Abstract
The wheelset treads and axle box bearings of railway vehicles often suffer from fatigue failures. Their regular maintenance highly depends on manual off-line inspection with low working efficiency and poor precision for early failure detection. This study proposes a fault diagnosis method by band-pass filtering and by enveloping the accelerations collected from the axle box bearing on the underfloor wheelset lathe to improve the maintenance efficiency. This process is followed by the refined phase difference correction using the four-term third derivative Nuttall-windowed fast Fourier transform (RPNWF) to extract accurate amplitudes of the fault characteristic frequency and its harmonics. The integration scheme, work flow, and application examples of the fault diagnosis system are presented. Simulation analysis and results show that the developed method can achieve effective diagnosis of the fault and fault degree of axle box bearings as well as yield better correction accuracy than the commonly used discrete spectrum correction methods.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Y. F. Li et al., Train axle bearing fault detection using a feature selection scheme based multi-scale morphological filter, Mechanical Systems and Signal Processing, 101 (2018) 435–448.
Q. Xiao et al., Analysis of the wheel/rail rolling contact fatigue of a high-speed train under the transient mechanism, Journal of Mechanical Science & Technology, 31 (5) (2017) 2235–2242.
K. Zhang et al., Research on eddy current pulsed thermography for rolling contact fatigue crack detection and quantification in wheel tread, 2016 18th International Wheelset Congress (IWC) (2017) 5–11.
X. W. Wu and M. R. Chi, Study on stress states of a wheelset axle due to a defective wheel, Journal of Mechanical Science & Technology, 30 (11) (2016) 4845–4857.
C. Klinger and D. Bettge, Axle fracture of an ICE3 high speed train, Engineering Failure Analysis, 35 (2013) 66–81.
Q. Xiong, Research on feature extraction and fault diagnosis method of vibration signal of rolling bearing in train, Ph.D. Thesis, Southwest Jiaotong University, Chengdu, China (2015).
A. Amini et al., Wayside detection of faults in railway axle bearings using time spectral kurtosis analysis on high frequency acoustic emission signals, Advances in Mechanical Engineering, 8 (11) (2016) 1–9.
T. Nijssen and H. J. Reiche, Underfloor wheel set lathe for machining wheel sets of railway vehicles, European Patent, EP1836018 (2007).
A. R. Andrade and J. Stow, Assessing the efficiency of maintenance operators: A case study of turning railway wheelsets on an under-floor wheel lathe, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (2) (2017) 155–163.
C. Vale et al., Novel efficient technologies in Europe for axle bearing condition monitoring-the MAXBE project, Transportation Research Procedia, 14 (2016) 635–644.
A. Amini et al., Onboard detection of railway axle bearing defects using envelope analysis of high frequency acoustic emission signals, Case Studies in Nondestructive Testing & Evaluation, 6 (2016) 8–16.
H. Zhang et al., Multi-bearing defect detection with trackside acoustic signal based on a pseudo time-frequency analysis and Dopplerlet filter, Mechanical Systems & Signal Processing, s70–71 (4) (2016) 176–200.
M. Asplund et al., Condition monitoring and e-maintenance solution of railway wheels, Journal of Quality in Maintenance Engineering, 20 (3) (2014) 216–232.
J. J. Zhang and Q. F. Zhang, The underfloor wheelset replacement device of axle box bearing in Shaoshan locomotives, Electric Drive for Locomotives, 6 (2011) 83–84.
V. C. Tao et al., Processing method of locomotive wheel wear statistical data and predication model of turning period, Journal of the China Railway Society, 37 (12) (2015) 14–19.
H. J. Sun, Discussion on bearing service life of passenger electric locomotives, Railway Locomotive & Car, 30 (6) (2010) 88–90.
H. B. Wei, The analysis and treatment of common faults of U2000-400 type underfloor wheelset lathe, Shanghai Railway Science & Technology, 2 (2016) 123–125.
J. M. Yan and M. H. Fu, Vehicle engineering, 3rd ed, Beijing, China: China Railway Publishing Press (2009) 43–46.
N. Wang et al., Study on fault diagnosis of low-speed rolling bearing using stress waves and wavelet analysis, Journal of Vibration Engineering, 20 (3) (2007) 280–284.
J. Schoukens, Y. Rolain and R. Pintelon, Analysis of windowing/leakage effects in frequency response function measurements, Automatica., 42 (1) (2006) 27–38.
K. Ding, M. Xie and X. F. Zhang, Phase difference correction method for phase and frequency in spectral analysis, Mechanical Systems and Signal Processing, 14 (5) (2000) 835–843.
W. B. Hu et al., An improved frequency spectrum correction method based on phase difference correction method, Journal of Vibration and Shock, 31 (1) (2012) 162–166.
A. H. Nuttall, Some windows with very good sidelobe behavior, IEEE Transactions on Acoustics Speech & Signal Processing, 29 (1) (1981) 84–91.
X. Y. Qiu and F. L. Li, Microgrid harmonic detection algorithm based on Nuttall window DFT correction, Journal of Electric Power Science And Technology, 32 (1) (2017) 65–70.
Y. Xiao et al., Fast Quasi-synchronous harmonic algorithm based on weight window function-mixed radix FFT, 2016 IEEE International Workshop on Applied Measurements for Power Systems (AMPS) (2016).
B. Zeng et al., Harmonic phasor analysis based on improved FFT algorithm, IEEE Transactions on Smart Grid, 2 (1) (2011) 51–59.
L. G. Cai, G. H. Sun and Z. F. Liu, The dynamic characteristic and finite element analysis on wheelset driving system of underfloor wheelset lathe, 2014 International Conference on Mechanics and Civil Engineering (ICMCE-14) (2014) 292–298.
P. Wang and M. F. Liao, Adaptive demodulated resonance technique for the rolling bearing fault diagnosis, Journal of Aerospace Power, 20 (4) (2005) 606–612.
F. J. Harris, On the use of harmonic analysis with the discrete Fourier transform, Proceedings of the IEEE, 66 (1) (1978) 51–83.
T. Grandke, Interpolation algorithms for discrete fourier transforms of weighted signals, IEEE Transactions on Instrumentation & Measurement, 32 (2) (1983) 350–355.
X. Y. He et al., Fault diagnosis of rolling bearing based on acceleration envelope technique, China Plant Engineering, 10 (2017) 63–65.
Y. T. Sheen, On the study of applying morlet wavelet to the Hilbert transform for the envelope detection of bearing vibrations, Mechanical Systems and Signal Processing, 23 (5) (2009) 1518–1527.
M. Unser, A. Aldroubi and M. Eden, Polynomial spline signal approximations: filter design and asymptotic equivalence with Shannon’s sampling theorem, IEEE Transactions on Information Theory, 38 (1) (1992) 95–103.
H. Jiang, Y. Xia and X. Wang, Rolling bearing fault detection using an adaptive lifting multiwavelet packet with a 1 1 2 dimension spectrum, Measurement Science & Technology, 24 (12) (2013) 125002–125011.
N. Tandon and A. Choudhury, An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect, Journal of Sound and Vibration, 205 (3) (1997) 275–292.
K. Ding, M. Xie and Z. J. Yang, The theory and technology of discrete spectrum correction, Beijing, China: Science Press (2009) 101–110.
X. He et al., Spatial filtering velocimeter using frequency shifting by the method of rotating kernel, Measurement, 73 (2015) 15–23.
K. Ding and L. Q. Jiang, Energy centrobaric correction method for discrete spectrum, Journal of Vibration Engineering, 14 (3) (2001) 354–358.
J. Luo and M. Xie, Phase difference methods based on asymmetric windows, Mechanical Systems & Signal Processing, 54–55 (2015) 52–67.
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Gyuhae Park
Qing Xiong received his Ph.D. from Southwest Jiaotong University, China in 2015. He is currently a lecturer at the School of Automobile and Transportation, Xihua University, China. His current research interests are the fault diagnosis of mechanical systems using numerical simulation and signal-processing techniques.
Rights and permissions
About this article
Cite this article
Xiong, Q., Zhang, W., Xu, Y. et al. Diagnosing axle box bearings’ fault using a refined phase difference correction method. J Mech Sci Technol 33, 95–108 (2019). https://doi.org/10.1007/s12206-018-1210-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-1210-9