Abstract
In this study, on the basis of the various contact angles and the hybrid theory, a new mathematic model without the raceway control hypothesis is proposed for the analysis of ball bearing under the combined axial, radial and moment loads. Instead of the orthogonal decomposition method, the triangular geometric theorem and vector diagram method have been used in the force analysis of local ball to improve the computation efficiency of bearing analysis. For validation purpose, the comparative analysis of the ball-raceway contact angles and loads of ball bearing under different operation conditions obtained by the proposed model and the Jones’ model with different raceway control hypotheses has been conducted. The results show that the proposed model has a higher applicability and rationality compared to the Jones’ model, and a proper moment load can be used to improve the load distribution and service performance of ball bearing subjected to the radial load.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. Stribeck, Ball bearing for various loads, Transactions of the ASME, 29 (1907) 420–463.
H. Sjovall, The load distribution within ball and roller bearings under given external radial and axial load, Teknisk Tidskrift, 19 (3) (1933) 72–75.
G. Lundberg, Dynamic capacity of roller bearings, Mechanical Engineering, 4 (2) (1952) 96–127.
A. Palmgren, Ball and Roller Bearing Engineering, Philadelphia: SKF Industries Inc. (1959).
A. B. Jones, A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed conditions, Journal of Basic Engineering, 82 (2) (1960) 309–320.
T. A. Harris, Rolling Bearing Analysis, 4th Edition, John Wiley and Sons, Inc., New York (2000).
C. A. Ding et al., Raceway control assumption and the determination of rolling element attitude angle, Chinese Journal of Mechanical Engineering, 37 (2) (2001) 58–61.
W. Z. Wang et al., Modeling angular contact ball bearing without raceway control hypothesis, Mechanism and Machine Theory, 82 (2014) 154–172.
C. A. Foord, High-speed ball bearing analysis, Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, 220 (5) (2006) 537–544.
T. A. Harris, An analytical method to predict skidding in thrust-loaded, angular-contact ball bearings, Journal of Lubrication Technology, 93 (1) (1971) 17–24.
N. T. Liao and J. F. Lin, A new method for the analysis of deformation and load in a ball bearing with variable contact angle, Journal of Mechanical Design, 123 (2) (2001) 304–312.
N. T. Liao and J. F. Lin, A new method developed for the analysis of ball bearing fatigue life considering variable contact angles, Tribology Transactions, 46 (3) (2003) 435–446.
N. T. Liao and J. F. Lin, An analysis of misaligned single-row angular-contact ball bearing, Journal of Mechanical Design, 126 (2) (2004) 370–374.
Y. Guo and R. G. Parker, Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model, Mechanism and Machine Theory, 51 (2012) 32–45.
J. F. Antoine, G. Abba and A. Molinari, A new proposal for explicit angle calculation in angular contact ball bearing, Journal of Mechanical Design, 128 (2) (2006) 468–478.
B. Fang, J. H. Zhang, J. Hong and Y. S. Zhu, Quick calculation method and contact angle analysis for high-speed angular contact ball bearing under combined loads, Hsi-An Chiao Tung Ta Hsueh/Journal of Xi’an Jiaotong University, 51 (6) (2017) 115–121.
X. Li, H. Li, Y. Zhang and J. Hong, Investigation of non-uniform preload on the static and rotational performances for spindle bearing system, International Journal of Machine Tools and Manufacture, 106 (2016) 11–21.
X. H. Li et al., Experiment analysis of spindle performance with rolling bearing under non-uniform preload, ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 230 (17) (2015) 203–210.
Y. Zhang et al., Uneven heat generation and thermal performance of spindle bearings, Tribology International, 126 (2018).
Acknowledgments
This work is supported by the National Natural Science Foundation of China (51635010) and Henan Key Laboratory of High-performance Bearings, Luo Yang 471003, China (2016 ZCKF01).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Editor Hyung Wook Park
Jin-hua Zhang received his Ph.D. from Xi’an Jiaotong University at the Department of Mechanical Engineering in 2008. He is now an Associate Professor at the Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System and State Key Laboratory for Manufacturing Systems Engineering. His specialty includes rolling bearing and rotor dynamics, soft robotics, Multibody and nonlinear dynamics, tribology, mechanical design and multi-objective optimization, brain-machine interface.
Rights and permissions
About this article
Cite this article
Zhang, Jh., Fang, B., Yan, K. et al. A novel model for high-speed angular contact ball bearing by considering variable contact angles. J Mech Sci Technol 34, 809–816 (2020). https://doi.org/10.1007/s12206-020-0129-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-020-0129-0