Abstract
In this research, the variation of mechanical properties (i.e. tensile, flexural and impact strength), physical properties (i.e. water absorption, SEM and thickness swelling) and thermal properties of sugar palm fibre reinforced vinyl ester composites were investigated. The composites with different fibre content, which are 10 wt.%, 20 wt.%, 30 wt.% and 40 wt.%, were prepared. The additions of sugar palm fibres to vinyl ester reduce tensile and flexural strength of the composites, which are 25.1 MPa (10 wt.%), 12.5 MPa (20 wt.%), 9.7 MPa (30 wt.%) and 6.1 MPa (40 wt.%) for tensile strength, while for flexural strength, the results recorded 48.5 MPa, 24 MPa, 18.8 MPa and 2.5 MPa for 10 wt.%, 20 wt.%, 30 wt.% and 40 wt.%. However, sugar palm fibres improve impact strength of the composites especially at 30 wt% with 5.4 kJ/m2. The addition of sugar palm fibres also raise the water absorption and thickness swelling of the composites as the presence of fibres in the composites increase water retained in the composites. Besides that, thermal stability of the composites also reduces by the addition of the sugar palm fibres that shows the onset temperature of thermal degradation of 10 wt.% was at 270.83 °C, while 40 wt.% was at 196.67 °C.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
B. D. Agarwal, L. J. Broutman, and K. Chandrashekhara in “Analysis and Performance of Fiber Composites”, 3rd ed. (B. D. Agarwal, L. J. Broutman, and K. Chandrashekhara Eds.), Wiley India, New Delhi, 2006.
D. Bachtiar, S. M. Sapuan, E. S. Zainudin, A. Khalina, and K. Z. M. Dahlan, IOP Conf. Ser. Mater. Sci. Eng., 11, 12012 (2010).
M. R. M. Huzaifah, S. M. Sapuan, Z. Leman, M. R. Ishak, and M. A. Maleque, Multidiscip. Model. Mater. Struct., 13, 678 (2017).
M. R. Ishak, S. M. Sapuan, Z. Leman, M. Z. A. Rahman, and U. M. K. Anwar, J. Therm. Anal. Calorim., 109, 981 (2012).
J. Sahari, S. M. Sapuan, Z. N. Ismarrubie, and M. Z. A. Rahman, Key Eng. Mater., 411, 502 (2011).
J. Sahari, S. M. Sapuan, Z. N. Ismarrubie, and M. Z. A. Rahman, Fibres Text. East. Eur., 91, 21 (2012).
A. Ali, A. B. Sanuddin, and S. Ezzeddin, Mater. Des., 31, 3550 (2010).
M. Chalid and I. Prabowo, Int. J. Chem. Mol. Nucl. Mater. Metall. Eng., 9, 342 (2015).
K. Diharjo, S. H. Setiajit, S. Rojikin, H. I. Akbar, I. T. Maulana, D. M. Natsir, and Y. Waloyo, Int. Conf. Eng. Sc. Nanotech., 1788, 30050 (2017).
Z. Leman, S. M. Sapuan, M. Azwan, M. M. H. M. Ahmad, and M. A. Maleque, Polym. Plast. Technol. Eng., 47, 606 (2008).
J. Mogea, B. Seibert, and W. Smits, Agrofor. Syst., 13, 111 (1991).
M. L. Sanyang, S. M. Sapuan, M. Jawaid, M. R. Ishak, and J. Sahari, Renew. Sustain. Energy Rev., 54, 533 (2015).
P. A. Khudur, O. S. Zaroog, B. A. Khidir, and Z. S. Radif, Int. J. Sci. Res., 2, 273 (2013).
D. Bachtiar, S. M. Sapuan, E. S. Zainudin, A. Khalina, and K. Z. M. Dahlan, BioResources, 6, 4815 (2011).
W. Z. W. Zahari, R. N. R. L. Badri, H. Ardyananta, D. Kurniawan, and F. M. Nor, Procedia Manuf., 2, 573 (2015).
H. Y. Sastra, J. P. Siregar, S. M. Sapuan, and M. M. Hamdan, Polym. Plast. Technol. Eng., 45, 149 (2006).
O. Faruk, A. K. Bledzki, H. Fink, and M. Sain, Prog. Polym. Sci., 37, 1552 (2012).
C. Manickam, J. Kumar, A. Athijayamani, and N. Diwahar, J. Eng. Res., 3, 97 (2015).
N. Sarifuddin, H. Ismail, and Z. Ahmad, BioResources, 7, 4294 (2012).
F. Yao, Q. Wu, Y. Lei, and Y. Xu, Ind. Crops Prod., 28, 63 (2008).
Y. A. El-Shekeil, S. M. Sapuan, K. Abdan, and E. S. Zainudin, Mater. Des., 40, 299 (2012).
S. Ojha, G. Raghavendra, and S. K. Acharya, JOM, 2, 6 (2016).
X. Li, L. G. Tabil, S. Panigrahi, and W. J. Crerar, Can. Biosyst. Eng., 1 (2006).
A. K. Mohanty, M. A. Khan, and G. Hinrichsen, Compos. Pt. A-Appl. Sci. Manuf., 31, 143 (2000).
I. S. Aji, E. S. Zainudin, A. Khalina, S. M. Sapuan, and M. D. Khairul, J. Reinf. Plast. Compos., 30, 546 (2011).
N. A. Sri Aprilia, H. P. S. Abdul Khalil, A. H. Bhat, R. Dungani, and M. S. Hossain, BioResources, 9, 4888 (2014).
M. S. Ibrahim, S. M. Sapuan, and A. A. Faieza, J. Mech. Eng. Sci., 2, 133 (2012).
M. M. Haque, M. Hasan, M. S. Islam, and M. E. Ali, Bioresour. Technol., 100, 4903 (2009).
H. Ismail, R. M. Jaffri, and H. D. Rozman, J. Elastomers Plast., 35, 181 (2003).
M. R. M. Huzaifah, S. M. Sapuan, Z. Leman, and M. R. Ishak, BioResources, 12, 9366 (2017).
J. Sahari, S. M. Sapuan, E. S. Zainudin, and M. A. Maleque, Procedia Chem., 4, 254 (2012).
M. S. Jamil, I. Ahmad, and I. Abdullah, J. Polym. Res., 13, 315 (2006).
H. S. Yang, H. J. Kim, H. J. Park, B. J. Lee, and T. S. Hwang, Compos. Struct., 72, 429 (2006).
H. S. Yang, H. J. Kim, H. J. Park, B. J. Lee, and T. S. Hwang, Compos. Struct., 77, 45 (2007).
K. L. Pickering, M. G. A. Efendy, and T. M. Le, Compos. Pt. A-Appl. Sci. Manuf., 83, 98 (2016).
B. H. Lee, H. J. Kim, and W. R. Yu, Fiber. Polym., 10, 83 (2009).
S. O. Adeosun, O. P. Gbenebor, E. I. Akpan, and F. A. Udeme, Arab. J. Sci. Eng., 41, 4153 (2016).
A. M. Radzi, S. M. Sapuan, M. Jawaid, and M. R. Mansor, Fiber. Polym., 18, 1353 (2017).
M. S. Sreekala, J. George, M. G. Kumaran, and S. Thomas, Compos. Sci. Technol., 62, 339 (2002).
R. Nadlene, S. M. Sapuan, M. Jawaid, M. R. Ishak, and L. Yusriah, Polym. Compos., 1 (2016).
R. Jumaidin, S. M. Sapuan, M. Jawaid, M. R. Ishak, and J. Sahari, Int. J. Biol. Macromol., 97, 606 (2017).
M. R. Ishak, Z. Leman, S. M. Sapuan, M. Y. Salleh, and S. Misri, Int. J. Mech. Mater. Eng., 4, 316 (2009).
M. F. Munoz-Velez, M. A. Hidalgo-Salazar, and J. H. Mina-Hernandez, Polymers (Basel), 10, 1050 (2018).
M. N. Norizan, K. Abdan, M. S. Salit, and R. Mohamed, J. Phys. Sci., 28, 115 (2017).
F. Z. Arrakhiz, M. E. Achaby, M. Malha, M. O. Bensalah, O. Fassi-Fehri, R. Bohfid, K. Benmoussa, and A. Qaiss, Mater. Des., 43, 200 (2013).
R. Nadlene, S. M. Sapuan, M. Jawaid, M. R. Ishak, and L. Yusriah, BioResources, 10, 1803 (2015).
M. R. Ishak, S. M. Sapuan, Z. Leman, M. Z. A. Rahman, and U. M. K. Anwar, J. Therm. Anal. Calorim., 109, 981 (2012).
H. Yang, R. Yan, H. Chen, D. H. Lee, and C. Zheng, Fuel, 86, 1781 (2007).
R. Vanholme, B. Demedts, K. Morreel, J. Ralph, and W. Boerjan, Plant Physiol., 153, 895 (2010).
D. Ray, B. K. Sarkar, R. K. Basak, and A. K. Rana, J. Appl. Polym. Sci., 94, 123 (2004).
V. Alvarez, E. Rodriguez, and A. Vazquez, J. Therm. Anal. Calorim., 85, 383 (2006).
S. Mohanty, S. K. Verma, and S. K. Nayak, Compos. Sci. Technol., 66, 538 (2006).
T. P. Sathishkumar, P. Navaneethakrishnan, and S. Shankar, Compos. Sci. Technol., 72, 1183 (2012).
Z. Leman, S. M. Sapuan, A. M. Saifol, M. A. Maleque, and M. M. H. M. Ahmad, Mater. Des., 29, 1666 (2008).
D. Bachtiar, S. M. Sapuan, and M. M. Hamdan, Mater. Des., 29, 1285 (2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huzaifah, M.R.M., Sapuan, S.M., Leman, Z. et al. Effect of Fibre Loading on the Physical, Mechanical and Thermal Properties of Sugar Palm Fibre Reinforced Vinyl Ester Composites. Fibers Polym 20, 1077–1084 (2019). https://doi.org/10.1007/s12221-019-1040-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-019-1040-0