Abstract
The effects of yarn number and liquid ammonia (L/A) treatment on the physical properties of woven fabrics prepared with pure hemp spun yarns were investigated. As a result of L/A treatment, the crystal structure of hemp fiber was changed from cellulose I to the mixtures of cellulose III and cellulose I and its crystallinity was slightly decreased by 13 %. The crease recovery of hemp fabric treated with L/A was improved upto 78 %. The washing shrinkage of hemp fabric treated with L/A decreased significantly to less than 0.4 %, while the washing shrinkage of hemp fabric prepared with the fined yarn was superior to that of hemp fabric prepared with the coarsed yarn. Especially, the wicking speed and drying ratio of hemp fabrics treated with L/A were higher than those of the untreated as yarn number increased. However, it was found that there is no significant effect on the UV protection of the L/A treated hemp fabrics.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
X. Lu and R. C. Clake, J. Int. Hemp Assoc., 2, 26 (1995).
B. M. Pejic, M. M. Kostic, P. D. Skundric, and J. Z. Praskalo, Bioresource Technol., 99, 7152 (2007).
J. Mankoski, Fibers Text. East. Eur., 11, 20 (2003).
M. Kostic, B. Pejic, and P. Skundric, Bioresource Technol., 99, 94 (2008).
J. Li, J. Feng, H. Zhang, and J. Zhang, Fibers Text. East. Eur., 18, 81 (2010).
M. M. Kostic, B. M. Pejic, K. A. Asanovic, V. M. Aleksic, and P. D. Skundric, Industrial Crop and Product, 32, 169 (2010).
R. Brazis, J. Czekalski, D. Kozakiewiz, M. Michalak, and M. Stasiak, Fibers Text. East. Eur., 8, 35 (2000).
J. Czekalski, D. Kozakiewiz, M. Michalak, and M. Stasiak, Fibers Text. East. Eur., 8, 24 (2000).
S. Milosavljivic and T. Tadic, Ind. Text. J., 112, 31 (2001).
T. Wakida, T. Moriya, M. C. Lee, H. Yoshioka, and Y. Yanai, Text. Res. J., 70, 161 (2000).
M. S. Lee, M. C. Lee, T. Tokuyama, T. Wakida, G. Inoue, and S. Ishida, J. Appl. Polym. Sci., 101, 3487 (2006).
T. Wakida, Y. Kitamura, M. C. Lee, S. Y. Bae, M. Chen, H. Yoshioka, and Y. Yanai, Text. Res. J., 70, 769 (2000).
M. C. Lee, T. Wakida, T. Tokuyama, C. Doi, Y. J. Lim, and S. K. Jeon, Text. Res. J., 75, 13 (2005).
S. Y. Bae, M. C. Lee, K. H. Kim, and T. Wakida, J. Korean Soc. Dyers Finishers, 7, 10 (1995).
H. S. Kim, S. Y. Bae, M. C. Lee, K. H. Kim, and H. H. Cho, J. Korean Fiber Soc., 32, 150 (1995).
M. S. Lee, M. C. Lee, and T. Wakida, J. Korean Fiber Soc., 39, 73 (2002).
M. S. Lee, S. Y. Bae, M. C. Lee, H. H. Cho, and T. I. Chun, J. Korean Fiber Soc., 38, 250 (2001).
Australian/New Zealand Standard AS /NZS 4399, 1966.
B. Dornyi, E. Csiszar, C. Somlai, and I. Sajo, Text. Res. J., 76, 629 (2006).
J. D. Kim, I. S. Kim, and T. S. Choi, J. Korean Fiber Soc., 29, 85 (1992).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hwang, M.S., Ji, D.S. The effects of yarn number and liquid ammonia treatment on the physical properties of hemp woven fabrics. Fibers Polym 13, 1335–1340 (2012). https://doi.org/10.1007/s12221-012-1335-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-012-1335-x