I. A. Maia, J. V. L. da Silva, S. J. L. Ribeiro, and J. A. Cirelli, Mater. Sci. Eng. C, 89, 265 (2018).
S. Mondal and U. Pal, J. Drug Deliv. Sci. Technol., 53, 101131 (2019).
M. Pilia, T. Guda, and M. Appleford, Biomed Res. Int., doi: https://doi.org/10.1155/2013/458253 (2013).
M. Hassan, K. Dave, R. Chandrawati, F. Dehghani, and V. G. Gomes, Eur. Polym. J., 121, 109340 (2019).
Acknowledgment
The authors are grateful for the research support by FAPERJ (Process 260.026/2018) and the company Biosolvit for the donation of royal palm fibers.
Author information
Authors and Affiliations
Corresponding authors
Electronic Supplementary Material (ESM)
Rights and permissions
About this article
Cite this article
Zanini, N., Carneiro, E., Menezes, L. et al. Palm Fibers Residues from Agro-industries as Reinforcement in Biopolymer Filaments for 3D-printed Scaffolds. Fibers Polym 22, 2689–2699 (2021). https://doi.org/10.1007/s12221-021-0936-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-021-0936-7