Abstract
Natural fiber reinforced polypropylene (PP) biocomposites were fabricated by blending long-and-discontinuous (LD) natural fibers (NF) with LD PP fibers. Firstly, random fiber mats were prepared by mixing NFs and PP fibers using a carding process. Then, heat and pressure were applied to the mats, such that the PP fibers dispersed in the mats melted and flowed out, resulting in the formation of consolidated sheets upon subsequent cooling. The effect of the fiber volume fraction on the mechanical properties of the bio-composites was scrutinized by carrying out tensile and flexural tests and observing the interface between the fiber and matrix. It was observed that the natural LD fiber content needs to be maintained at less than the nominal fiber fraction of 40 % by weight for the composites fabricated using the current method, which is quite low compared to that of continuous or short fiber reinforced composites. The limited fiber fraction can be explained by the void content in the biocomposites, which may be caused by the non-uniform packing or the deficiency of the matrix PP fibers.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
M. M. Schwartz, “Composite Materials”, Prentice Hall PTR, Newjersey, 1997.
M. Zampaloni, F. Pourboghrat, S. A. Yankovich, B. N. Rodgers, J. Moore, L. T. Drzal, A. K. Mohanty, and M. Misra, Compos. Part A-Appl. S., 38, 1569 (2007).
M. Baiardo, E. Zini, and M. Scandola, Compos. Part A-Appl. S., 35, 703 (2004).
A. K. Mohanty and M. Misra, Macromol. Mater. Eng., 276–277, 1 (2000).
J.-M. Park, S. T. Quang, B.-S. Hwang, and K. L. DeVries, Compos. Sci. Technol., 66, 2686 (2006).
A. K. Rana, A. Mandal, and S. Bandyopadhyay, Compos. Sci. Technol., 63, 801 (2003).
A. Stocchi, B. Lauke, A. Vázquez, and C. Bernal, Compos. Part A-Appl. S., 38, 1337 (2007).
L. A. Pothan, P. Potschke, R. Habler, and S. Thomas, J. Compos. Mater., 39, 1007 (2005).
H. N. Dhakal, Z. Y. Zhang, M. O. W. Richardson, and O. A. Z. Errajhi, Compos. Struct., 81, 559 (2007).
P. Wambua, J. Ivens, and I. Verpoest, Compos. Sci. Technol., 63, 1259 (2003).
S. Shibata, Y. Cao, and I. Fukumoto, Polym. Test., 25, 142 (2006).
S. W. Kim, S. Oh, and K. Lee, Radiat. Phys. Chem., 76, 1711 (2007).
T. Czigany, Compos. Sci. Technol., 66, 3210 (2006).
S. Luo and A. N. Netravali, J. Mater. Sci., V34, 3709 (1999).
C. L. Tucker Iii and E. Liang, Compos. Sci. Technol., 59, 655 (1999).
R. F. Gibson, “Principles of Composite Material Mechanics”, McGraw-Hill, New York, 1994.
K. K. Chawla, “Composite Materials”, Springer, New York, 1998.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, BH., Kim, HJ. & Yu, WR. Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties. Fibers Polym 10, 83–90 (2009). https://doi.org/10.1007/s12221-009-0083-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-009-0083-z