Abstract
The aim of this work is to study the influence of low pressure plasma (LPP) treatment on the durability of thermoplastic composites using flax and coconut fibers as reinforcement. Two different aging conditions were evaluated, high temperature (73 °C) and high temperature plus water immersion. In both cases five aging times (1, 2, 8, 30 and 60 days) were evaluated. Composite materials were prepared with treated and untreated flax and coconut fibers with 30 % of fiber content and a low density polyethylene (LDPE) matrix. Composites were manufactured using a rotor mixer and a hot plates press. The influence of the aging conditions on each type of fiber, flax or coconut, as well as the plasma treatment effect in all composite materials were studied by determining water absorption and mechanical properties. Mechanical properties were assessed by three point bending tests and the water uptake was determined by weight measurements. Thermal properties were also studied by Differential Scanning Calorimetric (DSC) technique. Finally, the liquids where the specimens were submerged in were evaluated by ultraviolet spectroscopy to analyse cellulose or lignin amounts dissolved. In all cases, durability was mainly affected by the humidity but not so much by high temperatures, obtaining better bending strength and Young’s modulus in the LPP treated materials, especially those with flax fiber reinforcement.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
P. J. Herrera-Franco and A. Valadez-González, Compos. Pt. B-Eng., 36, 597 (2005).
M. J. John and S. Thomas, “Biofibers and Biocomposites”, Carbohydr. Polym., 71, 343 (2008).
K. Charlet, J. P. Jernot, S. Eve, M. Gomina, and J. Bréard, Carbohydr. Polym., 82, 54 (2010).
A. K. Bledzki, S. Reihmane, and J. Gassan, J. Appl. Polym. Sci., 59, 1329 (1996).
O. Faruk, A. K. Bledzki, H. P. Fink, and M. Sain, Prog. Polym. Sci., 37, 1552 (2012).
S. Harish, D. P. Michael, A. Bensely, D. M. Lal, and A. Rajadurai, Mater. Charact., 60, 44 (2009).
P. R. Hornsby, E. Hinrichsen, and K. Tarverdi, J. Mater. Sci., 32, 1009 (1997).
K. G. Satyanarayana, J. L. Guimarães, and F. Wypych, Compos. Pt. A-Appl. Sci. Manuf., 38, 1694 (2007).
Z. N. Azwa, B. F. Yousif, A. C. Manalo, and W. Karunasena, Mater. Des., 47, 424 (2013).
D. B. Dittenber and H. V. S. Gangarao, Compos. Pt. AAppl. Sci. Manuf., 43, 1419 (2012).
T. Sen and H. N. J. Reddy, Int. J. Innov. Maagement Technol., 2, 186 (2011).
L. B. Manfredi, E. S. Rodríguez, M. Wladyka-Przybylak, and A. Vázquez, Polym. Degrad. Stab., 91, 255 (2006).
P. Methacanon, U. Weerawatsophon, N. Sumransin, C. Prahsarn, and D. T. Bergado, Carbohydr. Polym., 82, 1090 (2010).
X. Li, L. G. Tabil, and S. Panigrahi, J. Polym. Environ., 15, 25 (2007).
C. Tendero, C. Tixier, P. Tristant, J. Desmaison, and P. Leprince, Spectroc. Acta Pt. B-Atom. Spectr., 61, 2 (2006).
N. S. J. Braithwaite, Plasma Sources Sci. Technol., 9, 517 (2000).
H. Conrads and M. Schmidt, Plasma Sources Sci. Technol., 9, 441 (2000).
N. Encinas, B. Díaz-Benito, J. Abenojar, and M. A. Martínez, Surf. Coatings Technol., 205, 396 (2010).
C. Rodríguez-Villanueva, N. Encinas, J. Abenojar, and M. A. Martínez, Surf. Coatings Technol., 236, 450 (2013).
B. Enciso, J. Abenojar, and M. A. Martínez, Cellulose, 24, 1791 (2017).
J. Comyn, “Polymer Permeability”, pp.1–10, Elsevier Applied Science Publishers, London, 1985.
M. Assarar, D. Scida, A. El Mahi, C. Poilâne, and R. Ayad, Mater. Des., 32, 788 (2011).
C.-H. Shen and G. S. Springer, J. Compos. Mater., 10, 2 (1976).
A. K. Bledzki and J. Gassan, Prog. Polym. Sci., 24, 221 (1999).
Y. Li, Y. Mai, and L. Ye, Compos. Sci. Technol., 60, 2037 (2006).
A. Espert, F. Vilaplana, and S. Karlsson, Compos. Pt. AAppl. Sci. Manuf., 35, 1267 (2004).
O. Faruk and M. Sain, “Biofiber Reinforcement in Composite Materials”, UK: Elsevier Ltd., 2014.
A. Arbelaiz, B. Fernández, J. A. Ramos, A. Retegi, R. Llano-Ponte, and I. Mondragon, Compos. Sci. Technol., 65, 1582 (2005).
B. F. Abu-Sharkh and H. Hamid, Polym. Degrad. Stabil., 85, 967 (2004).
G. B. Nagarajappa and K. K. Pandey, J. Photochem. Photobiol. B: Biol., 155, 20 (2016).
M. Karlovits and D. Gregor-svetec, Acta Polytechnica Hungarica, 9, 81 (2012).
K. Wang, F. Xu, and R. Sun, Int. J. Mol. Sci., 11, 2988 (2010).
A. K. Kumar, B. S. Parikh, and M. Pravakar, Environ. Sci. Pollut. Res., 23, 9265 (2016).
K. Ross and G. Mazza, Int. J. Mol. Sci., 11, 4035 (2010).
E. Privas and P. Navard, Carbohydr. Polym., 93, 300 (2013).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Enciso, B., Abenojar, J., Paz, E. et al. Influence of Low Pressure Plasma Treatment on the Durability of Thermoplastic Composites LDPE-flax/coconut under Thermal and Humidity Conditions. Fibers Polym 19, 1327–1334 (2018). https://doi.org/10.1007/s12221-018-1086-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-018-1086-4